Safety Valves, Control Valves（Control Side Plumbing Pipe Thread Nominal：1/2B）

• 

  Safety Valve, Relief Valve AL-140 Series

  YOSHITAKE

  [Features]
  ・ It is made entirely of stainless steel, SCS14A (equivalent to SUS316) with excellent corrosion resistance is used for the main part
  ・ The sealed structure prevents fluid from leaking to the outside

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve (For Cold and Hot Water) GD-24GS/GD-24GS-N Series

  YOSHITAKE

  A hanging metal type. A pressure reducing valve without sliding parts. Requires maintenance of consumable parts only.

  Days to Ship:	28 Day(s) or more

• 

  Pressure Reducing Valve for Steam, Gas and Liquid, RD-3H Series

  VENN

  [Features]
  · Pilot type direct-acting, pressure-reducing valve that is used in non-controllable, small flow-rate locations. It has good pressure-control with excellent wide pressure range adjustment characteristics. The main parts are made from SUS (for steam).
  · Note: These valves differ for use with stream, air, vapor, and liquid.

  Days to Ship:	10 Day(s) or more

• 

  Air Vent, 11-AV Series

  YOSHITAKE

  Operates at a greater output across a wide range of pressures. The free-floating lever is less prone to wearing. The valve body and valve seat are made of highly durable hardened chrome steel.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Safety Valve, Relief Valve AL-150 Series

  YOSHITAKE

  [Features]
  ・ It is a versatile type that supports fluids such as steam, air, water, and oil
  ・ The pressure division was subdivided, and ultra-precise finishing by advanced technology was realized to pursue the best performance
  ・ Main parts (valve body, valve seat) and adjustment spring are made of stainless steel, and SCS14A (equivalent to SUS316) with excellent corrosion resistance is used for main parts
  ・ The sealed structure prevents fluid from leaking to the outside

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-17 Series

  YOSHITAKE

  [Features]
  ・ The main part (valve body, valve seat) is made of stainless steel, so it has excellent corrosion resistance and durability
  ・ The down pressure can be adjusted by seat ring
  ・ It can support set pressures up to 1.6 MPa

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve (Steam) GD-30 Series

  YOSHITAKE

  This small, lightweight, direct-acting pressure-reducing valve incorporates a stainless steel valve body and valve seat, uses an external-pressure bellows in its detection component, and has excellent durability.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Relief Valve, AL-250 Series

  YOSHITAKE

  [Features]
  ・ Since it is entirely made of stainless steel, it has excellent corrosion resistance and durability
  ・ By adopting a dashpot structure, it has a great effect on lines with large pulsations and pressure fluctuations. Chattering and hunting are reduced
  ・ It has stable operation against back pressure changes during continuous blowing

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-140T Series

  YOSHITAKE

  [Features]
  ・ Since it is entirely made of stainless steel, it has excellent corrosion resistance and durability
  ・ A soft seat is used for the main part, and it has excellent airtightness in the valve seat
  ・ It is ideal for applications where valve seat leakage cannot be tolerated
  ・ The sealed structure prevents fluid from leaking to the outside

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves for Hot and Cold Water, GD-26-NE Series

  YOSHITAKE

  Corrosion-resistant materials are used in the liquid-contacting parts. Superior chlorine resistance and reliability for running cold and hot water. The valve utilizes pressure-balanced structure. Therefore, secondary side pressure is maintained at a fixed level without affecting the primary side pressure.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  RD-43N, Pressure Reducing Valve for Door-to-Door (for Water / Hot Water), Benkei

  VENN

  A pressure-reducing valve for use in small-capacity, door-to-door water and hot water supply pipes installed inside studio apartments, etc.
  · For larger capacity and general complex housing, use types RD-44N, 47N, etc.
  
  [Features]
  · Utilizes chlorine water-resistant EPDM.
  · Sanitary design that prevents pooling of liquids.
  · Reliable construction from low-to-high differential pressure.
  · These are non-disassembly type pressure-reducing valves for safe and secure construction.
  · Post-construction hydraulic testing can be performed with the reducing valve installed.
  · Utilizes a new, simple test gag method.

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves (Steam), GD-30S Series

  YOSHITAKE

  Optimal for applications such as food processing machinery and medical equipment, due to wetted parts made of stainless steel.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Relief Valve, AL-260 Series

  YOSHITAKE

  [Features]
  ・ Main parts are made of stainless steel, and all wetted parts are made of corrosion resistant material
  ・ By adopting a dashpot structure, it has a great effect on lines with large pulsations and pressure fluctuations
  ・ Chattering and hunting are reduced
  ・ It has stable operation against back pressure changes during continuous blowing

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150L Series

  YOSHITAKE

  [Features]
  · The main parts (valve body and seat) and adjustment springs are made of stainless steel; in particular, the main parts use SCS14A (equivalent to SUS316) which has excellent corrosion resistance.
  · With lift valve lever types, discharge inspections can be performed manually at a pressure that is 75% or more of the discharge pressure.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150TML Series

  YOSHITAKE

  Uses a lift valve lever mechanism for manually performing blowout inspections. The valve body/valve seat and adjustment spring are made from stainless steel. Anti-corrosive SCS14A is used in the main parts.

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150T-N Series

  YOSHITAKE

  With soft sheeting used in main parts, this valve is optimal for applications that do not permit leakage from the valve seat. The valve/valve seat and adjustment spring are made of stainless steel, with anti-corrosive SCS14A being used in the main section.

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150TR Series

  YOSHITAKE

  A handle-operated valve for changing the pressure easily. Usable as a relief valve.
  
  [Features]
  · The AL-150 is a handle-operated valve for changing the pressure easily. Therefore, this valve can be used as a relief valve.
  · Soft seats are utilized in the main parts for a superior valve seat airtight performance.
  · Optimal for applications in which valve seat leaks are unacceptable.
  · The main parts (valve body and seat) and adjustment springs are manufactured from SCS14 stainless steel (SUS316 EQUIV) with excellent anti-corrosive properties.
  · The sealed construction prevents fluid from leaking outside.

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150T Series

  YOSHITAKE

  [Features]
  · Soft seats are utilized in the main parts for a superior valve seat airtight performance. Optimal for applications in which valve seat leaks are unacceptable.
  · The main parts: valve body, seat. and adjustment springs are made from stainless steel. Anti-corrosive SCS14A is used for the main parts.
  · The sealed construction prevents liquid from leaking outside.

  Days to Ship:	12 Day(s) or more

• 

  Relief Valve AL-52F-95 Series for Hot water Equipment

  YOSHITAKE

  Attached to the piping system of a hot water heat exchanger, when there is a rise in pressure in the system due to the expansion of the water or pressure rise due to the abnormality, it will be used for the purpose of ensuring the safety of the equipment.
  
  [Features]
  ▪ A diaphragm with a large effective pressure area is used in the pressure receiver, so the spouting amount during initial operations is considerable, and spouting at start and end pressure is stable.
  · The water contact part and mechanical part are separated by a diaphragm and are therefore hygienic.
  · A manual lever is attached, so actuation, level check and drainage from the whole system are easily performed.
  · The diaphragm has superior durability as it is made from heat resistant and water resistant synthetic rubber.
  ▪ The AL-72F relief valve uses parallel screws in the exit connection that makes piping easy with the cap nut.
  ▪ The AL-52S relief valve has superior corrosion resistance properties because its valve seat is made from stainless steel. This makes it suitable for use in electric water heaters.

  Days to Ship:	16 Day(s) or more

• 

  Relief Valve AL-52FS-95 Series for Hot Water Equipment

  YOSHITAKE

  It's attached to the piping system of the hot water heat exchanger. It will be used for the purpose of ensuring the safety of the equipment if there is a rise in the system due to the expansion of the water or a rising pressure.

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves (Steam), GD-6N Series

  YOSHITAKE

  Small, and lightweight, with constant secondary pressure accuracy even at small capacities. · The valve body and valve seat have superior durability thanks to the use of stainless steel.
  
  [Features]
  Constant secondary pressure accuracy does not change even at small capacities.
  · Compact and lightweight.
  · The valve body and valve seat have superior durability thanks to the use of stainless steel.
  · A screen (60 mesh) is built in to protect the valve body and seat from foreign material, pipe scales, and pipe chips.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves for Hot and Cold Water / Oil/Air, GD-6 Series

  YOSHITAKE

  Small, and lightweight, with constant secondary pressure accuracy even at small capacities.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves for Hot and Cold Water, GD-28-NE Series

  YOSHITAKE

  Corrosion-resistant materials are used in the liquid-contacting parts. Superior chlorine resistance against running cold and hot water. The top section can be disassembled unidirectionally, allowing for internal inspection.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves (Hot and Cold water), GD-41 Series

  YOSHITAKE

  Saves space and resources. Stainless steel is used for fluid-contacting parts, fluoropolymer for fluid-contacting surfaces, and special fluorine rubber for rubber parts to provide superior corrosion resistance and durability.

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve for Door-to-Door Water Supply for Condominiums, for Use in Residential Complexes, GD-15 / GD-15C Series

  YOSHITAKE

  This product enables a quiet water supply, so it can be used as a pressure reducing valve for individual water supply in apartment buildings, etc. Can hold a very stable secondary side pressure on the water supply side pressure fluctuation. Small and light with a built in strainer.
  
  [Features]
  • Because the noise of the pressure reduction valve itself has been eliminated, water can be supplied even late at night without issue.
  • Because the supplied water pressure has already been adjusted to a standard set pressure, there is no need for on-site pressure adjustment.
  • The pressure-balancing valve structure ensures that the pressure on the secondary side is kept constant without being affected by the pressure on primary side.
  • Thanks to a built-in strainer, any intermixed trash, sand, etc. is removed, preventing it from getting stuck in the valve area or flowing out to the secondary side.
  • The strainer cap can be removed without using tools. Also, because the strainer and the strainer cap are combined into a single unit, it is easy to perform maintenance inspections inside the valve box without leaving the strainer in.
  • Thanks to its tightly closed structure, no fluids will escape to the exterior even if the diaphragm is damaged.
  • Piping can be mounted in whatever direction you like (horizontally or vertically).

  Days to Ship:	16 Day(s) or more

• 

  Air Vent TV-2 Series for Vapor

  YOSHITAKE

  [Features]
  ▪ It prevents air from entering the Weber system. Under any type of pressure from light vacuum state to maximum operating pressure, the air is evacuated automatically under a slightly lower temperature than saturated vapor temperature.
  ▪ Due to the adoption of a hemispherical stainless steel valve, it is protected by using a seal with high protective properties.
  ▪ Due to its compact shape and light weight, it is easy to install.
  ▪ It has been proven to work reliably under a temperature that is slightly lower than the saturated vapor temperature of the operating pressure range.

  Days to Ship:	12 Day(s) or more

• 

  Lift Type Safety Valve AL-24/AL-24F Series

  YOSHITAKE

  [Features]
  ・ It uses a bronze valve box with a stainless steel valve seat so there is no risk of rust
  ・ Since it is a diaphragm type and has no sliding parts, it operates reliably
  ・ The set pressure range is as wide as 0.1 to 0.7 MPa with 1 spring, the adjusting thread is a handle type, and a butterfly nut is used for the lock nut, so the pressure can be easily changed
  ・ Smooth opening and closing even in continuous operation, it operates accurately with respect to the set pressure and discharges liquid
  ・ Stable operation can be obtained from small flow rate to large flow rate
  ・ According to the specifications, you can choose the material of the diaphragm and valve body from 2 types, NBR and FKM (fluoroelastomer)
  ・ It can be installed vertically, horizontally, top, or bottom

  Days to Ship:	12 Day(s) or more

• 

  RP-7, Pressure-Reducing Valve (for Steam) Benten

  VENN

  For steam cleaning of food equipment, disinfection equipment, cleaning equipment, etc.
  
  [Features]
  · Compact pilot-operated pressure-reducing valve used in equipment and devices with a relatively low flow rate.
  · Compact and lightweight (up to 50%, compared to other in-house products); device integration is supported.
  · Adoption of a piston guide structure and special seal ring makes control stable from lower flow rates to the maximum rated flow rate.
  · Manual handle control with auto locking mechanism makes pressure adjustment easy.
  · Compact design.

  Days to Ship:	12 Day(s) or more

• 

  RD-40, 41 Type Pressure-Reducing Valve (for Steam) Mini-Benten

  VENN

  For use in food machinery, medical equipment, laundry equipment, and other steam-based machinery
  
  [Features]
  - A direct-acting, pressure-reducing valve that is ideal for precise control of steam pressure for various equipment.
  - Compact and lightweight; optimum for integration into devices.
  - Optimal for items that need to be free of rust, such as food, kitchen equipment, medical equipment, laundry machines, and air conditioners (humidifiers).
  - Stainless steel body suitable for higher-grade vapor lines.
  - Provides large flow rates (heat) required when starting up equipment.
  - Main body is made of bronze or stainless steel; main parts are made of stainless steel for clean vapor.
  - Secondary side pressure can be smoothly adjusted with the manual handle on the automatic lock mechanism.
  - Uses SUS316L bellows and a built-in strainer for high reliability.

  Days to Ship:	12 Day(s) or more

• 

  RD-30 Type Pressure-Reducing Valve (for Vapor)

  VENN

  Direct acting type general-purpose products (small and medium capacity) such as construction equipment, factory equipment, etc.
  
  [Features]
  ▪ Performs stable operation from the small flow rates that cannot be controlled by pilot-operated products.
  ▪ Structure is little affected by dirt particles, and maintenance is easy.
  ▪ With use of special synthetic rubber diaphragms in multi-purpose direct-acting pressure reducing valve for pipeline and various steam equipment, it can support a wide range of applications.

  Days to Ship:	12 Day(s) or more

• 

  RD-31N, 32N Type Pressure Reducing Valve, Heisei

  VENN

  Direct-acting general-purpose products (made of bronze, medium capacity) for use in construction equipment, factory equipment, etc.
  
  [Features]
  - Serves as a bronze water-pressure reducing valve meeting rust-water prevention needs.
  - We combine our pressure-reduction technology with high controllability, reliability and user-friendliness, eliminating rust generation from pipe joints and across the flow path.
  - Heisei provides reliable countermeasures for rusty water, used in building facilities, house facilities, plant facilities, boiler water supply, etc.
  - Measures to prevent rusty water in normal state: Bronze body + pipe-end core to prevent rusty water.
  - Low-noise design.
  - Water does not leak outside if the diaphragm is damaged.
  - Built-in strainer.
  - (Nominal diameter of 50 or less 40 mesh equivalent) Smaller approximately 50% later than FC-made conventional parts.

  Days to Ship:	12 Day(s) or more

• 

  FD-6N, Fixed Flow Rate Valve (for Individual Resident Water Supply/Hot Water Supply), Benkei

  VENN

  In addition to mainly being used in central hot water supply systems for housing complexes, high-rises, and the like, this fixed flow rate valve is also used in water supplying systems. This adjustable valve automatically restricts flow rates so that flow rate is fixed in response to fluctuations in primary side pressure.
  
  [Features]
  • By using this fixed flow rate valve, it becomes possible to appropriately distribute supplied water and hot water volumes to each residence.
  • As a result, system design and construction work are simplified, energy and water are saved, and water hammer is reduced.
  • Mounting position can be changed to any orientation.
  • Wide working differential pressure range.
  • The simple structure takes advantage of rubber elasticity to maintain a stable flow rate.

  Days to Ship:	12 Day(s) or more

• 

  SL-35N/35HN Type, Relief Valve for Hot Water Equipment

  VENN

  Diaphragm type relief valve for small hot water boilers and electric water heaters. Used as a relief valve for pressure caused by thermal expansion and on the secondary side of pressure reducing valve.

  Days to Ship:	13 Day(s) or more

• 

  Pressure Reducing Valve for Water, Liquid, Air, Gas, RD-20, 20N Series, [Heisei]

  VENN

  [Features]
  · A stainless steel, small-size pressure reducing valve that can be used for both liquid and gas supply pipes—especially in rust-intolerant places where bronze cannot be used. In addition, it can be used for stainless steel piping in door-to-door water supply systems.
  · Stainless steel and synthetic rubber are used for the liquid-contacting parts and spring casings for excellent corrosion resistance.
  · The carefully designed flow channel, utilization of square spring, etc., provide a significant size and weight reduction.
  · Freely adaptable installation positon.
  · Easy to maintain.
  · Can be used for liquid and gas, with a primary side pressure of 2.0 MPa.

  Days to Ship:	12 Day(s) or more

• 

  TD-8, 8 A Type Temperature Control Valve

  VENN

  [Features]
  It is a general purpose flange temperature regulating valve, so it is used for temperature regulation in hot water tanks, heat exchangers, heavy fuel heating apparatus, or used for cooling by passing water or refrigerants, or used at low temperatures when the surrounding atmospheric temperature is higher than the set temperature, or when the set temperature is 40°C or less.

  Days to Ship:	12 Day(s) or more

• 

  TR-4N Type Mixing Valve

  VENN

  [Features]
  • The TR-4 N mixing valve is a temperature regulating valve that is able to control the temperature of hot-water supply by simply connecting the hot water and water.
  • As well as ensuring a temperature-stable supply, it also guarantees safety as both the cold and hot water have built-in check valves.
  • A lightweight and compact design that improves workability and saves on space.
  • Complies to the performance standards of the Water Supply Act of Japan, allowing for peace of mind when used with water supply systems.
  • The thermo-element is able to track pressure fluctuations in the hot and cold water, ensuring temperature-stable hot water supply.
  • Inspection of internal components, including the thermo-element, is possible, making it easy to maintain.
  • The inlet end of the union joint (hot-water/water) features both a built-in check valve and net.

  Days to Ship:	12 Day(s) or more

• 

  AF-5N Air Vent Valve

  VENN

  A bronze air vent valve for use with high-pressure liquids that has a built-in filter (muffler) to dampen the sound of high pressure air discharge.

  Days to Ship:	12 Day(s) or more

• 

  Bimetallic Disc Temperature Control Trap TB9N Type

  MIYAWAKI

  [Features]
  ・ SCCV (Self Closing and Centering Valve) mechanism (): The valve is spherical and is not fixed to the shaft, but is designed to be held with some play left, right, front and back. Since the design structure holds the valve with play, even if the shaft slightly tilts due to the effect, etc., of condensed water when the valve is closed, the valve itself can flexibly close toward the center of the valve hole
  ・ QC (Quick-Close mechanism) mechanism (): When condensate flows from the inside of the trap body to the valve hole, the valve pushed down by the expansion force of the bimetal plate gradually closes the flow passage hole provided in the guide that shuts off the inside of the body and the valve hole. The valve gradually closes the flow passage hole, weakening the flow rate of the condensate passing through the valve opening, heats the bimetal more quickly, and promotes valve closing
  ・ Also available with convenient blow valve: There is also a type with a blow valve that removes scale and pipe dust that flows into and accumulates in the trap to the outside without disassembling the trap
  ・ If you would like to have a blow valve, please specify TB9BN-C or TB9BN-R
  ・ TB9BN-C can be used up to 0.98 MPa, and cock operation is easy
  ・ TB9BN-R can be used up to 1.6 MPa
  [Applications]
  ・ Ideal for steam tracing, steam transport pipes, tank heating, heating, etc.

  Days to Ship:	14 Day(s) or more

• 

  Bimetallic Disc Temperature Control Trap TB7N Type

  MIYAWAKI

  [Features]
  ・ Adopts SCCV mechanism and QC mechanism
  ・ The SCCV (self-controlled seated valve) mechanism has an excellent sealing performance because the valve is free in the holder and is softly drawn to the center axis of the valve seat when the valve is closed
  ・ Achieve faster start-up
  ・ Quickly discharges low-temperature condensate and air at the beginning of ventilation
  ・ Also functions as an air vent
  [Applications]
  ・ Steam transport pipe, trace line, etc.

  Days to Ship:	22 Day(s) or more

• 

  Air Vent for Steam - AT9N Type

  MIYAWAKI

  It is an air vent for steam. [Features]·Will shorten equipment startup time as a result of quick air displacement.

  Days to Ship:	22 Day(s) or more

• 

  Air Vent for Steam - AW2 Type

  MIYAWAKI

  [Features]
  ·Rapid air evacuation shortens equipment start-up time.
  [Applications]
  ·It can be used for steam piping and various devices.

  Days to Ship:	22 Day(s) or more

• 

  Direct Acting Steam Pressure Reducing Valve - RE1 Type

  MIYAWAKI

  [Features]
  ・ Ultra compact and lightweight design, about half the size and weight of conventional products
  ・ Reliable operation, effective in saving energy and improving productivity
  ・ Increased rated flow rate by devising original orifice plate
  ・ The control bellows by original device has excellent durability
  ・ The handle is made of special plastic, easy to grip and shape with excellent heat dissipation
  ・ Sharp and simple design. Plus forged body is perfect for beautiful styling
  ・ Improved gaskets make maintenance easier
  ・ One of the attractions of this performance is that it is inexpensive
  [Applications]
  ・ Cleaning / apparel industry
  ・ Food industry / dyeing industry
  ・ Ideal for heating equipment, sterilizers, rubber vulcanizers, etc.

  Days to Ship:	16 Day(s) or more

• 

  Direct Acting Steam Pressure Reducing Valve - REC1 Type

  MIYAWAKI

  [Features]
  ·It is made entirely of stainless steel and has excellent corrosion resistance.
  ·Maximum decompression ratio 30:1.
  ·Compact and lightweight design allows installation in narrow spaces.
  ·The pressure can be easily adjusted by operating the handle without using any tools.
  [Applications]
  ·food equipment.
  ·Medical equipment.
  ·Small processes such as bio-related equipment.

  Days to Ship:	22 Day(s) or more

• 

  Micro Bellows Pilot Operation Steam Pressure Reducing Valve - RE3 Type

  MIYAWAKI

  [Features]
  ·It is a plus forged product, and is ultra-compact (approximately 50% lower in overall height) and lighter (approximately 60% lighter in weight) than conventional pressure reducing valves for steam, requiring less installation space.
  ·It can be easily adjusted by simply operating the handle (with lock mechanism).
  ·The unique stainless steel micro bellows and high-precision pilot valve have been developed to ensure reliable control.
  ·Its unique stainless steel micro bellows and overstress prevention mechanism (patent pending) provide outstanding durability.
  ·The amount of heat dissipated is reduced, making it excellent in energy saving and economic efficiency.
  ·A fluororesin (PTFE) gasket is used for the main parts, so it has good sealing performance, and it is easy to disassemble, assemble, and replace parts with commercially available tools.
  [Applications]
  ·Food industry, dyeing industry, cleaning industry, apparel industry, heating equipment, air conditioning equipment, etc.

  Days to Ship:	22 Day(s) or more

• 

  Fixed Capacity Valve EA469BR-62

  ESCO

  It is a one-way flow from the male thread side to the female thread side. [Materials]·Brass.

  Days to Ship:	17 Day(s) or more

Loading...