ORIENTAL MOTOR Small AC Motors

• 

  Induction Motor, K Series

  ORIENTAL MOTOR

  - Induction Motor, K Series from ORIENTAL MOTOR.
  - World K Series models that conform to power supply voltages in Asia are certified under the CCC System and have built-in overheat protection devices.
  - These models provide high cost performance with the same functions as K Series models that conform to global power supply voltages.
  - The product lineup includes models with output power from 1 W to 150 W.
  

  Days to Ship:	Same day or more

• 

  Parallel Shaft Gearhead for Induction Motor, World K2 Series

  ORIENTAL MOTOR

  - Parallel Shaft Gearheads, World K series from ORIENTAL MOTOR.
  - Easy Speed Reduction and Torque Increase, Combination with a gearhead allows the motor to slow down to a required speed and generate higher torque.
  - Wide Variety of Products Gearheads are available with 20 different gear ratios from 1:3 to 1:180. Using a decimal gearhead also allows for large gear ratios of 1:180 or more.
  - Rated life of gear head is up to 5000 hours.
  

  Days to Ship:	Same day or more

• 

  Motor for AC Speed Control Unit

  ORIENTAL MOTOR

  - Motor for AC Speed Control Unit from ORIENTAL MOTOR.
  - A lineup that includes single-phase 100 VAC, 110 VAC, 115 VAC, 200 VAC, 220 VAC and 230 VAC, specifications as well as output power of 6 to 90 W is provided.
  - The dimension of square flange can be selected from 60 to 90 mm.
  - Wide Variety of Products Gearheads are available with 26 different gear ratios from 1:2 to 1:360.
  

  Days to Ship:	16 Day(s) or more

• 

  Parallel Shaft GU-K Gearhead for Compact AC Motors (Flange Mounted Type)

  ORIENTAL MOTOR

  Gearhead that converts number of rotations or torque to the required values
  
  [Features]
  · Type with mounting flange attached to gearhead.
  · Can be incorporated into equipment after first fixing the motor and gearhead

  Days to Ship:	Same day or more

• 

  Unit Type Speed Control Motor, US Series, Single Motor

  ORIENTAL MOTOR

  - Unit Type Speed Control Motor, US Series, Single Motor from ORIENTAL MOTOR.
  - The US Series is a panel mounted control unit and speed control motor package.
  - Wiring is performed through an easy connection method utilizing connectors.
  - This series is optimal for easy speed control applications. The speed can be set easily with the potentiometer on the front panel of the control unit.
  - The instantaneous stop function is not available.
  

  Days to Ship:	16 Day(s) or more

• 

  Unit-Type Speed Control Motor US Series

  ORIENTAL MOTOR

  - Unit-Type Speed Control Motor US Series from ORIENTAL MOTOR.
  - The US Series is a panel mounted control unit and speed control motor package.
  - Wiring is performed through an easy connection method utilizing connectors.
  - This series is optimal for easy speed control applications. The speed can be set easily with the potentiometer on the front panel of the control unit.
  - The instantaneous stop function is not available.
  

  Days to Ship:	16 Day(s) or more

• 

  Speed Control Motor, Induction Type, K Series

  ORIENTAL MOTOR

  - Speed Control Motor, Induction Type, K Series from ORIENTAL MOTOR.
  - A lineup that includes single-phase 100 VAC, single-phase 200 VAC, specifications as well as output power of 6 to 60 W is provided.
  - The dimension of square flange can be selected from 60 to 90 mm.
  - Inside an enclosure that is installed indoors (provide vent holes).
  - Operating ambient temperature −10 to +40 °C (+14 to +104 °F) (non-freezing).
  - Operating ambient humidity 85%, maximum (non-condensing).
  

  Days to Ship:	16 Day(s) or more

• 

  Induction Motor, World K2 Series

  ORIENTAL MOTOR

  Compliant with international safety standards, compatible with global voltages
  
  [Features]
  · Compliant with international safety standards.
  · All models are compliant with international safety standards and have overheating protection equipment built in.
  · UL/CSA standards certified.
  Chinese compulsory product authorization system (CCC system) certified.
  CE marking (low voltage directive) compliant.
  · Motor overheat protection device built in.
  Thermal protection, impedance protection.
  · Supports Japan domestic and major foreign country power supply voltages.
  · Can be quickly obtained even overseas when required.
  · Can be combined with orthogonal shaft gearhead to achieve device space saving

  Days to Ship:	15 Day(s) or more

• 

  Individual C and B Motor

  ORIENTAL MOTOR

  Compared with other AC small standard motors, the C and B motor can start and stop more quickly, and has excellent responsiveness. Appropriate for one-direction applications that continuously and frequently start and stop.
  
  [Features]
  · High-accuracy, high-response clutch and brake enable high-frequency starts and stops.
  · No-contact control of the clutch and brake operation is possible if a C and B controller (sold separately) is used.
  · Compact design for easy handling.
  · Drive parts can be clustered neatly together without taking up space.
  · The C and B motor GC dedicated gearhead and the GCH gearhead emphasize impact resistance, have been made stronger, have been specialized, and boast improved reliability (the GN gearhead and other gearheads cannot be mounted).
  · For induction motors, lead wire type, type with small terminal box, and speed control type are available.
  · Also, an abundant array of power supply specifications are available: single-phase 100V and 200V, and three-phase 200V

  Days to Ship:	21 Day(s) or more

• 

  Unit-Type Speed Control Motor US Series of Overheat Protection Type

  ORIENTAL MOTOR

  Unit product consisting of board surface mounting type control unit and speed control motor. Single-touch connection just by connecting a connector. Optimal for applications where simple speed control is desired. (No instant stop function.)

  Days to Ship:	Same day or more

• 

  Parallel Shaft GU-KB Gearhead (Enclosure-Shape Type) for Compact AC Motor

  ORIENTAL MOTOR

  Gearhead that converts number of rotations or torque to the required values

  Days to Ship:	Same day or more

• 

  Speed Control Motor Unit, MSD Series

  ORIENTAL MOTOR

  [Features]
  ・ Compact non-contact speed control unit with tachometer and speed control motor unit
  ・ Two types of control packs are available depending on the mounting method
  ・ Please use the DIN rail mounting for installation in the switchboard, and the recessed mounting for mounting on the panel for external display
  ・ Compact and easy to operate
  ・ Built-in digital tachometer, accurate rotational speed setting

  Days to Ship:	21 Day(s) or more

• 

  AC Speed Control Motor, US2 Series

  ORIENTAL MOTOR

  [Features]
  ・ Highly reliable closed-loop control speed control motor unit
  ・ Intuitive operation just by turning the dial to set the desired value and pressing the dial
  ・ Built-in capacitor, simple connection
  ・ Equipped with digital display

  Days to Ship:	16 Day(s) or more

• 

  Parallel Shaft Gearhead, Single Unit for Combination, KII Series

  ORIENTAL MOTOR

  Oriental Motor, Compact AC Motor Parallel Shaft Gearhead Single Unit KII Series for Combination

  Days to Ship:	16 Day(s) or more

• 

  Speed Control Motor, SS21 Type / SS31 Type

  ORIENTAL MOTOR

  [Features]
  "SS21 type"
  Combined with a 6 W to 40 W speed control motor, speed control, instant stop, slow start / slow down (-SSSD type) are possible.
  "SS31 type"
  Combined with a 60 W high output speed control motor, speed control, instant stop, slow start / slow down (-SSSD type) are possible.

  Days to Ship:	16 Day(s) or more

• 

  Induction Motor, BH Series, Parallel Shaft Gearhead (Combination Type)

  ORIENTAL MOTOR

  [Features]
  · Smallest size in its class but achieves 200W output.
  · Orthogonal shaft gearhead uses hypoid gears.
  · Lineup of hollow shafts and solid shafts is available to achieve space-saving.
  · Gearhead shaft has tapped hole machining that is convenient for connection to loads.
  · Combination type products that are delivered with the motor and gearhead already assembled are available.
  · Mounting to equipment can also be performed easily.
  · Combination type products are delivered with the motor and gearhead already assembled.
  · Mounting work to equipment is reduced.
  · Motor and gearhead can be ordered separately when changing motor/gearhead combinations or when a gearhead is needed for protection.

  Days to Ship:	15 Day(s) or more

• 

  High Power Induction Motor BH Series 200 W

  ORIENTAL MOTOR

  [Features]
  · Smallest size in its class but achieves 200W output.
  · Orthogonal shaft gearhead uses hypoid gears.
  · Lineup of hollow shafts and solid shafts is available to achieve space-saving.
  · Gearhead shaft has tapped hole machining that is convenient for connection to loads.

  Days to Ship:	21 Day(s) or more

• 

  Orthogonal Shaft Solid and Hollow Gearheads for Small AC Motors

  ORIENTAL MOTOR

  - Right-Angle Gearheads for Small AC Motors from ORIENTAL MOTOR.
  - Right-angle gearheads are flange-mounted gearheads that use worm gears and special helical gears.
  - Ideal for Space Saving, the motor is perpendicular to the load shaft, enabling space saving.
  - With hollow shaft gearheads, the parts cost and labor will decrease since no connecting parts are needed.
  - A wide variety of gear ratios (20 types, from 3 to 180) are available. The optimal gear ratio can be selected in the same manner as with parallel shaft gearheads.
  

  Days to Ship:	16 Day(s) or more

• 

  Parallel Shaft GE-S Gearhead for Induction Motor, World K2 Series

  ORIENTAL MOTOR

  - Induction Motor, World K Series, Parallel Shaft GE-S Gearhead from ORIENTAL MOTOR.
  - Easy speed reduction and torque increase, Combination with a gearhead allows the motor to reduce to a required speed or generate higher torque.
  - The GE-S gearhead achieves a long-rated life of 10000 hours, twice the level of conventional gearhead, by adopting a large, specially designed bearing and reinforced gears.
  - The GE-S gearhead comes with a tapped hole at the tip of the shaft.
  

  Days to Ship:	15 Day(s) or more

• 

  Parallel Shaft GN-S Gearhead for Compact AC Motors

  ORIENTAL MOTOR

  [Features]
  · Gearhead that converts motor rotation speed or torque to required rotation speed or torque.
  · Abundant product lineup of parallel shaft gearheads available.

  Days to Ship:	Same day or more

• 

  Single-Unit Motor with Electromagnetic Brake, World K2 Series

  ORIENTAL MOTOR

  Compatible with global voltages
  
  [Features]
  · Compliant with international safety standards.
  · All models are compliant with international safety standards and have overheating protection equipment built in.
  · UL/CSA standards certified.
  Chinese compulsory product authorization system (CCC system) certified.
  CE marking (low voltage directive) compliant.
  · Motor overheat protection device built in.
  Thermal protection, impedance protection.
  · Supports Japan domestic and major foreign country power supply voltages.
  · Can be quickly obtained even overseas when required.
  · Can be combined with orthogonal shaft gearhead to achieve device space saving

  Days to Ship:	16 Day(s) or more

• 

  LH Linear Head, □L Type

  ORIENTAL MOTOR

  - LH Linear Head from ORIENTAL MOTOR.
  - The LH Series of linear heads with a rack-and-pinion mechanism are coupled with standard AC compact motors. They easily produce linear motion such as pressing and reversing.
  - A wide variety of linear heads are available, depending on basic speed, length of rack, maximum transportable mass, direction of rack movement in respect to the mounting face etc.
  - Basic speed is based on synchronous speed (1800 r/min at 60Hz). The actual speed varies with the load or power supply frequency.
  

  Days to Ship:	21 Day(s) or more

• 

  Gearhead Single Unit for Combination

  ORIENTAL MOTOR

  - Gearhead Single Unit for Combination from ORIENTAL MOTOR.
  - Wide Variety of Products Gearheads are available with 11 different gear ratios from 1:10 to 1:1200.
  - Gear head type can be selected in to 3 types, Parallel Shafts, Orthogonal Axes (Hollow Shaft), Orthogonal Axes (Solid Shaft).
  - The rotation direction can be selected both Reverse direction to the motor or Same direction as the motor.
  - Mounting flange size can be selected 60 mm to 110 mm.
  

  Days to Ship:	16 Day(s) or more

• 

  Parallel Shaft Intermediate Gearheads

  ORIENTAL MOTOR

  Middle gear head.
  
  [Features]
  · Gearhead that converts motor rotation speed or torque to required rotation speed or torque.
  · Abundant product lineup of parallel shaft gearheads available.

  Days to Ship:	15 Day(s) or more

• 

  Reversible Motor, K Series

  ORIENTAL MOTOR

  - Reversible Motor, K Series from ORIENTAL MOTOR.
  - World K Series models that conform to power supply voltages in Asia are certified under the CCC System and have built-in overheat protection devices.
  - A lineup that includes single-phase 100 VAC, single-phase 200 VAC, specifications as well as output power of 1 to 90 W is provided.
  - A motor's life is determined by its bearing. We adopted high performance bearing grease to lubricate this important component. Life is twice as long as a conventional model.
  

  Days to Ship:	Same day or more

• 

  Speed Control Motor, World K2 Series

  ORIENTAL MOTOR

  - Speed Control Motor, World K2 Series from ORIENTAL MOTOR.
  - A lineup that includes single-phase 100 VAC, 110, VAC, 115 VAC, 200 VAC, 220 VAC and 230 VAC specifications as well as output power of 6 to 40 W is provided.
  - The dimension of square flange can be selected from 60 to 90 mm.
  - Inside an enclosure that is installed indoors (provide vent holes).
  - Operating ambient temperature 0 to 50 °C (non-freezing).
  - Operating ambient humidity 85%, maximum (non-condensing).
  

  Days to Ship:	16 Day(s) or more

• 

  AC Motor, KIIS Series

  ORIENTAL MOTOR

  [Features]
  ・ Highly efficient and highly characteristic three-phase motor with optimal design
  ・ Achieves the best characteristics in combination with an inverter
  ・ Compatible with protection rating IP66 (Type with terminal box)
  ・ Equipped with stainless steel shaft as standard
  ・ Compatible with H1 grease for food machine
  ・ Compact and lightweight
  ・ Low profile terminal box (Type with terminal box)
  ・ International standards (UL/CSA standard, CCC system, CE marking)

  Days to Ship:	16 Day(s) or more

• 

  Reversible Motor, KII Series

  ORIENTAL MOTOR

  [Features]
  ・ Ideal for one-way, continuous operation
  ・ You can drive easily
  ・ Excellent motor performance
  ・ Compatible with protection rating IP66 (Type with terminal box)
  ・ Equipped with a low profile terminal box (Type with terminal box)
  ・ Gearhead design points
  ・ Equipped with high-performance gearhead

  Days to Ship:	21 Day(s) or more

• 

  Parallel Shaft GN-K Gearhead for World K2 Series

  ORIENTAL MOTOR

  Gearhead that converts rotation speed and torque to the required values
  
  [Features]
  · Gearhead that converts motor rotation speed or torque to required rotation speed or torque.
  · Abundant product lineup of parallel shaft gearheads available.

  Days to Ship:	Same day or more

• 

  Electromagnetic brake motor BH series:Solid/Hollow Shaft Gear Head for Orthogonal Shaft (Combination Type)

  ORIENTAL MOTOR

  [Features]
  · Smallest size in its class but achieves 200W output.
  · Orthogonal shaft gearhead uses hypoid gears.
  · Lineup of hollow shafts and solid shafts is available to achieve space-saving.
  · Gearhead shaft has tapped hole machining that is convenient for connection to loads.

  Days to Ship:	21 Day(s) or more

• 

  Geared Motor, Dust-Proof and Waterproof Type, FPW Series

  ORIENTAL MOTOR

  4 types of output: 25W, 40W, 60W and 90W
  
  [Features]
  · Geared motor certified by UL as conforming to IEC standard IP67.
  · Appropriate for use in places where water splashed or that are washed regularly.
  · Waterproof type geared motor that can be used in areas affected by moisture.
  · IEC standard IP67-compliant.
  · Not suitable for underwater or high water pressure environments.
  · Uses special coating and updated shaft materials [stainless steel (SUS303 type)] for improved corrosion resistance.
  · Designed and structured to be dust-proof and waterproof.
  · UL/CSA standards certified. CE marking (low voltage directive) compliant.
  · Also, Chinese compulsory product authorization system (CCC system) certified

  Days to Ship:	21 Day(s) or more

• 

  Torque Motor K Series/World K Series, Individual Motor

  ORIENTAL MOTOR

  Optimal for applications that require torque adjustments, such as winding, presser applications, etc.
  
  [Features]
  · Torque motor that conforms to international safety standards (excluding 40W).
  · Motor rotation speed and torque can be adjusted by installing an external voltage adjuster.
  · Torque motor unit TM series that combines with a power controller that is capable of easily adjusting torque is also available

  Days to Ship:	16 Day(s) or more

• 

  Induction Motor, BH Series, Single-Unit Motor

  ORIENTAL MOTOR

  - Induction Motor, BH Series, Single-Unit Motor from ORIENTAL MOTOR.
  - Induction motors are optimal for uni-directional and continuous operation, such as a conveyor system.
  - Induction motors can be operated easily from an AC power supply.
  - These motors achieve a high output of 200 W (1/4 HP) with a frame size of 104 mm (4.09 inch).
  - With each combination type, the motor and gearhead come pre-assembled for easy installation into your equipment.
  

  Days to Ship:	15 Day(s) or more

• 

  Motors with Electromagnetic Brake BH series motor units

  ORIENTAL MOTOR

  Smallest size in its class but achieves 200W output.

  Days to Ship:	21 Day(s) or more

• 

  Increased Safety Explosion Proof Type Motor, K Series

  ORIENTAL MOTOR

  Motor with improved insulation performance and other safety factors against danger, damage, etc. caused by increased ambient temperature so that it can be used in hazardous places with a risk of generation of explosive gas, flammable gas, etc. Has completely closed structure, which makes it impossible for the insulated charging component to come into contact with exterior and also prevents dust and the like from entering.

  Days to Ship:	31 Day(s) or more

• 

  Induction Motor, World K Series (RoHS Non-Compliant)

  ORIENTAL MOTOR

  Induction motor with thermal protector for signals 25 W, 40 W, 60 W, 90 W Lead wire type, type with terminal box.
  [Features]
  ・ Built-in thermal protector for signals
  ・ Global voltage compatible
  ・ CE marking

  Days to Ship:	21 Day(s) or more

• 

  Combined Use Orthogonal Shaft Solid and Hollow Gear Head Single Unit, BH Series

  ORIENTAL MOTOR

  Orthogonal shaft solid / hollow shaft single-unit gearhead for combinations from the BH series.

  Days to Ship:	21 Day(s) or more

• 

  Single Unit Reversible Motor, World K2 Series

  ORIENTAL MOTOR

  Individual motor product from the world K series usable in Japan and throughout the world.
  
  [Features]
  · Conforms to international safety standards.
  · All models are compliant with international safety standards and have overheating protection equipment built in.
  · UL/CSA standards certified.
  Chinese compulsory product authorization system (CCC system) certified.
  CE marking (low voltage directive) compliant.
  · Motor overheat protection device built in.
  Thermal protection, impedance protection.
  · Supports Japan domestic and major foreign country power supply voltages.
  · Can be quickly obtained even overseas when required.
  · Can be combined with orthogonal shaft gearhead to achieve device space saving

  Days to Ship:	16 Day(s) or more

• 

  Parallel Shaft GCH Gearhead for C and B Motors

  ORIENTAL MOTOR

  - Parallel Shaft GCH Gearhead for C and B Motors from ORIENTAL MOTOR.
  - Suitable for High-frequency Operation, the combination of a constantly rotating induction motor and a clutch and brake unit enables high frequency starting and stopping.
  - Compact and Easy to Handle, the compact design simplifies handling and enables the drive unit of the machine to be mounted into a small area.
  - GCH type gearhead is specifically designed for C•B motors and boasts excellent impact resistance, greater strength, and high reliability.
  - GCH is designed for use with GCH-type pinion shaft motor.
  

  Days to Ship:	21 Day(s) or more

• 

  Extra Low Speed Synchronous Motor SMK Series for AC Power Supplies

  ORIENTAL MOTOR

  Extra low-speed synchronous motors are continuous rated synchronization motors capable of instant forward/reverse operation. Has the same structure as a stepping motor, but because it can be easily driven with an alternating current power supply, it is also called an "AC stepping motor."

  Days to Ship:	16 Day(s) or more

• 

  Electromagnetic Brake Motor BH Series: Parallel Shaft Gear Head (Combination Type)

  ORIENTAL MOTOR

  [Features]
  · Smallest size in its class but achieves 200W output.
  · Orthogonal shaft gearhead uses hypoid gears.
  · Lineup of hollow shafts and solid shafts is available to achieve space-saving.
  · Gearhead shaft has tapped hole machining that is convenient for connection to loads.

  Days to Ship:	21 Day(s) or more

• 

  Brake Pack, Single Unit

  ORIENTAL MOTOR

  Control circuit for instant stopping that can rapidly stop induction motors, reversible motors, and motors with electromagnetic brakes.
  
  [Features]
  · Instantly stops the motor with an electronic brake.
  · Has major braking power for stopping in about 0.1 seconds for an individual motor, with the overrun volume staying at 1 to 1.5 rotations or less.
  · A braking current flows into the motor for about 0.4 seconds, but afterwards the motor is automatically cut off from the power supply.
  · It is an electronic brake triggered by a current, so unlike a mechanical electromagnetic brake it has no parts subject to wear, which gives it long life.
  · Optimal for applications such as motor inching (dimensions) operation, etc.
  · SB50W power relay is not required for non-contact types.
  · Has simple wire connections, which helps cut down on the number of times maintenance is needed.
  · It is an electronic brake triggered by a current, so unlike a mechanical electromagnetic brake it has no parts subject to wear, which gives it long life.
  · Optimal for applications such as motor inching (dimensions) operation, etc.
  · SB50W power relay is not required for non-contact types.
  · Has simple wire connections, which helps cut down on the number of times maintenance is needed.
  · SB50W when used in combination with a motor with electromagnetic brakes, couples electronic brakes and electromagnetic brakes together, and so allows the motors to retain the load after instant braking.
  · Optimal for applications that require load retention after instant braking

  Days to Ship:	Same day

• 

  Extra Low Speed Synchronous Motor, SMK Series

  ORIENTAL MOTOR

  Continuous rated synchronization motor capable of instant forward/reverse operation
  
  [Features]
  · Extra low-speed synchronous motors are continuous rated synchronization motors capable of instant forward/reverse operation.
  · Has the same structure as a stepping motor, but because it can be easily driven with an alternating current power supply, it is also called an "AC stepping motor."
  · Rotates precisely in sync with power supply frequency.
  · Rotation speed does not change even if load fluctuates.
  · Capacitor-run motor that can be easily run with just a capacitor (for the SMK5 type, external resistance is also required.
  · Capable of continuous rated drive in both forward and reverse operation.
  · Motor is capable of starting, stopping, and forward/reverse operation within 1.5 cycles of the power supply frequency (0.03 seconds if 50Hz, and 0.025 if 60Hz).
  · Optimal for transport conveyors that start and stop repeatedly, etc.
  · Rotates at a fixed speed even in lowering state.
  · Also appropriate for elevator mechanisms and the like for which a drive with a consistent speed is desired for up/down motion
  ·
  · Extra low-speed synchronous motors have the same structure as stepping motors and use a permanent magnet in their rotors, which gives them slight retention force even as-is.
  · A relatively large retention force can be used by using a gearhead. Convenient for mounting green dampers for absorbing shock, slit panels for origin searching, etc.

  Days to Ship:	16 Day(s) or more

• 

  Speed Control Motor, Reversible Type, K Series

  ORIENTAL MOTOR

  - Speed Control Motor, Reversible Type, K Series from ORIENTAL MOTOR.
  - A lineup that includes single-phase 100 VAC, single-phase 200 VAC, specifications as well as output power of 6 to 40 W is provided.
  - The dimension of square flange can be selected from 60 to 90 mm.
  - Inside an enclosure that is installed indoors (provide vent holes).
  - Operating ambient temperature −10 to +50 °C (+14 to +122 °F) (non-freezing).
  - Operating ambient humidity 85%, maximum (non-condensing).
  

  Days to Ship:	16 Day(s) or more

• 

  Parallel Shaft GC Gearhead for C and B Motors

  ORIENTAL MOTOR

  - Parallel Shaft GC Gearhead for C and B Motors from ORIENTAL MOTOR.
  - Suitable for High-frequency Operation, the combination of a constantly rotating induction motor and a clutch and brake unit enables high frequency starting and stopping.
  - Compact and Easy to Handle, the compact design simplifies handling and enables the drive unit of the machine to be mounted into a small area.
  - GC type gearhead is specifically designed for C•B motors and boasts excellent impact resistance, greater strength, and high reliability.
  - GC is designed for use with GC-type pinion shaft motor.
  

  Days to Ship:	21 Day(s) or more

Loading...