Insert

• 

  Thread Inserts

  MISUMI

  [Specification expansion] In response to many requests, a new standard product is now available! *Please see the specification table or model number list for applicable products.
  [Handling Standards] Coarse M diameter: 2, 2.2, 2.5, 2.6, 3, 3.5, 4, 5, 6, 8, 10, 12, 14, 16, 18, Fine M diameter: 6, 8, 10, 12, 14, 16, 18
  You can purchase from 1 piece!
  
  Application: Strengthens the female thread of the base.
  Features: Durable screw connection. You can create a concise design.
  Material: SUS304.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Self-Tapping Inserts - Slotted

  MISUMI

  This is a tapping insert with split groove and has threads on both inner and outer diameters.
  Fastening parts that do not require a front power strip to compensate for the mechanical strength of thread sections made of materials with relatively low strength.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Recoil-Free (mm) SUS304【1-3 Pieces Per Package】

  RECOIL

  Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.

  Days to Ship:	Same day or more

• 

  Recoil-Free (Specified mm) SUS304

  RECOIL

  The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.

  Days to Ship:	11 Day(s) or more

• 

  Sprew Insertion Tool (P Type)

  NIPPON SPREW

  [Features]
  · The internal thread guide at the tip of the tool can be adjusted to make the insertion work smoothly.
  · Depth of insertion can be kept constant with the stopper collar.
  · With the effectiveness of internal thread guide, it can be inserted easily.
  · Rotate the handle clockwise and insert it into the threaded hole.
  [Use]
  · Sprew insertion.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Tangless Insert Metric Coarse

  ACCURATE

  An insert with no tang that does not require folding to remove. A product that eliminates the time and cost required to perform the insertion operation that would otherwise be needed when tangs are present.

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Brass Insert Nut (Screw-In Type / Slotted) IRB-S/IRB-SC

  HIROSUGI-KEIKI

  [Nominal designation of thread (M)] 2.6/3/4/5/6/8
  [Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
  [Treatment] Nickel plating (Ni)/degreasing

  Days to Ship:	15 Day(s) or more

• 

  Recoil Packet (Milli)【10 Pieces Per Package】

  RECOIL

  [Type] Threaded Insert Use
  [Application] Light Metal
  [Materials] SUS304 with Notch
  [Application] Light Metal
  [Screw type] Coarse/Fine Screw Diameter (after insertion) 2 2.2 2.5 3 3.5 4 5 6 7 8 9 10 11 12 14 16 18 20 Length (after insertion)
  [L](D = screw diameter M) 1D 1.5D 2D
  [Sales unit] Minimum Quantity (Available for Purchase from 1 pc) Box and Pkg.
  [Pitch (mm)] 0.4 0.45 0.5 0.6 0.7 0.8 1.0 1.25 1.5 1.75 2.0 2.5 Usage Environment: Internal Combustion Engines/Manufacturing Equipment Quantity 5 10

  Days to Ship:	16 Day(s) or more

• 

  Lock Recoil (mm) SUS304

  RECOIL

  Recoil lock type insert designed to stop bolts from loosening during severe vibration or temperature changes.

  Days to Ship:	8 Day(s) or more

• 

  Insert, Inconel X-750

  RECOIL

  The color of the main body will become silver when the method of heat treatment changes.
  
  Not plated. (Inconel Black Recoil)
  An insert (Helisert/Sprue) for use at high temperatures (425–550°C) and with non-magnetic applications.
  
  [Features]
  · Nickel alloy.
  · For use at high temperatures (425–550°C [800–1,000°F]) and with non-magnetic applications.

  Days to Ship:	11 Day(s) or more

• 

  Techlock (SL)【1-5,000 Pieces Per Package】

  JAPAN DRIVEIT

  [Type] Press Fit
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
  [L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
  [Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8

  Days to Ship:	14 Day(s) or more

• 

  Thread Insert Removal Tool

  MISUMI

  Extraction tool for threaded inserts

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Thread Insert (Box)【100 Pieces Per Package】

  MISUMI

  For in-house inventory or for a large number of uses, purchasing by the carton is advantageous.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Recoil Insert Thread (Coarse) EA949VD-12L【10 Pieces Per Package】

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Dim.…M12-1.75
  ・Length (mm)…24
  ・Qty. per unit…10

  Days to Ship:	16 Day(s) or more

• 

  Brass Insert Nut (Screw-In Type) IRB/IRB-C

  HIROSUGI-KEIKI

  [Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
  [Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
  [Treatment] Nickel plating (Ni)/degreasing

  Days to Ship:	15 Day(s) or more

• 

  Tangless Insert, Metric-Size Dedicated Extraction Tool

  ACCURATE

  Dedicated insertion tool for tangless insert. Can also be attached to dedicated power tools and doesn't scratch the parent material.

  Days to Ship:	10 Day(s) or more

• 

  Thread Insert Installation Tool

  MISUMI

  [Specification expansion] In response to many requests, a new standard product has been released!

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Self-Tapping Inserts - Hand Tools for Self-Tapping Inserts

  MISUMI

  Compatible threaded inserts are M3, 4, 5, 6, 8, 10 and 12.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Tangless Inserts Installation/Removal Tools

  MISUMI

  Due to changes in manufacturer standards, the color of the cap may vary. Thank you for your understanding. There is no change in performance.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Tangless Insert, Insertion Tool

  ACCURATE

  A tangless insert metric coarse insertion tool.

  Days to Ship:	16 Day(s) or more

• 

  E-Certs

  TSUGAMI

  Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.

  Days to Ship:	16 Day(s) or more

• 

  Tangless Insert (SUS304)

  RECOIL

  [Features]
  ·The stress is dispersed throughout the entire engagement length, does not incur screw thread breaks, has increased holding power or tensile strength, and has greater fastening power than the original screw.
  ·Dedicated tools enable the insertion and extraction without tangs.
  ·Extraction will not damage the male threads nor the product.
  ·You don't have to tear off the tang, look for the broken tang, or check the gauge.

  Days to Ship:	11 Day(s) or more

• 

  Recoil Packet (METRIC)【10 Pieces Per Package】

  RECOIL

  [Features]
  · The recoil is created by coiling a high quality stainless steel wire with rhomboid cross section into a spring-like shape.
  · The insert is slightly larger than the tap hole of the other base metal, and can be attached by lightly narrowing down.
  · Once equipped, its spring effect makes it almost permanently non-extractable.

  Days to Ship:	11 Day(s) or more

• 

  Flat Head Sonic Lock (Type SHK)

  JAPAN DRIVEIT

  [Type] Press Fit
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 3, 4, 5, 6, 8, Length (following insertion)
  [L](D = screw diameter M) 1.5D 2D

  Days to Ship:	14 Day(s) or more

• 

  Tangless insert metric coarselocking

  ACCURATE

  A tangless insert with a function that prevents loosening. The center of this material is hexagonal shaped to prevent loosening.

  Days to Ship:	8 Day(s) or more

• 

  Tangless insert unified insertion tool (for locking)

  ACCURATE

  A dedicated locking-type insertion tool.

  Days to Ship:	12 Day(s) or more

• 

  Male Screw Repair Coil Thread -R【20 Pieces Per Package】

  KS SANGYO

  Insert screw that can be inserted and removed easily and smoothly.
  [Features]
  · Ready-to-use screw insert, compatible with the tools you have at hand.
  · The sampling notch makes it unnecessary to forcibly pull out to avoid damaging the base material.
  [Applications]
  · For reinforcement of materials such as aluminum and plastic where female threads have low strength.
  · Weight reduction is possible since it can be inserted into the base material of materials prone to female screw breakage.
  · For countermeasures against vibration and reinforcement of spots where strong vibration is present, such as with industrial machinery and the engines of vehicles or motorcycles.
  · Repairs and reforms broken, worn out, and crushed female threads.

  Days to Ship:	16 Day(s) or more

• 

  Insert Nut, Screw-in Type, Insertion Jig, Dedicated for Without Slot / IR-00

  HIROSUGI-KEIKI

  * Only products without slits can be used.
  Applicable Product Numbers: IRB-W, IRB-CW, IRB, IRB-C, IRU-W, IRU, IRL-KW, IRL-BW, IRL-K, IRL-B

  Days to Ship:	15 Day(s) or more

• 

  Thread Inserts/Tangless

  MISUMI

  There is no need to break the tongue after insertion, making the insertion process easy
  [Specification expansion] In response to many requests, a new standard product has been released! *Please see the specification list or catalog PDF for applicable products.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  E-SERT P Type Insertion Tool

  TSUGAMI

  A general insertion tool that even beginners can use to perform easy insertion. Available in sizes of M 2.5 mm or larger for both coarse and fine threads. Sizes under 8 mm are available for standard threaded inserts and locks.

  Days to Ship:	16 Day(s) or more

• 

  Sprue【1-100 Pieces Per Package】

  NIPPON SPREW

  Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.

  • Volume Discount

  Days to Ship:	13 Day(s) or more

• 

  E-Sert Unified (UNC)

  TSUGAMI

  Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.

  Days to Ship:	16 Day(s) or more

• 

  Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  These inserts are the best choice for easy and secure fitment into plastic holes.

  • Volume Discount

  Days to Ship:	16 Day(s) or more

• 

  Dodge Insert Flange Type (Brass Cadmium-Less)【1-600 Pieces Per Package】

  TOKAI METAL INDUSTRY

  Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.

  Days to Ship:	16 Day(s) or more

• 

  DODGE BET Insert (Standard), Double Sided Chamfer Type, Brass (Cadmium-Free)【1-15,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  General purpose type. Low cost and well balanced.

  Days to Ship:	16 Day(s) or more

• 

  Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  A general-purpose well-balanced screw insert with low cost.
  [Features]
  ・ At the time of press-fit, the product has direction.
  ・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.

  Days to Ship:	16 Day(s) or more

• 

  Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  General purpose type. Low cost and well balanced.

  Days to Ship:	16 Day(s) or more

• 

  Trade Series Recoil Kit (Milli)

  RECOIL

  Includes an insertion tool with tap handle functionality. A magnet-type extraction tool has also been set together with this.

  Days to Ship:	Same day or more

• 

  Recoil Tap

  RECOIL

  [Features]
  · Recoil taps differ from ordinary taps, designed for exclusive use with screw thread inserts (STI). They have a large diameter but the same pitch as a standard tap in order to accommodate the Recoil Inserts.
  · Recoil Taps are manufactured to precise standards from High Speed steel (HSS or HSS-E) with ground threads and are available in Intermediate and Bottoming leads.
  · In addition to hand taps, Spiral Point and Spiral Flute machine taps are also available for mass production purposes. In addition, for all spark plug applications pilot nose taps are available, which do not require a special recoil drill. The Recoil thread inserts when installed into a correctly tapped hole will provide the applicable internal thread tolerance for the installed bolt.
  · Intermediate tap...The most commonly used tap, mainly used for through hole applications. 4 -thread lead.
  · Bottoming tap...Used when tapping to the bottom of a blind hole. 2-Thread lead, and is normally used after a taper tap or intermediate tap.

  Days to Ship:	11 Day(s) or more

• 

  Recoil-Free (UNF) SUS304

  RECOIL

  The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.

  Days to Ship:	11 Day(s) or more

• 

  Insert Phosphor Bronze

  RECOIL

  Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).

  Days to Ship:	11 Day(s) or more

• 

  Recoil Kit with Pilot Tap

  RECOIL

  A male screw repair kit for individual recoils that is widely used throughout the world in repair and maintenance associated with industrial machinery, automobiles, and motorcycles.

  Days to Ship:	10 Day(s) or more

• 

  Ensat Expanded Slot Type, Model 302

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  Days to Ship:	14 Day(s) or more

• 

  Ensat, Type 308, 3-Hole / Long Size

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  Days to Ship:	14 Day(s) or more

• 

  Ensat Extra Coarse External Thread Type, Model 309

  KKV

  Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.

  Days to Ship:	14 Day(s) or more

Loading...