Vacuum Tweezers, Manual Wands

• 

  Small Diaphragm Vacuum Pump, FV Series

  FURORO

  HEPA filters are used in the intake and exhaust parts for use in cleanrooms. *Excludes FV-10
  
  [Features]
  · Compact, high-vacuum pressure: The diaphragm is installed in a sealed place. Therefore, the product has structurally suited for reducing the pressure in multiple stages. The product also has a mechanism for achieving a high-vacuum pressure with its compact body design.
  · Long-life, maintenance-free: Low mechanical contact friction due to an electromagnetic driving force, requiring virtually no maintenance. A long-life type product that can be used up to the durability theoretical value of the diaphragm.
  · Clean discharge: The intake and exhaust parts are equipped with HEPA filters for use in cleanrooms. In addition, the filter can be seen through the transparent window attached to body, which makes it easy to judge the replacement period (excludes FV-10).
  · Quiet design: The enclosed body structure provides noiseless operation. In addition, in comparison to motorized types, quietness is maintained with no mechanical contact noise.
  · Flexible specification: No air compressor source is required. Therefore, it can be used anywhere—even with 100-V power plug. Furthermore, the applications can be expanded by using in combination with the manufacturer's Vacuum Tweezers.
  · Cost performance: Comprised from a simple structure. Therefore, compared to other equivalent vacuum pumps, it ensures value-added performance — reliability, life span, and power consumption. In addition, this product can also be offered at a competitive price.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Vacuum Tweezers, Conductivity, C Series

  FURORO

  Nylon resin containing carbon fiber (TORAYCA) which is excellent in conductivity is used for the vacuum pin set main body.
  *To use tweezers, one of the vacuum pumps "FV-10," "FV-30," "FV-60" and "FV-XP" (sold separately) is required.

  Days to Ship:	12 Day(s) or more

• 

  SUS Injection Attachment

  MIRUC OPTICAL

  The injection needle type attachment uses a stainless steel pipe with its suction surface polished and chamfered.
  It has a minimum hole diameter of ø0.1 that can handle ultra lightweight micro parts.
  When used in combination with the airflow adjustment screw on the air pit body, the removal of adsorbed materials will also be extremely smooth.
  There are straight type, 45° refraction type and suction port oval type.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Bernoulli Chuck, BC Series, Dedicated Stand (for Button Type)

  FURORO

  A dedicated stand for pick-and-pick-and-release vacuum tweezers. [Main Body Material]Conductive nylon

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Manual Tweezers, L Series

  FURORO

  Unlike metal tweezers, there is no risk that these tweezers will damage the wafer.
  
  [Features]
  · The wafer surface portion only comes into contact at two points, minimizing contamination of the wafer.
  · Unlike conventional metal tweezers, there is no risk that the tweezers will damage the wafer.
  · The use of a unique wafer stopper prevents extra contact with the wafer.
  · Because there are no adhesives or metals, etc. on the main body, it will naturally stay clean.
  · Materials can be selected to fit different applications.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Releasing Vacuum Tweezers

  FURORO

  Industry-first venting feature allows you to place a workpiece in a precise location without any impact.
  *To use these tweezers, you will need either "FV-W" vacuum pump for F007 or the "FV-W-Conductive" vacuum pump for C007 (sold separately). Check the website for details.

  Days to Ship:	8 Day(s) or more

• 

  Vacuum Release Tweezers, Application Cap (Pad)

  FURORO

  [Features]·An optional tip part (compatible cup) for pick-and-release vacuum tweezers

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Vacuum Release Tweezers, Application Nozzle

  FURORO

  A spare tip part for pick-and-release vacuum tweezers. [Features]Conductivity, chemical resistance, heat resistance, for minute objects

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Lever Lock - Manual Tweezers - Lever Lock Series/Lever Lock Series with Conductivity

  FURORO

  The lever-lock type, provides constant pinching force when locked for stable, consistent handling, vastly increasing work efficiency.

  Days to Ship:	12 Day(s) or more

• 

  Vacuum Tweezers - Tweezers Stand - Wall Mounted Type (Holder Conductive Nylon)

  FURORO

  It can be fixed with double-sided tape and M4 screws. [Main Body Material]Conductive nylon

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Vacuum Tweezers, Chemical Resistant, F Series, Shaft and Cap

  FURORO

  A cap for release vacuum tweezers
  
  [Features]
  · This is a spare tip part for release vacuum tweezers.

  Days to Ship:	12 Day(s) or more

• 

  Vacuum Tweezers - Tweezers Stand - Desktop Type (Acrylic)

  FURORO

  ·It can be fixed with double-sided tape and M4 screws. [Main Body Material]Acrylic

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Vacuum Tweezers, Conductive, C Series, Adhesion Chip for Wafers

  FURORO

  This adhesion chip contains carbon fibers with excellent chemical resistance, heat resistance, and resilience, and uses conductive PEEK resin. * For customers requiring bending (charges apply), please contact the VONA Support Center at 03-5805-7086.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Vacuum Tweezers - Conductive C Series - Shaft and Cap

  FURORO

  A cap for pick-and-release vacuum tweezers. [Applications] For wafer transfer

  Days to Ship:	12 Day(s) or more

• 

  Vacuum Tweezers Conductive C Series Conductive PVC Tubes

  FURORO

  Connection tube for pick-and-release vacuum tweezers. [Applications] For wafer transfer

  Days to Ship:	8 Day(s) or more

• 

  Vacuum Tweezers, Conductive C Series Conductive Spiral Tube

  FURORO

  ---The connection tube for vacuum release tweezers
  
  [Features]
  • Nylon resin containing carbon fiber (TORAYCA) for its superior physical properties and conductivity is used for the vacuum tweezer body.
  • Moreover, the inner valve is made of fluororesin, and the perimeter is covered with nylon containing carbon fiber utilizing a special forming method with no loss of air-tightness.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Vacuum Tweezers - Conductive Tweezers Stand - Desktop Type

  FURORO

  All parts are conductive. Can be fixed with dual-sided tape (conductive) and M4 screws.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Vacuum Tweezers, Conductive Tweezers Stand, Wall-Mounted Type

  FURORO

  All parts are conductive. Can be fixed with dual-sided tape (conductive) and M4 screws.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Tabletop Stand, for Manual Tweezers

  FURORO

  A dedicated stand for pick-and-pick-and-release vacuum tweezers. [Applications]Wafer transfer

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Air Pit Main Body (Ptype)

  MIRUC OPTICAL

  Easy and comfortable pen tip operation. You can catch and release without touching with your fingers.
  [Features]
  ・ Adsorption and transportation by operating the pen tip. Combining from a full lineup realizes comfortable handling and efficient work environment

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Air Pit Body (N/O Type)

  MIRUC OPTICAL

  Easy and comfortable pen tip operation. You can catch and release without touching with your fingers.
  [Features]
  ・ Adsorption and transportation by operating the pen tip. Combining from a full lineup realizes comfortable handling and efficient work environment

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Standard Tip Attachment (Metal)

  MIRUC OPTICAL

  A wide variety of standard tip attachments are available with 3 types of materials and 17 types of hole diameters, and they can be used for adsorption of all minute parts such as spherical, bar-shaped, flat plate, and washers.
  There are features for each material, and you can choose a product that suits your purpose and application.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Stand AP-ST

  MIRUC OPTICAL

  ·Miruc Optical stand. ·Convenient clip on both sides

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

Loading...