Ball Valves（Ball Valve Type：Full Bore Type）

• 

  Ball Valves/Stainless Steel/High Flow Rate/PT Female/PT Female

  MISUMI

  [Main Body Shape]Straight "Main body material" You can choose C3771BE or SCS14A.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Stainless Steel General-Purpose 10K Ball Valve Flange

  KITZ

  • Stainless Steel General-Purpose Ball Valve Flange
  • Kitz product code: 10UTB, 10UTBD, 10UTBDM, 10UTBM, 10UTBO, 10UTDZ, 10UTDZM, G-10UTB, G-10UTBD, G-10UTBM and G-10UTDZ.
  • Main body ball valves shape: straight.
  • Ball Valve are Full bore type.
  • The Body and body cap are Stainless Steel SCS13A and SCS14A.
  • Ball material: Stainless steel SUS316, SUS304, SCS14A and SC13A.
  • Stem material: Stainless steel SUS306 and SUS304.
  • Ball seal material: Hypatite PTFE.
  • Handle Shape: Lever
  type and Gear.
  • Applicable Fluid: Water.
  • Flange End Connection: JIS B2220 (10K) standards.
  

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  Brass General-Purpose Type 600 Ball Valve Screw-in (Lever)

  KITZ

  [Features]
  ・ Secure sealing of pipe connection
  ・ Hygienic with zero fluid contamination
  ・ High durability against freezing and impact
  ・ Excellent workability and efficient piping is possible

  • STOCK

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  600 Type Brass Screw-in Type Ball Valve (Lever Handle / Butterfly Handle) 600RC-N

  TOYO VALVE

  [Features]
  · A ball valve that can be opened and closed by rapidly turning the lever handle 90° and has many features.
  · For example (1) Not trending towards fluid sealing mechanism prevents piping mistake. (2) Sealing performance can be maintained for long time (3) Saves piping space. (4) Low operating torque. (5) Very low pressure loss compared to other valve types. (6) No maintenance fee required.
  · Because of its structure, the ball valve is not suitable for throttling (can be used for throttling in piping for gases).
  · In this case, use the globe valve as much as possible.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Stainless Steel General-Purpose 10K Screw-in Ball Valve

  KITZ

  • 10UT and 10UTM series Stainless Steel General-Purpose Screw-in Ball Valve
  • Kitz product code: 10UT and 10UTM.
  • Main body ball valves shape: straight.
  • Main Body Material: Stainless Steel SCS13A, SCS14A.
  • 10UT and 10UTM Stem material: Stainless steel SUS306, SUS304.
  • Ball material: Stainless steel SUS316, SUS304, SCS14A, SC13A.
  • Ball seal material: PTFE.
  • Handle material: Ductile iron FCD400-15.
  • 10UT and 10UTM Ball Valve: Standard bore type
  • Supply and control side RC connections: BS21 (JIS B0203) standards.
  • Applicable Fluid : Water.
  • Normal Operating Pressure: 10K.
  

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  Cast Iron General-Purpose, Screw-in 10K Ball Valve

  KITZ

  [Brand]KITZ (KITZ)
  [Material]
  Main Body: FC200
  Ball: SCS13A/SUS304/SUS304TP
  Ball Seat: PTFE
  Packing: PTFE
  [Structure]
  Full Bore
  
  Cast Iron Ball Valve.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Ball Valve With 10K Electric Actuator, Cast Iron

  KITZ

  • Cast Iron Ball Valve with Electric Actuator
  • Kitz product code: EXH100-10FCT, EXH100-10FCTB, EXH200-10FCT and EXH200-10FCTB.
  • Main body ball valves shape: straight.
  • Ball Valve are Full bore type.
  • The Body and Body cap material: Ductile Cast Iron FCD-S.
  • Ball material: Stainless steel SCS13A, SUS304, SUS304TP.
  • Ball Seal material: PTFE.
  • Stem material: Stainless steel SUS403.
  • Supply & Control side connection: JIS B2239 (10K) and JIS B0203 standards.
  • Applicable Fluid : Water and Oil.
  • Electric Actuator Applicable Voltage: AC100V and for AC200V.
  • Normal Operating Pressure: 10K.
  

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Air Operated Ball Valve, 2-Port Valve (Compact Rotary Valve)

  CKD

  [Brand]CKD
  [Material]
  Body: Bronze / stainless steel / stainless steel oil-free specifications
  [Structure]
  Full-bore / standard bore
  
  Air-operated ball valve 2-port valve with reliable operation and high reliability.
  [Features]
  ·Uses an air-driven double piston system that uses a rack and pinion
  ·Completely air-operated structure allows safe use even in explosive atmosphere
  ·Can be used outdoors (Excluding those with a solenoid valve for switching)
  ·Since it rotates in the forward and reverse directions, even if contaminants are mixed in, they can be easily removed
  [Applications]
  ·Can also be used in an explosive atmosphere (Excluding those with a solenoid valve for switching)
  ·Uses a structure and material that are resistant to scale and water stains

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Bronze General-Purpose 10K Ball Valve Flange

  KITZ

  • TB and TL
  series Ball valve full bore type - Flanged Ends.
  • Kitz product code: TB and TL
  • Main body ball valves shape: straight.
  • The Body and body cap are Cast bronze.
  • TB/TL ball material is forged brass C3771.
  • Stem material: Special brass C3531.
  • Ball seal material: polymer PTFE.
  • Handle Shape: Lever type.
  • End connection: JIS B2240 standards.
  • Applicable Fluid : Water, Oil and Gas.
  • flanged connection size: 15A, 20A, 25A, 32A, 40A, 50A, 65A, 80A and 100A.
  • Normal Operating Pressure: 10K
  

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Stainless Steel CSF Screw-in Ball Valve

  CONSUSS

  [Brand]consus
  [Material]
  Main Body: SUS316/SUS316L
  [Structure]
  Full Port
  
  Stainless steel 316 or stainless steel 316 L full bore ball valve.
  [Features]
  ·Two-piece body, full-port structure
  ·The seat material is PTFE, and the body material is stainless steel 316 and stainless steel 316L.
  ·Since NEW PTFE is used for the seat part, it can be used with various fluids.
  [Applications]
  ·Suitable for various stainless steel pipes

  Days to Ship:	10 Day(s) or more

• 

  Brass General-Purpose Type 600 Screw-in Ball Valve (Butterfly Shaped Handle)

  KITZ

  [Features]
  ・ Secure sealing of pipe connection
  ・ Hygienic with zero fluid contamination
  ・ High durability against freezing and impact
  ・ Excellent workability and efficient piping is possible

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  General-Purpose 10K Ball Valve Flange, Ductile Iron

  KITZ

  [Features]
  ・ Ductile iron valves can be used as valves for high-pressure gas equipment

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Cast Iron General-Purpose 10K Ball Valve Flange

  KITZ

  • 10FCTB/10FCTR series Cast Iron Ball Valve - Flange ends connection.
  • Kitz product code: 10FCTB and 10FCTR.
  • 10FCTB full bore type and 10FCTR reduced bore type.
  • The Body and body cap are Cast iron FC200.
  • 10FCTB/10FCTR Ball material: Stainless steel SCS13A,SUS304 ,SUS304TP.
  • 10FCTB/10FCTR Stem material: Stainless steel SUS403.
  • Ball seal material: Hypatite PTFE.
  • Handle Shape: Lever
  type.
  • Handle material: Ductile iron FCD400.
  • Cap bolt material: Carbon steel SS400.
  • Applicable Fluid: Water, Oil, Air, Gas and Saturated Steam.
  • Flange ends connection: JIS B2239 (10K) standards.
  

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Stainless Steel 10K Ball Valve With Small Electric Actuator

  KITZ

  EA type (100 V AC) ON-OFF control, 90° forward/reverse rotation.
  [Features]
  ・ The manufacturer has developed a high-performance, yet compact motor that has achieved fast opening and closing speed and compactness.
  ・ Cost effective because the power consumption is small and the power is turned off after the operation
  ・ Consists of minimal parts, extremely few failures, and excellent durability
  ・ In the event of a power failure, you can also open and close manually
  ・ Eliminates the problems of general solenoid valves, such as the occurrence of water hammer and malfunctions due to foreign objects being caught
  ・ The power supply is AC100/200 V, DC12/24 V, with a built-in relay, with a terminal box, and a 180-degree rotation type series is standardized to meet the needs of various customers.
  ・ In order to prevent the motor coil from burning, the overload protection device is used.
  ・ Can also be used in outdoor piping lines

  Days to Ship:	16 Day(s) or more

• 

  Stainless Steel Valve - CSH-SS High Ground Insertion Butt Weld Ball Valve

  CONSUSS

  • CSH-SS Stainless Steel Valve / Butt Weld Ball Valve• Compliant standard: RoHS10.
  • Main body ball valves shape: straight.
  • Main Body material: Stainless Steel SUS316.
  • CSH-SS ball valve is full bore type.
  • CSH-SS is a 3-piece ball valve.
  • 3-piece ball valves can be easily repaired or replaced for cleaning and maintenance.
  • 3-piece ball valves 3 section are available one main body and two pipe connectors.
  • Handle Shape : Lock Handle type.
  • Nominal diameter 5 sizes are available 15A, 20A, 25A, 40A and 50A.
  

  Days to Ship:	10 Day(s) or more

• 

  Ball Valve With Brass 10K Electric Actuator

  KITZ

  EA type (100 V AC/ 200 V AC) ON-OFF control, 90° forward/reverse rotation.
  [Features]
  ・ The manufacturer has developed a high-performance, yet compact motor that has achieved fast opening and closing speed and compactness.
  ・ Cost effective because the power consumption is small and the power is turned off after the operation
  ・ Consists of minimal parts, extremely few failures, and excellent durability
  ・ In the event of a power failure, you can also open and close manually
  ・ Eliminates the problems of general solenoid valves, such as the occurrence of water hammer and malfunctions due to foreign objects being caught
  ・ The power supply is AC100/200 V, DC12/24 V, with a built-in relay, with a terminal box, and a 180-degree rotation type series is standardized to meet the needs of various customers.
  ・ In order to prevent the motor coil from burning, the overload protection device is used.
  ・ Can also be used in outdoor piping lines

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Stainless Steel Ball Valve, Full Bore TSS Series, Lever Handle Type

  HAMAI

  The main body is made of highly corrosion-resistant SCS14, providing maximum flow rate with little fluid resistance.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Stainless Steel Ball Valve, TSS Series, Lever Handle Type, Oil-Free Processing

  HAMAI

  Oil-free processed ball valves are valves that have undergone degreasing and cleaning, and are manufactured with dust-proofing in mind. These valves are widely used in the healthcare, oxygen production, food products, paint, high purity gas, semiconductors, and biotech-related industries.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Ball Valves, Full-Bore, Oversized Ball Type, Green Lever Handle, FF Type

  ONDASEISAKUSYO

  Full-bore designed to the same nominal diameter as the pipe. Optimal for use in large flow-rate pipelines.

  CAD ：

  2D

  Days to Ship:	1 Day(s) or more

• 

  Stainless Steel General-Purpose 10K Ball Valve (Three-Way) Flange

  KITZ

  • Ball Valve (Three-Way) Stainless Steel Flange Type
  • Kitz product code: 10UTB2L, 10UTB4LA, 10UTB4LAM and 10UTB4TA series.
  • Ball Valve is full bore type.
  • Main body ball valves shape type: Lateral 3 Direction.
  • The Body and body cap are Stainless steel SCS13A.
  • Stem material: Stainless steel SUS304.
  • Ball material: Stainless steel SUS304/SCS13A.
  • Ball seal/ Gasket material: Hypatite PTFE/ PTFE
  • Handle Shape: Lever
  type.
  • Handle material: Ductile iron FCD400.
  • Applicable Fluid: Water.
  • End Flange connection: JIS B2220 (10K) standards.
  • Normal Operating Pressure: 10K.
  

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Stainless Steel Valve - CSH-BS High Ground Butt Weld Ball Valve

  CONSUSS

  Three-piece body, full port structure, butt weld type.
  [Features]
  ·Standard locking handle ensures safety
  ·Connection shape can be changed by replacing the end cap (Different shape only for NW type)
  ·Because of the bolt tightening structure, it can be easily disassembled and cleaned while piping is installed.
  ·Due to its lightweight and compact design, it is easy to remove during pipe maintenance.
  ·The gland part has a double structure of O-ring and gland packing, so it has good sealing performance.
  ·The gland part has a special structure, and the actuator can be assembled without a yoke.
  ·Main body material: Stainless steel 316. Seat material: PTFE

  Days to Ship:	10 Day(s) or more

• 

  Stainless Steel Valve CSJ 10K Flange Ball Valve

  CONSUSS

  [Features]
  · The full-port design reduces pressure loss.
  · An SUS handle is provided as an option for the standard FC handle.
  · The key position can be locked at either "Full-Open" or "Full-Close."
  · The dimensions between surfaces conform to ASME B 16.10 JIS B 2002.
  · Equipped with an anti static function.
  · Includes hole for preventing abnormal pressure rise.
  · With handle securing function.
  · Both JIS20K and ANSI150lb flanges can be fabricated.
  · Sizes above 150 A are also available.

  Days to Ship:	12 Day(s) or more

• 

  Ball Valve Full-Bore Economy Type (CSZ)

  CONSUSS

  An affordable type of full-bore ball valve that does not regulate the flow rate. Very hygienic, as the entire parti is made of stainless steel.
  
  [Features] - Two-piece body, full-port design.
  - Main body is made of 304 stainless steel, while the sheet is made of PTFE.
  - Available in four sizes: 10A, 15A, 20A, and 25A.
  - Ideal for liquid and gas. Flange fittings are recommended.

  Days to Ship:	10 Day(s) or more

• 

  Stainless Steel General-Purpose Type 1000 Screw-in Ball Valve

  KITZ

  KITZ, Ball Valve, Stainless Steel, for General Purpose, 1000 Type Screw-in Ball Valve

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  Stainless Steel General-Purpose Type 800 Screw-in Ball Valve

  KITZ

  KITZ, Ball Valve, Stainless Steel, for General Purpose, 800 Type Screw-in Ball Valve

  Days to Ship:	14 Day(s) or more

• 

  Ductile Iron 10K Ball Valve with Electric Actuator

  KITZ

  • EXH100-10STBF/EXH200-10STBF Series Ductile Iron Ball Valve with Electric Actuator
  • Kitz product code: EXH100-10STB and EXH200-10STB.
  • Main body ball valves shape: straight type.
  • EXH100-10STB/EXH200-10STB are Full bore type.
  • The Body and Body cap material: Ductile Iron FCD-S
  • Ball material: Stainless steel SCS13A, SUS304, SUS304TP.
  • EXH100-10STB/EXH200-10STB Ball Seal material is Hypatite PTFE.
  • Stem material: Stainless steel SUS403.
  • Supply & Control Thread ends connection: JIS B2239 (10K) standards.
  • Applicable Fluid : Water.
  • Electric Actuator Applicable Voltage: AC100V and AC200V.
  • Normal Operating Pressure: 10K.
  

  CAD ：

  2D

  Days to Ship:	25 Day(s) or more

• 

  Electric Ball Valve Motor Valve MSB Series

  CKD

  Water hammering is eliminated using a unique ball opening and closing mechanism. High sealing properties with no burnout when motor locking occurs.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Electric Ball Valve Motor Valve MXB/MXG Series

  CKD

  Water hammering is eliminated using a unique ball opening/closing mechanism. Superior sealing properties with no burnout if the motor locks.

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  Mechanical Fitting Ball Valve for Stainless Steel Piping

  HITACHI KINZOKU

  A mechanical tube fitting developed for stainless steel pipes. Highly reliable, it takes advantage of stainless steel's strength and light weight to provide superb corrosion and heat resistance.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Brass Ball Valve; Full Bore HBS Series Lever Handle Type

  HAMAI

  A forged brass product with hot-forged brass rods; the main body is robust and does not leak. Provides maximum flow rate with little fluid resistance.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Brass Ball Valve; HBS Series Lever Handle Type Oil-Free Treated

  HAMAI

  Oil-free processed ball valves are valves that have undergone degreasing and cleaning, and are manufactured with dust-proofing in mind. These valves are widely used in the healthcare, oxygen production, food products, paint, high purity gas, semiconductors, and biotech-related industries.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  FF2 Type (Full-Bore) Ball Valve, Compact Full Bore, Green Lever Handle

  ONDASEISAKUSYO

  Compact type with short face-to-face dimension is now available for full-bore ball valves. The pressure resistance is also improved.
  [Features]
  · A compact design. Compared to the FF type (full ball), the face-to-face dimension is shorter, space saving piping is possible, and it is a good value.
  ・ Pressure resistance performance is increased. Maximum allowable working pressure is 4.2 MPa (600 psi) with thick wall design

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Ball Valves, Full-Bore, Oversized Ball Type, Green T-Handle, FF Type

  ONDASEISAKUSYO

  Full-bore designed to the same nominal diameter as the pipe. Optimal for use in large flow-rate pipelines.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Free Bore, M1, R Type, Rc Screw x Rc Screw

  ONDASEISAKUSYO

  Operation made easier via use of a long handle. Space-saving piping. Handle position and opening and closing direction can be adjusted depending on the customer's piping needs.
  
  [Features]
  · The grip is 15 mm longer than a standard (green) handle and it is easy to grasp, so opening and closing is easy.
  · The handle's opening and closing direction is counterclockwise, which is the opposite of a standard (green) handle (when shipped).
  · Piping space is reduced by about 1/2 of conventional types thanks to integration of a space-saving ball valve and fitting.
  · Handle position and direction of opening and closing can be freely adjusted depending on the customer's piping needs.
  · Refer to the following handle position changing procedure for changing the handle position.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Free Ball, M2 Type, Rc Screw x R Screw

  ONDASEISAKUSYO

  [Features]
  ・ The standard handle (green) is compact and convenient for opening and closing in tight spaces. It can be closed by turning the handle clockwise when shipped.
  ・ By integrating space saving ball valve and fitting, the piping space can be reduced to 1/2 of the conventional type.
  ・ Handle position and opening/closing direction can be freely changed depending on piping
  [Applications]
  ・ Pneumatic equipment such as compressors
  ・ Machine tools and equipment
  ・ Copper pipe distribution equipment
  ・ Small pump accessory
  ・ Ships, agricultural equipment
  ・ Instrumentation equipment
  ・ Other industrial machine and equipment

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Free Ball (Angle), ML2 Type, R Screw × Rc Screw

  ONDASEISAKUSYO

  [Features]
  ・ The standard handle (green) is compact and convenient for opening and closing in tight spaces. It can be closed by turning the handle clockwise when shipped.
  ・ By integrating space saving ball valve and fitting, the piping space can be reduced to 1/2 of the conventional type.
  ・ Handle position and opening/closing direction can be freely changed depending on piping
  [Applications]
  ・ Pneumatic equipment such as compressors
  ・ Machine tools and equipment
  ・ Copper pipe distribution equipment
  ・ Small pump accessory
  ・ Ships, agricultural equipment
  ・ Instrumentation equipment
  ・ Other industrial machine and equipment

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  MR Type (Miniature) Ball Valve MR1 R Screw × R Screw

  ONDASEISAKUSYO

  Applicable fluids: Suitable for piping cold water / antifreeze / oil / air.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  MR Type (Miniature) Ball Valve, MR2 Type, Rc Screw × R Screw

  ONDASEISAKUSYO

  Ball valve MR type (miniature) ball valve MR2 type tapered female thread × tapered male thread made by ONDA MFG.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Stainless Steel Ball Valve, SBFF2 Type, Lever Handle, Full-Bore (SCS13A)

  ONDASEISAKUSYO

  Excellent corrosion resistance. Stable quality is provided by lost-wax casting. Usable for a wide range of applications: housing, water treatment, water supply and sewerage systems, food industry, chemical industrial machinery, pollution control equipment, and semiconductor manufacturing facilities.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Ball-Type Electric Valve for Liquid, Air, Gas, BM-7S Type

  VENN

  A Class 1 electrically operated on-off valve that exploits the excellent characteristics of the ball valve. A simplified structure with ample rotation torque.
  
  [Features]
  · Compact and lightweight.
  · High operational capacity.
  · The valve open/close state can be checked externally.
  · The valve can be opened and closed manually.
  · The flow direction and mounting direction are freely adjustable.
  · Valve open/close signals can be output.
  · Includes a built-in thermal protector (nominal diameter: ≤ 32 mm).
  · Rainproof type for outdoor use.

  Days to Ship:	12 Day(s) or more

• 

  Stainless Steel 3.92 MPa Full-Bore Type, Ball Valve

  FUJIKIN

  [Features]
  ・ Lightweight and compact, saves piping space
  ・ It can be fully opened and closed by opening and closing at 90°, and is suitable as an ON-OFF valve
  ・ The valve body has a stainless steel precision casting finish
  ・ There is a full-bore type

  Days to Ship:	12 Day(s) or more

• 

  Stainless Steel 3.92 MPa Butterfly Handle Type, Full-Bore Type Ball Valve

  FUJIKIN

  [Features]
  ・ Lightweight and compact, saves piping space
  ・ It can be fully opened and closed by opening and closing at 90°, and is suitable as an ON-OFF valve
  ・ The valve body has a stainless steel precision casting finish
  ・ There is a butterfly handle type that has a small handle space and is easy to install and operate even in tight spaces

  Days to Ship:	12 Day(s) or more

• 

  Stainless Steel Valve - CSH-PS High Ground Threaded Ball Valve

  CONSUSS

  Three-piece body, full-port construction, high-grand threaded ball valve.
  [Features]
  ·A standard lock handle ensures safety.
  ·The connection shape can be changed by exchanging the end cap.
  ·Due to its lightweight and compact design, it is easy to remove during piping maintenance.
  ·The gland part has a double structure of O-ring and gland packing, so it has good sealing performance.
  ·The ground has a special structure, and the actuator can be assembled without a yoke.
  ·Body material is stainless steel 316. The seat material is PTFE. Connect by screwing.
  [Applications]
  ·Ideal for use in piping requiring frequent maintenance such as disassembly and cleaning.

  Days to Ship:	10 Day(s) or more

• 

  Threaded Ball Valve (800 Type/Stainless Steel) 316SFVM

  INOC

  ● Full-bore, lever handle type.
  ● For water, oil, and gas.

  Days to Ship:	12 Day(s) or more

Loading...