Screw Fittings, Screw-In Type Flanges（Nominal of Thread M1：6B(150A)）

• 

  Steel Pipe, Screw-in Pipe Fitting, Nipple

  NAGOYA

  NAGOYA, screw-in fitting / threaded type flange, steel pipe screw-in pipe fitting, nipple.

  Days to Ship:	11 Day(s) or more

• 

  Pipe Fitting, Nipple

  HITACHI KINZOKU

  JIS B 2301. Hot dip galvanizing is an excellent plating with a low environmental load.
  
  [Features]
  · Environmentally friendly: Lead and cadmium are greatly reduced.
  · Uses high purity zinc metal to reduce lead (Pb) and cadmium (Cd) content significantly.
  · Excellent manufacturing method: New heavy metal addition is not required.
  · Development of original manufacturing facilities and preprocessing methods has established the technology for mass production, and heavy metals such as bismuth (Bi) are used instead of lead.
  · Excellent performance: Appearance and performance equivalent to conventional plated parts.
  · Satisfies the specifications stipulated in JIS B 2301 (Screw type malleable cast iron pipe fittings), and has a glossy plating on the outside similar to that of conventional products.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting, Reducing Elbow

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for steel pipes with small to medium diameters; JIS B 2301 specifies it as "screwed type malleable cast iron pipe fitting". Hot zinc plating reduces environmental burden.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting T

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Steel Pipe Fitting, Threaded Pipe Fitting, Socket

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	20 Day(s) or more

• 

  Pipe Fitting Elbow

  HITACHI KINZOKU

  A JIS B 2301 screw-in type malleable cast iron fitting. Hot-dip zinc plating is excellent for reducing the environmental burden.
  
  [Features]
  · A standard ‘Screwed Type Malleable Cast Iron Pipe Fitting’ as specified by JIS B 2301. We also manufacture some non-JIS standard products.
  · The main material is Mareburu® (blackheart malleable cast iron). The threaded section has a tapered pipe thread. Hot-dip galvanized surface treatment is applied where the surface is processed.
  · Hot-dip galvanization has been changed to a superior plating that reduces the environmental burden (RoSH compliant).
  · Environmentally friendly: Lead and cadmium are significantly reduced.
  · We use high-purity zinc metal that largely reduces the inclusion content of lead (Pb) and cadmium (Cd).
  · Superior manufacturing method: No addition of new heavy metals is required.
  · Mass production technology has been established by developing a unique production facility and preprocessing method. Heavy metals including bismuth (Bi) are used to replace of lead.
  · Excellent performance: The appearance and performance is equivalent to conventional plated parts.
  · Conforms to the specifications that are specified in JIS B 2301 (Screwed Type Malleable Cast Iron Pipe Fittings). The fitting has an exterior glossy plated finish—similar to the conventional products.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Steel Pipe Fitting, Screw-in Type Pipe Joint, Bushing

  RIKEN

  Material: Black malleable cast iron (FCMB27-05)
  · Applicable fluids: Water, air, steam, gas, oil.
  · Surface treatment: Raw casting, dissolved zinc plating, epoxy resin coating.

  Days to Ship:	15 Day(s) or more

• 

  Steel Pipe, Screw-in Pipe Fitting, Steel Socket (Standard Product)

  NAGOYA

  NAGOYA, screw-in fitting / threaded type flange, steel pipe screw-in pipe fitting, steel socket. (Standard Product)

  Days to Ship:	11 Day(s) or more

• 

  Pipe Fitting 45° Elbow

  HITACHI KINZOKU

  A plumbing fitting that uses screw connection for steel pipes with small to medium diameter; JIS B 2301 specifies it as "screwed type malleable cast iron pipe fitting". Hot zinc plating reduces environmental burden.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting, Reducing Tess

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting, Cap (With Clamp)

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Steel Pipe Fitting, Screw-in Type Pipe Fitting, Nipple

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	16 Day(s) or more

• 

  Screw-In Malleable Cast Iron Pipe Fitting, Socket

  JFEPIPEFITTING

  [Features]
  ・ RING Brand fittings are products produced with state-of-the-art equipment and thorough quality control
  ・ The RING Brand PL fitting has a powder epoxy resin coated on its inner and outer surfaces by a special coating method, excluding the threaded section, and has excellent adhesion, corrosion resistance, etc.
  ・ Both products are safe to use

  Days to Ship:	12 Day(s) or more

• 

  Screw-In Malleable Cast Iron Pipe Fitting, Nipple

  JFEPIPEFITTING

  [Features]
  • JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
  • Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
  • Can be used with a high level of reliability.

  Days to Ship:	12 Day(s) or more

• 

  Pipe Fitting Socket

  HITACHI KINZOKU

  JIS B 2301 screw-in type malleable cast iron fitting
  
  [Features]
  · Environmentally friendly: Lead and cadmium are greatly reduced.
  · Uses high purity zinc metal to reduce lead (Pb) and cadmium (Cd) content significantly.
  · Excellent manufacturing method: New heavy metal addition is not required.
  · Development of original manufacturing facilities and preprocessing methods has established the technology for mass production, and heavy metals such as bismuth (Bi) are used instead of lead.
  · Excellent performance: Appearance and performance equivalent to conventional plated parts.
  · Satisfies the specifications stipulated in JIS B 2301 (Screw type malleable cast iron pipe fittings), and has a glossy plating on the outside similar to that of conventional products.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting, Union

  HITACHI KINZOKU

  A small to medium diameter steel pipe fitting that uses screw connection; JIS B 2301 specifies it as "screw-in type malleable cast iron pipe fitting". Hot dip galvanizing reduces impact on the environment.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting Plug

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting, Bushing

  HITACHI KINZOKU

  A tube fitting bushing—manufactured by Hitachi Metals Ltd., with a track record in Japan for top-class quality screw fittings/pipe components.
  -Working fluid: water, air, steam, gas, oil
  -Surface treatment: as-cast, galvanized

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Pipe Fittings Assembly Flange

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Pipe End Anti-Corrosion Pipe Fittings Elbow

  HITACHI KINZOKU

  The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Corrosion Resistant Pipe End Fitting T

  HITACHI KINZOKU

  By integral molded polyolefin resin visceral core, hide the iron land exposed portion of the tube end of the screw back and lining steel pipes from the fluid, and provide an excellent anti-corrosion effect. It is easy to construct management because it is integrally molded.

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  Pipe End Corrosion Prevention Fitting Socket

  HITACHI KINZOKU

  The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Corrosion-Free Pipe End Fittings - Plug

  HITACHI KINZOKU

  The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  Pipe End Anti Corrosive Pipe Joint, 5K Flange

  HITACHI KINZOKU

  The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Pipe End Anti Corrosive Pipe Joint, 10K Flange

  HITACHI KINZOKU

  The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Pipe End Anti-Corrosion Fitting, Nipple

  HITACHI KINZOKU

  An integrally molded polyolefin resin internal core shields the screwhead or the exposed iron-earth section of the end of the steel pipe lining from fluid and provides an excellent anti-corrosive effect. It is easy to manage thanks to its integral molding.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Ductile Screw-in Type Flange

  HITACHI KINZOKU

  [Product Specifications]Connection type: Flange, Connection shape: Flange, Material: Ductile cast iron, Fluid used: Water/Air/Steam/Gas/Oil

  Days to Ship:	16 Day(s) or more

• 

  Fitting Sockets White/Black

  YODOSHI

  A black/white fitting socket that can be used with water, oil, steam, air or gas pipes made of black heart malleable cast iron.
  
  [Features]
  · Applicable Fluids: Water, Oil, Vapor, Air, Gas

  Days to Ship:	17 Day(s) or more

• 

  White and Black Fitting Plug

  YODOSHI

  A white/black plug fitting—manufactured by Yodoshi Corporation, with a track record in Japan for top-class quality screw fittings/pipe components.
  · Material: FCMB270
  · Working fluid: water, air, steam, chemicals, oil
  · Surface treatment: galvanized

  Days to Ship:	17 Day(s) or more

• 

  Black or white Fitting Reducing Socket

  YODOSHI

  Black or white fitting reducing socket that can be used with pipes made of black heart malleable cast iron for water, oil, steam, air or gas.

  Days to Ship:	17 Day(s) or more

• 

  45° Elbow Fittings, White Product, ZD Type

  RIKEN

  Maximum operating pressure: 2.5 MPa (static water: ≤ 120°C), 1.0 MPa (vapor, air, gas, and oil: ≤ 300°C).

  Days to Ship:	20 Day(s) or more

• 

  ZD Fittings, White Parts, Elbow

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	20 Day(s) or more

• 

  ZD Fitting Item Tees

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C or below), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).
  
  [Features]
  · For the ZD fitting, the screw portion of the screw-on malleable cast iron pipe fitting has been coated with a fluorine polymer resin (as a sealant) and heat cured.
  · There are two types: White type and Komacoat type (see screw type malleable cast iron fitting).
  · Application of sealant and winding of sealing tapes that can be troublesome in jointing work are not required and the piping man-hours can be reduced.
  · They provide stable sealing performance.
  · Prevents rusting of screws that are stored for long periods.
  ・※Koma coated items are produced to order.

  Days to Ship:	14 Day(s) or more

• 

  ZD Fitting, White, Reducing Socket

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C or below), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	20 Day(s) or more

• 

  ZD Fitting, White Type, Reducing Tees

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at 120°C or below), 1.0 MPa (steam, air, gas, and oil at 300°C or below)
  
  [Features]
  · For the ZD fitting, the screw portion of the screw-on malleable cast iron pipe fitting has been coated with a fluorine polymer resin (as a sealant) and heat-cured.
  · Two types are available: a white type and a Komacoat type (see screw-type malleable cast iron fitting).
  · Application of sealant and winding of sealant tape are not required reducing the number of man-hours required to run pipes.
  · Provides stable sealing performance.
  · Prevents rusting on threads included on parts that are stored for an extended period of time.
  · *Komacoat types are made to order.

  Days to Ship:	20 Day(s) or more

• 

  Pipe-End Anticorrosion Fitting, RCF-K-Type, Standard Product, Elbow

  RIKEN

  Anticorrosion fitting for tube ends. Malleable iron fitting with an incorporated resin core.

  Days to Ship:	20 Day(s) or more

• 

  Pipe-End Anticorrosion Fitting, RCF-K-Type, Standard Product, Socket

  RIKEN

  Corrosion-proof core built-in type fitting for tube ends with malleable cast iron fitting with an incorporated resin core

  Days to Ship:	20 Day(s) or more

• 

  Pipe-End Anticorrosion Fitting, RCF-K Type, Standard Product Tee

  RIKEN

  Corrosion-proof core built-in type fitting for tube ends with malleable cast iron fitting with an incorporated resin core

  Days to Ship:	20 Day(s) or more

• 

  Pipe-End Anticorrosion Fitting, RCF-K Type, Standard Product, Nipple

  RIKEN

  [Features]
  • Screw-in with pipe end anti-corrosive fitting.
  • Anticorrosion fitting for tube ends. Malleable iron fitting with an incorporated resin core.
  • A core with double lip and O-ring packing is used for controlling water outlets and inlets to the pipe end, thereby giving excellent resistance to rust water due to aging.
  • The combination of RCF-KZ and fittings for heterogeneous pipes prevents electric corrosion due to contact between dissimilar metals.
  • From newly-installed pipes to repaired and corrected pipes, all piping scenes are supported by screw-in pipe end corrosion-proof fittings and pipe end corrosion-proof LA fittings.
  • Ready compatibility to various constructions.
  • Non-PVC material is used in the resin of pipe-end anti-corrosive fittings.
  • Lead-free material is also used in copper alloys.
  • Our eco-friendly product can be safely used in the piping of drinking water.
  • Get the perfect pipes, which are easy on the environment and have excellent earthquake resistance, just by machining a rolled thread to the polyethylene powder lining steel pipe used for water supply.

  Days to Ship:	20 Day(s) or more

• 

  Steel Pipe Fittings, Screw-In Pipe Fitting, 45° Elbow

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C or below), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	20 Day(s) or more

• 

  Steel Pipe Fitting, Screw-in Type Pipe Fitting, Elbow

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C or below), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	20 Day(s) or more

• 

  Steel Pipe Fittings, Screw-In, Pipe Fitting, Cap

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	20 Day(s) or more

• 

  Steel Pipe Fitting, Screw-in Pipe Fitting, Tee

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C or below), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	20 Day(s) or more

• 

  Steel Pipe Fitting, Screw-in Type Pipe Fitting, Plug

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	16 Day(s) or more

• 

  Fitting for Steel Pipes, Screw-in Type Pipe Fitting, Reducing Socket

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	20 Day(s) or more

Loading...