Punches For Heavy Load（Tip shape：R）

• 

  Jector Punches for Heavy Load

  MISUMI

  - Recommended when you are concerned about damage to the brim of the punch, such as when punching high-strength materials.

  • FLANGE
  • POWDER HSS

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s)

• 

  Punches for Heavy Load HW Coating

  MISUMI

  ・A highly durable product that suppresses flange damage and cutting edge wear, reducing maintenance man-hours and total costs.
  
  [What is a punch for punching thick plates]
  ・Recommended when punching high tensile strength materials and other situations where you are concerned about damage to the punch brim.
  [What is HW coating]
  ・It is a coating that improves the adhesion of the TiCN film by applying WPC treatment to the base of the TiCN coating.
  Since the coating film is less likely to peel off, the life of the punch can be expected to be longer than that of conventional TiCN.
  ・By reviewing the surface treatment, it is possible to reduce maintenance man-hours and total costs.

  • FLANGE
  • SKH51
  • POWDER HSS
  • HW

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s)

• 

  Punches for Heavy Load Dicoat treatment

  MISUMI

  Recommended when you are concerned about damage to the brim of the punch, such as when punching high-strength materials.
  ・By applying dicoat treatment (TD treatment) to the punch for punching thick plates, the wear resistance of the punch edge is improved.

  • FLANGE
  • POWDER HSS
  • DICOAT

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Jector Punches for Heavy Load Dicoat treatment

  MISUMI

  Recommended when you are concerned about damage to the brim of the punch, such as when punching high-strength materials.
  ・Dicoat treatment (TD treatment) is applied to the punch for punching thick plates to improve the wear resistance of the punch cutting edge.

  • FLANGE
  • POWDER HSS
  • DICOAT

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Punches for Heavy Load WPC Treatment

  MISUMI

  Recommended when you are concerned about damage to the brim of the punch, such as when punching high-tensile steel materials. Fatigue strength is improved by applying WPCⓇ treatment to the cutting edge.

  • FLANGE
  • SKH51
  • POWDER HSS
  • WPC

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Jector Punches for Heavy Load HW Coating

  MISUMI

  Recommended when you are concerned about damage to the brim of the punch, such as when punching high-strength materials.
  [What is HW coating]
  It is a coating that improves the adhesion of the TiCN film by applying WPC treatment to the base of the TiCN coating.
  Since the coating film is less likely to peel off, the life of the punch can be expected to be longer than that of conventional TiCN.

  • Volume Discount

  • FLANGE
  • POWDER HSS
  • HW

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s)

• 

  Double Stepped Shoulder Punches for Heavy Load Normal

  MISUMI

  A punch with a guide section separate from the cutting edge. Please use this when the required cutting edge length for the punch guide cannot be secured with the set cutting edge diameter. For punching high-tensile materials and thick plates, the punch brim is slightly larger than a normal shoulder punch.

  • FLANGE
  • SKH51
  • POWDER HSS

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Double Stepped Shoulder Punches for Heavy Load Normal TiCN Coating

  MISUMI

  A two-stage punch for punching high tensile strength and thick plates with TiCN coating, which is widely used in press molds. Please use this when the required cutting edge length for the punch guide cannot be secured with the set cutting edge diameter.

  • FLANGE
  • SKH51
  • POWDER HSS
  • TiCN

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Punches for Heavy Load Lapping

  MISUMI

  Recommended when you are concerned about damage to the brim of the punch, such as when punching high-tensile steel materials. The cutting edge has a lap finish.

  • FLANGE
  • SKH51
  • POWDER HSS

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s)

• 

  Jector Punches for Heavy Load Lapping

  MISUMI

  This is a jetter punch for punching thick plates with a lap finish on the cutting edge to improve the roughness of the cutting edge surface. Recommended when there is a concern about damage to the punch brim, such as when punching high-tensile steel materials.

  • FLANGE
  • POWDER HSS

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s)

• 

  Jector Punches for Heavy Load Configurable full length, Fixed B type

  MISUMI

  Recommended when you are concerned about damage to the brim of the punch, such as when punching high-strength materials.
  ・This is a jetter punch that keeps the cutting edge length (B dimension) constant for any given overall length (L dimension). Because there is no side hole in the shank, the punch is less likely to break than regular jet punches for punching thick plates.

  • FLANGE
  • POWDER HSS

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Jector Punches for Heavy Load Configurable full length, Fixed B type, Normal, TiCN Coating

  MISUMI

  Recommended when you are concerned about damage to the brim of the punch, such as when punching high-strength materials.
  ・This is a jetter punch that keeps the cutting edge length (B dimension) constant for any given overall length (L dimension). Because there is no side hole in the shank, the punch is less likely to break than regular jet punches for punching thick plates.
  [What is TiCN coating]
  TiCN is a coating widely used in press molds. Improved punch life can be expected by increasing the wear resistance of the cutting edge.

  • FLANGE
  • POWDER HSS
  • TiCN

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Jector Punches for Heavy Load Configurable full length, Fixed B type, WPC treatment, HW Coating

  MISUMI

  Recommended when you are concerned about damage to the brim of the punch, such as when punching high-strength materials.
  ・This is a jetter punch that keeps the cutting edge length (B dimension) constant for any given overall length (L dimension). Because there is no side hole in the shank, the punch is less likely to break than regular jet punches for punching thick plates.
  [What is HW coating]
  It is a coating that improves the adhesion of the TiCN film by applying WPC treatment to the base of the TiCN coating.
  Since the coating film is less likely to peel off, the life of the punch can be expected to be longer than that of conventional TiCN.

  • FLANGE
  • POWDER HSS
  • HW
  • WPC

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Jector Punches for Heavy Load WPC treatment

  MISUMI

  This punch has a slightly larger brim for increased strength, for applications where damage to the punch brim is a concern, such as punching high-tensile steel materials. A kicker pin for removing waste is incorporated inside the punch. Fatigue strength is improved by applying WPCⓇ treatment to the cutting edge.

  • FLANGE
  • POWDER HSS
  • WPC

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Double Stepped Shoulder Punches for Heavy Load Normal HW Coating

  MISUMI

  two-stage punch for punching high tensile strength and thick plates that has improved coating adhesion by using WPCⓇ treatment. Please use this when the required cutting edge length for the punch guide cannot be secured with the set cutting edge diameter.

  • FLANGE
  • SKH51
  • POWDER HSS
  • HW

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s)

Loading...