Suction Cups（Page2）

• 

  Vacuum Pad, Long Stroke Standard Type, VPC, One-touch Fitting Type without Cover

  PISCO

  *The CAD data for this Series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Adherence is possible even if the distance from the pad to the work is indeterminate.
  · We offer this fitting in a wide range of pad sizes, pad materials, and holder shapes.

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Vacuum Pad, Long Stroke Bellows Type, VPC, Barb Fitting Type without Cover

  PISCO

  Suction is possible even when distance between pad and workpiece is not fixed. *The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Vacuum Pad, Standard Type, VPA, One-touch Fitting Type

  PISCO

  Ideal for thick and flat general work
  
  [Features]
  · Containers of various shapes are available, including a general type ideal for flat work (work that is hard and of a non-flimsy thickness), a deep type ideal for round fruit (apples, etc.) and balls, and a small type ideal for small work or for use in semiconductor manufacturing facilities.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Pad holders have been added for applications requiring "no use of copper-based metals" and "reduced ozone concentrations."
  · Copper-based metals are not used for metal parts. HNBR is used as the sealing rubber material.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Vacuum Pad, Air Pincette, with Valve Type

  PISCO

  Optimal for transporting small parts *CAD data for this series is being revised. Data will be available as soon as modifications are complete.
  
  [Features]
  · Air pin set with a vacuum pad and vacuum generator are built into the the pen-type main body.
  · Ideal for assembly of small components.
  · Valve built-in type: VTB saves energy due to low noise and air flows which occur only during usage

  Days to Ship:	13 Day(s) or more

• 

  Vacuum Pad, Soft Bellows Type, Pad Rubber

  PISCO

  An extremely soft type fitting that is optimally suited for adhering to paper and plastic molded artifacts.
  
  [Features]
  · The pad rubber has superior elasticity for adhering to paper, etc. In addition, adhering to plastic molded artifacts leaves relatively no trace.
  · This fitting is offered in a wide range of pad sizes, pad materials, and holder shapes.
  · The holders (A and B types) have been downsized for existing vacuum pads making it possible to save space.
  · The pad can be changed in the normal way without detaching the holder from the equipment.
  · In addition, this fitting is also compatible with the optional fall prevention valve and the directly attachable type pad filters.
  · Fittings with vacuum outlets on both sides of the pad holder (VPHD and VPHE types) are also now available. This fitting is optimally suited for use in adhering/transporting molded artifacts by linking multiple vacuum pads to a single vacuum source.
  · Pad holders have been added for applications that require the use of non-copper based metals and measures against low-concentration ozone.
  · No copper-based metals are used in the metal component materials. HNBR is utilized for the rubber sealing material.

  • STOCK

  Days to Ship:	Same day or more

• 

  Pad With Buffer Bracket NAPFTS/YS

  MYOUTOKU

  Standard flat pad available with a wide range of pad sizes.
  [Features]
  · Supports pad sizes from ø1.5 to 200 (diameter 1.5 to 200 mm).
  · Exceptional durability and a long lifespan.
  · Dry bearings are used in the stroke part for excellent durability.
  · Fitting has a stroke function to reduce the load when contacted to the suction target object.
  [Applications]
  · For suction transport of all materials such as metal, resin and paper.
  · For heavy load transport.

  Days to Ship:	14 Day(s) or more

• 

  Vacuum Pad Lateral Vacuum Entry Type With Buffer, With One-Touch Fittings, ZPR Series

  SMC

  A suction pad manufactured by SMC.
  [Features]
  · Can be used for a wide-range of applications in many different models.
  · Pad types: flat type, flat type with ribbing, thin type, thin type with ribbing, deep type, bellows type.
  · Pad diameters: ø2 to ø50.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Vacuum Pad, Large-Bellows Vertical Vacuum Entry Type With Buffer, ZPT Series

  SMC

  A suction pad manufactured by SMC.
  [Features]
  · Ideal for workpieces with a curved suction surface, heavyweight workpieces and workpieces with large surface area.
  · Compatible with heavy-duty, flat-type pads with ribbing.
  · Easily adapts to the shape of the workpiece and adheres to the side of circular cylinders.
  · The pad shape gains suction even on inclined suction surfaces.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Vacuum Pad, Large / Heavy-Duty Type, Lateral Vacuum Entry Without Buffer, ZPX Series

  SMC

  A suction pad manufactured by SMC. Ideal for heavyweight or large workpieces such as cathode-ray tubes and automobiles.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Vacuum Pad, Large-Bellows Type ZPT/ZPX Series, Pad Unit

  SMC

  Pad for large-bellows pads.
  [Features]
  · Replacement pad unit.
  · Pad diameters: 40 mm / 50 mm / 63 mm / 80 mm / 100 mm / 125 mm.
  · Pad type: large-bellows pad.
  · Materials: N (NBR) / S (silicone rubber) / U (urethane rubber) / F (fluorine rubber) / E (EPR).
  [Applications]
  · Replacement part for the ZPT and ZPX series.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Small Pad ZP2 Series

  SMC

  [Features]
  · 7 types added from ø3 to ø8
  · Applicable to ZP series adapters

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Heavy-Duty Ball Joint Pad ZP2 Series

  SMC

  Suitable for suction on inclined workpieces

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Suction Plate SP Series

  SMC

  [Features]
  ・ Compatible with adsorption and fixation of thin sheets, glass substrates, soft workpieces, etc.
  There is no deformation of the workpiece during suction because it sucks through a large number of minute holes on the suction surface.
  ・ High processing accuracy.
  ・ Great holding force.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Suction Cup Complete

  FESTO

  An extensive, modular range of suction cups with connection attachments, in different shapes, materials and sizes, plus a wide selection of suction cup holders, angle and height compensators and vacuum filters within the modular suction gripper system, provide users with a huge range of possible combinations for a wide variety of applications.

  Days to Ship:	4 Day(s) or more

• 

  Suction Holder, Rigid Type, Upper: Single-Action Type (K Shape), Sponge Type/Bellows Type

  MISUMI

  [Features]·A fixed type absorption holder, Upper: single-action type (K shape). ·Sponge type / bellows type.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Vacuum Pad Spring Holder, Top: Single-Action Type (T Shape) Standard Type / Deep Type

  MISUMI

  [Features]·An absorption holder, spring-loaded, upper, single-action type (T shape). ·Standard type / deep type.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Suction Cup Fittings Oval/Thin Object Type, Spring Type Side: One-Touch (Shape L)

  MISUMI

  [Features]·An absorption holder, spring-loaded, upper, single-action type (L shape).

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Vacuum Pad Spring Holder, Top: Single-Action Type (T Shape), Oval Type/Thin Object Type

  MISUMI

  [Features]·An absorption holder, spring-loaded, upper, single-action type (T shape). ·Oblong type / thin object type.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Suction Cup Units Thin Object Type

  MISUMI

  [Features]·A vacuum pad for thin objects. [Material]·Rubber.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Suction Holder, Direct Mount Spring Type, Screw Type (S Shape), Standard Type/Deep Type

  MISUMI

  [Features]·An absorption holder, direct mount spring-loaded screw type (S shape). ·Standard type / deep type.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Vacuum Pad Spring Holder, Top: Single-Action Type (T Shape), Sponge Type/Bellows Type

  MISUMI

  [Features]·An absorption holder, spring-loaded, upper, single-action type (T shape). ·Sponge type / bellows type.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  MiSUMi Economy

  Suction Cups MV Series Soft Pad, Single Pad/Unit

  MISUMI

  • Volume Discount

  Days to Ship:	10 Day(s)

• 

  MiSUMi Economy

  Suction Cups MV Series Soft Bellows, Single Pad/Unit

  MISUMI

  • Volume Discount

  Days to Ship:	10 Day(s)

• 

  MiSUMi Economy

  Suction Cups MZ Series Low Profile Type, Single Pad/Unit

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s)

• 

  MiSUMi Economy

  Suction Cups MZ Series Ribbed Type, Single Pad/Unit

  MISUMI

  • Volume Discount

  Days to Ship:	10 Day(s)

• 

  Vacuum Pad, Long Stroke Sponge Type, VPD, Barb Fittings Type with Cover

  PISCO

  *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · The vacuum pad can adhere to the material even if the distance between them varies.
  · A wide range of pad sizes, pad materials, and holder shapes are available.

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Vacuum Pad, Long Stroke Bellows Type, VPC, One-touch Fitting Type with Cover

  PISCO

  Suction is possible even when distance between pad and workpiece is not fixed. *The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Vacuum Pad, Soft Type, Pad Rubber

  PISCO

  Optimal for removing molded parts and transporting easily scratched materials
  
  [Features]
  · The SUS pad rubber is flexible enough to adhere plastic molded parts while leaving relatively few traces.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Downsizes holders (A and B types) for existing vacuum pads, saving space.
  · The pad section can be changed without removing the holder from the equipment, as is conventional.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holder (VPHD and VPHE types) with vacuum inlet on both sides is now available.
  · Optimal for usage in adhering and transporting molded products by connecting several vacuum pads to one vacuum source.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  • STOCK

  Days to Ship:	Same day or more

• 

  Vacuum Pad, Bellows Small Type, VPMB, One-touch Fitting Type

  PISCO

  Optimal for transporting bags that contain retort packs and food .*CAD data is now being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · Capable of adhering to extremely soft work, such as paper and vinyl, and including the features of a swing pad.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Downsizes holders (A and B types) for existing vacuum pads, making it possible to save space.
  · As is conventional, you can change the pad section without removing the holder from the equipment.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · For applications requiring "copper based metal not used" and "reduce ozone concentrations."

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Vacuum Pad, Oval Type, VPC, One-touch Fitting Type

  PISCO

  *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · Optimal for conveying long items such as circuit boards and semiconductors.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Downsizes holders (A and B types) for existing vacuum pads, saving space.
  · The pad section can be changed without removing the holder from the equipment, as is conventional.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Vacuum Pad, Sponge Type, VPA, One-touch Fitting Type

  PISCO

  Vacuum pad optimal for use in work on uneven surfaces, *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · Ideal for working on uneven surfaces such as exterior wall materials, small rocks, and shells.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Downsizes holders (A and B types) for existing vacuum pads, saving space.
  · The pad section can be changed without removing the holder from the equipment, as is conventional.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Vacuum Pad, Sponge Type, Pad Rubber

  PISCO

  Vacuum pad optimal for use in work on uneven surfaces, *CAD data for this series is being revised. Data will be available as soon as modifications are complete.
  
  [Features]
  · Ideal for work pieces that have irregularities on the surface (work pieces like exterior wall materials of a building, small rocks and shells).
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Reduces the size of holders (A and B types) for existing vacuum pads, making it possible to save space.
  · As with conventional solutions, you can change the pad section without removing the holder from the equipment.
  · Moreover, it is also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad for applications where "copper based metals cannot be used" or "a reduction in ozone concentration" is required.

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Vacuum Pad, Air Pincette, Anti-Static Type, without Valve

  PISCO

  *The CAD data for this series is being revised. It will be available as soon as modifications are complete.
  
  [Features]
  · The pen-type main unit features a vacuum pad and vacuum generator within .
  · Connect the tube (ø4 ㎜) and supply compressed air (0.5MPa). Then, a vacuum is formed via hole or button control, and the work piece is adhered.
  · Two types with different characteristics are available. The VTB type has a built-in valve that only lets air flow during use, keeping noise down and conserving energy. The VTA type has no valve, keeping it inexpensive.
  · An anti static type, ideal for assembly processes where the presence of static electricity is an issue, is also now available.
  • Two types of pad holder shape are also available.
  • In addition to the conventional R type, a straight type has also been added to the product line. Choose the one that fits the job.

  Days to Ship:	16 Day(s) or more

• 

  Pad With Buffer Bracket/NAPJTS and YS

  MYOUTOKU

  A thin lip-type pad that enables suctioning of spherical and angled surface items.
  [Features]
  · A thin lip-type having 2 bellows.
  · Exceptional durability and a long lifespan.
  · Has bellows and excellent cushioning.
  · Dry bearings are used in the stroke part for excellent durability.
  [Applications]
  · For suctioning spherical and angled-surface items.

  Days to Ship:	14 Day(s) or more

• 

  Vacuum Pad Lateral Vacuum Entry Type Without Buffer, With One-Touch Fittings, ZPR Series

  SMC

  A suction pad manufactured by SMC.
  [Features]
  · Can be used for a wide-range of applications in many different models.
  · Pad types: flat type, flat type with ribbing, thin type, thin type with ribbing, deep type, bellows type.
  · Pad diameters: ø2 to ø50.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Vacuum Pad Lateral Vacuum Entry Type Without Buffer, With Barbed Fittings, ZPY Series

  SMC

  A suction pad manufactured by SMC.
  [Features]
  · Can be used for a wide-range of applications in many different models.
  · Pad types: flat type, flat type with ribbing, thin type, thin type with ribbing, deep type, bellows type.
  · Pad diameters: ø2 to ø50.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Vacuum Pad, Large / Heavy-Duty Type, Vertical Vacuum Entry Type Without Buffer, ZPT Series

  SMC

  A suction pad manufactured by SMC. Ideal for heavyweight or large workpieces such as cathode-ray tubes and automobiles.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Vacuum Pad, Large-Bellows Vertical Vacuum Entry Type Without Buffer, ZPT Series

  SMC

  A suction pad manufactured by SMC.
  [Features]
  · Ideal for workpieces with a curved suction surface, heavyweight workpieces and workpieces with large surface area.
  · Compatible with heavy-duty, flat-type pads with ribbing.
  · Easily adapts to the shape of the workpiece and adheres to the side of circular cylinders.
  · The pad shape gains suction even on inclined suction surfaces.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Short-Type Pad (MU Flat Type) ZP2 Series

  SMC

  Space-saving in the height direction

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  4.5-Stage Bellows Pad ZP2 Series

  SMC

  [Features]
  · Suitable for suction of workpieces flowing at high speed
  · Suitable for workpieces of various shapes
  · Pad materials: silicone rubber (hardness: A40, A50 and A60)
  · Large opening size (short thread type) of ø5 to ø22, suitable for vacuum blower pumps with high suction flow rates.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Pad With Ball Spline Buffer (ZP2 Series / Flat Type)

  SMC

  A suction pad which uses a ball spline guide for the buffer.
  [Features]
  · Shape: flat.
  · Vacuum entry port direction: vertical.
  · Buffer stroke: 6 mm.
  · Buffer specification: ball spline.
  · Pad material: NBR, silicone rubber, urethane rubber, FKM, conductive NBR, conductive silicone rubber.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Sponge Pad ZP2 Series (Pad Single Unit / With Adapter)

  SMC

  Suction pads for suctioning workpieces with bumpy, uneven surfaces.
  [Features]
  · Type: pad single unit.
  · Pad type: sponge.
  · Pad materials: conductive silicone, conductive CR.
  · Pad outer diameter: ø4 mm, ø6 mm, ø8 mm.
  · Pad outer diameter: ø10 mm, ø15 mm.
  · With adapter / vacuum entry direction: vertical.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Vacuum Pads (flat type)

  MYOUTOKU

  Days to Ship:	12 Day(s) or more

• 

  Suction Cup Units Installation Attachments

  MISUMI

  [Features]·A vacuum pad attachment. ·The material of the vacuum pad attachment is brass.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Suction Cup Fittings Soft/Soft Bellows Type, Fixed Type Up: One-Touch (Shape K)

  MISUMI

  [Features]·A fixed type absorption holder, Upper: single-action type (K shape).

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

Loading...