Screw Fittings, Screw-In Type Flanges（Nominal of Thread 3(Different Diameters or Different Type Screw)：3/4B(20A)）

• 

  Screw-in Tee

  YAMATOTOKUSYUKO

  Our joints for high-pressure piping are used in hydraulic-related industries, steel plants, etc.
  [Features]
  ·A threaded tee made of carbon steel and stainless steel.

  Days to Ship:	9 Day(s) or more

• 

  Stainless Steel Screw-in Fitting, Reducing Tee

  KITZ

  [Product Specifications]Material: SCS13A, Surface treatment: None, Fluid used: Water/Air/Steam/Gas/Oil

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  Pipe Fittings, Cross (With Clamp)

  HITACHI KINZOKU

  A plumbing fitting that uses screw connection for steel pipes with a small to medium diameter; JIS B 2301 describes it as a "screw-type, malleable, cast iron pipe fitting." Hot zinc plating reduces the environmental impact.

  CAD ：

  2D

  Days to Ship:	17 Day(s) or more

• 

  HB Fitting T

  HITACHI KINZOKU

  [Features]
  ▪ Use the HB fitting in piping such as connected water supply piping and Inert gas (carbon dioxide) fire-extinguishing equipment piping that use Schedule 40, 80 of the carbon steel pipe for JIS G 3454 pressure piping.

  Days to Ship:	16 Day(s) or more

• 

  Stainless Steel Threaded Pipe Fitting Reducing Tee

  YODOSHI

  A stainless steel, threaded, different-diameter, cheese joint pipe fitting—manufactured by Yodoshi Corporation, with a track record in Japan for top-class quality screw fittings/pipe components.
  · Material: stainless steel
  · Working fluid: water, air, steam, chemicals, oil

  Days to Ship:	14 Day(s) or more

• 

  Pipe Fittings - Three-way Reducing T

  HITACHI KINZOKU

  A small to medium diameter steel pipe fitting that uses screw connection; JIS B 2301 specifies it as "screw-in type malleable cast iron pipe fitting". Hot dip galvanizing reduces impact on the environment.

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  Pipe Fitting, Reducing Tess

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  Fitting for Steel Pipes, Screw-in Type Pipe Fitting, Reducing Tee

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	15 Day(s) or more

• 

  Pipe Fitting - Female/Male T

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Corrosion Resistant Pipe End Fitting T

  HITACHI KINZOKU

  By integral molded polyolefin resin visceral core, hide the iron land exposed portion of the tube end of the screw back and lining steel pipes from the fluid, and provide an excellent anti-corrosion effect. It is easy to construct management because it is integrally molded.

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  PQWK Fitting for Bracket Connection, Malleable, A-Shaped T (Includes Deep Plastic Screw)

  HITACHI KINZOKU

  The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting With Sealant, WS Fitting, Reducing Cross

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. No need to wrap sealing tape around the threaded section of connecting pipes for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, reducing piping work.

  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting with Sealing Agent WS Fitting Three-Sided Diameter Differential T

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. No need to wrap sealing tape around the threaded section of connecting pipes for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, reducing piping work.

  Days to Ship:	15 Day(s) or more

• 

  Pipe Fitting with Sealant, WS Fitting, Variable Diameter T

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. No need to wrap sealing tape around the threaded section of connecting pipes for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, reducing piping work.

  Days to Ship:	15 Day(s) or more

• 

  Stainless Steel Product, Reducing Tees, SFRT and SMRT

  ONDASEISAKUSYO

  A variety of JIS standard fittings and tubing parts are available. Stainless Steel Reducing Tees SFRT, SMRT Types from Onda MFG, a company with a proven record in Japan.
  • Materials: stainless steel, carbon steel
  • Applicable fluids: hot and cold water, air, steam, gas (other than combustible or toxic types), oil.

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  ZD Fitting, White Type, Reducing Tees

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at 120°C or below), 1.0 MPa (steam, air, gas, and oil at 300°C or below)
  
  [Features]
  · For the ZD fitting, the screw portion of the screw-on malleable cast iron pipe fitting has been coated with a fluorine polymer resin (as a sealant) and heat-cured.
  · Two types are available: a white type and a Komacoat type (see screw-type malleable cast iron fitting).
  · Application of sealant and winding of sealant tape are not required reducing the number of man-hours required to run pipes.
  · Provides stable sealing performance.
  · Prevents rusting on threads included on parts that are stored for an extended period of time.
  · *Komacoat types are made to order.

  Days to Ship:	16 Day(s) or more

• 

  ZD Fitting, White, 3-Way Reducing Tees

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C or below), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	16 Day(s) or more

• 

  ZD Fittings, White Goods, Four-Way Reducing Cross

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	20 Day(s) or more

• 

  Steel Pipe Fitting, Threaded Pipe Fitting, 4-Way Reducing Cross

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	20 Day(s) or more

• 

  Stainless Steel Screw-In Pipe Fittings, Reducing Tee [TR]

  MIETECHNO

  [Features]
  ・ As It is made of stainless steel, it has excellent corrosion resistance and beautiful external appearance, and is sanitary. No need to worry about rust bumps, no need for painting or plating
  ・ Cast products are made of high strength stainless steel SCS13A, manufactured by lost wax precision casting, and subjected to heat treatment to pickling. As a result, the structure is fine and stable, and it has high strength and can be used with confidence. Also, the surface skin is fine and beautiful, and the dimensional accuracy is sufficient.

  Days to Ship:	16 Day(s) or more

• 

  Auxiliary Material for Piping, Fitting, and Plumbing, Fitting for Water Supply Piping, Gunmetal Tees

  MIYAKO

  Miyako's water supply piping fittings for general water supply to industrial use, gunmetal tee.

  Days to Ship:	18 Day(s) or more

• 

  Auxiliary Material for Piping, Fitting, and Plumbing, Fitting for Water Supply Piping, Gunmetal Internal/External Threaded Tee

  MIYAKO

  [Features]Suitable for installing, etc., a water hammer reducer. [Product Specifications]Material: Bronze

  Days to Ship:	12 Day(s) or more

• 

  Auxiliary Material for Piping, Fitting, and Plumbing, Fitting for Water Supply Piping, Plated Fittings - Tees

  MIYAKO

  A selection of auxiliary materials for piping, fittings, and plumbing manufactured by Miyako, Inc. Purposes range from public water supply to industrial use - Fittings for water supply plumbing - Plated fittings - Tee.
  · Material: Brass
  · Applicable fluids: Water.
  · Surface treatment: Chrome plating.

  Days to Ship:	12 Day(s) or more

• 

  Stainless Steel Screw-in Fitting, Service Tee, A STA

  ON INDUSTRIES

  It is a stainless steel screw-in fitting, service tee A STA, made by O.N. Industries.

  Days to Ship:	14 Day(s) or more

• 

  Stainless Steel Screw-in Fitting, Service Tee B STB

  ON INDUSTRIES

  It is a stainless steel screw-in fitting, service tee B STB, made by O.N. Industries.

  Days to Ship:	16 Day(s) or more

• 

  Stainless Steel Screw-in Pipe Fitting, Reducing Tee, RT

  ON INDUSTRIES

  It is a stainless steel screw-in fitting, reducing tee RT, made by O.N. Industries.

  Days to Ship:	16 Day(s) or more

• 

  ESLON, Eslo-Coat LX Fitting Reducing Tees (RT)

  SEKISUI CHEMICAL

  The core is adhered to the inner side of the lining steel pipe, effectively blocking permeation of the water onto the metal surface, and corrosion of the tube end portion, the fitting body and the like are prevented.
  
  [Features]
  · ESLON Eslo-Coat LX joint is an anti-corrosion joint with a built-in core where the "core" tightly adheres to the inner surface of the lined steel pipe, and effectively prevents water from entering into the metal surface of the joint.
  · Fitting interior is all coated with resin.
  · The core prevents pipe-end corrosion and is integrated with the protective layer to significantly improve resistance to corrosion.
  · Integrated core suitable for pipe juncture and pipe end anticorrosion.
  ▪ Uses hard vinyl chloride or denatured polyphenylene ether, which are confirmed to be hygienic and can therefore be used for supplying water.

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  Pre-Seal E-white Fitting Three-way Reducer Tee

  CK KINZOKU

  [Features]·Easy installation with pre seal white fitting. / Reduced torque for large-diameter screw-in. / Constant installation quality

  Days to Ship:	11 Day(s) or more

• 

  Pre-Seal e white Fitting Reducer Tee

  CK KINZOKU

  [Features]·Easy installation with pre seal white fitting. / Reduced torque for large-diameter screw-in. / Constant installation quality

  Days to Ship:	11 Day(s) or more

• 

  Pre-Seal e white Fitting Square Reducer Cross

  CK KINZOKU

  [Features]
  ·Eliminates the need to apply sealant.
  ·Lighter screwing torque.
  ·Not only machined screws, but also rolled screw pipes with excellent earthquake resistance are available.
  ·It is an environmentally friendly material.
  [Applications]
  ·Ideal for rolling screws.

  Days to Ship:	11 Day(s) or more

• 

  Pre-Sealed Core Fitting, Normal Type, for Connection of Lining Steel Pipes, Tees with Different Diameters

  CK KINZOKU

  [Features]·Easy installation with pre seal core fitting. / Reduces torque for large-diameter screw-in. / No more leakage of seal material into pipes. / Constant installation quality

  Days to Ship:	11 Day(s) or more

• 

  Pre-Sealed Core Fitting, Normal Type, for Connection of Lining Steel Pipes, Socket with Different Diameters

  CK KINZOKU

  [Features]·Easy installation with pre seal core fitting. / Reduces torque for large-diameter screw-in. / No more leakage of seal material into pipes. / Constant installation quality

  Days to Ship:	11 Day(s) or more

• 

  Preseal Core Joint, Insulation Type, for Device Connection (Fitting for Prevention of Contact Between Dissimilar Metals), Z Series, Faucet Z, Faucet Tee

  CK KINZOKU

  [Features]
  ·Strong against earthquakes due to the use of rolled screws.
  ·Eliminates the need to apply sealant.
  ·Light screwing torque.
  ·It is an environmentally friendly material.
  ·The screws do not rust.

  Days to Ship:	11 Day(s) or more

• 

  Preseal Core Joint, Insulation Type, for Device Connection (Fitting for Prevention of Contact Between Dissimilar Metals), ZF Series, Male Adapter, Reducing Tee

  CK KINZOKU

  [Features]·Easy installation with pre seal core fitting. / Reduces torque for large-diameter screw-in. / No more leakage of seal material into pipes. / Constant installation quality

  Days to Ship:	11 Day(s) or more

• 

  Pre-Seal Core Transparent PC Core Fitting Normal Type TPC Series Reducer Tee for Connection of Lining Steel Pipes

  CK KINZOKU

  [Features]With pre seal transparent PC core fitting, defects during installation can be visually checked. Furthermore, installation completion can be seen at a glance

  Days to Ship:	11 Day(s) or more

• 

  Core Fittings - for Lining Steel Pipe Connection - Tee with Different Diameters

  CK KINZOKU

  Threaded fittings for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
  [Features]
  ·No PVC is used in the core joints. Easy to recycle.
  ·Excellent anti-corrosion performance due to the double structure of lip and O-ring.
  ·Also supports rolled screws.
  · Made in Japan.
  [Applications]
  ·For branch size conversion of lining piping.

  Days to Ship:	11 Day(s) or more

• 

  Core Fittings - for Fixture Connection - Fitting for Prevention of Contact Between Dissimilar Metals - Water Faucet Tee

  CK KINZOKU

  Threaded fittings for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
  [Features]
  ·No PVC is used in the core joints. Easy to recycle.
  ·Excellent anti-corrosion performance due to the double structure of lip and O-ring.
  ·Also supports rolled screws.
  · Made in Japan.
  [Applications]
  ·For equipment connections of lining pipes.

  Days to Ship:	11 Day(s) or more

• 

  PC Core Fittings, for Lined Steel Pipe Connection, Unequal Diameter Tee

  CK KINZOKU

  Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
  Pipe end anti-corrosion joints for inner and outer surface lining steel pipes with excellent anti-corrosion performance by coating the outer surface of the core joint with a thick polyamide resin or the like.
  [Features]
  ·It has excellent anti-corrosion performance.
  ·The socket sleeve is made long and completely wraps around the tube sheath.
  ·The gap between the pipe and joint is sealed with a special rubber ring or caulking tape to prevent water from entering and to provide electrical insulation.
  ·It has excellent corrosion resistance and weather resistance.
  ·There is no need to worry about corrosion even when buried in salty soil, soil or concrete where local batteries are likely to occur, or where there is a lot of stray current.
  ·Increase efficiency of piping construction.
  ·By using rubber rings, there is no need to wrap anti-corrosion tape around the body of the joint and where it connects to the pipe, which speeds up the installation of pipes.
  [Applications]
  ·For branch size conversion of buried lining piping.

  Days to Ship:	11 Day(s) or more

• 

  Transparent PC Core Fittings (TPC) - for Lining Steel Pipe Connection - Reducing Tee

  CK KINZOKU

  Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
  [Features]
  ·Attachment of the rubber ring can be easily confirmed.
  ·Correct construction is possible by managing extra screws.
  ·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
  · Made in Japan.
  ·GOOD DESIGN award winning product.
  [Applications]
  ·For changing the size of the branches of buried lining pipes.

  Days to Ship:	11 Day(s) or more

• 

  CK Fittings - Screw-in Type Malleable Cast Iron Pipe Fitting - Unequal Diameter (Small Diameter Branches) Tee with Band

  CK KINZOKU

  JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct threaded fittings.
  [Features]
  · Made in Japan.
  [Applications]
  ·Ideal for branching white piping.

  Days to Ship:	11 Day(s) or more

• 

  CK Fittings - Screw-in Type Malleable Cast Iron Pipe Fitting - Unequal Diameter Cross

  CK KINZOKU

  JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct fittings.
  [Features]
  · Made in Japan.
  [Applications]
  ·Ideal for branching with different diameters in four directions of white wiring.

  Days to Ship:	11 Day(s) or more

• 

  Screw-In PL Fitting, Reducing Tee with Collar (Small Branch Diameter)

  JFEPIPEFITTING

  [Features]
  • JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
  • Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
  • Can be used with a high level of reliability.

  Days to Ship:	16 Day(s) or more

• 

  Screw-In PL Fitting, Reducing Tee (Small Branch Diameter)

  JFEPIPEFITTING

  [Features]
  • JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
  • Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
  • Can be used with a high level of reliability.

  Days to Ship:	16 Day(s) or more

• 

  Screw-In Malleable Cast Iron Pipe Fitting, Reducing Tee with Collar (Small Branch Diameter)

  JFEPIPEFITTING

  [Features]
  • JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
  • Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
  • Can be used with a high level of reliability.

  Days to Ship:	18 Day(s) or more

• 

  Pipe-End Anticorrosion Fitting for Water Supply Dual-Use Type, Core Fitting, CD Core, Reducing Tee

  JFEPIPEFITTING

  [Features]
  • Mechanism for preventing rust water support for soft installations, regardless of pipe type.
  • JFE dual purpose core fitting.
  • Compatible with two-pipe types.
  • Excellent corrosion-proof performance. A double layer structure including a lip and ring provides superior installability.
  • Wide product assortment.
  • Flanges produced by the manufacturer can be securely used for butterfly valves.
  • Compatible with rolling threading.

  Days to Ship:	18 Day(s) or more

Loading...