(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping
63,000 Stock items for Same Day Shipping
9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama
63,000 Item Stok untuk Pengiriman di Hari yang Sama
021-8984-0008
021-8984-0008
8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)
8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
Order/Quote
?
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
[Clean & Pack] Shaft - Both Ends Tapped
![[Clean & Pack] Shaft - Both Ends Tapped](http://content.misumi-ec.com/image/upload/t_product_main/t_misumi_wm/v1/p/jp/product/series/110310639359/110310639359_001_20230911105917.jpg?$product_main$)
Click this image to zoom it.
Move the mouse over the image to zoom
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
| ·Degreasing (Anti-rust single packing) | : Part Number SL-□□ |
| ·Precision cleaning (Degassing double packing) | : Part Number SH-□□ |
| ·Electrolytic polishing + precision cleaning (Degassing double packing) | : Part Number SHD-□□ |
| Product Part Number | Cleaning Method | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Process |
| SL-□□ | Degreasing | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| SH-□□ | Precision cleaning | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| SHD-□□ | Electrolytic polishing + precision cleaning | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
(i)Caution
- Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product. Please be careful about the application location and storage environment.
Part Number
Configured Part Number is shown.
| Type | Body Material | Cleaning Method | ||||
| D Tol. f8 | Material | Surface Treatment | Cleaning Method | Cleaning Environment | Packaging Type | Packing Environment |
| SL-PSSFGW | SUS304 | Hard Chrome Plating Plating Hardness: HV750 or more Plating Thickness: 10µ or more | Degreasing | General environment | Anti-rust packing | General environment |
| SH-PSSFGW | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | ||
[!] Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10 mm). >> Here
[ ! ] L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> Here
[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing and precision cleaning shown at the bottom of the specification table.
Specification Table
Part Number | — | L | — | M | — | N |
SL-PSSFUW8 | — | 200 | — | M4 | — | N4 |
SH-PSSFGW20 | — | 500 | — | M6 | — | N10 |
D Tol. | ||
D | h5 | f8 |
4 | 0 −0.005 | — |
5 | ||
6 | −0.010 −0.028 | |
8 | 0 −0.006 | −0.013 −0.035 |
10 | ||
12 | 0 −0.008 | −0.016 −0.043 |
13 | ||
15 | ||
16 | ||
18 | ||
20 | 0 −0.009 | −0.020 −0.053 |
25 | ||
30 | ||
35 | 0 −0.011 | −0.025 −0.064 |
40 | ||
50 | ||
Part Number | L | M (Coarse), N (Coarse) Selection | C | |||||||||||||
Type | D | 1 mm Increments | ||||||||||||||
D Tolerance h5 SL-PSSFUW SH-PSSFUW D Tol. f8 SL-PSSFGW SH-PSSFGW | 4 | 20 to 300 | 2 | 0.2 or less | ||||||||||||
5 | 20 to 400 | 2.6 | 3 | |||||||||||||
6 | 15 to 900 | 3 | 0.5 or Less | |||||||||||||
8 | 15 to 1100 | 3 | 4 | 5 | ||||||||||||
10 | 15 to 1200 | 3 | 4 | 5 | 6 | |||||||||||
12 | 15 to 1400 | 4 | 5 | 6 | 8 | |||||||||||
13 | 15 to 1400 | 4 | 5 | 6 | 8 | |||||||||||
15 | 15 to 1400 | 4 | 5 | 6 | 8 | 10 | ||||||||||
16 | 16 to 1400 | 4 | 5 | 6 | 8 | 10 | ||||||||||
18 | 30 to 1400 | 4 | 5 | 6 | 8 | 10 | 12 | |||||||||
20 | 30 to 1400 | 4 | 5 | 6 | 8 | 10 | 12 | 1.0 or less | ||||||||
25 | 35 to 1400 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | ||||||||
30 | 35 to 1500 | 6 | 8 | 10 | 12 | 16 | 20 | |||||||||
35 | 35 to 1500 | 8 | 10 | 12 | 16 | 20 | 24 | |||||||||
40 | 50 to 1500 | 10 | 12 | 16 | 20 | 24 | 30 | |||||||||
50 | 65 to 1500 | 12 | 16 | 20 | 24 | 30 | ||||||||||
[ ! ] When M × 2.5 + 4 + N × 2.5 + 4 ≥ L, the tap pilot hole is through, and the priority is given to the large tap effective length, so the small tap effective length becomes shorter.
Alteration Details
·See below for alteration.
* When selecting multiple alterations, the distance between machined areas should be 2 mm or more.
| Alterations Code | Alteration Details | Fixed Dimension | Applicable Conditions | Ordering Example | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LKC |
| ·L < 200 >> L ± 0.03 ·200≦L<500→L±0.05 ·L≧500→L±0.1 | ·L Dimension can be specified in 0.1 mm increments. | SFJW30-500.5-M8-N10-LKC | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| WSC |
|
| WSC, X = 1 mm Increments WSC+X+ℓ1 × 2<L WSC (X) ≧0 ·Applicable to D = 6 or more Cannot be machined coplanarly. Not available in combination with FC. | SFJW30-500-M8-N10-WSC12-X8 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| FC |
|
| FC, A = 1 mm Increments D≦30:FC≦5 × D, D≧35:FC≦3 × D A = 0 or A ≥ 2 Not available in combination with WFC. | SFJW30-500-M8-N10-FC10-A8 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| WFC |
|
| WFC, A, E = 1 mm Increments D≦30:WFC≦5 × D, D≧35:WFC≦3 × D A(E) = 0 or A(E) ≥2 Cannot be machined coplanarly. Not available in combination with FC. | SFJW30-500-M8-N10-WFC8-A8-E2 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| KC |
|
| KC, G = 1 mm Increments b ≤ G ≤ 30, G ≤ L/3 L>500:2≦KC≦L/3 L<500:2≦KC≦500 M × 2<KC+F ·Only applicable to D = 12, 16, 20, 25 and 30. This alteration cannot be applied to any tapped area (M x 2.5 + 4). | SFJW30-500-M8-N10-KC10-G10 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| WKC |
| KC, WKC, G, C = 1 mm Increments b ≤ G(C) ≤ 30, G(C) ≤ L/3 L>500:2≦KC (WKC) ≦L/3 L<500:2≦KC (WKC) ≦500 G+C≦L/3 M × 2<KC+F ·Only applicable to D = 12, 16, 20, 25 and 30. Cannot be machined coplanarly. This alteration cannot be applied to any tapped area (M x 2.5 + 4). | SFJW30-500-M8-N10-KC10-G10-WKC10-C8 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
| MSC NSC |
|
| ·Applicable to D = 12 or more Not available in combination with MD/ND. | SFJW30-500-MSC14-NSC14 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| RC |
|
| RC = 1 mm Increments RC + b1 ≤ L RC≧2 ·Applicable to D = 10 to 30 Not available in combination with WRC. | SFJW30-500-M8-N10-RC10 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| WRC |
|
| WRC = 1 mm Increments WRC + b1 ≤ L WRC (Y) ≧2 ·Applicable to D = 10 to 30 Cannot be machined coplanarly. Not available in combination with RC. | SFJW30-500-M8-N10-WRC10-Y10 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| MD ND |
| - | ·Applicable to D = 10 to 30 and M (N) = 6 to 20 One End Tapped: MD × 3.5+4≦L Both Ends Tapped: MD × 3.5+4+ND × 3.5+4≦L Not available in combination with KC/WKC/MSC/NSC. | SFJW30-500-MD8-ND8 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
Cleaning Process·Degreasing (Part Number: SL-□□)
Working Environment: General environment
 |  |  | |  | |  |
| Alkaline warm pure water | Ultrasonic pure water cleaning after cleaning with pure water *3 times | Dry | Anti-rust single packing |
·Precision cleaning (Part Number: SH-□□)
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||
| |  | |  | | | |  |
Hydrocarbon cleaning Ro water cleaning | Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water) | Use pure water (13 MΩ·cm) | Use nitrogen blow | Conducted on a clean bench in a Class 10 clean environment | ||||
·Electrolytic polishing + precision cleaning (Part Number: SHD-□□)
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||||
| |  | | | | | | | | |
Hydrocarbon cleaning Ro water cleaning | Electrolytic polishing with an electrolytic polishing layer according to the material | Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water) | Use warm pure water (13 MΩ·cm) | Use nitrogen blow | Conducted on a clean bench in a Class 10 clean environment | |||||
Packaging Example| For degreasing: (Part Number: SL-□□)  | For precision cleaning or electrolytic polishing + precision cleaning: (Part Number: SH-□□/SHD-□□)  [ ! ]Both the first and second layer packaging are degassed. |
Cleaning Effectiveness / Recommended Environment for UseCleaning Method | Product Part Number | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Use Case and Process |
|---|---|---|---|---|---|
| Degreasing | SL-□□ | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| Precision cleaning | SH-□□ | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| Electrolytic polishing + precision cleaning | SHD-□□ | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| SH-PSSFUW4-[20-300/1]-M2-N2 |
| SH-PSSFUW5-[20-400/1]-M3-N3 |
| SH-PSSFUW6-[15-800/1]-M3-N3 |
| SH-PSSFUW8-[15-800/1]-M[3,4,5]-N[3,4,5] |
| SH-PSSFUW10-[15-800/1]-M[3,4,5,6]-N[3,4,5,6] |
| SH-PSSFUW10-[15-800/1]-M[3,4,5,6]-ND6 |
| SH-PSSFUW10-[15-800/1]-MD6-N[3,4,5,6] |
| SH-PSSFUW10-[15-800/1]-MD6-ND6 |
| SH-PSSFUW12-[15-800/1]-M[4,5,6,8]-N[4,5,6,8] |
| SH-PSSFUW12-[15-800/1]-M[4,5,6,8]-ND[6,8] |
| SH-PSSFUW12-[15-800/1]-M[4,5,6,8]-NSC8 |
| SH-PSSFUW12-[15-800/1]-MD[6,8]-N[4,5,6,8] |
| SH-PSSFUW12-[15-800/1]-MD[6,8]-ND[6,8] |
| SH-PSSFUW12-[15-800/1]-MD[6,8]-NSC8 |
| SH-PSSFUW12-[15-800/1]-MSC8-N[4,5,6,8] |
| SH-PSSFUW12-[15-800/1]-MSC8-ND[6,8] |
| SH-PSSFUW12-[15-800/1]-MSC8-NSC8 |
| SH-PSSFUW13-[15-800/1]-M[4,5,6,8]-N[4,5,6,8] |
| SH-PSSFUW13-[15-800/1]-M[4,5,6,8]-ND[6,8] |
| SH-PSSFUW13-[15-800/1]-M[4,5,6,8]-NSC8 |
| SH-PSSFUW13-[15-800/1]-MD[6,8]-N[4,5,6,8] |
| SH-PSSFUW13-[15-800/1]-MD[6,8]-ND[6,8] |
| SH-PSSFUW13-[15-800/1]-MD[6,8]-NSC8 |
| SH-PSSFUW13-[15-800/1]-MSC8-N[4,5,6,8] |
| SH-PSSFUW13-[15-800/1]-MSC8-ND[6,8] |
| SH-PSSFUW13-[15-800/1]-MSC8-NSC8 |
| SH-PSSFUW15-[15-800/1]-M[4,5,6,8,10]-N[4,5,6,8,10] |
| SH-PSSFUW15-[15-800/1]-M[4,5,6,8,10]-ND[6,8,10] |
| SH-PSSFUW15-[15-800/1]-M[4,5,6,8,10]-NSC[8,10] |
| SH-PSSFUW15-[15-800/1]-MD[6,8,10]-N[4,5,6,8,10] |
| SH-PSSFUW15-[15-800/1]-MD[6,8,10]-ND[6,8,10] |
| SH-PSSFUW15-[15-800/1]-MD[6,8,10]-NSC[8,10] |
| SH-PSSFUW15-[15-800/1]-MSC[8,10]-N[4,5,6,8,10] |
| SH-PSSFUW15-[15-800/1]-MSC[8,10]-ND[6,8,10] |
| SH-PSSFUW15-[15-800/1]-MSC[8,10]-NSC[8,10] |
| SH-PSSFUW16-[16-800/1]-M[4,5,6,8,10]-N[4,5,6,8,10] |
| SH-PSSFUW16-[16-800/1]-M[4,5,6,8,10]-ND[6,8,10] |
| SH-PSSFUW16-[16-800/1]-M[4,5,6,8,10]-NSC[8,10] |
| SH-PSSFUW16-[16-800/1]-MD[6,8,10]-N[4,5,6,8,10] |
| SH-PSSFUW16-[16-800/1]-MD[6,8,10]-ND[6,8,10] |
| SH-PSSFUW16-[16-800/1]-MD[6,8,10]-NSC[8,10] |
| SH-PSSFUW16-[16-800/1]-MSC[8,10]-N[4,5,6,8,10] |
| SH-PSSFUW16-[16-800/1]-MSC[8,10]-ND[6,8,10] |
| SH-PSSFUW16-[16-800/1]-MSC[8,10]-NSC[8,10] |
| SH-PSSFUW18-[30-800/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12] |
| SH-PSSFUW18-[30-800/1]-M[4,5,6,8,10,12]-ND[6,8,10,12] |
| SH-PSSFUW18-[30-800/1]-M[4,5,6,8,10,12]-NSC[8,10,12] |
| SH-PSSFUW18-[30-800/1]-MD[6,8,10,12]-N[4,5,6,8,10,12] |
| SH-PSSFUW18-[30-800/1]-MD[6,8,10,12]-ND[6,8,10,12] |
| SH-PSSFUW18-[30-800/1]-MD[6,8,10,12]-NSC[8,10,12] |
| SH-PSSFUW18-[30-800/1]-MSC[8,10,12]-N[4,5,6,8,10,12] |
| SH-PSSFUW18-[30-800/1]-MSC[8,10,12]-ND[6,8,10,12] |
| SH-PSSFUW18-[30-800/1]-MSC[8,10,12]-NSC[8,10,12] |
| SH-PSSFUW20-[30-800/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12] |
| SH-PSSFUW20-[30-800/1]-M[4,5,6,8,10,12]-ND[6,8,10,12] |
| SH-PSSFUW20-[30-800/1]-M[4,5,6,8,10,12]-NSC[8,10,12,14] |
| SH-PSSFUW20-[30-800/1]-MD[6,8,10,12]-N[4,5,6,8,10,12] |
| SH-PSSFUW20-[30-800/1]-MD[6,8,10,12]-ND[6,8,10,12] |
| SH-PSSFUW20-[30-800/1]-MD[6,8,10,12]-NSC[8,10,12,14] |
| SH-PSSFUW20-[30-800/1]-MSC[8,10,12,14]-N[4,5,6,8,10,12] |
| Part Number | Minimum order quantity | Volume Discount | Days to Ship | Material | Heat Treatment | Shaft Dia. D (Ø) | Length L (mm) | Shaft Fit Tolerance | Hardness | Change Tapped Thread N to Fine Thread [NSC] (㎜) | Coarse Tapped [ND] Depth=Nx3 (㎜) | Change Tapped Thread M to Fine Thread [MSC] (㎜) | Coarse Tapped [M] Depth=Mx2 (㎜) | Coarse Tapped [MD] Depth=Mx3 (㎜) | Coarse Tapped [N] Depth=Nx2 (㎜) | Material Certificate: Material | Material Certificate: Surface Treatment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 4 | 20 ～ 300 | h5 | Induction Hardened (56HRC or more) | - | - | - | - | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 5 | 20 ～ 400 | h5 | Induction Hardened (56HRC or more) | - | - | - | - | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 6 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | - | 3 | - | 3 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 8 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | - | 3 ～ 5 | - | 3 ～ 5 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 10 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | - | 3 ～ 6 | - | 3 ～ 6 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 10 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | 6 | - | 3 ～ 6 | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 10 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | - | - | 6 | 3 ～ 6 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 10 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | 6 | - | - | 6 | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 12 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | - | 4 ～ 8 | - | 4 ～ 8 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 12 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | 6 ～ 8 | - | 4 ～ 8 | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 12 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | 8 | - | - | 4 ～ 8 | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 12 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | - | - | 6 ～ 8 | 4 ～ 8 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 12 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | 6 ～ 8 | - | - | 6 ～ 8 | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 12 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | 8 | - | - | - | 6 ～ 8 | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 12 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | 8 | - | - | 4 ～ 8 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 12 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | 6 ～ 8 | 8 | - | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 12 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | 8 | - | 8 | - | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 13 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | - | 4 ～ 8 | - | 4 ～ 8 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 13 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | 6 ～ 8 | - | 4 ～ 8 | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 13 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | 8 | - | - | 4 ～ 8 | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 13 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | - | - | 6 ～ 8 | 4 ～ 8 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 13 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | 6 ～ 8 | - | - | 6 ～ 8 | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 13 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | 8 | - | - | - | 6 ～ 8 | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 13 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | 8 | - | - | 4 ～ 8 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 13 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | 6 ～ 8 | 8 | - | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 13 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | 8 | - | 8 | - | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 15 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | - | 4 ～ 10 | - | 4 ～ 10 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 15 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | 6 ～ 10 | - | 4 ～ 10 | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 15 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | 8 ～ 10 | - | - | 4 ～ 10 | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 15 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | - | - | 6 ～ 10 | 4 ～ 10 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 15 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | 6 ～ 10 | - | - | 6 ～ 10 | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 15 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | 8 ～ 10 | - | - | - | 6 ～ 10 | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 15 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | 8 ～ 10 | - | - | 4 ～ 10 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 15 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | 6 ～ 10 | 8 ～ 10 | - | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 15 | 15 ～ 800 | h5 | Induction Hardened (56HRC or more) | 8 ～ 10 | - | 8 ～ 10 | - | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 16 | 16 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | - | 4 ～ 10 | - | 4 ～ 10 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 16 | 16 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | 6 ～ 10 | - | 4 ～ 10 | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 16 | 16 ～ 800 | h5 | Induction Hardened (56HRC or more) | 8 ～ 10 | - | - | 4 ～ 10 | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 16 | 16 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | - | - | 6 ～ 10 | 4 ～ 10 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 16 | 16 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | 6 ～ 10 | - | - | 6 ～ 10 | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 16 | 16 ～ 800 | h5 | Induction Hardened (56HRC or more) | 8 ～ 10 | - | - | - | 6 ～ 10 | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 16 | 16 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | 8 ～ 10 | - | - | 4 ～ 10 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 16 | 16 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | 6 ～ 10 | 8 ～ 10 | - | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 16 | 16 ～ 800 | h5 | Induction Hardened (56HRC or more) | 8 ～ 10 | - | 8 ～ 10 | - | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 18 | 30 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | - | 4 ～ 12 | - | 4 ～ 12 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 18 | 30 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | 6 ～ 12 | - | 4 ～ 12 | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 18 | 30 ～ 800 | h5 | Induction Hardened (56HRC or more) | 8 ～ 12 | - | - | 4 ～ 12 | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 18 | 30 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | - | - | 6 ～ 12 | 4 ～ 12 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 18 | 30 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | 6 ～ 12 | - | - | 6 ～ 12 | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 18 | 30 ～ 800 | h5 | Induction Hardened (56HRC or more) | 8 ～ 12 | - | - | - | 6 ～ 12 | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 18 | 30 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | 8 ～ 12 | - | - | 4 ～ 12 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 18 | 30 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | 6 ～ 12 | 8 ～ 12 | - | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 18 | 30 ～ 800 | h5 | Induction Hardened (56HRC or more) | 8 ～ 12 | - | 8 ～ 12 | - | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 20 | 30 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | - | 4 ～ 12 | - | 4 ～ 12 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 20 | 30 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | 6 ～ 12 | - | 4 ～ 12 | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 20 | 30 ～ 800 | h5 | Induction Hardened (56HRC or more) | 8 ～ 14 | - | - | 4 ～ 12 | - | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 20 | 30 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | - | - | 6 ～ 12 | 4 ～ 12 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 20 | 30 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | 6 ～ 12 | - | - | 6 ～ 12 | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 20 | 30 ～ 800 | h5 | Induction Hardened (56HRC or more) | 8 ～ 14 | - | - | - | 6 ～ 12 | - | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more | ||
| 1 Piece(s) | 14 Day(s) or more | [Stainless Steel] SUS440C or 13Cr Stainless Steel | Induction Hardened | 20 | 30 ～ 800 | h5 | Induction Hardened (56HRC or more) | - | - | 8 ～ 14 | - | - | 4 ～ 12 | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more |
Loading...
Basic Information
| Basic Shape | Solid | End Shape (Left) | Tapped | End Shape (Right) | Tapped |
|---|---|---|---|---|---|
| Shaft End Perpendicularity | Perpendicularity (0.2) | Surface Treatment | Hard Chrome Plating | Material Certificate | Available |
Specification/Dimensions
-
Material
- Steel
- Stainless Steel
- Steel
-
Heat Treatment
- Not Provided
- Induction Hardened
-
Shaft Dia. D(Ø)
-
Length L(mm)
-
Hardness
- Induction Hardened (56HRC or more)
- Not induction hardened
-
Change Tapped Thread N to Fine Thread [NSC](㎜)
-
Coarse Tapped [ND] Depth=Nx3(㎜)
-
Change Tapped Thread M to Fine Thread [MSC](㎜)
-
Coarse Tapped [M] Depth=Mx2(㎜)
-
Coarse Tapped [MD] Depth=Mx3(㎜)
-
Coarse Tapped [N] Depth=Nx2(㎜)
-
type
- SH-PSSFGW
- SH-PSSFUW
- SHD-PSSFUW
- SL-PSSFGW
- SL-PSSFUW
-
Shaft Fit Tolerance
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 13 Day(s) or Less
- 14 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy