Other Pneumatic Related Devices

• 

  Air Tank VBAT Series

  SMC

  The Air Tank VBAT Series allows for compact connections with booster regulators.
  [Features]
  · Can also be used alone as a tank.
  · Does not fall under the Japanese Construction Code for Second Class Pressure Vessels.
  · Partially compatible with some international standards.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Booster Regulator VBA Series

  SMC

  The Booster Regulator VBA Series features air-only operation, so no electricity is needed. Furthermore, it is also easy-to-install and also generates only low amounts of heat.
  [Features]
  · Floating piston structure.
  · Metal noise reduced by the implementation of a damper on the impact part of the switching valve.
  · The high noise-reduction silencer reduces exhaust noise.
  · Features a built-in mesh filter at the IN port, preventing operation failure due to contamination by foreign matter.
  · The air-feeding tube is integrated with the main tube, mitigating condensation caused by cooling during exhaust expansion.
  · Standard fittings can be used, enabling remote pressure monitoring, etc.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Electro-Pneumatic Positioner IP8000/8100 Series (Lever Type / Rotary Type)

  SMC

  [Features]
  ・ Dust-proof/waterproof
  ・ Explosion-proof structure
  ・ Monitoring function
  ・ With internal opening display board
  ・ With external scale plate (Rotary type, rear mounting)

  Days to Ship:	15 Day(s) or more

• 

  Mistresa Consumables

  SHOWADENKI

  High-quality Mistresa consumables manufactured by Showa Denki in Japan · Compensation efficiency is good, simple clogging check.

  Days to Ship:	16 Day(s) or more

• 

  Transmitter / AND Valve With One-Touch Fitting, VR1211F Series

  SMC

  Transmitter / AND Valve With One-Touch Fitting, VR1211F Series for controlling pneumatic signal lines.
  [Features]
  · Proof pressure: 1.5 MPa.
  · Maximum operating pressure: 1.0 MPa.
  · Minimum operating pressure 0.05 MPa.
  · Ambient and working fluid temperature: -5 to 60°C (no freezing).
  · Applicable tubing material: nylon, soft nylon, polyurethane.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Lock-Up Valve IL201/211/220 Series

  SMC

  Lock-Up Valve IL201/211/220 Series.
  [Features]
  · Single acting / double acting: Keeps the operating part in position as an emergency measure until the air source is returned to its normal state.
  · 3-way type: Designed so that the supply port changes if there are any irregularities.
  [Applications]
  · Use when there are air source or air supply piping irregularities in the pneumatic process control lines.

  Days to Ship:	15 Day(s) or more

• 

  Impulse Lubricator ALIP1000/1100 Series

  SMC

  [Features]
  · Intermittent discharge of small yet constant amounts to the sliding parts.
  · Directly supplies a constant amount of oil just before the lubrication point.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Pressure accumulator, CRVZS Series

  FESTO

  Days to Ship:	4 Day(s) or more

• 

  Pneumatic-Pneumatic Positioner IP5000/5100 Series (Lever Type / Rotary Type)

  SMC

  [Features]·JIS F8007 IP55. ·Connection port size 1/4. ·The screw type can be specified by model selection.

  Days to Ship:	15 Day(s) or more

• 

  Cylinder Positioner IP200 Series

  SMC

  SMC Cylinder Positioner IP200 Series.
  [Features]
  ・ Servo mechanism enables stable and accurate control of cylinder position
  ・ It can also be used for cylinder position control of general industrial machine

  Days to Ship:	15 Day(s) or more

• 

  Booster Relay IL100 Series

  SMC

  [Features]
  · Used when the piping distance from the instrument to the operation part is very long or when the capacity of the operation part is large.
  · Drive speed of the operation part has been greatly improved.

  Days to Ship:	15 Day(s) or more

• 

  Relay Equipment Shuttle Valve with Quick-connect Fitting VR1210F/1220F Series

  SMC

  A relay device for controlling the pneumatic signal line. Metric and inch sizes are available.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Linear Guide Lock LMB Series

  CKD

  Compact but powerful holding force. No backlash when locked. Can be used for holding when stopped, emergency stop or fall prevention. Note: CAD data of this series is being revised. Please wait till the corrections are done.

  CAD ：

  2D / 3D

  Days to Ship:	25 Day(s) or more

• 

  Relay Valve VR4151/4152 Series

  SMC

  SMC relay valve.
  [Features]
  · Carries out fixed operational sequences based on the pneumatic signal received from the mechanical valve.
  · Equivalent operation to an auxiliary relay in an electrical system.
  [Specifications]
  · Usable fluids: air
  · Operating pressure: 0 to 1.0 MPa
  · Pilot pressure: 0.15 to 1.0 MPa
  · Ambient and operating air temperature: -5 to 60°C (no freezing)
  · Lubrication: Not required (Use turbine oil Class 1 ISO VG32, if lubricated)
  

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Transmitter / Time Delay Valve VR2110 Series

  SMC

  Transmitter / Time Delay Valve VR2110 Series operates in a similar way to an electrical time delay relay.
  [Features]
  · The combination of an adjustable orifice and fixed flow allows the transmission of a pneumatic signal after a fixed time period (delay).

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Mist Spray Unit LMU100/200 Series (LMV/LMH/LMD)

  SMC

  SMC Mist Spray Unit LMU100/200 Series (LMV/LMH/LMD9).
  [Features]
  · Intermittent spray for cutting, press gear chains, etc.
  · Mist spray unit: Designed so that oil and air can be sent to the mixing valve.
  · Mixing valve: Oil and air volumes sent by the mist spray unit can be adjusted with the oil and air needles.
  · The mixing valve also discharges oil mist from the nozzle.
  · Magnet holder: Allows the mixing valve to be freely attached to iron and steel parts on machine tools, etc.
  [Applications]
  · Use for standing type machining centers (drilling centers) and horizontal machining centers.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  LVW Series PVC Quick Drain Valve

  SMC

  LVW Series PVC Quick Drain Valve enables easy piping with union connection.
  [Features]
  · Compatible fluids: deionized water, chemicals.

  CAD ：

  2D / 3D

  Days to Ship:	Quote

• 

  Smart Positioner IP8001/8101 Series (Lever Type / Rotary Type)

  SMC

  Equipped with a microcomputer and sensor, it allows for changing and monitoring various parameters easily from remote location.
  [Features]
  · Dust-proof / waterproof performance.
  · Explosion-proof structure.
  · Monitoring function.
  · With internal opening indicator plate.
  · With external scale plate (rotary type, back side mounting).
  · Possible to set various parameters easily by using the built-in push buttons.
  · Zero/Span adjustment is easier than conventional mechanical positioners.
  · Output function has been enhanced.
  · Control status is indicated.
  · Supports 2-wire input of existing equipment.
  · HART communication function
  · Mounting compatibility.
  · Energy saving.

  Days to Ship:	15 Day(s) or more

• 

  Electro-Pneumatic Transducer, IT600 Series

  SMC

  [Features]
  ·Can output air pressure proportional to the current signal
  ·Wide output pressure range / 0.02 to 0.6 MPa
  ·Independent electrical equipment / pressure-resistant and explosion-proof structure
  ·Smooth span adjustment

  Days to Ship:	15 Day(s) or more

• 

  Rechargeable Battery Compatible Air Tank 25A-VBAT Series

  SMC

  [Features]
  · In order to reduce product defects in the manufacturing process of rechargeable batteries, materials containing copper (cu) and zinc (zn) as main components are not used.
  *Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (cu) and zinc (zn) as additive elements.
  · Neither electrolytic nickel plating with copper base or zinc plating is used.
  *Electroless nickel plating is used.
  · The use of low dew point compatible grease allows it to operate at -70°C. Performance under low dew point environments has been improved.

  Days to Ship:	67 Day(s) or more

• 

  Air tank(related equipment)AT series

  CKD

  Compact air tank that can be directly connected to the ABP-12 air booster. Note: CAD data of this series is being revised. Please wait till the corrections are done.

  Days to Ship:	25 Day(s) or more

• 

  Air lamp AL series

  CKD

  Note: CAD data of this series is being revised. Please wait till the corrections are done.

  Days to Ship:	11 Day(s) or more

• 

  Pell Stystem Detection NozzleAPA4 Series

  CKD

  Air sensor that blows detected air onto a workpiece and converts the generated back pressure into an empty electric signal. Not affected by supply pressure fluctuation with the adopted pneumatic bridge circuit.
  Note: CAD data of this series is being revised. Please wait till the corrections are done.

  Days to Ship:	16 Day(s) or more

• 

  Small size air lamp SAL series

  CKD

  Note: CAD data of this series is being revised. Please wait till the corrections are done.

  Days to Ship:	10 Day(s) or more

• 

  Mistresa Optional Parts (Dedicated Filter, Switch, Hose, etc.)

  SHOWADENKI

  High-quality Mistresa manufactured by Showa Denki in Japan optional parts (dedicated filter, switch, hose etc.)· Mistresa aids.

  Days to Ship:	23 Day(s) or more

• 

  Jet Drain Pipe Cleaner EA340AS

  ESCO

  【Product Specifications】
  ・Drains are cleaned with the force of water sucked into a pipe and then discharged.
  ・Full length-Around 380mm
  ・Rubber adapter-Dia. 55mm, dia. 70mm, dia. 45 to 90mmWith 1 for each

  Days to Ship:	16 Day(s) or more

• 

  Suction Type Drain Pipe Cleaner EA340BS

  ESCO

  【Product Specifications】
  ・Drain is cleaned with the force of air compressed with the handle.
  ・Rubber adapter-Dia. 70mm, dia. 150mm, 1 each
  ・Full length-430mm

  Days to Ship:	16 Day(s) or more

• 

  Suction Pump (for Drain Hose), Compatible Hose Inner Diameter: ⌀14·16 mm

  ESCO

  【Product Specifications】
  ・Applicable hose ID-dia.14mm, dia.16mm
  ・Length-430mm
  ・Removes impurities in drain hose

  Days to Ship:	16 Day(s) or more

• 

  Suction Pump (for Drain Hose), Compatible Hose Inner Diameter: ⌀14 to 21 mm

  ESCO

  【Product Specifications】
  ・Applicable hose ID-14 to 21mm
  ・Full length-400mm
  ・Eliminates sludge clogging only by inserting into the drain port and moving forward and backward.

  Days to Ship:	16 Day(s) or more

• 

  Adapter (for EA455) EA455-1

  ESCO

  Adapter for ESCO New Air Cut Valve EA455.

  Days to Ship:	16 Day(s) or more

• 

  Adapter (for EA455) EA455-2

  ESCO

  【Product Specifications】
  ・Pipe dim.…40A

  Days to Ship:	17 Day(s) or more

• 

  Exhaust Fan EA897EN-130

  ESCO

  【Product Specifications】
  ・Power supply-AC100V(50/60Hz)
  ・Power consumption- 50Hz：[high]23.5W、[low]22.0W 60Hz：[high]26.5W、[low]23.0W
  ・Airflow- 50Hz：[high]882m3/h、[low]756m3/h 60Hz：[high]918m3/h、[low]756m3/h
  ・Dim.-352×135×362mm
  ・Blade dia.-250mm
  ・number of fans-5
  ・Applicable dia.-30cm square
  ・Material-Body：Steel plate、Fan：Aluminium
  ・Pull string switch
  ・Two speed type(high・low)
  ・Ideal for kichen hood

  Days to Ship:	16 Day(s) or more

• 

  100 V AC / ø25 cm (Vane Diameter) Metal Exhaust Fan Pull Switch

  ESCO

  【Product Specifications】
  ・Power supply-100VAC
  ・Interlock shutter
  ・Pull string switch
  ・Cover dim.--25： 302 x 35 x 314mm-30： 352 x 39 x 364mm, -35A： 402 x 37 x 420.5mm, -30HA： 362 x 45 x 350mm
  ・-30HA is long life type Blade： aluminum
  ・Capacity…6 to 8mat
  ・Implanting dim.…30cm square
  ・Noise…38.5dB
  ・Weight…3.4kg

  Days to Ship:	16 Day(s) or more

• 

  Transmitter / Pneumatic-Electric Relay VR3200/3201 Series

  SMC

  The Pneumatic-Electric Relay VR3200/3201 Series converts pneumatic signals to electrical signals.
  [Features]
  · Operating pressure: 0.1 to 1.0 MPa.
  · · Ambient and operating air temperature: -5 to +60°C (no freezing).
  · Contacts: 1ab.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Transmitter / Pneumatic Indicator VR3100 Series

  SMC

  Transmitter / Pneumatic Indicator VR3100 Series indicates the presence of pneumatic pressure.
  [Features]
  · Equivalent to lamps in an electrical system.
  · Operating pressure 0.1 to 0.8 MPa.
  · Ambient and operating air temperature: -5 to +60°C (no freezing).
  · Operating frequency: 100 c.p.m or less.

  Days to Ship:	Same day or more

• 

  Transmitter / Miniature Pneumatic Indicator VR3110 Series

  SMC

  It is an ultra-compact air indicator light to know if there is air pressure.
  [Features]
  ・ It is equivalent to an electric pilot lamp
  ・ Working pressure 0.15 to 1.0 MPa
  ・ Ambient temperature and use air temperature -5 to +60°C (However, do not freeze)
  ・ Operating frequency less than 300 c.p.m

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Two Hand Control Valve VR51 Series

  SMC

  Two Hand Control Valve, VR51 Series - outputs with two-handed simultaneous operation (within 0.5 s).
  [Features]
  · EN574 standard compliant.
  · Prevents accidents whereby the operator's hands get caught or trapped by requiring both hands to initialize operations.
  [Applications]
  · Riveting, press fitting work.
  · Clamping.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  AEP100-02 Exhaust Pressure Type Liquid Collector

  SMC

  Exhaust pressure type liquid collector uses exhaust pressure to collect and reuse leaked lubricant and hydraulic fluid.
  [Features]
  ・ It prevents waste by collecting expensive hydraulic oil and lubricant oil that have leaked and accumulated around the machine
  ・ It realizes energy saving because the discharged air that is released into the atmosphere from the switching valve is used for collection
  ・ It is streamlined by eliminating manual collection and hand-wiping work

  CAD ：

  2D / 3D

  Days to Ship:	Same day

• 

  Liquid Collector Ejector Type HEP500-04 Series

  SMC

  Resource and labor saving - Collects and reuses leaked fluids such as valuable cutting oil and grinding oil.
  [Features]
  · Collects leaked fluids such as valuable cutting oil and grinding oil.
  · No need for workers to carry out collection work.
  · Compact and easy to mount and operate.
  · Can be driven by a pre-installed pump.

  CAD ：

  2D / 3D

  Days to Ship:	Same day

• 

  Relay Equipment Shuttle Valve VR1210/1220 Series

  SMC

  [Features]
  ・ It is a relay device for controlling the pneumatic signal line.
  ・ This valve is also called an OR valve, and when air is supplied to either of the IN sides, it is output from OUT.
  ・ For different pressures, the pressure from the high pressure side is output to the OUT side.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Valve Positioners, CMSX Series

  FESTO

  Days to Ship:	15 Day(s) or more

• 

  ATEX Directive, Booster Valve 56-VBA Series

  SMC

  [What is the ATEX directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of static charge
  ・ Ignition prevention of sparks caused by friction, impact, and wear
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone / category division
  In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
  ・ Zone 0: Category 1
  Probability of explosive atmosphere (Zone): Continuous or long time > 1,000 hours/year
  ・ Zone 1: Category 2
  Probability of explosive atmosphere (Zone): Occasionally 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s)

• 

  Rechargeable Battery Compatible Booster Valve 25A-VBA Series

  SMC

  [Features]
  · In order to reduce product defects in the manufacturing process of rechargeable batteries, materials containing copper (cu) and zinc (zn) as main components are not used.
  *Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (cu) and zinc (zn) as additive elements.
  · Neither electrolytic nickel plating with copper base or zinc plating is used.
  *Electroless nickel plating is used.
  · The use of low dew point compatible grease allows it to operate at -70°C. Performance under low dew point environments has been improved.
  
  * Pressure gauge installation: G43-10-01-X300 / G46-SRB pressure gauges cannot be mounted to
  the booster valve (25A-VBA10A) as they will interfere with the handle of the booster valve, or interfere each other with the booster valve 25A-VBA20A/40A.
  To install, use piping materials to avoid any interference among products.

  Days to Ship:	67 Day(s) or more

• 

  ATEX Directive Cylinder Positioner 56-IP200/56-IP210 Series, ATEX Category 3

  SMC

  [What is the ATEX Directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  All equipment within the scope of the Directive must bear the CE marking and comply with the directive's requirements. ATEX Directive incorporates conventional European standards for explosion-proof equipment.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  · Prevention of static charge
  · Prevention of spark ignition caused by friction, impact, and abrasion
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone/Category
  The ATEX classifies the applicable equipment used in respective hazardous areas (zones) into the categories.
  · Zone 0: Category 1
  A place in which an explosive atmosphere may occur is (zone): present continually or for a long time, > 1,000 hours/year
  · Zone 1: Category 2
  A place in which an explosive atmosphere may occur is (zone): present occasionally or 10 to 1,000 hours/year
  · Zone 2: Category 3
  A place in which an explosive atmosphere may occur is (zone): less likely present or for a short time < 10 hours/year

  Days to Ship:	20 Day(s)

• 

  Identification Holder, CAFC Series

  FESTO

  Days to Ship:	25 Day(s)

Loading...