Fittings for Stainless Steel Pipes（Type：Fitting）

• 

  Stainless Steel Pipe Fittings/Threaded Union

  MISUMI

  Includes ferrules (here -> SKFPK)

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Stainless Steel Pipe Fittings/Union

  MISUMI

  Includes ferrules (here -> SKFPK)

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	14 Day(s) or more

• 

  Stainless Steel Pipe Fittings/Elbow/90 Deg./Threaded End/Union

  MISUMI

  Includes ferrules (here -> SKFPK)

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Stainless Steel Pipe Fittings/Tapped Union

  MISUMI

  Includes ferrules (here -> SKFPK)

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Stainless Steel Pipe Fittings/Union T

  MISUMI

  Includes ferrules (here -> SKFPK)

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Water Faucet Elbow with Mechanical Fitting Seat for Stainless Steel Pipes

  HITACHI KINZOKU

  A mechanical type tube fitting developed for stainless steel pipes. A highly reliable fitting with superb corrosion and heat resistance that makes full use of the special lightweight and strong characteristics of stainless steel piping.
  
  [Features]
  · Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
  · A highly reliable fitting with superb corrosion and heat resistance that makes full use of the special lightweight and strong characteristics of stainless steel piping.
  · The packing has stable long term sealing properties due to its structure in which the appropriate pressure is applied to the surface.
  · The packing is made using a fluorine rubber material with superior durability, heat resistance, and resistance against aqueous chlorine that satisfies leaching standards when it is used as a water supply device.
  · Because the connector between the pipe and the fitting has a tapered surface and is tightened using a nut, a stronger connecting force is achieved via the "wedge effect".
  · The packing does not have to be removed from the fitting while laying pipe.
  · Furthermore, because piping cannot be done unless the pipe ends are expanded, the pipes do not fall out.
  · Loose pipes can be found easily using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
  · If you have forgotten to perform the final tightening, liquids will leak from fittings during pressure tests, informing you that further tightening is required.
  · Expanded pipes can be easily corrected after setting using the automatic device.
  · The pipe can easily be supported and secured in place as the connecting part between the pipe and the fitting is not prone to wobbling.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Stainless Steel Pipe Fittings/Union Elbow/90 Deg.

  MISUMI

  Includes ferrules (here -> SKFPK)

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Stainless Steel SUS316 FC-PF Pressure Gauge Union (PF)

  FUJI SPECIAL

  [Features]
  · Precision design tolerant of high pressure, shock, vibration, vacuum, and temperature changes.
  · The pipe uses an ideal double ferrule scheme so no torsion occurs

  Days to Ship:	14 Day(s) or more

• 

  Stainless Steel Fitting for High-Pressure, Half Union

  KITZ

  Kitz Stainless Pipe Fittings Stainless Steel High Pressure Fitting Half Union

  Days to Ship:	14 Day(s) or more

• 

  for Stainless Steel, SUS304, Union Tee, ST

  FUJI SPECIAL

  Adopts a strong structure against shock and vibration with completely sealing high pressure fluid via the Ermeto type in which the cutting edge of a sleeve is firmly bit to a pipe.

  Days to Ship:	15 Day(s) or more

• 

  for Stainless Steel, SUS304 Fureyado Union SY

  FUJI SPECIAL

  It is a special mating construction type in which the cutting edge of the sleeve is firmly inserted into the pipe, completely seals the high-pressure fluid, and has a structure that is resistant to impact pressure and vibration.

  Days to Ship:	15 Day(s) or more

• 

  Stainless Steel, SUS316 MC Half Union

  FUJI SPECIAL

  [Features]
  ・ Precision design to withstand high pressure, impact, vibration, vacuum and temperature changes
  ・ Ideal double ferrule system that pipe does not have helix angle
  ・ It is compact and lightweight, has low tightening torque, and no special tools required
  ・ It is easy to connect and disconnect and economical to reuse
  ・ Reliable seal performance due to mutual interlocking action unique to double ferrule
  ・ Depending on the torque and shaft core direction, it can be inserted to the pipe with the fitting set

  Days to Ship:	8 Day(s) or more

• 

  SUS316 UE Union Elbow for Stainless Steel

  FUJI SPECIAL

  [Features]
  ・ Precision design to withstand high pressure, impact, vibration, vacuum and temperature changes
  ・ Ideal double ferrule system that pipe does not have helix angle
  ・ It is compact and lightweight, has low tightening torque, and no special tools required
  ・ It is easy to connect and disconnect and economical to reuse
  ・ Reliable seal performance due to mutual interlocking action unique to double ferrule
  ・ Depending on the torque and shaft core direction, it can be inserted to the pipe with the fitting set

  Days to Ship:	14 Day(s) or more

• 

  Double Ferrule Type Tube Fitting Male Connector MDCT

  IHARA SCIENCE

  Double ferrule type tube fitting, male connector MDCT made by Ihara Science – a company with a proven track record in the field.
  · Material: Stainless steel.
  · For use with water, air, steam, chemicals, and oil.
  · Applicable tube material: Stainless steel.

  CAD ：

  3D

  Days to Ship:	14 Day(s) or more

• 

  Double Ferrule Model Tube Fitting Female Elbow DLF

  IHARA SCIENCE

  The double ferrule type tube fittings female elbow is DLF made by Ihara Science, who boast a proven track record in high pressure fittings that demand high quality.
  ・Materials: Stainless steel
  ・Applicable fluids: Water, air, steam, gas, chemicals and oil
  ・Applicable Tube Materials: Stainless steel

  CAD ：

  3D

  Days to Ship:	58 Day(s) or more

• 

  General Pipe Fittings-Hex Nipple-HN

  CHIBIN

  Applicable fluids include water, air, and oil. Screw diameters are the same, and screws with diameters ranging from 1/8 to 2 inches can be selected. Stainless steel is the material used. A Taiwanese manufacturer of piping parts/hydraulic equipment products established in 1980. ISO: 9001-certified in 2006. Achieves stable quality at low cost.

  Days to Ship:	16 Day(s) or more

• 

  KOMA SUS FIT, Tees, T

  RIKEN

  A pipe-expanding mechanical fitting that uses a dedicated pipe expander for high load bearing capacity.

  Days to Ship:	10 Day(s) or more

• 

  SUS304 Union Elbow for Stainless Steel SEY

  FUJI SPECIAL

  It is a special mating construction type in which the cutting edge of the sleeve is firmly inserted into the pipe, completely seals the high-pressure fluid, and has a structure that is resistant to impact pressure and vibration.

  Days to Ship:	15 Day(s) or more

• 

  SUS316 RU Reducing Union for Stainless Steel

  FUJI SPECIAL

  [Features]
  · The precision design withstands high pressure, shock, vibration, vacuum, and temperature changes.
  · The pipe uses an ideal double ferrule method so there is no torsion

  Days to Ship:	15 Day(s) or more

• 

  Double Ferrule Type Tube Fitting Male, Elbow, DLN

  IHARA SCIENCE

  The double ferrule type tube fittings male elbow is DLN manufactured by Ihara Science, who boast a proven track record in high pressure fittings that demand high quality.
  ・Materials: Stainless steel
  Applicable fluids: Water, air, steam, gas, chemicals and oil
  ・Applicable Tube Materials: Stainless steel

  CAD ：

  3D

  Days to Ship:	14 Day(s) or more

• 

  Double Ferrule Type Tube Fitting, Male Connector DCT

  IHARA SCIENCE

  For high-pressure fittings that demand high quality. A double ferrule type tube fitting male connector DCT manufactured by Ihara Science Corp who have an excellent proven track record.
  · Material: stainless steel
  · Usable fluids: water, air, steam, gases, chemicals, and oils
  · Applicable tube material: stainless steel

  CAD ：

  3D

  Days to Ship:	14 Day(s) or more

• 

  Double Ferrule Type Tube Fitting Union DUA

  IHARA SCIENCE

  The double ferrule type tube fittings union is DUA made by Ihara Science, who boast a proven track record in high pressure fittings that demand high quality.
  ・Materials: Stainless steel
  ・Applicable fluids: Water, air, steam, gas, chemicals and oil
  ・Applicable Tube Materials: Stainless steel

  CAD ：

  3D

  Days to Ship:	14 Day(s) or more

• 

  Double Ferrule Model Tube Fitting Union Tee MDTA

  IHARA SCIENCE

  The double ferrule type tube fittings union tee is MDTA made by Ihara Science, who boast a proven track record in high pressure fittings that demand high quality.
  ・Materials: Stainless steel
  ・Applicable fluids: Water, air, steam, gas, chemicals and oil
  ・Applicable Tube Materials: Stainless steel

  CAD ：

  3D

  Days to Ship:	14 Day(s) or more

• 

  SUS316 Stainless-Steel Double Ferrule System Bulkhead Union

  SANKOMS

  Materials: Stainless steel
  · Applicable fluids: Water, air, oil
  · Applicable Tube Materials: Stainless steel, Resin

  Days to Ship:	12 Day(s) or more

• 

  SUS316 Stainless Steel Double Ferrule Fitting Cap

  SANKOMS

  [Features]
  · Double ferrule type supports a tube with two ferrules, a front ferrule and a back ferrule, and its structure retains high airtightness in a wide range from high pressure to vacuum.
  · Product is compatible with tubes and pipes of various standards: Compatible millimeter sizes include φ2 mm - φ25 mm while compatible inch sizes include φ1/16inch - φ1inch, and compatible copper pipe sizes are 6A - 15A.
  · The material used is SUS316.
  · Max operating pressure is 25.5MPa and the operating temperature range is -196 - 360°C.
  · Note that this range varies depending on the type of tubing used

  Days to Ship:	12 Day(s) or more

• 

  Stainless Steel Pipe Fittings - Elbow

  CHIBIN

  The name is listed incorrectly in the catalog.
  (Correct) Elbow
  (Incorrect) Male Threaded Straight Fitting.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Stainless Steel Pipe Press Fitting SUS Press Caps

  CK KINZOKU

  Press type fitting for stainless steel pipe.
  [Features]
  ·Fittings are equipped with the industry's first press confirmation function.
  ·Easy and reliable installation is possible with a special tightening tool.
  ·Thin-walled stainless steel pipes and SUS presses are lightweight, so the work load is greatly reduced compared to conventional piping work.
  ·Safe and hygienic, with no need for threading or brazing.
  ·Piping systems made of thin-walled stainless steel pipes and SUS presses are often made from a single material, making them easy to recycle.
  [Applications]
  ·End of stainless steel pipe.

  Days to Ship:	17 Day(s) or more

• 

  Stainless Steel Pipe Fittings/Stepped Union

  MISUMI

  Includes ferrules (here -> SKFPK)

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	14 Day(s) or more

• 

  Stainless Steel Pipe Fittings/T Union/Threaded Branch

  MISUMI

  Includes ferrules (here -> SKFPK)

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Stainless Steel High Pressure Fittings Panel Union

  KITZ

  KITZ, Stainless Steel Pipe Fitting, Stainless Steel High-Pressure Fittings Panel Union

  Days to Ship:	68 Day(s) or more

• 

  Mechanical Fitting 45 Degree Elbow for Stainless Steel Piping

  HITACHI KINZOKU

  A mechanical tube fitting developed for stainless steel pipes. Highly reliable, it takes advantage of stainless steel's strength and light weight to provide superb corrosion and heat resistance.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Mechanical Fitting Flange Adapter for Stainless Steel Pipes

  HITACHI KINZOKU

  Mechanical type tube fitting developed for stainless steel pipes. A highly reliable fitting with superb corrosion resistance and heat resistance, which optimizes the special characteristics of lightweight and strong stainless steel piping.
  
  [Features]
  · Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
  · Highly reliable fitting benefits from the light and strong characteristics of stainless steel pipes, and has superior corrosion and heat resistance properties.
  · The packing has stable long-term sealing properties due to a structure with appropriate pressure applied to the surface.
  · A fluorine rubber material with superior durability, heat resistance, and resistance against aqueous chlorine that satisfies leaching standards when used as a water supply device is used in the packing.
  · Because the connector between the pipe and the fitting has a tapered surface and is tightened using a nut, a strong connecting force is achieved by the so-called wedge effect.
  · The packing does not have to be removed from the fitting while laying pipe.
  · Furthermore, because piping cannot be done unless pipe ends are expanded, pipes do not fall out.
  · Loose pipes can be found easily using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
  · When final tightening is forgotten, water will leak from fittings during water pressure tests, thus allowing loose pipes to be detected.
  · Expanded pipes can be corrected easily using an automatic machine after pipe setting.
  · The pipe can easily be held and secured because the connector between the pipe and the fitting is not prone to wobbling.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  KOMA SUS FIT, Weld Adapter, YA

  RIKEN

  A pipe-expanding mechanical fitting that uses a dedicated pipe expander for high load bearing capacity.

  Days to Ship:	14 Day(s) or more

• 

  MR Joint II, Reducing, Socket, RS

  RIKEN

  Compression pipe fitting. Cap nut is tightened to crimp sleeve on pipe, creating a seal and preventing pipe slippage.

  Days to Ship:	14 Day(s) or more

• 

  SUS304 Half Elbow SE for Stainless Steel Use

  FUJI SPECIAL

  The Emerto type features a structure that is strong against impact and vibration and that completely seals high pressure liquids. The sleeve's cutting edge firmly fits onto the pipe.
  
  [Features]
  · The Emerto type features a structure that is strong against impact and vibration and that completely seals high pressure liquids. The sleeve's cutting edge firmly fits onto the pipe.
  - Furthermore, piping can be completed via a simple procedure which requires only cutting the pipe and tightening of the nuts (screw machining, welding, flaring, etc. not required), so fewer man-hours are required for piping while the product is made more compact and lighter, providing an economical piping joint solution.

  Days to Ship:	14 Day(s) or more

• 

  For Stainless Steel SUS304 Half Union SK

  FUJI SPECIAL

  [Features]
  ・ The sleeve cutting edge is firmly inserted into the pipe, and it is the special mating construction type that completely seals high-pressure fluid and has a structure resistant to impact pressure and vibration.
  ・ Complete piping can be done by simply cutting the pipe and tightening the nut (no need for thread cutting, welding, flare, etc.), so It is a economical fitting that has fewer piping labor-hours, more compact equipment, and achieves less weight.

  Days to Ship:	14 Day(s) or more

• 

  for Stainless Steel, SUS304 Pressure Gauge Union (PF), SP

  FUJI SPECIAL

  It is a special mating construction type in which the cutting edge of the sleeve is firmly inserted into the pipe, completely seals the high-pressure fluid, and has a structure that is resistant to impact pressure and vibration.

  Days to Ship:	15 Day(s) or more

• 

  for Stainless Steel, SUS316, MBT, Dual Opening Tee (Male)

  FUJI SPECIAL

  Precision designed to withstand high pressure, shock, vibration, vacuum pressure, and temperature fluctuations. The pipe uses an ideal double ferrule method to eliminate torsion.

  Days to Ship:	15 Day(s) or more

• 

  SUS316 MC-PF Half Union for Stainless Steel (PF)

  FUJI SPECIAL

  Precision designed to withstand high pressure, shock, vibration, vacuum pressure, and temperature fluctuations. The pipe uses an ideal double ferrule method so there is no torsion

  Days to Ship:	15 Day(s) or more

• 

  SUS316 ME Half Elbow for Stainless Steel

  FUJI SPECIAL

  [Features]
  ・ Precision design to withstand high pressure, impact, vibration, vacuum and temperature changes
  ・ Ideal double ferrule system that pipe does not have helix angle
  ・ It is compact and lightweight, has low tightening torque, and no special tools required
  ・ It is easy to connect and disconnect and economical to reuse
  ・ Reliable seal performance due to mutual interlocking action unique to double ferrule
  ・ Depending on the torque and shaft core direction, it can be inserted to the pipe with the fitting set

  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel SUS316 UC Cross Union

  FUJI SPECIAL

  [Features]
  · Precision design tolerant of high pressure, shock, vibration, vacuum, and temperature changes.
  · The pipe uses an ideal double ferrule scheme so no torsion occurs

  Days to Ship:	17 Day(s) or more

• 

  Tube Expansion Fitting for Stainless Steel Pipes, BK Joint, Ball Valve (Regular Port Type)

  BENKANJAPAN

  [Features]·Made of stainless steel, high durability. ·High safe non-petrochemical materials used.

  Days to Ship:	21 Day(s) or more

• 

  Double Ferrule Type Tube Fitting, Male Elbow, MDLN

  IHARA SCIENCE

  The double ferrule type tube fittings male elbow is MDLN manufactured by Ihara Science, who boast a proven track record in high pressure fittings that demand high quality.
  ・Materials: Stainless steel
  ・Applicable fluids: Water, air, steam, gas, chemicals and oil
  ・Applicable Tube Materials: Stainless steel

  CAD ：

  3D

  Days to Ship:	14 Day(s) or more

• 

  Double Ferrule Type Tube Fitting Female Connector DSA

  IHARA SCIENCE

  The double ferrule type tube fittings female connector is DSA made by Ihara Science, who boast a proven track record in high pressure fittings that demand high quality.
  ・Materials: Stainless steel
  ・Applicable fluids: Water, air, steam, gas, chemicals and oil
  ・Applicable Tube Materials: Stainless steel

  CAD ：

  3D

  Days to Ship:	14 Day(s) or more

• 

  Double Ferrule Type Tube Fitting Union Tee, DTA

  IHARA SCIENCE

  The double ferrule type tube fittings union tee is DTA made by Ihara Science, who boast a proven track record in high pressure fittings that demand high quality.
  ・Materials: Stainless steel
  ・Applicable fluids: Water, air, steam, gas, chemicals and oil
  ・Applicable Tube Materials: Stainless steel

  CAD ：

  3D

  Days to Ship:	14 Day(s) or more

Loading...