Material Plates（Page2）

• 

  Ketron GF30 PEEK Sheet

  QUADRANT POLYPENCO JAPAN

  [Note] For products weighing 30 kg or more, please confirm receiving heavy deliveries.

  • Volume Discount

  Days to Ship:	18 Day(s) or more

• 

  Duratron T4203 PAI Sheet

  QUADRANT POLYPENCO JAPAN

  [Features]
  · Duratron® PAI is a material that is extruded / compression-molded from polyamide-imide (PAI) resin. A super engineering plastic with a continuous operating temperature of 250°C.

  Days to Ship:	20 Day(s) or more

• 

  Semitron ESd420 PEI Sheet

  QUADRANT POLYPENCO JAPAN

  Semitron® is a permanent antistatic, high-tech material. Seven different types of base polymers are available to cover a wide range of temperatures.

  Days to Ship:	20 Day(s) or more

• 

  Skived Tape

  CHUKOH

  Thinly cut fluororesin (PTFE) film. Used for mold-release applications during ACF crimping, electric insulation, etc.
  
  [Features]
  · Thin cut PTFE film.
  · Available in a wide variety of widths and thicknesses.
  · Used for mold-release applications during ACF crimping, electric insulation, and OA equipment sliding applications.
  · Production of adhesive-processed products is also possible.

  Days to Ship:	9 Day(s) or more

• 

  Cast Nylon NB Sheet

  MITSUBOSHI BELTING

  Polyacetal is a resin material with excellent general mechanical properties (1. Low friction coefficient. 2. Self-lubricating with good abrasion resistance. 3. High rigidity and elasticity). It is resistant to organic solvents. Available in a lineup of t = 5–50-mm plates.

  Days to Ship:	13 Day(s) or more

• 

  TOMBO No.9001 NAFLON PTFE Tape

  NICHIAS

  · A fluororesin (PTFE) tape.
  · Recommended for motors and insulating materials used at high temperatures thanks to its excellent electric properties, non-adhesiveness, and low coefficient of friction.

  Days to Ship:	9 Day(s) or more

• 

  Acrylic Cast Sheet (TS Sheet), Transparent / Milky White Semi-Transparent

  HIKARI

  Uses an acrylic plate manufactured by Sumitomo Chemical Co., Ltd. (Plate thickness: 2 mm, 3 mm and 5 mm). Available in plate size: approx. 3 ft × 6 ft.
  *Quantity: Available in single or multiple quantities.
  
  [Features]
  · This material has the highest transparency of known plastic materials.
  · Lighter than glass with the same transparency and surface gloss.
  · One of the few plastics that can withstand severe conditions such as outdoor use and lighting.
  · Optimal for machining such as drilling, cutting, engraving, and printing, etc.

  Days to Ship:	9 Day(s) or more

• 

  Polyca-Ace

  HIKARI

  Available in four polycarbonate (PC) plate sizes (t = 2 mm, 3 mm). Color: smoky brown and transparent.
  *Quantity: Available in single or multiple quantities.

  Days to Ship:	9 Day(s) or more

• 

  Styrol Resin Sheet (Containing UV Agent) Glass Mat

  HIKARI

  Matte glass surface finish. The surface can be wiped clean. Stronger in high-temperature, high-humidity environments, such as bathrooms, etc., compared to other plastics. Almost no warping occurs due to moisture absorption.
  *Available in single or multiple quantities.

  Days to Ship:	9 Day(s) or more

• 

  Sumi-Holiday (Acrylic Sheet)

  HIKARI

  Available in different color variations.
  
  [Features]
  · Can be sorted according to the color of the labels.
  · Fast stock checking and customer response.
  · The actual color of Sumiholiday may differ to the color shown in the images.

  Days to Ship:	2 Day(s) or more

• 

  PET-Resin Ace

  HIKARI

  PET material (plate thickness: 0.5 mm, 1.0 mm, 1.5 mm, 2.0 mm, and 3.0 mm) available in three colors (white, smoky brown, transparent)
  *Quantity: Available in single or multiple quantities.

  Days to Ship:	9 Day(s) or more

• 

  Polyplate (Polyethylene Plate)

  HIKARI

  *Quantity: Available in single or multiple quantities.
  
  [Features]
  ･ A low-density, lightweight foam.
  · Polyethylene — water-resistant.
  · Easy to cut with a utility knife.
  · Polyethylene material — recyclable.
  · Excellent printability and adhesion due to corona discharge processing.

  Days to Ship:	9 Day(s) or more

• 

  Acrylic Block Flat Sheet

  HIKARI

  Available in small size.
  *Quantity: Available in single or multiple quantities.

  Days to Ship:	9 Day(s) or more

• 

  Acrylic Cast Sheet (TS Sheet)

  HIKARI

  Uses an acrylic plate manufactured by Sumitomo Chemical Co., Ltd. (Plate thickness: 2 mm, 3 mm and 5 mm). Available in plate size: 3 ft × 6 ft.
  *Quantity: Available in single or multiple quantities.
  
  [Features]
  · This material has the highest transparency of known plastic materials.
  · Lighter than glass with the same transparency and surface gloss.
  · One of the few plastics that can withstand severe conditions such as outdoor use and lighting.
  · Optimal for machining such as drilling, cutting, engraving, and printing, etc.
  · Although this material is resistant to the effects of alcohol-based chemicals, the penetration of adhesive processing related solvents (adhesive solutions) differs to that of the extruded plate. Therefore, caution is necessary.

  Days to Ship:	9 Day(s) or more

• 

  Sumi-Holiday (Acrylic Sheet)

  HIKARI

  Acrylic material (colored, non-transparent). Available in different sizes from small (180 × 160 mm) to large (1,300 × 1,100 mm).
  
  [Features]
  · Can be sorted according to the color of the labels.
  · Fast stock checking and customer response.
  · The actual color of Sumiholiday may differ to the color shown in the images.

  Days to Ship:	2 Day(s) or more

• 

  Uni-Sunday (PVC Sheet)

  HIKARI

  Handles various color combinations.
  *Quantity: Can be ordered in any quantity from 1.
  
  [Features]
  · Can be sorted by label color.
  · It allows fast inventory searches and customer support.
  · Actual color of UniSunday may look different from the color shown in a picture.

  Days to Ship:	9 Day(s) or more

• 

  Styrene Resin Plate (UV Agent Included) Transparent Mat

  HIKARI

  Styrene resin plate with UV agent included, featuring excellent weather resistance.
  [Features]
  · The surface can be wiped clean.
  · Compared to other plastics, is resistant to high-temperature and high-humidity environments such as bathrooms with very little warping from moisture absorption.
  · Can be used as a substitute for glass.
  [Applications]
  · Partitions, door panels, can be used as a substitute or replacement for glass.

  Days to Ship:	9 Day(s) or more

• 

  Acrylic Plate EA440DV-23

  ESCO

  【Product Specifications】
  ・For board, light, display, showcase, sign, lens, and carport
  ・Dim.…320 x 545mm
  ・Thickness…2mm
  ・Color…White

  Days to Ship:	9 Day(s) or more

Loading...