Screw Fittings, Screw-In Type Flanges（Nominal of Thread M2：3B(80A)）

• 

  Stainless Steel Screw-in Fitting, Reduced Bushing

  KITZ

  KITZ, Screw-in Fitting / Screw-in Flange, Stainless Steel Reducing Screw-in Bushing

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  Pipe Fitting, Reducing Elbow

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for steel pipes with small to medium diameters; JIS B 2301 specifies it as "screwed type malleable cast iron pipe fitting". Hot zinc plating reduces environmental burden.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting, Bushing

  HITACHI KINZOKU

  A tube fitting bushing—manufactured by Hitachi Metals Ltd., with a track record in Japan for top-class quality screw fittings/pipe components.
  -Working fluid: water, air, steam, gas, oil
  -Surface treatment: as-cast, galvanized

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  ZD Fitting - White Bushing

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C or below), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	20 Day(s) or more

• 

  Steel Pipe Fitting, Screw-in Type Pipe Joint, Bushing

  RIKEN

  Material: Black malleable cast iron (FCMB27-05)
  · Applicable fluids: Water, air, steam, gas, oil.
  · Surface treatment: Raw casting, dissolved zinc plating, epoxy resin coating.

  Days to Ship:	15 Day(s) or more

• 

  Pipe Fitting, Nipple

  HITACHI KINZOKU

  JIS B 2301. Hot dip galvanizing is an excellent plating with a low environmental load.
  
  [Features]
  · Environmentally friendly: Lead and cadmium are greatly reduced.
  · Uses high purity zinc metal to reduce lead (Pb) and cadmium (Cd) content significantly.
  · Excellent manufacturing method: New heavy metal addition is not required.
  · Development of original manufacturing facilities and preprocessing methods has established the technology for mass production, and heavy metals such as bismuth (Bi) are used instead of lead.
  · Excellent performance: Appearance and performance equivalent to conventional plated parts.
  · Satisfies the specifications stipulated in JIS B 2301 (Screw type malleable cast iron pipe fittings), and has a glossy plating on the outside similar to that of conventional products.

  CAD ：

  2D

  Days to Ship:	17 Day(s) or more

• 

  Pipe Fittings - Three-way Reducing T

  HITACHI KINZOKU

  A small to medium diameter steel pipe fitting that uses screw connection; JIS B 2301 specifies it as "screw-in type malleable cast iron pipe fitting". Hot dip galvanizing reduces impact on the environment.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting, Reducing Tess

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  PC Core Fittings, for Lined Steel Pipe Connection, Unequal Diameter Elbow

  CK KINZOKU

  Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
  [Features]
  ·No PVC is used in the core joint, making it easy to recycle.
  ·Excellent anti-corrosion performance due to the dual structure of lip and O-ring.
  ·Also supports rolled screws.
  · Made in Japan.
  [Applications]
  ·Ideal for changing the size of bends in buried lining pipes.

  Days to Ship:	11 Day(s) or more

• 

  Pipe Fitting with Sealant, WS Fitting, Variable Diameter Socket

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. The wrapping of sealing tape around the threaded section of the connecting pipes is not required for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, and therefore reduces the burden of piping work.

  Days to Ship:	16 Day(s) or more

• 

  HB Fitting Bushing

  HITACHI KINZOKU

  Use the HB fitting for coupling feed water pipes, piping for connected water supply and fire extinguishing equipment carrying inert gas (carbon dioxide) and other piping subject to Schedules 40 and 80 of JIS G 3454, "Carbon steel tube for pressure service."

  Days to Ship:	16 Day(s) or more

• 

  Core Fittings - for Lining Steel Pipe Connection - Elbow with Different Diameters

  CK KINZOKU

  Threaded fittings for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
  [Features]
  ·No PVC is used in the core joint, making it easy to recycle.
  ·Excellent anti-corrosion performance due to the double structure of lip and O-ring.
  ·Also supports rolled screws.
  · Made in Japan.
  [Applications]
  ·For size conversion when lining piping is bent.

  Days to Ship:	11 Day(s) or more

• 

  Ck 20 K Screw-in Fitting Tee with Different Diameters

  CK KINZOKU

  Fittings for fire extinguishing pressure piping.
  [Features]
  ·Certified by the Japan Fire Equipment Safety Center.
  [Applications]
  ·For removing branches from STPG VS pipes.

  Days to Ship:	11 Day(s) or more

• 

  External Surface Transparent Coating for Fire Protection Piping 10 K Fittings VF Gold, Unequal Diameter Socket

  CK KINZOKU

  Buried joint for fire extinguishing piping.
  [Features]
  ·Attachment of the rubber ring can be easily confirmed.
  ·Correct construction is possible by managing extra screws.
  ·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
  · Made in Japan.
  ·GOOD DESIGN award winning product.
  [Applications]
  ·For size conversion of VS piping.

  Days to Ship:	11 Day(s) or more

• 

  Screw-In PL Fitting, Bushing

  JFEPIPEFITTING

  [Features]
  ・ RING Brand fittings are products produced with state-of-the-art equipment and thorough quality control
  ・ The RING Brand PL fitting has a powder epoxy resin coated on its inner and outer surfaces by a special coating method, excluding the threaded section, and has excellent adhesion, corrosion resistance, etc.
  ・ Both products are safe to use

  Days to Ship:	16 Day(s) or more

• 

  Pipe-End Anticorrosion Fitting for Water Supply Dual-Use Type, Core Fitting, C Core, Reducing Socket

  JFEPIPEFITTING

  A perfect mechanism for red water countermeasures with soft workability regardless of pipe type. This is a RING Brand core fitting for 2 different pipe types joint.
  [Features]
  ・ Supports 2 pipe types
  ・ Excellent corrosion-proof performance (Dual structure of lip and O-ring)
  ・ Excellent workability
  ・ It can also be used for rolling threads (Polyethylene powder lining steel pipe for water supply "rolled thread compatible products")

  Days to Ship:	11 Day(s) or more

• 

  Stainless Steel Screw-in Pipe Fitting, Bushing

  NAGOYA

  NAGOYA, screw-in fitting / threaded type flange, stainless steel screw-in pipe fitting, bushing.

  Days to Ship:	14 Day(s) or more

• 

  Stainless Steel Screw-in Pipe Fitting, Straight Elbow

  NAGOYA

  NAGOYA, screw-in fitting / threaded type flange, stainless steel screw-in pipe fitting, street elbow.

  Days to Ship:	14 Day(s) or more

• 

  Pipe Fitting Socket

  HITACHI KINZOKU

  JIS B 2301 screw-in type malleable cast iron fitting
  
  [Features]
  · Environmentally friendly: Lead and cadmium are greatly reduced.
  · Uses high purity zinc metal to reduce lead (Pb) and cadmium (Cd) content significantly.
  · Excellent manufacturing method: New heavy metal addition is not required.
  · Development of original manufacturing facilities and preprocessing methods has established the technology for mass production, and heavy metals such as bismuth (Bi) are used instead of lead.
  · Excellent performance: Appearance and performance equivalent to conventional plated parts.
  · Satisfies the specifications stipulated in JIS B 2301 (Screw type malleable cast iron pipe fittings), and has a glossy plating on the outside similar to that of conventional products.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting - Female/Male T

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Pipe End Anti-Corrosion Pipe Fittings Elbow

  HITACHI KINZOKU

  The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  Corrosion Resistant Pipe End Fitting T

  HITACHI KINZOKU

  By integral molded polyolefin resin visceral core, hide the iron land exposed portion of the tube end of the screw back and lining steel pipes from the fluid, and provide an excellent anti-corrosion effect. It is easy to construct management because it is integrally molded.

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  Pipe End Corrosion Prevention Fitting Socket

  HITACHI KINZOKU

  The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting with Sealant, WS Fitting, Variable Diameter Elbow

  HITACHI KINZOKU

  The female fitting screws are coated with a fluororesin pre-coat sealant. Wrapping sealing tape around the male threaded section of connecting pipes is not required for nominal 4B or below. The fluorine-based sealant has a lubricating effect, and therefore reduces the burden of piping work.

  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting with Sealant, WS Fitting, Variable Diameter T

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. No need to wrap sealing tape around the threaded section of connecting pipes for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, reducing piping work.

  Days to Ship:	15 Day(s) or more

• 

  Pipe Fitting With Sealant, WS Fitting, Bushing

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. Wrapping sealing tape around the threaded section of connecting pipes is not required for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, and therefore reduces the burden of piping work.

  Days to Ship:	16 Day(s) or more

• 

  HB Fitting, Socket

  HITACHI KINZOKU

  Use the HB fitting for coupling feed water pipes, piping connected water supplies, transporting fire extinguishing equipment with inert gases (carbon dioxide), and other piping subject to Schedules 40 and 80 of JIS G 3454, carbon steel tube for pressure services.

  Days to Ship:	15 Day(s) or more

• 

  Drainage Screw Fitting 90° Elbow

  HITACHI KINZOKU

  Works with sewage, effluents, ventilated air, and rainwater. Materials, shape, dimensions, and precision conform to Japanese Industrial Standard JIS B 2303 (screwed drainage fittings).

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Drainage Screw Fitting, 90°, Large Bend Elbow

  HITACHI KINZOKU

  Works with sewage, effluents, ventilated air, and rainwater. Materials, shape, dimensions, and precision conform to Japanese Industrial Standard JIS B 2303 (screwed drainage fittings).

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Drainage Screw Fitting 90° Y

  HITACHI KINZOKU

  Working fluids are sewage, effluents, ventilated air, and rainwater. The materials, shapes, dimensions, and precision conform to the Japanese Industrial Standard (JIS B 2303 Screwed drainage fittings).

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  90° Long Radius Drainage Fitting

  HITACHI KINZOKU

  Works with sewage, effluents, ventilated air, and rainwater. Materials, shape, dimensions, and precision conform to Japanese Industrial Standard JIS B 2303 (screwed drainage fittings).

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Drainage Screw Fitting, 45°Y

  HITACHI KINZOKU

  Works with sewage, effluents, ventilated air, and rainwater. Materials, shape, dimensions, and precision conform to Japanese Industrial Standard JIS B 2303 (screwed drainage fittings).

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Drainage Screw Fitting Socket

  HITACHI KINZOKU

  Usable fluids are sewage, effluents, ventilated air, and rainwater. The materials, shapes, dimensions, and precision conform to the Japanese Industrial Standards (JIS B 2303 Screwed drainage fittings).

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Black or white Fitting Reducing Socket

  YODOSHI

  Black or white fitting reducing socket that can be used with pipes made of black heart malleable cast iron for water, oil, steam, air or gas.

  Days to Ship:	17 Day(s) or more

• 

  ZD Fitting, White Type, Reducing Elbow

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at 120°C or below), 1.0 MPa (steam, air, gas, and oil at 300°C or below)
  
  [Features]
  · For the ZD fitting, the screw portion of the screw-on malleable cast iron pipe fitting has been coated with a fluorine polymer resin (as a sealant) and heat-cured.
  · Two types are available: a white type and a Komacoat type (see screw-type malleable cast iron fitting).
  · Application of sealant and winding of sealant tape are not required reducing the number of man-hours required to run pipes.
  · Provides stable sealing performance.
  · Prevents rusting on threads included on parts that are stored for an extended period of time.
  · *Komacoat types are made to order.

  Days to Ship:	20 Day(s) or more

• 

  ZD Fitting, White, Reducing Socket

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C or below), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	20 Day(s) or more

• 

  ZD Fitting, White Type, Reducing Tees

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at 120°C or below), 1.0 MPa (steam, air, gas, and oil at 300°C or below)
  
  [Features]
  · For the ZD fitting, the screw portion of the screw-on malleable cast iron pipe fitting has been coated with a fluorine polymer resin (as a sealant) and heat-cured.
  · Two types are available: a white type and a Komacoat type (see screw-type malleable cast iron fitting).
  · Application of sealant and winding of sealant tape are not required reducing the number of man-hours required to run pipes.
  · Provides stable sealing performance.
  · Prevents rusting on threads included on parts that are stored for an extended period of time.
  · *Komacoat types are made to order.

  Days to Ship:	16 Day(s) or more

• 

  ZD Fittings, White Goods, Four-Way Reducing Cross

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	20 Day(s) or more

• 

  Steel Pipe Fitting, Screw-In Pipe Fitting, Street Elbow

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	16 Day(s) or more

• 

  Reducing Elbow Pipe Fittings for Steel Pipes, Screw-In

  RIKEN

  Maximum operating pressure: 2.5 MPa (static water: ≤ 120°C), 1.0 MPa (vapor, air, gas, and oil: ≤ 300°C).

  Days to Ship:	20 Day(s) or more

• 

  Fitting for Steel Pipes, Screw-in Type Pipe Fitting, Reducing Socket

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	20 Day(s) or more

• 

  Fitting for Steel Pipes, Screw-in Type Pipe Fitting, Reducing Tee

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	20 Day(s) or more

• 

  Steel Pipe Fitting, Threaded Pipe Fitting, 4-Way Reducing Cross

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Days to Ship:	20 Day(s) or more

• 

  Stainless Steel Screw-in Fitting, Hexagonal Bushing B

  ON INDUSTRIES

  It is a stainless steel screw-in fitting, hexagonal bushing B, made by O.N. Industries.

  Days to Ship:	16 Day(s) or more

• 

  ESLON, Eslo-Coat LX Fitting, Reducing Socket (RS)

  SEKISUI CHEMICAL

  The core is adhered to the inner surface of the lined steel pipe, effectively blocking the permeation of water to the metal surface, and thereby preventing corrosion of the tube end portion and the fitting body.

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

Loading...