Oil Gauges（Body Material：Plastic）

• 

  Long Oil Gauge, General Use, Acrylic, KLA-A・KLA-B

  KYOWA

  [Features]
  ・ KLA type is a simple oil gauge that uses heat-resistant improved methacrylic resin for the main body. Besides, it looks very deluxe in external appearance
  ・ The transparency of the main body is very good, and the white printing on the back side and the built-in float make it possible to reliably read the oil surface
  ・ KLA type is a general oil gauge, not for heat resistance, chemical resistance, or pressure resistance

  Days to Ship:	14 Day(s) or more

• 

  Level Indicator (LR, LT)

  IMAO CORPORATION

  [Features]
  • Oil is injected into the indicator through two bolts.
  • Resin material has high impact strength and no discoloration under light. Moreover, it is also resistant to general chemicals including oils.
  • As the front is curved, the characters are easy to read thanks to the lens effect and can be read even from the side.
  
  • The level plate can be removed so max. and min. can be printed on after purchase.
  • Fully sealed to prevent oil leaks.
  • Includes SUS manufactured bolts and nuts. Includes stainless steel for bolts and nuts
  

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Long Oil Gauge, General-Purpose, KL・KL2

  KYOWA

  [Features]
  ・ KL type oil gauge uses special synthetic resin for mounting bolt and set part
  ・ The oil window part is made of transparent resin that is strong in impact resistance and has little load deformation
  ・ The mounting bolt / set part and the oil window part are joined with a connection bar
  ・ When installing the oil gauge, it can be sealed only by the mounting packing, and the installation is easy
  ・ The KL and KL2 type reflectors have red scales on a white background, and the back side of the oil window is printed in white
  ・ Not only check the amount of oil, but also do not miss the detailed symptoms of oil
  ・ Pressure resistance is 0.5 to 0.8 MPa, heat resistance is 90°C
  ・ The KL2 type is the same as the KL type, except for the indicator lines on the reflector, same as for the pitch and other dimensions

  Days to Ship:	Same day or more

• 

  Oil Level Gauge, N Type

  MUSASHI OILSEAL

  Allows you to accurately check oil and fluid surface levels in oil tanks and gear boxes. Provides oil resistance, heat resistance, pressure resistance, and airtightness, and is used in a wide range of applications.

  Days to Ship:	1 Day(s) or more

• 

  Long Oil Gauge - General Purpose Nylon Made - KLA-SN

  KYOWA

  [Features]
  ・ The KLA-SN type is an oil gauge for molded products that uses a transparent polyamide resin for the main body
  ・ It has the same function as KLA-A type (acrylic resin product), and it is cheap in terms of cost
  ・ The transparency of the body is good, and the white printing on the back and the built-in float ensure that the oil surface can be read

  Days to Ship:	16 Day(s) or more

• 

  O-Type (Screw Clamp Type) Standard

  KOHO INDUSTRIAL

  [Features]
  ▪ The transparent main body is made from an ultra-hard synthetic resin. It will not break no matter how hard it is struck.
  · The reflector does not get dirty because it repels oil.
  · The white reflector makes the oil volume line clearly visible even in slightly dark places.
  · About 100°C for heat.

  Days to Ship:	16 Day(s) or more

• 

  New O-Type (fasten with screws Type) Deluxe

  KOHO INDUSTRIAL

  [Features]
  ▪ The transparent main body is made from an ultra-hard synthetic resin. It will not break no matter how hard it is struck.
  · The reflector does not get dirty because it repels oil.
  · The white reflector makes the oil volume line is clearly visible even in slightly dark places.
  · About 100°C for heat.

  Days to Ship:	10 Day(s) or more

• 

  Oil-Level Gauge, A Type

  MUSASHI OILSEAL

  Allows you to accurately check oil and fluid surface levels in oil tanks and gear boxes. Provides oil resistance, heat resistance, pressure resistance, and airtightness, and is used in a wide range of applications.

  Days to Ship:	14 Day(s) or more

• 

  Long Oil Gauge for Standard Pipes, KLPC-N, without Indicating Line

  KYOWA

  [Features]
  ・ The KLPC-N type oil gauge is a series with no vertical red line printed on the KLPC type liquid level gauge
  ・ The main body is made of heat-resistant reinforced resin and the operating temperature is 100°C
  ・ Since the liquid level gauge is sealed and connected only by the O-ring, it can cover some deviations in the mounting pitch
  ・ Fewer parts, easy to install and replace
  ・ The mounting length can be freely changed by changing the length of the pipe
  ・ You can put multiple indicator lines on the pipe
  ・ The standard pipe is made of polycarbonate resin, but it can be made of acrylic resin, PSF resin, etc., according to the application
  ・ Large see-through angle allows you to see the oil level even from the side
  ・ You can easily clean the dirt inside by simply removing the gauge
  ・ Black is standard for floats, but red is also available
  ・ Pressure resistance is 0.3 MPa

  Days to Ship:	14 Day(s) or more

• 

  Level Indicator (LR-E, LR-P, LT-P)

  IMAO CORPORATION

  The LR-E type comes with a level sensor that can automatically control the amount of oil, while the LR-P and LT-P types feature a protector to help mitigate damage caused by impacts.
  
  [Features]
  · LR-E: with sensor.
  · LR-P: with protector.
  · LT-P: with protector and thermometer.
  · Oil is injected into the indicator through two bolts.
  · Resin material has a high impact strength and will not discolor under light.
  · Moreover, it also features resistance against common types of chemical, including oil based types.
  · Since the dial can be removed, 'max' and 'min' can be printed on after purchase.
  · The lens effect generated by the curved front makes the characters/letters easy to read, even from the side.
  · Is completely sealed, ensuring no oil is able to leak out.

  CAD ：

  2D / 3D

  Days to Ship:	Same day

• 

  M Type, Red Circle (Hiromaru) (Screw Retention Type)

  KOHO INDUSTRIAL

  The main body is made from a special ultra-hard synthetic resin that resists damage from any kind of shock. The reflector repels oil so there is no need to worry about the reflector being dirtied by oil. Easy to remove and clean if impurities enter from the oil inlet/outlet.

  Days to Ship:	14 Day(s) or more

• 

  Column Type, Level Indicator

  IMAO CORPORATION

  [Features]
  · The heat resistant glass tube is protected by a transparent protector made from polycarbonate.
  · Liquid is injected to the indicator through two bolts.
  · Reading from the side is possible even in a state where the interior is filled with liquid.
  · No liquid leakage due to complete seal.
  · CLR-SUS can be used for either water or glycol-based aqueous solution (50%).

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  N Type, Red Circle (Screw-in Type)

  KOHO INDUSTRIAL

  [Features].
  ・The N-type red circle (Hinomaru) is a high speed machine with intense oil foaming.
  ・The N-type no reflector board lets you view the interior.
  ・The transparent main does not; itis an ultra-hard special compound resin and does not break with any kind of shock.
  · The reflector is white and the rising sun flag is visible even in slightly dark places.
  · The reflector has oil repelling properties, so there is no need to worry about oil contamination.
  ・Attaching and removing the mounting is extremely simple and in the unlikely event that the reflector board gets dirty, the main unit can be simply removed and cleaned at any time.
  ・For heat, it is approximately 100°C .

  Days to Ship:	1 Day(s) or more

• 

  W Type, Red Circle (Hiromaru) (Drive-In)

  KOHO INDUSTRIAL

  [Features]
  · The transparent main body is made from an ultra-hard synthetic resin. It will not break no matter how hard it is struck.
  · The reflector is white and the red line and rising sun flag are visible even in slightly dark places.
  · The reflector is oil-repelling, so there is no risk of oil contamination.
  · Cleaning can be performed at any time during removal and mounting.

  Days to Ship:	16 Day(s) or more

• 

  Round Oil Gauge for General Use, Drive-In (Press-Fit) Type KC・KCM Type

  KYOWA

  [Features]
  ・ The residual oil is automatically guided to the outside of the oil gauge, eliminating the illusion of residual oil and preventing oil shortage
  ・ The reflector set inside the oil gauge is white
  ・ The gauge room is bright and you can check the presence of oil from a distance

  Days to Ship:	12 Day(s) or more

• 

  Long Oil Gauge for Standard Pipes, KLP

  KYOWA

  The body of the oil gauge itself serves as a seal.
  [Features]
  ・ Sealed automatically without sealing
  ・ There are few parts, and anyone can easily install and replace them
  ・ By changing the pipe, the length is freely changed
  ・ Large see-through angle allows you to see the oil level even from the side
  ・ You can also clean the inside dirt just by removing the bolts
  ・ Contains a float
  ・ Pressure resistance is 0.2 MPa

  Days to Ship:	38 Day(s) or more

• 

  V Type, HL (Drive-In)

  KOHO INDUSTRIAL

  The transparent main body is made from an ultra-hard synthetic resin. It will not break no matter how hard it is struck.

  Days to Ship:	16 Day(s) or more

• 

  Star-Shaped Window (FG-N, FE)

  IMAO CORPORATION

  [Features]
  · Features a star shaped aluminum plate within that allows for easier confirmation of the volume of oil.
  · Screw-in mounting.

  • STOCK

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  K Type, H Type (Screw Retention Type)

  KOHO INDUSTRIAL

  The main body is made from a special ultra-hard synthetic resin that resists damage from any kind of shock. Oil level is displayed clearly, thanks to white reflector and the red line that is visible in low light. The reflection plate repels oil and does not become dirty.

  Days to Ship:	1 Day(s)

• 

  SP Type (Screw Retaining)

  KOHO INDUSTRIAL

  The main body is made from a special ultra-hard synthetic resin that resists damage from any kind of shock. The reflector is white and the red line is visible even in rather dark areas, so the oil level is displayed clearly. The reflection plate repels oil and resists becoming dirtied by it.

  Days to Ship:	1 Day(s) or more

• 

  Round Oil Gauge for General Use, Drive-In (Press-Fit) Type KD・KDM Type

  KYOWA

  [Features]
  ・ The residual oil is automatically guided to the outside of the oil gauge, eliminating the illusion of residual oil and preventing oil shortage
  ・ The reflector set inside the oil gauge is white
  ・ The gauge room is bright and you can check the presence of oil from a distance

  Days to Ship:	12 Day(s) or more

• 

  Round Oil Gauge with General-Use Screw

  KYOWA

  This screw-in product has an O-ring for sealing element. The main body is highly resistant to impact and is made of a special resin which has excellent transparency.
  A residual oil guide element is built into the oil gauge, and accurately informs the user when the device is out of oil.
  
  [Features]
  - Like other round oil gauges, the KMS type oil gauge with screw has a built-in guide element, so it is able to accurately inform the user when the device is out of oil.
  - KMS is a screw-in product with an O-ring for sealing element.
  - As a result the device can be installed and removed easily and can be cleaned immediately when it becomes dirty inside.
  - The KIS-2 does not include a reflector.
  - Flat packing is also available.
  - Please indicate if flat packing is required.

  Days to Ship:	12 Day(s) or more

• 

  Heat Resistant/Chemical Resistant, Oil Gauge, with Round Screws, KMH Type

  KYOWA

  The product can endure constant temperatures of 135°C thanks to adoption of heat resistant reinforced resin. It is also superior in chemical resistance (such as against operational oil, water glycol, and phosphoric acid ester). The seal part is made of heat resistant rubber, and the gauge window of heat-resistant tempered glass.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  M Type, HL (Fastening Screw Type)

  KOHO INDUSTRIAL

  The main body is made from a special ultra-hard synthetic resin that resists damage from any kind of shock. The reflector repels oil so there is no need to worry about the reflector being dirtied by oil. Easy to remove and clean even if impurities enter from the oil inlet/outlet.

  Days to Ship:	16 Day(s) or more

• 

  KP / KS (Screw Type)

  KOHO INDUSTRIAL

  As the reflector repels oil, there is no need to worry about the reflector being dirtied by oil.
  Easy to remove and clean even if impurities enter from the oil inlet/outlet.
  
  [Features]
  The transparent main body is made from ultra-hard synthetic resin. It will not break no matter how hard it is struck.
  Since the reflector is white and the red line is visible even in rather dark areas, the oil level is displayed clearly.
  · The reflector has oil repelling properties, so there is no concern about oil contamination.
  · Because the window and the reflector come off easily just by removing the top and bottom screws, even if products that are difficult to install/remove are soiled, they can be cleaned anytime.
  · About 100°C for heating.
  · Easy to install just by drilling screw holes in line with the top and bottom holes (with mounting screw at the center), and tightening the top and bottom screws.
  · Do not overtighten the screws while installing. (Tightening torque: Approximately 15 kgf/cm).

  Days to Ship:	1 Day(s)

• 

  Long Oil Gauge, General Use, KDL・KDL2

  KYOWA

  [Features]
  ・ KDL type and KDL2 type oil gauges use heat resistant reinforced resin for mounting bolts and set parts
  ・ The oil window part is made of transparent resin that is strong in impact resistance and has little load deformation
  ・ The mounting bolt / set part and the oil window part are joined with a connection bar
  ・ When installing the oil gauge, it can be sealed only by the mounting packing, and the installation is easy
  ・ Compared to the KL type, the KDL type has a wider oil window and the oil surface is easier to see
  ・ The reflector has a red scale on a white background, and the back side of the oil window is printed in white
  ・ Not only check the amount of oil, but also do not miss the detailed symptoms of oil
  ・ The KDL type can be easily disassembled and assembled, and the internal maintenance is easy
  ・ Pressure resistance is 0.5 to 0.8 MPa, heat resistance is 100°C
  ・ The KDL2 type is also the same as the KL2 type, but the mounting pitch and all others are the same as the KDL type except for the scale lines on the reflector

  Days to Ship:	12 Day(s)

• 

  Long Heat-Resistant Chemical-Resistant Oil Gauge KHR-A, KHR-A2

  KYOWA

  [Features]
  ・ KHR-A type and KHR-A2 type have excellent heat resistance and chemical resistance like KMH type
  ・ The main body uses heat-resistant reinforced resin and has a constant heat resistance of 120°C
  ・ Excellent in oil resistance and chemical resistance (hydraulic oil, water glycol, phosphate ester hydraulic oil, etc.)
  ・ Heat-resistant rubber (fluoroelastomer) is used for the seal, heat-resistant reinforced glass (Pyrex) is used for the oil window, and a metal plate is used for the reflector, so you can clearly check the oil for a long time
  ・ The KHR-A2 type liquid level gauge has a float to make it easier to see the oil level
  ・ This product is compact and easy to install
  ・ Pressure resistance is 1 MPa

  Days to Ship:	1 Day(s) or more

• 

  Spray Type (Screw Retention Type)

  KOHO INDUSTRIAL

  With this product, oil is sprayed out from a central spray aperture at machine startup, allowing a visual check of the condition of lubricant oil in the machine. The transparent main body is made from an ultra-hard synthetic resin. It will not break no matter how hard it is struck.

  Days to Ship:	8 Day(s) or more

• 

  Circular Window (CD)

  IMAO CORPORATION

  A special, transparent, dome-shaped resin oil-level inspection window. The oil volume can be checked from all directions.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Prismatic Type Window (PRS, PRSH)

  IMAO CORPORATION

  You can check the oil level immediately using the prismatic gauge window.
  
  [Features]
  · The gauge window has a prism design in which the oil level can be immediately and clearly checked.
  · The PRSH type is resistant towards alcohol-based chemicals.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  V Type, Red Circle (Hiromaru) (Drive-In)

  KOHO INDUSTRIAL

  The transparent main body is made from an ultra-hard synthetic resin. It will not break no matter how hard it is struck.

  Days to Ship:	16 Day(s) or more

• 

  General Purpose KP-Type Round Oil Gauge

  KYOWA

  [Features]
  ・ An "oil window" is used so that you can see the amount of oil in the machine's crank chamber or gears and at the same time see the situation in the tank
  ・ This product, KP type, is a product that consists of only two parts, but it fulfills its purpose and is used in many small oil gauges
  ・ The manufacturers is convinced that the low price will greatly contribute to the cost reduction of the manufactured products

  Days to Ship:	22 Day(s) or more

• 

  Round General Use Oil Gauge, KB and KB-HL Types

  KYOWA

  [Features]
  ・ ＜KB type＞
  ・ This product is all integrated production
  ・ The rubber wrapping around the oil gauge is made of urethane and is made by an automatic machine with a double molding method
  ・ Regarding the internal structure, like the KC and KD types, the oil induction part K acts
  ・ The urethane resin has high heat resistance
  ・ As a result, the operating temperature is 90°C
  ＜KB-HL type＞
  ・ The KB-HL type is the same as the KB type except for the reflector, which has the same outside diameter, width, and other dimensions

  Days to Ship:	12 Day(s) or more

• 

  General Purpose Round Oil Gauge KF Type (Flange Type)

  KYOWA

  [Features]
  ・ Parts of the conventional oil gauge tightened with bolts were disjointed, but each part was collected and finished compactly
  ・ Easy to install with only 4 bolts, and after installation it makes the machine very deluxe

  Days to Ship:	14 Day(s) or more

• 

  Round Oil Gauge, General Purpose, Screw Type, KDS Type

  KYOWA

  [Features]
  ・ Since the mounting bolt itself acts as an oil circulation, it can be easily mounted by processing 2 (or 4) threads on the product body to be used
  ・ KDS type cover can be easily removed
  ・ Even with the oil gauge body attached, you can clean the inside just by removing the cover
  ・ The reflector is printed in red on a white background with H and L lines, so you can check not only the amount of oil but also the minute changes in oil

  Days to Ship:	12 Day(s) or more

• 

  General-Purpose Round Oil Gauge, Spray

  KYOWA

  [Features]
  · When starting the machine, oil is discharged from the jet nozzle placed in the middle, and the lubrication inside the machinery can be visually checked.
  ▪ The product can be mounted and removed with a single nozzle screw.
  · If there are any impurities in the oil window, the entire unit can be easily removed and cleaned.

  Days to Ship:	14 Day(s) or more

• 

  Round Oil Gauge with Included Standard Oil Filler Opening

  KYOWA

  [Features]
  ・ Easy to install. Simply remove the lid to top-up the oil. Moreover, since there is a gauge bar inside, you can know the amount of oil accurately
  ・ By turning the lid a little, you can freely open and close the air vent
  ・ Even if the inside is dirty, you can easily clean it
  ・ The body uses heat-resistant transparent resin with excellent oil resistance, heat resistance, and impact resistance

  Days to Ship:	14 Day(s) or more

• 

  Long Oil Gauge for Standard Pipes, L, KLL

  KYOWA

  The body of the oil gauge itself, like the KLP type, acts as a seal.
  [Features]
  ・ Sealed automatically without sealing
  ・ There are few parts, and anyone can easily install and replace them
  ・ Large see-through angle allows you to see the oil level even from the side
  ・ You can also clean the inside dirt just by removing the bolts
  ・ The guide holding the tip of the cage can be installed by making a hole in 1 place
  ・ Air can be circulated in the cage just by attaching the cap on the tip
  ・ The mounting bolt acts as a stopper. When you tighten it until it stops, it will automatically seal and there will be no oil leakage
  ・ Contains a float

  Days to Ship:	14 Day(s) or more

• 

  M Type, One Indicator Line (Screw-In)

  KOHO INDUSTRIAL

  The main body is made from a special ultra-hard synthetic resin that resists damage from any kind of shock. The reflector has oil repelling properties, so there is no need to worry about it being dirtied by oil. Easy to remove and clean even if impurities enter from the oil inlet/outlet.

  Days to Ship:	9 Day(s) or more

• 

  N Type, without Reflector (Threaded Type)

  KOHO INDUSTRIAL

  [Features]
  • Please use the N type red circle (Hinomaru) with high-speed machines prone to severe oil foaming.
  • Use the reflector-less N type if you wish to be able to view inside.
  · The transparent main body is made from an ultra-hard synthetic resin. As such, it will not break, no matter how hard it is struck.
  • The reflector is white, ensuring that the red circle (Hinomaru) symbol is visible even in low light.
  • The reflector has oil repelling properties, so you don't need to worry about oil staining/contamination.
  • Extremely easy mounting and removal, so, even if the reflector gets dirty, the body can be removed and cleaned at any time.
  • Able to cope with heat up to 100°C.

  Days to Ship:	1 Day(s)

• 

  V Type, No Reflector Panel (Drive-In)

  KOHO INDUSTRIAL

  The transparent main body is made from an ultra-hard synthetic resin. It will not break no matter how hard it is struck.

  Days to Ship:	13 Day(s) or more

• 

  W Type, Two Indicator Lines (Drive-In)

  KOHO INDUSTRIAL

  [Features]
  · The transparent main body is made from an ultra-hard synthetic resin, which resistant to breaking and impact damage.
  · The reflector is white. Hence, the red lines and the Japanese flag are visible in low-level light.
  · The reflector has oil repelling properties, which alleviates the risk of oil contamination.
  · Easy to attach/detach, which makes it easier to clean the reflector by simply removing it from the main body.
  · Heat-resistant to approx. 100°C.

  Days to Ship:	16 Day(s) or more

Loading...