FRL Units（Connection Dia.：Rc3/8）

• 

  Filter Regulator AW20 to 60-B, Filter Regulator With Backflow Function AW20K to 60K-B

  SMC

  Filter regulators and filter regulators with backflow function, with both filter and regulator integrated in one unit.
  [Features]
  · Helps save on space, and requires less piping.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Filter Regulator AW10-A To AW40-A

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle
  · Without corrosion. The use of a resin body ensures there is no rusting.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Air Combination, Air Filter + Regulator + Lubricator, AC10-A to AC40-A

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  3-Port Valve for Releasing Residual Pressure With Keyhole (Single Action) VHS20/30/40/50

  SMC

  Conforming To OSHA Standard, Pressure Relief 3-Port Valve (Single Action) With Locking Holes by SMC.
  [Features]
  · The safety-measure manually operated valve can be used to prevent accidents caused by residual pressure in pneumatic lines.
  · Designed so that the supply and exhaust status of the air flow can be checked at a glance.
  · When residual pressure is being released, the valve handle can be locked in position to prevent accidental operation.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Soft Start-Up Valve AV2000/3000/4000/5000 Series

  SMC

  Low Power Consumption Soft Start-Up Valve AV2000/3000/4000/5000 Series
  [Features]
  ・ A low-speed air supply that gradually raises the initial pressure of the pneumatic system, and a start valve that shuts off the air supply and enables rapid exhaust.
  ・ With air supply / exhaust function by manual operation

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Conditioning Equipment Multi Series, Filter Regulator FR Series

  KOGANEI

  FRL unit equipped with a pressure gauge with a reset marker as standard equipment.
  [Features]
  ·Compact integration of 5 µm air filter and regulator
  ·Equipped with a pressure gauge with a preset marker as standard equipment
  ・ Low pressure and built-in check mechanism were made into series
  ·Drain cock with fitting and auto condensate type drain cock are optional items
  [Applications]
  ・ Compatible with pneumatic equipment and production lines in all industries

  Days to Ship:	16 Day(s) or more

• 

  Air Combination, Filter Regulator + Lubricator AC20A-B To AC60A-B Series

  SMC

  [Features]
  · Improved visibility and environmental resistance.
  · The bowl is completely covered by transparent bowl guard.
  & nbspThe inside can be seen from all angles (360°).
  & nbspThe bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  & nbspThe element and bowl are combined into one unit, making it possible to replace the element by hand.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Air Combination, Filter Regulator + Lubricator, AC10A-A To AC40A-A

  SMC

  Air Combination Filter Regulator + Lubricator with a bowl that is completely covered by transparent bowl guard.
  [Features]
  · The inside can be seen from all angles (360°).
  · The bowl is protected from the external environment, ensuring high levels of safety.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Air Combination Air Filter + Regulator + Lubricator ACG20/30/40

  SMC

  Air Combination Air Filter + Regulator + Lubricator with no need to cut a panel for the pressure gauge.
  [Features]
  · Improved visibility of the pressure gauge at various mounting locations.
  · One-touch installation and removal of the pressure gauge cover.
  · The mounting angle of the pressure gauge can be selected according to the piping direction.
  · Pressure gauge anti-rotation mechanism.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  FRL Combination (Modular Type Standard) C*000/C*500 Series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Compact modularization: Design for each F.R.L device focused on making it more compact. Assembled dimensions are accurately calculated with a simple calculation.
  · Lightweight: The material combination allows for both strength and low weight.
  · Long life element: The elements are constructed from a unique fiber structure that is rough on the surface and becomes finer the further inward it goes (PAT.PEND). Almost no clogs. No rust concerns.
  · Space-saving embedded pressure meter: Past models had a pressure meter that stuck out of the front surface, wasting space or being at risk of striking the employees. This embedded design is both clean and an improvement to safety.
  · Prevents oil drips when reverse pressure is applied such as when residual exhaust valves release pressure.
  · Taking safety into further consideration, this device is equipped with a corrosive resistant plastic bowl.
  · Gauge plug is sealed even here a pipe plug is not installed.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Modular type FRL combination standard white series

  CKD

  Boost your system with modularization. Dual element construction provides long life.
  Choose from over 1000 in stock models, such as those with attached pressure meters, from our website.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Air Combination, Filter Regulator + Mist Separator, AC20D-A To AC40D-A

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Air Combination, Air Filter + Regulator + Lubricator AC20-B to AC60-B Series

  SMC

  [Features]
  ・ Improved visibility and environmental resistance
  · The transparent case guard covers the entire circumference of the case.
  · The inside can be seen from all angles (360°).
  ・ Protects the case from the external environment and improves safety
  ・ Improved workability
  ・ By integrating the element and the case, the element can be replaced at hand.
  ・ Reduction of maintenance space

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Air Combination, Air Filter + Regulator, AC10B-A to AC40B-A

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Air Combination, Filter Regulator + Mist Separator AC20D-B To AC40D-B Series

  SMC

  [Features]
  · Improved visibility and environmental resistance.
  · The bowl is completely covered by transparent bowl guard.
  & nbspThe inside can be seen from all angles (360°).
  & nbspThe bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  & nbspThe element and bowl are combined into one unit, making it possible to replace the element by hand.
  · The amount of space required for maintenance has been reduced.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Service Units/Regulator/Filter

  MISUMI

  An air conditioning equipment set (FR) with an air filter and a pressure regulating valve.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Refining Equipment Multi Series FRL Combination

  KOGANEI

  The most reasonable modular type refining system. Note: CAD data of this series is being revised. Please wait till the corrections are done.

  Days to Ship:	16 Day(s) or more

• 

  [Stock] Filter Regulator (Modular Standard) W*000 Series

  CKD

  Modular type filter and regulator.
  [Features]
  ・ Compact modularization: Modular design that unifies the main dimensions (width and depth) of each FRL device compactly.
  ・ Assembled dimensions are accurately calculated with a simple calculation.
  ・ The element with long service lifespan incorporates a unique chemical fiber structure that is rough on the surface and becomes finer the further inward it goes.
  ・ Greatly reduced clogs and greatly improved element service lifespan.
  ・ No rust concerns.
  ・ Space saving recessed pressure gauge: Past models had a pressure gauge that stuck out of the front surface, wasting space or being at risk of striking the employees. This recessed design is both clean and an improvement to safety.
  ・ Weight is reduced by 50% (compared to C4000) compared to past models.
  [Applications]
  ・ Clean air, oil-less air, etc. can be supplied depending on the applications and purposes.

  • STOCK

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  FR Combination (Modular Type Standard) C*020 / C2520 Series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Design for each F.R.I device focused on making it more compact. Assembled dimensions are accurately calculated with a simple calculation.
  · Maintained strength from previous models and decreased weight by 50% (compared to C4000) by using a combination of materials (body is aluminum die cast, cover is resin).
  · The elements are constructed from a unique fiber structure that is rough on the surface and becomes finer the further inward it goes (PAT.PEND). Greatly reduced clogs and greatly improved product life. No rust concerns.
  · Past models had a pressure meter that stuck out of the front surface, wasting space or being at risk of striking the employees. This embedded design is both clean and an improvement to safety.
  · Prevents oil drips when reverse pressure is applied such as when residual exhaust valves release pressure.
  · Taking safety into further consideration, this device is equipped with a corrosive resistant plastic bowl.
  · Gauge plug is sealed even here a pipe plug is not installed.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Modular type WL combination standard white series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Its elasticity and flexibility allows it to be used for piping in even tight spaces.
  · TAC duct aluminum can shrink to 1/5 of its length, and TAC duct aluminum 2 can shrink to 1/10 of its length. This allows it to be stored compactly so it does not take up much storage space.
  · Can withstand bending multiple times and is resistant to heat (up to 80°C)

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  FRL compact unit coaxial type

  TRUSCO NAKAYAMA

  [Features]
  · A compact unit that brings an air filter, regulator, and lubricator into one coaxial unit with two bottle types.
  · Stabilizes air pressure while removing debris from the air. Also provides lubrication.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Mist Separator Regulator AWM20 to 40/Micro Mist Separator Regulator AWD20 to 40

  SMC

  SMC Mist Separator Regulator.
  [Features]
  · The AWM Series combines a regulator and mist separator into one unit. Use for clean air blowing applications. (Filtration: 0.3 μm)
  · The AWD Series combines a regulator and micro-sized mist separator into one unit. Use for ultra-clean air blowing applications. (Filtration: 0.01 μm)

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Air Combination, Air Filter + Regulator AC20B-B to AC60B-B Series

  SMC

  FRL unit with improved workability
  [Features]
  ・ Improved visibility & environmental resistance
  · The transparent case guard covers the entire circumference of the case.
  ・ 360° visual confirmation is possible.
  ・ Protects the case from the external environment and improves safety
  ・ Improved workability
  ・ By integrating the element and the case, the element can be replaced at hand.
  · The amount of space required for maintenance has been reduced.
  
  [20-Series Copper/Fluorine-Free Specifications]
  ・ Suitable for use in environments that dislike copper and fluorine materials.
  ・ External dimensions are the same as standard products.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Air Combination, Air Filter + Mist Separator + Regulator, AC20C-B To AC40C-B

  SMC

  Air combination with better visibility and environmental resistance.
  [Features]
  · The bowl is completely covered by a transparent bowl guard.
  · The inside can be seen from all angles (360°).
  · The bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  · The element and bowl are combined into one unit, making it possible to replace the element by hand.
  · The amount of space required for maintenance has been reduced.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Distributor D101/D401/D801/D300 Series

  CKD

  Note: CAD data of this series is being revised. Please wait till the corrections are done.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  FMR Combination (Modular Type Standard) C*030/C2530 Series

  CKD

  Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Boost your system with modularization.
  · Dual element construction provides long life.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  FM Combination (Modular Type Standard) C*060 Series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Modular type WM combination standard white series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Its elasticity and flexibility allows it to be used for piping in even tight spaces.
  · TAC duct aluminum can shrink to 1/5 of its length, and TAC duct aluminum 2 can shrink to 1/10 of its length. This allows it to be stored compactly so it does not take up much storage space.
  · Can withstand bending multiple times and is resistant to heat (up to 80°C)

  CAD ：

  2D

  Days to Ship:	26 Day(s) or more

• 

  L Type Pipe Adapter, A101, A401, A801-W Series

  CKD

  Note: CAD data of this series is being revised. Please wait till the corrections are done.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Piping Adapter A100/A400/A800-W Series

  CKD

  Note: CAD data of this series is being revised. Please wait till the corrections are done.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Modular type filter and regulator standard white series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Modular type reverse filter and regulator standard white series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Series featuring built in reverse flow feature, 5μm dust removal, and 0.3μm tar removal

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Air Unit FRL Unit Modular Connection Unit BN-25T6

  NIHON SEIKI

  A modular space-saving series feature built in bracket and pressure meter.
  
  [Features]
  · Each unit is easily set with its specialized attachment.
  · Metal bottle comes standard.
  · Fluid level is displayed through color changing glass.
  · Can be connected to pressure switch.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Air Unit PL Unit Modular Connection Unit BN-25T5

  NIHON SEIKI

  [Features]
  · Each unit is easily set with its specialized attachment.
  · Metal bottle comes standard.
  · Fluid level is displayed through color changing glass.
  · Can be connected to pressure switch.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Air Unit Regulator with Filter BN-3RT5F

  NIHON SEIKI

  A modular space-saving series featuring a metal bottle.
  
  [Features]
  · Standard metal bottle.
  · Fluid level is displayed through color changing glass.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Air Unit Regulator with Filter BN-3RT0F

  NIHON SEIKI

  Lightweight and compact series featuring standard pressure meters and brackets.
  
  [Features]
  · The drain automatically empties in models BN-3RT5F, and 3RTOF when pressure drops below 0.05MPa.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Conditioning Unit Parts, GZ Series Residual Pressure Relief 3 Port Valve

  AIRTAC

  [Features]
  · Can be used in combination with the G series F.R.L (with bracket).
  · Can be used as a manual three port valve.
  · Improved visibility for manual notices (EXH/SUP).
  · OSHA compliant.

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  FRL unit 2 point set

  TRUSCO NAKAYAMA

  [Features]
  · A compact connection unit that specializes in filter regulating and lubrication.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  FRL unit 3 point set

  TRUSCO NAKAYAMA

  [Features]
  · A compact connection unit that specializes in filter regulating and lubrication.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Air Combination, Air Filter + Mist Separator + Regulator, AC20C-A to AC40C-A

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Filter Regulator With Built-In Pressure Gauge AWG20/30/40

  SMC

  AWG20/30/40 Filter Regulator With Built-In Pressure Gauge that enables installation and removal of pressure gauge cover with a single action.
  [Features]
  Pressure gauge anti-revolving mechanism.
  Panel-cut for pressure gauge not necessary.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Filter Regulator With Built-In Pressure Gauge And Back Flow Mechanism AWG20K, 30K, 40K

  SMC

  Filter regulator with built-in pressure gauge and back flow mechanism that provides improved visibility of the pressure gauge at various mounting locations.
  [Features]
  · Single-action installation and removal of the pressure gauge cover.
  Pressure gauge anti-revolving mechanism.
  Panel-cut for pressure gauge not necessary.

  CAD ：

  2D / 3D

  Days to Ship:	21 Day(s) or more

• 

  3-Port Valve for Releasing Residual Pressure With Keyhole (Double Action Type) VHS2510/3510/4510/5510

  SMC

  With this OSHA compliant Pressure Relief 3-Port Valve (Double Action) With Locking Holes, the supply and exhaust status of air flow can be checked at a glance.
  [Features]
  · The safety-measure manually operated valve can be used to prevent accidents caused by residual pressure in pneumatic lines.
  · A specification in which when residual pressure is being released, the valve handle can be locked in position to prevent accidental operation.
  · The double action type is structured so that the handle has to be pushed down before turning, helping prevent accidental operation.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Soft Start-Up Valve AV2000-A/3000-A/4000-A/5000-A Series

  SMC

  SMC soft start-up valve.
  [Features]
  · Start-up valves for a low-speed air supply which gradually raises the initial pressure in an air system and for quick exhausting by cutting off the air supply.
  · Power Consumption: 0.35 W.
  · Improved flow rate characteristics: Up to 2.3 times C [dm3/(s·bar)]: 9.2.
  · Energy saving: No air flow when switching the main valve.
  · Improved adjustment sensitivity with a low speed air supply.
  · Features a built-in silencer to save on space and for less overall work.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Air Combination, Filter Regulator + Lubricator, ACG20A, ACG30A, ACG40A

  SMC

  FRL unit with improved visibility of the pressure gauge at various mounting locations.
  [Features]
  · Single-action installation and removal of the pressure gauge cover.·
  · The mounting angle of the pressure gauge can be selected according to the piping direction.
  Pressure gauge anti-revolving mechanism.
  Panel-cut for pressure gauge not necessary.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

Loading...