Tightening Fittings（Connection Types：Screw <=> Tube Multipoint Connection）

• 

  Couplings for Tubes - Nut and Sleeve Integrated Type - Tees

  MISUMI

  [Features]·The fluids used are air and water. ·Nut and sleeve integrated tee type fitting for tubes.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	39 Day(s) or more

• 

  Corrosion Resistant SUS316 Tighten Fitting Tee

  PISCO

  All parts are made using SUS316 for excellent corrosion resistance. *The CAD data for this series is being revised. It will be available as soon as modifications are complete.

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Header Block CB

  CHIYODA

  Header block for mold actuator.
  [Features]
  ・ Compact design that can be used in narrow spaces
  ・ It can be fixed in any direction simply by tightening the lock nut
  [Applications]
  ・ Ideal for air piping for mold parts

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Chemifit CP Series, Tee【5 Pieces Per Package】

  NITTA

  · The inner surface of the tee is smooth due to injection molding. Features excellent dust-free and pollution-free characteristics. A special polypropylene resin is used as a base material.
  
  [Features]
  · Screw-in type fitting made of polypropylene resin.
  · Lightweight.
  · Completely oil-free treated product.
  · Parts are cleaned in a clean room.
  ･ Excellent inner surface smoothness.
  · Inner surface is smooth due to injection molding.
  · Features excellent dust-free and pollution-free characteristics.
  · Special polypropylene resin is used as a material.
  · Complies with Ministry of Health, Labour and Welfare Notification 201 (2006) and Ministry of Health, Labour and Welfare Notification 370 (1956)

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  SUS316 Insert Fittings KFG2 Series, Branch Tee KFG2T

  SMC

  [Features]
  · Compact, lightweight.
  · Grease-free.
  · Can be used with steam.
  · Conforms to the Food Sanitation Act of Japan.
  [Please refer to the following pages of the catalog]
  · Applicable tube outer diameter: metric p. 324, inches p. 329

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Self-Align Fittings H/DL/L/LL Series Male Branch Tee DT

  SMC

  Self-aligning pipe fittings by SMC Corporation.
  [Features]
  ・ It can be used with flexible copper pipes
  ·Non-directional metal sleeve
  ・ A sleeve that is resistant to external damage
  ・ Low pressure loss
  [Applications]
  ・ Used for branch piping from female thread section in the 90 degree direction on both sides

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Quick Seal Series Insert Type (Brass) Tee (Inch Size)

  NITTA

  A 3-point brass swivel tee (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Corrosion Resistant SUS316 Tighten Fitting Branch Tee

  PISCO

  All parts made of SUS316 for excellent corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Junron Brass Nipple Joint Tee

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 for "pneumatic pipe fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. Each R (PT) screw size has a different colored screw seal.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Junlon Brass Fitting, Service Tee

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism clamps onto the tube insert with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Junlon Stainless Steel Fitting Tee

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nut, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  Junron Stainless Steel Fitting Service Tee

  JUNKOSHA

  Usable across a broad temperature range. Wear on tubing due to over tightening of the cap nut, etc. is eliminated.
  
  [Features]
  · As the product consists of SUS316, which has good corrosion resistance properties, it can be used in a wide temperature range from low to high.
  · Designed specially for fluorine polymer/nylon resin tubes to ensure that the tube does not rupture due to excessive tightening of the cap nut, etc.
  · No abnormalities are allowed in the connected part unless the tube ruptures.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it is rust resistant.

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  Quick Seal Series Insert Type (Brass Specifications) Tee (Metric Size)

  NITTA

  Brass specification tee (millimeter size) fitting includes three components: the main body, , nuts and sleeve(s) in an integrated package. Also features excellent negative pressure performance.
  
  [Features]
  · Screw-in type.
  · Three parts included: fitting body, nuts and sleeve(s).
  · Demonstrates excellent sealing performance.
  · Fitting body and insert are integrated.
  · Also features excellent performance under negative pressure.
  · Only the connectors are sealed.
  · Does not require sealing tape.
  Compliant with JISB8381-1995 (pipe fitting for a flexible hose for pneumatic use)

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Quick Seal Series Insert Type (Brass) Service Tee (mm Size)

  NITTA

  It consists of three parts: brass fitting body of service tee (mm size), nut, and sleeve, and fitting body and insert are integrated. Also, it is excellent in negative pressure performance.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  QuickSeal Series, Insert type (Stainless Steel Specification) Service Tee (Metric Size)

  NITTA

  [Features]
  ・ It is a screw-in type.
  ・ This product is consisted of 3 parts: fitting body, nut, sleeve.
  ・ Delivers strong sealing performance.
  ・ The fitting body and insert are integrated. It also has excellent negative pressure performance.
  ・ Made of SUS304, it has excellent corrosion resistance.
  ・ JIS B 8381-1995 (pneumatic flexible pipe fittings) compliant product.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Quick Seal Series, DK Tube Dedicated Type, Tee

  NITTA

  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.
  · Fittings dedicated to DK tubes.
  · Only connectors are sealed.
  · Does not require sealing tape.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Quick Seal Series Insert Type (Brass) Service Tee (Inch Size)

  NITTA

  A 3-point brass service tee (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Chemifit, CP Series, Service Tee【5 Pieces Per Package】

  NITTA

  · The inner surface of the service tee is smooth due to injection molding. Features excellent dust-free and pollution-free characteristics. A special polypropylene resin is used as a base material.
  
  [Features]
  · Screw-in type fitting made of polypropylene resin.
  · Lightweight.
  · Completely oil-free treated product.
  · Parts are cleaned in a clean room.
  ･ Excellent inner surface smoothness.
  · Inner surface is smooth due to injection molding.
  · Features excellent dust-free and pollution-free characteristics.
  · Special polypropylene resin is used as a material.
  · Complies with Ministry of Health, Labour and Welfare Notification 201 (2006) and Ministry of Health, Labour and Welfare Notification 370 (1956)

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Insert Fittings KF Series, Branch Tee KFT

  SMC

  [Applications]·Used for branch connections at 90° angles from female threads on both sides. [Materials]·C3604+C3771.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Insert Fittings KF Series, Male Run Tee KFY

  SMC

  It can be used for branch piping in the same direction from the female thread and in 90° direction.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Quick Seal Fitting (Tees)

  TRUSCO NAKAYAMA

  Features
  • Sealed screw unit.
  • Product offers superior pressure resistance and vibration resistance properties.
  
  Application
  • For pneumatic, hydraulic, and water pressure.

  Days to Ship:	12 Day(s) or more

• 

  Quick Seal Fitting (Insertless Tees)

  TRUSCO NAKAYAMA

  Features
  • Sealed screw unit.
  • Product offers superior pressure resistance and vibration resistance properties.
  
  Application
  • For pneumatic, hydraulic, and water pressure.

  • STOCK

  Days to Ship:	Same day or more

• 

  Self-Align Fittings H/DL/L/LL Series Male Run Tee DY

  SMC

  Self-aligning type pipe fittings by SMC Corporation.
  [Features]
  · Can be used with soft copper pipes.
  · A non-directional type metal sleeve.
  · The sleeve helps protect against external damage.
  · Low pressure loss.
  [Applications]
  · Used for 90° branch connections in both directions.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

Loading...