Safety Valves, Control Valves（Page3）

• 

  FD-6N, Fixed Flow Rate Valve (for Individual Resident Water Supply/Hot Water Supply), Benkei

  VENN

  In addition to mainly being used in central hot water supply systems for housing complexes, high-rises, and the like, this fixed flow rate valve is also used in water supplying systems. This adjustable valve automatically restricts flow rates so that flow rate is fixed in response to fluctuations in primary side pressure.
  
  [Features]
  • By using this fixed flow rate valve, it becomes possible to appropriately distribute supplied water and hot water volumes to each residence.
  • As a result, system design and construction work are simplified, energy and water are saved, and water hammer is reduced.
  • Mounting position can be changed to any orientation.
  • Wide working differential pressure range.
  • The simple structure takes advantage of rubber elasticity to maintain a stable flow rate.

  Days to Ship:	12 Day(s) or more

• 

  FD-9N, Flow-Regulating Valve (for Excess Flow Control / Water Supply)

  VENN

  Capable of providing suitable flow via regulation to prevent excessive flow for various types of equipment and machinery such as water supply pipes for large receiving tanks, water sprayers, and showers.
  *Consider performing installation in a location as far away as possible from areas that require quiet (hotel rooms, hospital rooms, housing, etc.)
  
  [Features]
  · Rich lineup of flow rate settings.
  ･ An internal constant flow cartridge can be replaced and maintained.
  · The elasticity of the unique rubber component used enables control of a stable and constant flow.

  Days to Ship:	17 Day(s) or more

• 

  RD-25RSN, 50RSN Series Pressure-Reducing Valve for Water Supply

  VENN

  This is a pressure reducing valve used for supplying water to small boilers and electric water heaters. It can be freely mounted horizontally or vertically.

  Days to Ship:	12 Day(s) or more

• 

  RD-25SN, 50SN Series Pressure-Reducing Valve for Water Service

  VENN

  A pressure reducing valve for supplying water to small boilers and electric water heaters. Can be freely mounted horizontally or vertically.
  
  [Features]
  - Chlorine water-resistant EPDM for improved durability (RD-50SN series).
  - Low-noise type (RD-50SN series).
  - Mounting position can be changed to any orientation (except with strainer cap upwards).

  Days to Ship:	12 Day(s) or more

• 

  SL-35N/35HN Type, Relief Valve for Hot Water Equipment

  VENN

  Diaphragm type relief valve for small hot water boilers and electric water heaters. Used as a relief valve for pressure caused by thermal expansion and on the secondary side of pressure reducing valve.

  Days to Ship:	13 Day(s) or more

• 

  Pressure Reducing Valve for Water, Liquid, Air, Gas, RD-20, 20N Series, [Heisei]

  VENN

  [Features]
  · A stainless steel, small-size pressure reducing valve that can be used for both liquid and gas supply pipes—especially in rust-intolerant places where bronze cannot be used. In addition, it can be used for stainless steel piping in door-to-door water supply systems.
  · Stainless steel and synthetic rubber are used for the liquid-contacting parts and spring casings for excellent corrosion resistance.
  · The carefully designed flow channel, utilization of square spring, etc., provide a significant size and weight reduction.
  · Freely adaptable installation positon.
  · Easy to maintain.
  · Can be used for liquid and gas, with a primary side pressure of 2.0 MPa.

  Days to Ship:	12 Day(s) or more

• 

  MD-14 Type Series, Primary Pressure Regulating Valve (for Liquid/Air)

  VENN

  Pump relief, pressure tanks, piping etc.
  
  [Features]
  · Used as a pump relief valve.
  • Structure that takes Hunting vibration, etc. into account and provides stable operation.
  • Can be used as a relief valve for pressure tanks, piping etc.
  • Uses a piston type balance structure so changes in outlet pressure due to backpressure fluctuations are small.
  • Unidirectional disassembly the top facilitates internal inspection, simplifying maintenance.
  • MD-14CN features a rust-resistant nylon-coating.

  Days to Ship:	12 Day(s) or more

• 

  LP-8N Type, Water Level-Regulating Valve (for Water and General Use)

  VENN

  A water-level regulating valve for general water tanks that, apart from the insertion type structure of the bronze body and tube end core, has been simplified and made more compact by removing all adjusting mechanisms. Helps prevent rusty water.
  
  [Features]
  • Countermeasure for rusty water: Threaded type - The bronze body + pipe end core can be inserted.
  • A bypass flow path is used for the passage to the pilot piping, facilitating a quiet and stable water supply and ensuring that, even if the water supply from the ball tap is temporarily cut due to surges, water will still be available.
  • Since the valve is simple and compact, handling is easy.
  • Antifreezing FV jackets are provided.

  Days to Ship:	12 Day(s) or more

• 

  LP-8HN Level-Regulating Valve (for Water, for General Use with Adjustment Mechanisms)

  VENN

  [Features]
  · Standard constant water level valve with adjusting mechanism.
  · In order to prevent rust, threading can be bronze and embedded in the pipe end core.
  · A flow-rate adjustment mechanism and a valve closing time adjustment needle are provided.
  · Solution for rusty water: Screw-in = Bronze body + Pipe end core assembly is possible.
  · Because a bypass flow path is used for the passage to the pilot piping, intermittent water supply effects due to surges are eliminated, providing a silent and steady water supply.
  · Antifreeze FV jacket is provided.

  Days to Ship:	12 Day(s) or more

• 

  LP-8AN Level-Regulating Valve (for Water, Angled)

  VENN

  [Features]
  · Angle level-regulating valve which prevents red water by using bronze for the main body. The general flow rate adjustment mechanism makes it possible to adjust the water expulsion volume using an adjustment screw and the valve closing time using a needle valve.
  ·When used in cold weather, residual water is minimized during drainage, and water is supplied steadily during rewatering.
  · The body is made of bronze, so it does not rust.
  · Two model series, one general-purpose with an adjustment mechanism and one for cold climates, are offered, so the user can choose a model according to the target application.
  · Antifreezing FV jacket is provided (except for the LP-8ARN model).

  Days to Ship:	12 Day(s) or more

• 

  LP-8RN, Level-Regulating Valve (for Water, for Cold Areas)

  VENN

  By using a bypass flow path for the path to pilot piping, intermittent water supply effects due to surges are eliminated, providing a silent and steady water supply.
  
  [Features]
  · Constant water level valve for cold climates equipped with a drainage mechanism and a flow rate adjustment mechanism.
  · To prevent rusty water, the screw model can incorporate a pipe end core built into a bronze body.
  · Level-regulating valve suitable for use in cold regions.
  · Includes water drain mechanism and flow rate adjustment mechanism.
  · Rusty water countermeasures: a bypass flow path is used for the passage to pilot piping where the screw type can = body made of bronze + built-in pipe end core, enabling a quiet and steady water supply with no ball tap intermittent water supply effects due to surges

  Days to Ship:	12 Day(s) or more

• 

  TD-8, 8 A Type Temperature Control Valve

  VENN

  [Features]
  It is a general purpose flange temperature regulating valve, so it is used for temperature regulation in hot water tanks, heat exchangers, heavy fuel heating apparatus, or used for cooling by passing water or refrigerants, or used at low temperatures when the surrounding atmospheric temperature is higher than the set temperature, or when the set temperature is 40°C or less.

  Days to Ship:	12 Day(s) or more

• 

  TD-2 Type Series, Temperature Control Valve

  VENN

  Heating, cooling, and low temperature models are available.
  
  [Features]
  · General purpose flange type temperature adjustment valve, available for heating applications such as hot water tanks, heat exchangers, and heavy oil heaters, for cooling applications using water or a refrigerant, and low temperature applications where the set temperature is below the ambient temperature or where the set temperature is 40°C or below.

  Days to Ship:	12 Day(s) or more

• 

  JRG3400 Type Mixing Valve

  VENN

  [Features]
  · Hot water supply is simply done by connecting hot water and cold water.
  · Thermo-element tracks well the pressure fluctuations of hot water and cold water, ensuring temperature stability of hot water supply.
  · Both the double-pipe type (circulation method) and single-pipe type are supported.
  · Materials such as bronze, stainless steel, and resin with excellent corrosion resistance are used.
  · Lightweight and compact design delivers workability and reduces footprint.
  Simply by simply connecting hot water with water, a JRG mixing valve is a temperature adjustment valve that can freely control hot water supply temperature.
  ・Stable supply of hot water can be obtained and used with confidence for facilities that use hot water in large quantities.

  Days to Ship:	17 Day(s) or more

• 

  TR-4N Type Mixing Valve

  VENN

  [Features]
  • The TR-4 N mixing valve is a temperature regulating valve that is able to control the temperature of hot-water supply by simply connecting the hot water and water.
  • As well as ensuring a temperature-stable supply, it also guarantees safety as both the cold and hot water have built-in check valves.
  • A lightweight and compact design that improves workability and saves on space.
  • Complies to the performance standards of the Water Supply Act of Japan, allowing for peace of mind when used with water supply systems.
  • The thermo-element is able to track pressure fluctuations in the hot and cold water, ensuring temperature-stable hot water supply.
  • Inspection of internal components, including the thermo-element, is possible, making it easy to maintain.
  • The inlet end of the union joint (hot-water/water) features both a built-in check valve and net.

  Days to Ship:	12 Day(s) or more

• 

  AF-5N Air Vent Valve

  VENN

  A bronze air vent valve for use with high-pressure liquids that has a built-in filter (muffler) to dampen the sound of high pressure air discharge.

  Days to Ship:	12 Day(s) or more

• 

  AF-6N Air Vent Valve

  VENN

  [Features]
  · Small air vent valve to be used in a pipe, hot water boiler, fan coil, small or medium pressure tank, solar system, or others.
  · Operations are stable due to the BBC (bubble dispersion) method, so water discharge does not occur.
  · The air exhaust is tube-shaped.
  · Compact and capable of up to 1.0MPa.
  · Equipped with manual shut-down mechanism.

  Days to Ship:	16 Day(s) or more

• 

  AF-17N Air Vent Valve

  VENN

  Building equipment, housing and hot water boiler products with main bodies made from bronze and are complaint with government specifications
  
  [Features]
  · Small air vent valve to be used in a pipe, hot water boiler, fan coil, small/medium pressure tank, solar system, or others.
  · Operates stably due to the BBC (bubble dispersion) method, so water entrainment discharge does not occur.
  · The bronze made main body is compliant with government specifications.
  · Besides having a female screw shape, the vent is also available with union fitting, and tube fittings.
  · Compact and capable up to 1.0MPa.
  ▪ Equipped with manual shut-down mechanism.

  Days to Ship:	12 Day(s) or more

• 

  AF-9 Series Air Vent Valve

  VENN

  Air vent valve with built-in check valve such as pump suction side or sealed circuit
  
  [Features]
  · Air vent valve made of stainless steel with built-in strainer in the main body that boasts superior corrosion resistance and durability. The AF-10 type series has air intake and exhaust functions.
  · AF-9 type series is an air vent valve with a built-in check valve and is structured to not intake here even when the inlet side is exposed to negative pressure. Hence, it is used when a function is required for only emitting and not in taking the air, such as in the pump suction inlet side and degassing system of sealed circuits.
  · Easy design construction possible with the built-in strainer.
  · Made of stainless steel for superior corrosion resistance and durability.
  · The exhaust vents can be freely rotated 360° and are easy to work with.
  · Equipped with manual shut-down control.
  · Does not absorb air even when the pressure is negative, and therefore can be mounted into the pump suction inlet side.

  Days to Ship:	11 Day(s) or more

• 

  AFV-1 N Air Vent Valve, with Intake Mechanism

  VENN

  For construction equipment, factory equipment, and hot water boiler, etc.
  
  [Features]
  · Small air vent valve with reinforced intake function used in piping, hot water boiler, fan coil, small/medium pressure tank, solar energy system, or others.
  · Operations are stable due to the BBC (bubble dispersion) method used on discharge side such that water entrainment does not occur.
  ▪With the included breather fitting, intake and discharge of air is possible through single port, facilitating piping without sewage intake.

  Days to Ship:	12 Day(s) or more

• 

  AFV-4N, 5 Suction and Exhaust Valves

  VENN

  The pressure on the intake side of the valve should always be 0.01 MPa or higher.
  
  [Features]
  · Air intake flow is high when loading occurs (rapid intake function).
  · Reliable air discharge operation at pressure (discharge at pressure function).
  · Air exhaust rate is high during initial water throughput (initial exhaust function).
  · Water is not discharged during air discharge.
  · The intake and exhaust ports freely rotate.
  · A net is built into the air intake part.
  · Made of stainless steel (AFV-5) which is ideal for stainless steel water piping.

  Days to Ship:	12 Day(s) or more

• 

  AV-2C Type Vent Valve (Maxi-Vent)

  VENN

  Intended for drainage pipe equipment such as attic/piping shaft/ceilings
  
  [Features]
  · In drainage standpipes and drainage horizontal branch pipes, vent pipes open when there is negative pressure and sucks in the air to equalize the pressure in the drainage pipe and protect the trap's sealing water.
  · The valve is normally closed to prevent offensive odors from leaking out.
  · Shuts out pest intrusion.
  · Maintenance not required. Durability equivalent to drainage facilities.
  · Also mountable below the flood rim and compatible with temperatures from -20 to 60°C.
  · Flexible construction design provided.

  Days to Ship:	12 Day(s) or more

• 

  AV-4C, Ventilation Valve for Single Family Houses (Residence Vent)

  VENN

  For drain pipe equipment in single family houses
  
  [Features]
  • Shuts out pests.
  • No need for maintenance. Durability consistent with standard drainage facilities.
  • Also mountable below an overflow edge and compatible with temperatures from -20 to 60°C.
  • Provides additional freedom for building designs.

  Days to Ship:	12 Day(s) or more

• 

  FM Valve Type 3

  FMVALVE

  [Features]
  ·Since it can be controlled by electricity when used in combination with a solenoid valve, it is easy to change the interval between timed water supply, water supply stop, and water supply start.
  ·Unique buffer mechanism prevents water hammer
  ·Equipped with a flow rate adjustment mechanism, the amount of water discharged can be adjusted.
  ·If the pump for the water tank is a pressurized water supply system, use an electric control system.

  Days to Ship:	10 Day(s) or more

• 

  FM Valve 3FB Integrated

  FMVALVE

  [Features]
  ·Effective for pressurized water supply systems
  ·This valve uses a fully open and fully closed operation method to prevent vibration.
  ·Since the water level difference from water supply to stop can be secured, malfunction due to waves is also prevented.
  ·Equipped with a flow rate adjustment mechanism, the amount of water discharged can be adjusted.

  Days to Ship:	10 Day(s) or more

• 

  FM Unit Valve A-2 (Opens when Power Is Supplied)

  FMVALVE

  Days to Ship:	10 Day(s) or more

• 

  FM Valve Type S-3

  FMVALVE

  This valve can be used in both a mechanical control system with a ball tap and an electrical control system with a solenoid valve.
  [Features]
  ·Equipped with a flow rate adjustment mechanism, the amount of water discharged can be adjusted.
  ·The strainer can be removed while the body is attached to the pipe.
  ·Since it can be controlled by electricity when used in combination with a solenoid valve, it is easy to change the interval between timed water supply, water supply stop, and water supply start.
  ·For 65 mm or more, the plug can be removed and the intake valve can be installed
  ·If the pump for the water tank is a pressurized water supply system, use an electric control system.

  Days to Ship:	10 Day(s) or more

• 

  FM Valve Type S-3F

  FMVALVE

  [Features]
  ·Equipped with a flow rate adjustment mechanism, the amount of water discharged can be adjusted.
  ·The strainer can be removed while the body is attached to the pipe.
  ·Since it can be controlled by electricity when used in combination with a solenoid valve, it is easy to change the interval between timed water supply, water supply stop, and water supply start.
  ·For 65 mm or more, the plug can be removed and the intake valve can be installed
  ·If the pump for the water tank is a pressurized water supply system, use an electric control system.

  Days to Ship:	10 Day(s) or more

• 

  Core Built-in Type FM Valve S-3K Type

  FMVALVE

  This valve can be used in both a mechanical control system with a ball tap and an electrical control system with a solenoid valve.
  [Features]
  ·A resin core is attached to the threaded portion of the main body connection, and has a structure that prevents the outflow of rust from the threaded portion of the steel pipe.
  ·The strainer can be removed while the body is attached to the pipe.
  ·Since it can be controlled by electricity when used in combination with a solenoid valve, it is easy to change the time water supply, water supply stop, and water supply start.
  ·Equipped with a flow rate adjustment mechanism, the amount of water discharged can be adjusted.
  ·If the pump for the water tank is a pressurized water supply system, use an electric control system.

  Days to Ship:	10 Day(s) or more

• 

  FM Valve S-3N Type for Cold Climate

  FMVALVE

  By opening and closing the ball tap (auxiliary valve), this valve creates a pressure difference within the main valve (main valve), opening and closing the valve, and automatically repeating water supply and stoppages according to changes in the water level in the receiving tank.
  The secondary side (outlet side) is equipped with a peacock for draining water and a flow rate adjustment rod for adjusting the flow rate.
  [Features]
  ·Unique buffer mechanism prevents water hammer
  ·Peacock allows water to be drained from the secondary side (outlet side)
  ·The strainer can be cleaned and inspected without removing the main unit.
  ·Equipped with a flow rate adjustment mechanism, the amount of water discharged can be adjusted.

  Days to Ship:	10 Day(s) or more

• 

  FM Intake Valve (FM-VB)

  FMVALVE

  FM Valve Mfg. Co., Ltd. Safety valve/regulating valve FM intake valve (FM-VB).

  Days to Ship:	17 Day(s) or more

• 

  Bimetallic Disc Temperature Control Trap TB9N Type

  MIYAWAKI

  [Features]
  ・ SCCV (Self Closing and Centering Valve) mechanism (): The valve is spherical and is not fixed to the shaft, but is designed to be held with some play left, right, front and back. Since the design structure holds the valve with play, even if the shaft slightly tilts due to the effect, etc., of condensed water when the valve is closed, the valve itself can flexibly close toward the center of the valve hole
  ・ QC (Quick-Close mechanism) mechanism (): When condensate flows from the inside of the trap body to the valve hole, the valve pushed down by the expansion force of the bimetal plate gradually closes the flow passage hole provided in the guide that shuts off the inside of the body and the valve hole. The valve gradually closes the flow passage hole, weakening the flow rate of the condensate passing through the valve opening, heats the bimetal more quickly, and promotes valve closing
  ・ Also available with convenient blow valve: There is also a type with a blow valve that removes scale and pipe dust that flows into and accumulates in the trap to the outside without disassembling the trap
  ・ If you would like to have a blow valve, please specify TB9BN-C or TB9BN-R
  ・ TB9BN-C can be used up to 0.98 MPa, and cock operation is easy
  ・ TB9BN-R can be used up to 1.6 MPa
  [Applications]
  ・ Ideal for steam tracing, steam transport pipes, tank heating, heating, etc.

  Days to Ship:	14 Day(s) or more

• 

  Bimetallic Disc Temperature Control Trap TB7N Type

  MIYAWAKI

  [Features]
  ・ Adopts SCCV mechanism and QC mechanism
  ・ The SCCV (self-controlled seated valve) mechanism has an excellent sealing performance because the valve is free in the holder and is softly drawn to the center axis of the valve seat when the valve is closed
  ・ Achieve faster start-up
  ・ Quickly discharges low-temperature condensate and air at the beginning of ventilation
  ・ Also functions as an air vent
  [Applications]
  ・ Steam transport pipe, trace line, etc.

  Days to Ship:	22 Day(s) or more

• 

  Air Vent for Steam - AT9N Type

  MIYAWAKI

  It is an air vent for steam. [Features]·Will shorten equipment startup time as a result of quick air displacement.

  Days to Ship:	22 Day(s) or more

• 

  Air Vent for Steam - AW2 Type

  MIYAWAKI

  [Features]
  ·Rapid air evacuation shortens equipment start-up time.
  [Applications]
  ·It can be used for steam piping and various devices.

  Days to Ship:	22 Day(s) or more

• 

  Direct Acting Steam Pressure Reducing Valve - RE1 Type

  MIYAWAKI

  [Features]
  ・ Ultra compact and lightweight design, about half the size and weight of conventional products
  ・ Reliable operation, effective in saving energy and improving productivity
  ・ Increased rated flow rate by devising original orifice plate
  ・ The control bellows by original device has excellent durability
  ・ The handle is made of special plastic, easy to grip and shape with excellent heat dissipation
  ・ Sharp and simple design. Plus forged body is perfect for beautiful styling
  ・ Improved gaskets make maintenance easier
  ・ One of the attractions of this performance is that it is inexpensive
  [Applications]
  ・ Cleaning / apparel industry
  ・ Food industry / dyeing industry
  ・ Ideal for heating equipment, sterilizers, rubber vulcanizers, etc.

  Days to Ship:	16 Day(s) or more

• 

  Direct Acting Steam Pressure Reducing Valve - REC1 Type

  MIYAWAKI

  [Features]
  ·It is made entirely of stainless steel and has excellent corrosion resistance.
  ·Maximum decompression ratio 30:1.
  ·Compact and lightweight design allows installation in narrow spaces.
  ·The pressure can be easily adjusted by operating the handle without using any tools.
  [Applications]
  ·food equipment.
  ·Medical equipment.
  ·Small processes such as bio-related equipment.

  Days to Ship:	22 Day(s) or more

• 

  Direct Acting Steam Pressure Reducing Valve - RE2 Type

  MIYAWAKI

  [Features]
  ·An ultra-compact and lightweight design with an overall height of 120 mm (total height reduced by 34% and weight reduced by approximately 60%).
  ·It can be installed in two directions: horizontal and L-shaped.
  ·The unique stainless steel micro bellows and overstress prevention mechanism work to provide outstanding durability.
  ·The unique simple blow-off mechanism makes it easy to blow dust, etc.
  ·Pressure adjustment can be easily set by operating the handle.
  ·It is easy to disassemble and assemble, and has excellent maintainability.
  [Applications]
  ·Sewing.
  ·Such as steam irons in the cleaning industry and small steam appliances.

  Days to Ship:	22 Day(s) or more

• 

  Temperature Control Trap for Copper Tube Tracing - Model TB1N

  MIYAWAKI

  [Features]
  ・ There is no restriction on the mounting posture
  ・ Unique operation eliminates temperature unevenness, prevents water hammer and pressure drop in piping, and enables safe and highly efficient tracing
  ・ The use of a highly sensitive disc bimetal ensures accurate operation even with slight temperature changes
  ・ Compact design allows installation in small spaces
  ・ Maintenance can be easily done by unitizing the bimetal group
  [Applications]
  ・ Steam trace
  ・ Suitable for fields such as petroleum, petrochemical and steel making for instrumentation

  Days to Ship:	22 Day(s) or more

• 

  Temperature Control Trap for Copper Tube Tracing - Model TBC2

  MIYAWAKI

  [Features]
  ・ Improved corrosion resistance
  ・ Improved energy saving
  ・ Reduced blockage due to scale
  ・ Reduced heat dissipation due to compact design
  [Applications]
  ・ Steam trace

  Days to Ship:	22 Day(s) or more

• 

  Micro Bellows Pilot Operation Steam Pressure Reducing Valve - RE10N Type

  MIYAWAKI

  [Features]
  ·It is compact and lightweight, so it can be installed in a small space.
  ·It can be easily adjusted by simply operating the handle (with lock mechanism).
  ·The development of stainless steel micro bellows and high-precision pilot valve ensures reliable control.
  ·The stainless steel micro bellows and overstress prevention mechanism (patent pending) provide excellent durability.
  ·The compact design reduces heat dissipation.
  ·Fluororesin gaskets are used for the main parts, providing good sealing performance. In addition, disassembly, assembly, and parts replacement can be easily performed using commercially available tools, offering excellent maintainability.
  [Applications]
  ·Food industry, dyeing industry, cleaning industry, apparel industry, heating equipment, air conditioning equipment, etc.

  Days to Ship:	22 Day(s) or more

• 

  Micro Bellows Pilot Operation Steam Pressure Reducing Valve - RE3 Type

  MIYAWAKI

  [Features]
  ·It is a plus forged product, and is ultra-compact (approximately 50% lower in overall height) and lighter (approximately 60% lighter in weight) than conventional pressure reducing valves for steam, requiring less installation space.
  ·It can be easily adjusted by simply operating the handle (with lock mechanism).
  ·The unique stainless steel micro bellows and high-precision pilot valve have been developed to ensure reliable control.
  ·Its unique stainless steel micro bellows and overstress prevention mechanism (patent pending) provide outstanding durability.
  ·The amount of heat dissipated is reduced, making it excellent in energy saving and economic efficiency.
  ·A fluororesin (PTFE) gasket is used for the main parts, so it has good sealing performance, and it is easy to disassemble, assemble, and replace parts with commercially available tools.
  [Applications]
  ·Food industry, dyeing industry, cleaning industry, apparel industry, heating equipment, air conditioning equipment, etc.

  Days to Ship:	22 Day(s) or more

• 

  CPJ-K waterproof Fitting for Vent Pipe [Public Group Type/Standard Product]

  CHUBUCORPO

  ● Suitable pipe types are SGP and VP. ● The main body is of a post-installation slab type. ● Hawk cut anchor and countersunk head screws are included.
  

  Days to Ship:	12 Day(s) or more

• 

  CPJ-KL waterproof Fitting for Vent Pipe [Public Group Type, Long/Standard Product]

  CHUBUCORPO

  ● Suitable pipe types are SGP and VP. ● The main body is of a post-installation slab type. ● Hawk cut anchor and countersunk head screws are included.
  

  Days to Ship:	12 Day(s) or more

• 

  Check Valve (for Pipe Terminal Equipment) EA469BR-14

  ESCO

  For plumbing terminal fixtures (mixing faucets, water purifiers). [Main Body Material]Brass, polyacetal

  Days to Ship:	16 Day(s) or more

Loading...