YUKIGIKEN Adjuster Pads

• 

  Adjuster

  YUKIGIKEN

  Adjuster
  This adjuster is commonly utilized to assemble aluminum extrusions. It is designed for aluminum extrusions from the SUS brand.
  [Feature]
  - Height (mm.) : 70, 97.5 and 100
  - Outside Diameter (mm.) : 40 x 50
  - Thread Size : M10 and M16
  - Material :
  Shaft - SWRM
  Washer - Nylon
  Cover - SPCC
  [Application]
  It is used in industrial settings to level the machine on the floor and ensure proper alignment.
  

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Stainless Steel Small Adjuster

  YUKIGIKEN

  Small stainless steel adjuster suitable for laminar flow cabinet, etc.
  [Features]
  ・ The body is made of all-stainless steel with excellent corrosion resistance
  ・ Corresponding to a distorted floor surface by a swing mechanism of about 10°
  ・ Due to the dual structure of the main body and the bottom, the height can be adjusted by turning the main body by hand even after installation
  ・ The bottom is made of non-slip elastomer
  [Applications]
  ・ Suitable for housing, etc., in a clean environment

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Ball Type Adjuster

  YUKIGIKEN

  Ball type adjuster.
  [Features]
  ・ It supports a distorted floor surface due to the swing mechanism
  ・ If the floor coating has low solvent resistance (single-component acrylic floor coating, etc.), the rubber of the adjuster may stick to the floor and the rubber bonding may come off
  ・ Since the foot part is a built-in type, it may come off. If it comes off, press-fit again
  ・ Material, thread section: SS400, bottom: Rubber
  ・ Surface treatment: Nickel plating
  [Applications]
  ・ It is used to adjust the level of the machine base and partition

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Plastic Foot

  YUKIGIKEN

  Plastic Foot
  This plastic foot is commonly utilized to assemble an adjustable foot for the machine to protect the markings on the floor.
  [Feature]
  - Size (Diameter x Height) (mm.): 23 X 11.5
  - Thread Size : M4
  - Material : Plastic ABS and Felt/Wool
  - Option : With mounting bolt and nut (for 25 series frames and 40 series frames)
  [Application]
  It is commonly utilized to assemble an adjustable foot for the machine
  

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Small Adjuster

  YUKIGIKEN

  Compact design adjuster.
  [Features]
  ・ A low profile design that does not damage the housing design
  ・ With a cross-head that is convenient for mounting
  [Applications]
  ・ It is used as an adjuster for small housings

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Cost-Effective Type, Adjuster

  YUKIGIKEN

  Adjuster with excellent cost-effectiveness.
  [Features]
  ・ Large pad diameter for stability
  ・ Material, thread section: SS400, bottom: Rubber
  · Surface treatment: zinc plating
  · Weight: 300 g
  ・ Allowable load: 300 kgf
  [Applications]
  ・ It is used to adjust the level of the machine base and partition

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Rubber Feet (Non-Migratory Specifications)

  YUKIGIKEN

  Rubber Feet (Non-Migratory Specifications)
  This rubber seat is commonly utilized to assemble an adjustable foot for the machine to prevent vibration and also to protect the markings on the floor.
  [Feature]
  - Size (Diameter x Height) (mm.): 20 X 8
  - Thread Size : M4
  - Material : EPDM
  Main Body - SBR
  Washer - SPCC
  - Applicable For : 25 and 40 frame series
  [Application]
  It is commonly utilized to assemble an adjustable foot for the machine
  

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Adjuster for Corner

  YUKIGIKEN

  Adjuster for Corner
  This adjustable is commonly utilized to assemble aluminum extrusions. Moreover, this equipment can be brought close to each other or installed in corners.
  [Feature]
  - Pad size LXH (mm.) :
  AC12-F size 45X45
  AC16-F size 57X57
  - Thread Size : M12 X 1.75 and M16 X 2.0
  - Overall Length : 97 for AC12-F and 103 for AC16-F
  - Material :
  Bolt - SWRCH
  Pad - SPCC
  [Application]
  It is used in industrial settings to level the machine on the floor and ensure proper alignment.
  

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

Loading...