Punches（Shank type：Single-stepped）

• 

  Shoulder Punches

  MISUMI

  -The most versatile punch for punching.
  ・You can choose from 3 types of materials: die steel, high speed steel, and powder high speed steel.
  ・There is also a Jector Punch that has a scrap removal pin built into the punch to prevent scrap removal.

  • FLANGE
  • SKH51
  • SKD11
  • POWDER HSS

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Jector Punches

  MISUMI

  Shoulder punch A punch with a kicker pin built into the inside for removing scraps.
  ・If you want to strengthen the scum removal force, please use the "spring reinforced type".
  ・There is also a "large pin diameter type" in which the pin for scrap removal is larger than usual.

  • Volume Discount

  • FLANGE
  • SKH51
  • SKD11
  • POWDER HSS

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s) or more

• 

  Jector Punches TiCN Coating

  MISUMI

  ・A highly durable product that suppresses cutting edge wear and reduces maintenance man-hours and total costs.
  ・Added die steel lineup and cutting edge length X type.
  ・If you want to strengthen the scum removal force, please use the "spring reinforced type".
  
  [What is TiCN coating]
  ・TiCN is a coating widely used in press molds. Improved punch life can be expected by increasing the wear resistance of the cutting edge.
  ・By reviewing the surface treatment, it is possible to reduce maintenance man-hours and total costs.

  • FLANGE
  • POWDER HSS
  • TiCN

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Shoulder Punches Quill type, Normal, Lapping, TiCN Coating, HW Coating

  MISUMI

  shoulder punch for punching small holes. For shaft diameter D1.6-2.5, there are two types of brim thickness to choose from: 3mm and 5mm. We also support various surface treatments such as lapping and TiCN.

  • FLANGE
  • SKH51
  • POWDER HSS
  • TiCN
  • HW

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Key Flat Shank Shoulder Punches Normal, TiCN Coating

  MISUMI

  A shoulder punch with a flat surface on the shank to prevent rotation. You can choose between a normal type with no coating and a TiCN coating with improved wear resistance.

  • FLANGE
  • SKH51
  • SKD11
  • POWDER HSS
  • TiCN

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Shoulder Punches Dicoat treatment

  MISUMI

  ・This punch has been treated with dicoat treatment (TD treatment) to improve the wear resistance of the punch cutting edge.
  ・There is also a Jector Punch that has a scrap removal pin built into the punch to prevent scrap removal.

  • FLANGE
  • SKD11
  • POWDER HSS
  • DICOAT

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Shoulder Punches, HW Coating

  MISUMI

  ・A highly durable product that suppresses cutting edge wear and reduces maintenance man-hours and total costs.
  ・Added die steel lineup and cutting edge length X type.
  ・There is also a Jector Punch that has a scrap removal pin built into the punch to prevent scrap removal.
  
  [What is HW coating]
  ・It is a coating that improves the adhesion of the TiCN film by applying WPC treatment to the base of the TiCN coating.
  Since the coating film is less likely to peel off, the life of the punch can be expected to be longer than that of conventional TiCN.
  ・By reviewing the surface treatment, it is possible to reduce maintenance man-hours and total costs.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Shoulder Punches RW Coating

  MISUMI

  ・A highly durable product that suppresses cutting edge wear and reduces maintenance man-hours and total costs.
  ・Added die steel lineup and cutting edge length X type.
  ・There is also a Jector Punch that has a scrap removal pin built into the punch to prevent scrap removal.
  [What is RW coating]
  ・It is a coating with higher hardness and higher heat resistance than TiCN. Furthermore, WPC treatment is applied to the base to strengthen the adhesion of the coating film.
  ・Compared to TiCN・HW, it can be expected to have a significantly longer punch life and contribute to reducing mold maintenance costs.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Shoulder Punches Lapping

  MISUMI

  shoulder punch with a lap finish on the cutting edge. Improves sliding properties, seizure resistance, and adhesion resistance.

  • FLANGE
  • SKH51
  • POWDER HSS

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s) or more

• 

  Shoulder Punches Short type, Normal, TiCN Coating

  MISUMI

  A shoulder punch with a shorter overall length than usual. By reducing the connecting radius between the cutting edge and the shaft, the cutting edge length and punch holding margin are secured with a short length.

  • FLANGE
  • SKH51
  • SKD11
  • POWDER HSS
  • TiCN

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Key Flat Shank Jector Punches Normal, TiCN Coating

  MISUMI

  A jetter punch with a flat surface on the shank to prevent rotation. You can choose between a normal type with no coating and a TiCN coating with improved wear resistance.

  • FLANGE
  • SKH51
  • SKD11
  • POWDER HSS
  • TiCN

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Mini Punches

  MISUMI

  This punch is useful when drilling multiple holes in relatively thin material.

  • FLANGE
  • SKH51

  CAD ：

  2D / 3D

  Days to Ship:	17 Day(s) or more

• 

  Shoulder Punches -DLC Coating-

  MISUMI

  We have added die steel lineup and cutting edge length X type!
  
  ・The biggest feature is the low coefficient of friction compared to other coated punches. Because there is less friction between the punch cutting edge and the workpiece (workpiece material), it is effective in piercing aluminum materials, where chips during punching tend to be a problem.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Jector Punches, WPC treatment

  MISUMI

  This is a jetter punch that has been treated with WPCⓇ. Excellent fatigue strength, seizure resistance, and wear resistance.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Shoulder Punches-NW Coating(DLC Coating+WPC®Treatment)

  MISUMI

  We have added die steel lineup and cutting edge length X type!
  
  ・The biggest feature is the low coefficient of friction compared to other coated punches. Because there is less friction between the punch cutting edge and the workpiece (workpiece material), it is effective in piercing aluminum materials, where chips during punching tend to be a problem.
  ・In addition to the regular DLC coating, this punch has been treated with WPC on the base to improve the adhesion of the coating film.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Shoulder Punches, WPC treatment

  MISUMI

  shoulder punch that has been treated with WPCⓇ. Excellent fatigue strength, seizure resistance, and wear resistance.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Jector Punches Dicoat treatment

  MISUMI

  ・This is a punch with improved wear resistance of the punch edge by applying dicoat treatment (TD treatment) to the jetta punch.
  ・If you want to strengthen the scum removal force, please use the "spring reinforced type".

  • FLANGE
  • SKD11
  • POWDER HSS
  • DICOAT

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Jector Punches Lapping

  MISUMI

  This is a jetter punch with a lap finish on the cutting edge. Improves sliding properties, seizure resistance, and adhesion resistance.

  • FLANGE
  • SKH51
  • SKD11
  • POWDER HSS

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s) or more

• 

  Jector Punches Configurable full length, Fixed B type, Normal, WPC treatment

  MISUMI

  ・This is a jetter punch that keeps the cutting edge length (B dimension) constant for any given overall length (L dimension).
  ・If you want to strengthen the scum removal force, please use the "spring reinforced type".
  - Since there is no side hole in the shank of the punch, you can use it as an air blow punch by removing the kicker pin.

  • FLANGE
  • SKH51
  • SKD11
  • WPC

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Key Flat Shank Shoulder Punches WPC treatment, HW Coating

  MISUMI

  This punch is a shoulder punch with a flat surface on the shank to prevent rotation, and has been treated with WPC®, a type of precision shot peening, to improve fatigue strength and the adhesion of the TiCN coating.

  • FLANGE
  • SKH51
  • SKD11
  • POWDER HSS
  • HW
  • WPC

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Jector Punches -NW Coating(DLC Coating+WPC® Treatment)-

  MISUMI

  We have added die steel lineup and cutting edge length X type!
  
  ・The biggest feature is the low coefficient of friction compared to other coated punches. Because there is less friction between the punch cutting edge and the workpiece (workpiece material), it is effective in piercing aluminum materials, where chips during punching tend to be a problem.
  ・In addition to the regular DLC coating, this punch has WPC treatment applied to the base to improve the adhesion of the coating film.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Jector Punches Normal and Lapping with Large Diameter Pins

  MISUMI

  ・Since the diameter of the waste removal pin is larger than that of a normal jetter punch, a more stable waste removal effect can be expected.
  ・The pin strength and rigidity have also been increased by increasing the diameter of the brushing pin. Please also try this when pin breakage is a problem with regular jet punches.

  • FLANGE
  • SKD11

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Key Flat Shank Jector Punches WPC treatment, HW Coating

  MISUMI

  This punch has a jetter punch with a flat surface for preventing rotation on the shank, and has been treated with WPC®, a type of precision shot peening, to improve fatigue strength and the adhesion of the TiCN coating.

  • FLANGE
  • SKH51
  • SKD11
  • POWDER HSS
  • HW
  • WPC

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Key Flat Shank Tapped Punches Normal, TiCN Coating

  MISUMI

  tapped punch with a flat surface on the shank to prevent rotation. You can choose between a normal type with no coating and a TiCN coating with improved wear resistance.

  • BOLT
  • SKD11
  • POWDER HSS
  • TiCN

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Jector Punches, HW Coating

  MISUMI

  ・A highly durable product that suppresses cutting edge wear and reduces maintenance man-hours and total costs.
  ・Added die steel lineup and cutting edge length X type.
  ・If you want to strengthen the scum removal force, please use the "spring reinforced type".
  
  [What is HW coating]
  ・It is a coating that improves the adhesion of the TiCN film by applying WPC treatment to the base of the TiCN coating.
  Since the coating film is less likely to peel off, the life of the punch can be expected to be longer than that of conventional TiCN.
  ・By reviewing the surface treatment, it is possible to reduce maintenance man-hours and total costs.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Jector Punches DLC Coating

  MISUMI

  We have added die steel lineup and cutting edge length X type!
  
  ・The biggest feature is the low coefficient of friction compared to other coated punches. Since there is less friction between the punch cutting edge and the workpiece (workpiece material), it is effective in piercing aluminum materials, where chips during punching tend to be a problem.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

Loading...