Safety Valves, Control Valves（Supply Side, Plumbing Thread Nominal：1B）

• 

  Safety Valve, Relief Valve AL-140 Series

  YOSHITAKE

  [Features]
  ・ It is made entirely of stainless steel, SCS14A (equivalent to SUS316) with excellent corrosion resistance is used for the main part
  ・ The sealed structure prevents fluid from leaking to the outside

  Days to Ship:	12 Day(s) or more

• 

  Air Vent Valve, TA-3/TA-6 Series

  YOSHITAKE

  Operates at a wide range of pressures, allowing use from low to high pressures. The valve seat uses a synthetic rubber disk, preventing leakage from the valve, but as a precautionary measure a screw has been added to mount the copper tube fitting onto the top part of the valve seat.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve for Steam, Gas and Liquid, RD-3H Series

  VENN

  [Features]
  · Pilot type direct-acting, pressure-reducing valve that is used in non-controllable, small flow-rate locations. It has good pressure-control with excellent wide pressure range adjustment characteristics. The main parts are made from SUS (for steam).
  · Note: These valves differ for use with stream, air, vapor, and liquid.

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve (For Cold and Hot Water) GD-24GS/GD-24GS-N Series

  YOSHITAKE

  A hanging metal type. A pressure reducing valve without sliding parts. Requires maintenance of consumable parts only.

  Days to Ship:	12 Day(s) or more

• 

  FM Valve Type 1

  FMVALVE

  A valve that can be used in combination with electromagnetic valves and mechanical control valves.
  
  [Features]
  · This valve can be electrically controlled by combined use with electromagnetic valves. Therefore, it enables simple timed water rationing, and varying of supply start-stop intervals. In addition, it facilitates construction of effective water supply systems by combined use with sensors, etc., to match the usage conditions.
  · This valve has simple structure. Therefore, it is easy to install and maintain.
  · This valve has no flow adjustment mechanism. Therefore, the flow rate cannot be adjusted.

  Days to Ship:	17 Day(s) or more

• 

  Safety Valve, Relief Valve AL-150 Series

  YOSHITAKE

  [Features]
  ・ It is a versatile type that supports fluids such as steam, air, water, and oil
  ・ The pressure division was subdivided, and ultra-precise finishing by advanced technology was realized to pursue the best performance
  ・ Main parts (valve body, valve seat) and adjustment spring are made of stainless steel, and SCS14A (equivalent to SUS316) with excellent corrosion resistance is used for main parts
  ・ The sealed structure prevents fluid from leaking to the outside

  Days to Ship:	11 Day(s) or more

• 

  Safety Relief Valve, AL-17 Series

  YOSHITAKE

  [Features]
  ・ The main part (valve body, valve seat) is made of stainless steel, so it has excellent corrosion resistance and durability
  ・ The down pressure can be adjusted by seat ring
  ・ It can support set pressures up to 1.6 MPa

  Days to Ship:	12 Day(s) or more

• 

  Air Vent Valve TA-16 Series

  YOSHITAKE

  Provides a stable displacement across a wide range of operating pressures (0.01–1.0 MPa). Its compact size enables mounting in a narrow space.
  
  [Features]
  • All parts are made of stainless steel, except for the valve body disk, gasket, and L-hose fitting (TA-16L), which ensures excellent corrosion resistance and durability.
  • The valve body disk is made of fluororubber, which ensures excellent sealing performance.
  • The TA-16 can easily be connected to an exhaust pipe by mounting the optional pipe connectors.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Pressure Reducing Valve (Steam) GD-30 Series

  YOSHITAKE

  This small, lightweight, direct-acting pressure-reducing valve incorporates a stainless steel valve body and valve seat, uses an external-pressure bellows in its detection component, and has excellent durability.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  AF-4 Series Air Vent Valve

  VENN

  The equipment is used in building facilities and factory facilities, etc. It is an air vent valve for fluids. It automatically discharges the air that accumulates in the pipes and the air inside an airtight tank and makes the fluid flow smoothly.
  
  [Features]
  ▪ Due to the improved airtightness, it has adopted the swing valve body.
  ▪ The amount of air discharged from the equipment is comparatively large.
  ▪ It has a simple structure that allows easy handling.
  · AF-4CN is a rust-resistant nylon-coated product.

  Days to Ship:	12 Day(s) or more

• 

  Relief Valve, AL-250 Series

  YOSHITAKE

  [Features]
  ・ Since it is entirely made of stainless steel, it has excellent corrosion resistance and durability
  ・ By adopting a dashpot structure, it has a great effect on lines with large pulsations and pressure fluctuations. Chattering and hunting are reduced
  ・ It has stable operation against back pressure changes during continuous blowing

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-140T Series

  YOSHITAKE

  [Features]
  ・ Since it is entirely made of stainless steel, it has excellent corrosion resistance and durability
  ・ A soft seat is used for the main part, and it has excellent airtightness in the valve seat
  ・ It is ideal for applications where valve seat leakage cannot be tolerated
  ・ The sealed structure prevents fluid from leaking to the outside

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves for Hot and Cold Water, GD-26-NE Series

  YOSHITAKE

  Corrosion-resistant materials are used in the liquid-contacting parts. Superior chlorine resistance and reliability for running cold and hot water. The valve utilizes pressure-balanced structure. Therefore, secondary side pressure is maintained at a fixed level without affecting the primary side pressure.

  CAD ：

  2D

  Days to Ship:	19 Day(s) or more

• 

  VD-1H Type Vacuum Adjustment Valve

  VENN

  [Features]
  ▪ It prevents the suction of the air in a valve when it opens due to the decrease in set pressure and it also prevents the creation of vacuums in pipes and equipment.
  ▪ Using a silencer when the vapor pipe is attached prevents suction of water into the pipe when vapor stops generating.

  Days to Ship:	22 Day(s) or more

• 

  FM Valve Type 3L

  FMVALVE

  [Features]
  ·The auxiliary valve (ball tap) piping can be connected directly to the main unit, so repairs can be performed without removing the auxiliary valve piping.
  ·When used in conjunction with a solenoid valve, it can be electrically controlled, so it is easy to change the timed water supply, water supply stop, and water supply start intervals.
  ·A unique buffer mechanism prevents water hammer.
  ·Equipped with a flow rate adjustment mechanism, it is possible to adjust the amount of water flow.
  ·If the pump for the water tank is a pressurized water supply system, use an electrical control system.

  Days to Ship:	10 Day(s) or more

• 

  Ventilation Valve, TA-2 / TA-5 / TA-5F Series

  YOSHITAKE

  [Features]
  · Includes a rapid air discharge mechanism so during initial water flow, air inside the pipe is rapidly discharged, simplifying water passage.
  · Operates at a wide range of pressures compared to conventional air purge valves, from low to high pressures.
  · In the event of damage to the float valve body or valve seat surface after prolonged use, parts can be replaced from outside, simplifying maintenance and inspections.
  · TA-5 5F includes a main body made of bronze so production of rusty water is not a concern.
  · Negative pressure in the piping or tank automatically produces rapid suction of air, protecting against damage to piping due to vacuum.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  AF-10 Series, Air Vent Valve

  VENN

  A stainless steel air relief valve with excellent corrosion resistance and durability, with a strainer built-in to the main body, and with air intake and exhaust functions.
  
  [Features]
  · Easy design installation possible with the built-in strainer.
  · Stainless steel with superior corrosion resistance and durability.
  · The discharge port can be freely rotated 360°, so installation is simple.
  · Equipped with a manual shut-down control.

  Days to Ship:	12 Day(s) or more

• 

  Nylon Coated Air Release Valve, TA-2C Series

  YOSHITAKE

  Equipped with a rapid exhaust mechanism to rapidly expel from air inside the pipe at the time of initial water throughput, thus easing water throughput.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Nylon Coated Air Release Valve, TA-3C Series

  YOSHITAKE

  Operates at a wide range of pressures, allowing use from low to high pressures. The valve seat uses a synthetic rubber disk, preventing leakage from the valve, but as a precautionary measure a screw has been added to mount the copper tube fitting onto the top part of the valve seat.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Relief Valve, AL-260 Series

  YOSHITAKE

  [Features]
  ・ Main parts are made of stainless steel, and all wetted parts are made of corrosion resistant material
  ・ By adopting a dashpot structure, it has a great effect on lines with large pulsations and pressure fluctuations
  ・ Chattering and hunting are reduced
  ・ It has stable operation against back pressure changes during continuous blowing

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150L Series

  YOSHITAKE

  [Features]
  · The main parts (valve body and seat) and adjustment springs are made of stainless steel; in particular, the main parts use SCS14A (equivalent to SUS316) which has excellent corrosion resistance.
  · With lift valve lever types, discharge inspections can be performed manually at a pressure that is 75% or more of the discharge pressure.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150TML Series

  YOSHITAKE

  Uses a lift valve lever mechanism for manually performing blowout inspections. The valve body/valve seat and adjustment spring are made from stainless steel. Anti-corrosive SCS14A is used in the main parts.

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150T-N Series

  YOSHITAKE

  With soft sheeting used in main parts, this valve is optimal for applications that do not permit leakage from the valve seat. The valve/valve seat and adjustment spring are made of stainless steel, with anti-corrosive SCS14A being used in the main section.

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150TR Series

  YOSHITAKE

  A handle-operated valve for changing the pressure easily. Usable as a relief valve.
  
  [Features]
  · The AL-150 is a handle-operated valve for changing the pressure easily. Therefore, this valve can be used as a relief valve.
  · Soft seats are utilized in the main parts for a superior valve seat airtight performance.
  · Optimal for applications in which valve seat leaks are unacceptable.
  · The main parts (valve body and seat) and adjustment springs are manufactured from SCS14 stainless steel (SUS316 EQUIV) with excellent anti-corrosive properties.
  · The sealed construction prevents fluid from leaking outside.

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150T Series

  YOSHITAKE

  [Features]
  · Soft seats are utilized in the main parts for a superior valve seat airtight performance. Optimal for applications in which valve seat leaks are unacceptable.
  · The main parts: valve body, seat. and adjustment springs are made from stainless steel. Anti-corrosive SCS14A is used for the main parts.
  · The sealed construction prevents liquid from leaking outside.

  Days to Ship:	12 Day(s) or more

• 

  Air Vent Valve TA-16CVA, Series

  YOSHITAKE

  Provides a stable displacement across a wide range of operating pressures (0.01–1.0 MPa). Compact design permits installation in small space. Included check valve prevents air being sucked in on inlet side, even at negative pressure.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Air Vent Valve, TA-16 CVS Series

  YOSHITAKE

  [Features]
  ・ All materials other than valve discs, gaskets, check valves, check valve fitting are made of stainless steel
  ・ Wide operating pressure (0.01 to 1.0 MPa) gives stable displacement
  ・ Compact size allows installation in a small space
  ・ Excellent sealing performance because synthetic rubber is used for the valve disc
  ・ TA-16CVS makes it easy to connect any exhaust pipe by installing optional pipe connection parts
  ・ Since it has a check valve, it does not suck air even when the inlet side is under negative pressure
  [Applications]
  ・ building equipment, factory equipment, housing complex

  CAD ：

  2D

  Days to Ship:	23 Day(s) or more

• 

  Air Vent Valve TA-16L Series

  YOSHITAKE

  [Features]
  ・ All materials other than valve discs, gaskets and L-shaped hose fittings (TA-16L) are made of stainless steel
  ・ Wide operating pressure (0.01 to 1.0 MPa) gives stable displacement
  ・ Compact size allows installation in a small space
  ・ Excellent sealing performance because synthetic rubber is used for the valve disc
  [Applications]
  ・ building equipment, factory equipment, housing complex

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves (Steam), GD-6N Series

  YOSHITAKE

  Small, and lightweight, with constant secondary pressure accuracy even at small capacities. · The valve body and valve seat have superior durability thanks to the use of stainless steel.
  
  [Features]
  Constant secondary pressure accuracy does not change even at small capacities.
  · Compact and lightweight.
  · The valve body and valve seat have superior durability thanks to the use of stainless steel.
  · A screen (60 mesh) is built in to protect the valve body and seat from foreign material, pipe scales, and pipe chips.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves for Hot and Cold Water / Oil/Air, GD-6 Series

  YOSHITAKE

  Small, and lightweight, with constant secondary pressure accuracy even at small capacities.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves for Hot and Cold Water, GD-28-NE Series

  YOSHITAKE

  Corrosion-resistant materials are used in the liquid-contacting parts. Superior chlorine resistance against running cold and hot water. The top section can be disassembled unidirectionally, allowing for internal inspection.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves (Hot and Cold water), GD-41 Series

  YOSHITAKE

  Saves space and resources. Stainless steel is used for fluid-contacting parts, fluoropolymer for fluid-contacting surfaces, and special fluorine rubber for rubber parts to provide superior corrosion resistance and durability.

  Days to Ship:	12 Day(s) or more

• 

  Door-to-Door Water Supply Pressure Reducing Valve and Directional Control Valve, CV-36UP/CV-36UV Series

  YOSHITAKE

  It is a fitting with built-in check that is compatible with the pressure reducing valve GD-46/38 Series for the house-to-house water supply for housing complexes with bypass.

  Days to Ship:	12 Day(s) or more

• 

  Door-to-Door Water Supply Pressure Reducing Valve Fitting, JO-36UP/JO-36UV Series

  YOSHITAKE

  Standard fitting for the GD-46 / 38 series of pressure reducing valves with bypass for door-to-door water supply in housing complexes.

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve for Door-to-Door Water Supply for Condominiums, for Use in Residential Complexes, GD-25GJ Series

  YOSHITAKE

  [Features]
  ・ It is a product that realizes low noise water supply as a pressure reducing valve for house-to-house water supply for housing complexes, etc.
  ・ The secondary pressure can be maintained extremely stable against pressure fluctuations on the water supply side, and a strainer is built in, and it is designed to be compact and lightweight, so piping can be handled easily
  ・ Since the noise of the pressure reducing valve itself has been eliminated, it is relieved to supply water even at midnight
  ・ The water supply pressure has already been adjusted to the standard set pressure, so there is no need for on-site pressure regulation
  ・ Since the valve structure uses a pressure balance structure, the secondary pressure is always kept constant without being affected by the primary pressure
  ・ Since it has a built-in strainer, it collects dust, sand, etc., if they are mixed in, and prevents it from getting caught in the valve or flowing out to the secondary side
  ・ The strainer cap can be removed without the use of tools. In addition, since the strainer and strainer cap are integrated, there is no strainer left in the valve box, making maintenance easy
  ・ The closed structure prevents fluid from flowing out even if the diaphragm is damaged
  ・ Since it has a pressure gauge fitting, the pressure gauge can be installed while water is flowing and the set pressure can be easily confirmed

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Lift Type Safety Valve AL-24/AL-24F Series

  YOSHITAKE

  [Features]
  ・ It uses a bronze valve box with a stainless steel valve seat so there is no risk of rust
  ・ Since it is a diaphragm type and has no sliding parts, it operates reliably
  ・ The set pressure range is as wide as 0.1 to 0.7 MPa with 1 spring, the adjusting thread is a handle type, and a butterfly nut is used for the lock nut, so the pressure can be easily changed
  ・ Smooth opening and closing even in continuous operation, it operates accurately with respect to the set pressure and discharges liquid
  ・ Stable operation can be obtained from small flow rate to large flow rate
  ・ According to the specifications, you can choose the material of the diaphragm and valve body from 2 types, NBR and FKM (fluoroelastomer)
  ・ It can be installed vertically, horizontally, top, or bottom

  Days to Ship:	12 Day(s) or more

• 

  RP-7, Pressure-Reducing Valve (for Steam) Benten

  VENN

  For steam cleaning of food equipment, disinfection equipment, cleaning equipment, etc.
  
  [Features]
  · Compact pilot-operated pressure-reducing valve used in equipment and devices with a relatively low flow rate.
  · Compact and lightweight (up to 50%, compared to other in-house products); device integration is supported.
  · Adoption of a piston guide structure and special seal ring makes control stable from lower flow rates to the maximum rated flow rate.
  · Manual handle control with auto locking mechanism makes pressure adjustment easy.
  · Compact design.

  Days to Ship:	12 Day(s) or more

• 

  RD-40, 41 Type Pressure-Reducing Valve (for Steam) Mini-Benten

  VENN

  For use in food machinery, medical equipment, laundry equipment, and other steam-based machinery
  
  [Features]
  - A direct-acting, pressure-reducing valve that is ideal for precise control of steam pressure for various equipment.
  - Compact and lightweight; optimum for integration into devices.
  - Optimal for items that need to be free of rust, such as food, kitchen equipment, medical equipment, laundry machines, and air conditioners (humidifiers).
  - Stainless steel body suitable for higher-grade vapor lines.
  - Provides large flow rates (heat) required when starting up equipment.
  - Main body is made of bronze or stainless steel; main parts are made of stainless steel for clean vapor.
  - Secondary side pressure can be smoothly adjusted with the manual handle on the automatic lock mechanism.
  - Uses SUS316L bellows and a built-in strainer for high reliability.

  Days to Ship:	12 Day(s) or more

• 

  RD-30 Type Pressure-Reducing Valve (for Vapor)

  VENN

  Direct acting type general-purpose products (small and medium capacity) such as construction equipment, factory equipment, etc.
  
  [Features]
  ▪ Performs stable operation from the small flow rates that cannot be controlled by pilot-operated products.
  ▪ Structure is little affected by dirt particles, and maintenance is easy.
  ▪ With use of special synthetic rubber diaphragms in multi-purpose direct-acting pressure reducing valve for pipeline and various steam equipment, it can support a wide range of applications.

  Days to Ship:	12 Day(s) or more

• 

  RD-31N, 32N Type Pressure Reducing Valve, Heisei

  VENN

  Direct-acting general-purpose products (made of bronze, medium capacity) for use in construction equipment, factory equipment, etc.
  
  [Features]
  - Serves as a bronze water-pressure reducing valve meeting rust-water prevention needs.
  - We combine our pressure-reduction technology with high controllability, reliability and user-friendliness, eliminating rust generation from pipe joints and across the flow path.
  - Heisei provides reliable countermeasures for rusty water, used in building facilities, house facilities, plant facilities, boiler water supply, etc.
  - Measures to prevent rusty water in normal state: Bronze body + pipe-end core to prevent rusty water.
  - Low-noise design.
  - Water does not leak outside if the diaphragm is damaged.
  - Built-in strainer.
  - (Nominal diameter of 50 or less 40 mesh equivalent) Smaller approximately 50% later than FC-made conventional parts.

  Days to Ship:	12 Day(s) or more

• 

  RD-47N Pressure-Reducing Valve for Door-to-Door Water Supply (for Cold/Hot Water), Benkei

  VENN

  Pressure reducing valve for hot and cold water supply used in apartment buildings, high-rise buildings, etc.
  
  [Features]
  · Water supply pressure reducing valve per room unit results in: 1) Reduces flow noise. 2) Eliminates water supply pressure variation difference with elevation difference. 3) No water splashes due to application of appropriate pressure. 4) During maintenance, impact of water outage does not affect wide area. 5. Stable mixing temperature resulting in improved habitability.
  · Uses chlorine water-resistant EPDM.
  · Sanitary design avoids pooling of liquids.
  · Works reliably from low differential pressures to high differential pressure.
  · Easy, simple new test gag method.
  · Safe and secure construction is made possible due to intact pressure-reducing valves.
  · You can conduct a hydraulic test even after construction while the pressure reducing valve is installed.
  ▪ Cassette type valve enables easy maintenance.
  · With a structure without caulking or welding, all components are recyclable and can be segregated and disposed.

  Days to Ship:	12 Day(s) or more

• 

  FD-9N, Flow-Regulating Valve (for Excess Flow Control / Water Supply)

  VENN

  Capable of providing suitable flow via regulation to prevent excessive flow for various types of equipment and machinery such as water supply pipes for large receiving tanks, water sprayers, and showers.
  *Consider performing installation in a location as far away as possible from areas that require quiet (hotel rooms, hospital rooms, housing, etc.)
  
  [Features]
  · Rich lineup of flow rate settings.
  ･ An internal constant flow cartridge can be replaced and maintained.
  · The elasticity of the unique rubber component used enables control of a stable and constant flow.

  Days to Ship:	17 Day(s) or more

• 

  Pressure Reducing Valve for Water, Liquid, Air, Gas, RD-20, 20N Series, [Heisei]

  VENN

  [Features]
  · A stainless steel, small-size pressure reducing valve that can be used for both liquid and gas supply pipes—especially in rust-intolerant places where bronze cannot be used. In addition, it can be used for stainless steel piping in door-to-door water supply systems.
  · Stainless steel and synthetic rubber are used for the liquid-contacting parts and spring casings for excellent corrosion resistance.
  · The carefully designed flow channel, utilization of square spring, etc., provide a significant size and weight reduction.
  · Freely adaptable installation positon.
  · Easy to maintain.
  · Can be used for liquid and gas, with a primary side pressure of 2.0 MPa.

  Days to Ship:	12 Day(s) or more

• 

  LP-8N Type, Water Level-Regulating Valve (for Water and General Use)

  VENN

  A water-level regulating valve for general water tanks that, apart from the insertion type structure of the bronze body and tube end core, has been simplified and made more compact by removing all adjusting mechanisms. Helps prevent rusty water.
  
  [Features]
  • Countermeasure for rusty water: Threaded type - The bronze body + pipe end core can be inserted.
  • A bypass flow path is used for the passage to the pilot piping, facilitating a quiet and stable water supply and ensuring that, even if the water supply from the ball tap is temporarily cut due to surges, water will still be available.
  • Since the valve is simple and compact, handling is easy.
  • Antifreezing FV jackets are provided.

  Days to Ship:	12 Day(s) or more

• 

  LP-8HN Level-Regulating Valve (for Water, for General Use with Adjustment Mechanisms)

  VENN

  [Features]
  · Standard constant water level valve with adjusting mechanism.
  · In order to prevent rust, threading can be bronze and embedded in the pipe end core.
  · A flow-rate adjustment mechanism and a valve closing time adjustment needle are provided.
  · Solution for rusty water: Screw-in = Bronze body + Pipe end core assembly is possible.
  · Because a bypass flow path is used for the passage to the pilot piping, intermittent water supply effects due to surges are eliminated, providing a silent and steady water supply.
  · Antifreeze FV jacket is provided.

  Days to Ship:	12 Day(s) or more

Loading...