Tightening Fittings（Page3）

• 

  Hose Fittings - Elbow

  CHIYODA

  A cap-nut elbow with high pull-out strength.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Tube Fitting Male Threaded 45 Degree Elbow Connector

  KOYO

  Uses cadmium-free brass material.

  Days to Ship:	23 Day(s) or more

• 

  Tube Fitting, Male Thread Elbow Connector

  KOYO

  Uses cadmium-free brass material.

  Days to Ship:	9 Day(s) or more

• 

  Tube Fitting Male Threaded Connector

  KOYO

  Uses cadmium-free brass material.

  Days to Ship:	21 Day(s) or more

• 

  Tube Fitting Male Threaded Branch Tee

  KOYO

  Uses cadmium-free brass material.

  Days to Ship:	23 Day(s) or more

• 

  Tube Fitting Female Threaded Connector

  KOYO

  Uses cadmium-free brass material.

  Days to Ship:	9 Day(s) or more

• 

  Tube Nut

  KOYO

  Cadmium-free brass material is used.

  Days to Ship:	33 Day(s) or more

• 

  Junron Brass Fitting, Nipple【1-20 Pieces Per Package】

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings."
  The tube insert allows for secure connection of a sleeve and a cap nut.
  With collar thread seal for each R (PT) thread size.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Junron Brass Nipple Joint Tee

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 for "pneumatic pipe fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. Each R (PT) screw size has a different colored screw seal.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Junlon Brass Fitting, Service Tee

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism clamps onto the tube insert with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Junron Brass Fitting Union Tee

  JUNKOSHA

  [Features]
  · The union tees of the metric Series conform to Japanese Industrial Standard JIS B8381 ‘Pneumatic Fittings’.
  · A mechanism where the tube insert is held and fastened by a sleeve and cap nut to create a secure connection
  · The connection will remain intact until the tube breaks.
  · Equipped with a threaded collar thread by R (PT) thread size.
  · Supports compressed air lines, water pressure, and hydraulic pressure.
  

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Junron Brass Fitting Bulkhead Female Union

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  Days to Ship:	11 Day(s) or more

• 

  Junlon Brass Fittings - Union Elbow

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 for pneumatic fittings. The mechanism clamps on to the tube insert with the sleeve and the cap nut for a reliable connection. With collar thread seal for each R (PT) thread size.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Junlon Brass Fittings - Bulkhead Union

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  Days to Ship:	11 Day(s) or more

• 

  Junlon Brass Fittings - Cap Nut with Guard Wire

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  Days to Ship:	11 Day(s) or more

• 

  Junron Brass Fitting Sleeve (Resin)

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 for pneumatic fittings. The mechanism clamps on to the tube insert with the sleeve and the cap nut for a reliable connection. With collar thread seal for each R (PT) thread size.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Junron Brass Fitting Sleeve (Brass)

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Junlon Brass Fittings - Cap Nut

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism clamps onto the tube insertwith the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Junron Brass Fitting Union

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 for pneumatic fittings. The mechanism clamps on to the tube insert with the sleeve and the cap nut for a reliable connection. With collar thread seal for each R (PT) thread size.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Junron Stainless Steel Fitting, Nipple

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
  
  [Features]
  · Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
  · Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
  · No abnormality in the connected part unless the tube is ruptured.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it resists rust.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Junron Stainless Fitting Union

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nut, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Junron Stainless Steel Fitting Union Tee

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nuts, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Junron Stainless Fitting Union Elbow

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over tightening of cap nut and the like. No abnormality in the connected part unless the tube ruptures. Does not require management of cap nut tightening torque.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Junlon Stainless Steel Fitting Tee

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nut, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Junron Stainless Steel Fitting Service Tee

  JUNKOSHA

  Usable across a broad temperature range. Wear on tubing due to over tightening of the cap nut, etc. is eliminated.
  
  [Features]
  · As the product consists of SUS316, which has good corrosion resistance properties, it can be used in a wide temperature range from low to high.
  · Designed specially for fluorine polymer/nylon resin tubes to ensure that the tube does not rupture due to excessive tightening of the cap nut, etc.
  · No abnormalities are allowed in the connected part unless the tube ruptures.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it is rust resistant.

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Junlon Stainless Steel Fitting Female Nipple

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of an over tightening of cap nut, etc. No abnormality in the connected part unless the tube is ruptured. Does not require management of cap nut tightening torque.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Junlon Stainless Fittings Bulkhead Female Union

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of an over tightening of cap nut, etc. No abnormality in the connected part unless the tube is ruptured. Does not require management of cap nut tightening torque.

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Junron Stainless Steel Fitting Bulkhead Union

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
  
  [Features]
  · Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
  · Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
  · No abnormality in the connected part unless the tube is ruptured.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it resists rust.

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Junlon Stainless Fitting Positionable Elbow

  JUNKOSHA

  Usable across a broad temperature range. Free of tubing wear due to over-tightening of cap nuts or the like. Connected parts will not break unless the tube ruptures. Does not require regular cap nut torque tightening.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Junron Stainless Fitting US2 Series Elbow for Flexible Tubes

  JUNKOSHA

  Stainless steel fittings for flexible tubing. To resolve snaking during piping, we use cap nuts built into the sleeve that use a mechanism unique to our company. Does not require management of cap nut tightening torque.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Junlon Stainless Steel Fittings - US2 Series Union for Flexible Tube

  JUNKOSHA

  Stainless steel fittings for flexible tubing. To resolve tube twisting during piping, cap nuts built into the sleeve that use the unique Junkosha mechanism are employed. The cap nut tightening torque does not require management.

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Junron Stainless Fitting US2 Series Union Tee for Flexible Tubes

  JUNKOSHA

  Stainless steel fittings for flexible tubing. To resolve tube twisting during piping, we use cap nuts built into the sleeve that use a unique Junkosha mechanism. Does not require management of cap nut tightening torque.

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Junlon Stainless Steel Fittings - US2 Series Union Elbow for Flexible Tube

  JUNKOSHA

  Stainless steel fittings for flexible tubing. To resolve tube twisting during piping, we use cap nuts built into the sleeve that use a proprietary Junkosha mechanism. Does not require management of cap nut tightening torque.

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Quick Seal Series Insert Type (Brass Specifications) Tee (Metric Size)

  NITTA

  Brass specification tee (millimeter size) fitting includes three components: the main body, , nuts and sleeve(s) in an integrated package. Also features excellent negative pressure performance.
  
  [Features]
  · Screw-in type.
  · Three parts included: fitting body, nuts and sleeve(s).
  · Demonstrates excellent sealing performance.
  · Fitting body and insert are integrated.
  · Also features excellent performance under negative pressure.
  · Only the connectors are sealed.
  · Does not require sealing tape.
  Compliant with JISB8381-1995 (pipe fitting for a flexible hose for pneumatic use)

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Quick Seal Series Insert Type (Brass) Service Tee (mm Size)【1-10 Pieces Per Package】

  NITTA

  It consists of three parts: brass fitting body of service tee (mm size), nut, and sleeve, and fitting body and insert are integrated. Also, it is excellent in negative pressure performance.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Quick Seal Series Insert Type (Brass Specifications) Female Connector (Metric Size)

  NITTA

  A brass female connector (millimeter sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Quick Seal Series, Insert Type (Brass Specifications), Union Connector (mm Size)

  NITTA

  The fitting main and insert are integrated at three points; the sleeve, nut, and fitting part of the brass type union connector (mm size). Also offers excellent negative pressure performance.
  
  [Features]
  · The tube is connected by Push One®.
  · No need for jigs nor tools to connect the tube.
  · Electroless nickel plated.
  · There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
  · Flame retardant resin (equivalent to UL94 V-0 standards) is used.
  · Incombustible PBT resin is used for the materials.
  · Equivalent to UL94 V-0 standards, and has excellent self-extinguishing properties.
  · Able to be used in environments prone to spatter.
  · The R screws are sealed, and thus there is no need to wrap them with sealing tape.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  QuickSeal Series Insertion Type (Brass Specifications) 90° Union Elbow (Metric Size)

  NITTA

  The fitting main body and insert are integral at three points: sleeve, nut, and fitting main body of the 90° union (mm size) with brass specifications. Excellent negative pressure performance.
  
  [Features]
  · The tube is connected by PushOne®.
  · No need for jigs nor tools to connect the tube.
  · Electroless nickel plated.
  · There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
  · Flame-retardant resin (equivalent to UL94 V-0 standard) adopted.
  · Non-combustible PBT resin is used for the materials.
  · Equivalent to UL94 V-0 standard, with superior self-extinguishing properties.
  · Can be used in environments in which sputtering occurs.
  · The R screws are sealed, and thus there is no need to wrap them with sealing tape.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Quick Seal Series Insert Type (Brass Specifications) Union Tee (Metric Size)

  NITTA

  It consists of three parts: brass fitting body of union tee (mm size), nut, and sleeve, and fitting body and insert are integrated. Also, it is excellent in negative pressure performance.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Quick Seal Series Insert Type (with Brass Specifications) Swivel Nut Female Connector (mm Size)

  NITTA

  Brass specifications swivel nut female connector with fitting body (mm size), nut, and sleeve.
  
  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.
  · Demonstrates excellent sealing performance.
  · Fitting body and insert are integrated.
  · Also has excellent performance with negative pressure.
  · Only connectors are sealed.
  · Does not require sealing tape.
  JISB8381-1995 (flexible hose pipe fittings for pneumatic use) compliant product.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Quick Seal Series Insert Type (Brass Specifications) Panel Touch Connector (mm Size)

  NITTA

  Three-item system made up of brass specification panel touch connector (mm size) fitting unit, nuts and sleeves, and integrated fitting unit and insert. Excellent negative pressure performance.
  
  [Features]
  · The tube is connected by PushOne®.
  · No need for jigs nor tools to connect the tube.
  · Electroless nickel plated.
  · There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
  · Flame-retardant resin (equivalent to UL94 V-0 standard) adopted.
  · Non-combustible PBT resin is used for the materials.
  · Equivalent to UL94 V-0 standard, with superior self-extinguishing properties.
  · Can be used in environments in which sputtering occurs.
  · The R screws are sealed, and thus there is no need to wrap them with sealing tape.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Quick Seal Series Yellow Brass Sleeve

  NITTA

  - Composed of three components: the brass sleeve's fitting unit, nut, and sleeve. The fitting unit and insert are integrated. Also shows excellent performance at negative pressures.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Quick Seal Series Insert Type (Brass Specifications) Connector (NPT Thread) (Inch Size)

  NITTA

  A 3-point connector (NPT thread) (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  CAD ：

  2D

  Days to Ship:	55 Day(s) or more

• 

  Quick Seal Series Insert Type (Stainless Steel Specification) Connector (Metric Size)

  NITTA

  A 3-point stainless steel specification connector (mm sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Also demonstrates excellent performance at negative pressures.
  
  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.
  · Demonstrate excellent sealing performance.
  · Fitting body and insert are integrated.
  · Also has excellent performance with negative pressure.
  · Made of SUS304 for excellent corrosion resistance.
  · Complies with JIS B 8381-1995 (connector for flexible pneumatic hose).

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Quick Seal Series Insert Type (Stainless Steel Type) 90° Elbow (Metric Size)

  NITTA

  A 3-point stainless steel 90° elbow (millimeter sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  CAD ：

  2D

  Days to Ship:	Same day or more

Loading...