SHINOHARA ELECTRIC Insulated Supports

• 

  Insulating Bushings【100 Pieces Per Package】

  SHINOHARA ELECTRIC

  Insulating support bases that can be used for floating insulation for sequencers, etc.
  [Features]
  · PP (black) *Specification altered from white Duracon.
  A set of both protruding and depressed types, ensuring that the base parts of equipment can be insulated.
  Can be used with M4, M5, M6, M8, M10 and M12 bolts.
  [Applications]
  For floated insulation on the bases of various types of equipment, sequencers and inverters.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Resin Insulator (6kV)【50 Pieces Per Package】

  SHINOHARA ELECTRIC

  A high-pressure insulating support.
  
  [Features]
  · Smaller and lighter than conventional porcelain insulators, with excellent durability. Useful for streamlining.
  Features excellent electrical and mechanical properties.
  · Produced in accordance with JIS standards (JIS-C3851).

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Bar holder【50-100 Pieces Per Package】

  SHINOHARA ELECTRIC

  Use the bus bar to support insulation.
  
  [Features]
  · The copper band and bar holder S are secured and tightened with a mounting bolt for a wide range of band thicknesses.
  · Reduced manual work compared to conventional insulation materials.
  · Copper bands can be mounted from both surfaces in a row by inserting the separator into the interstitial space.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Tilting Bus Bar Support Base RBS-40/RBS-50【1-10 Pieces Per Package】

  SHINOHARA ELECTRIC

  Can be used as a bus support base (sloped bus support base)
  
  [Features]
  · The sloped bus makes wire connection work easy.
  · Allows for a reduction in mounting space.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  FRP Cleat

  SHINOHARA ELECTRIC

  Please use as a mother wire support mount. Made by FRP
  
  [Features]
  ・FRP materials are used as the machining material for a light weight.
  ・Does not rust.
  ・Strong
  ・Good insulation.
  · Machining can easily be performed.
  ・Good resistance to water absorption.
  · Has superior arc resistance.
  ・There is no need for post-machining treatment like with Bakelite.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  PP Holder, G Type【25-50 Pieces Per Package】

  SHINOHARA ELECTRIC

  Can be used to maintain insulation wiring within a high-pressure device. Secured using a cable tie.
  
  [Features]
  · Possible to easily and firmly maintain wiring via tightening with a cable band.
  · A total of three different types of varying heights are available for use with your preferred application.
  · Has excellent insulating properties, is lightweight, and won’t crack.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Three-Stage Support Base (for Low Voltage)【1-25 Pieces Per Package】

  SHINOHARA ELECTRIC

  Can be used as a bus support base. Achieves space savings with three-stage design.
  
  [Features]
  · Can easily support a copper band by simple insertion of square nut(s).
  · Resin molding ensures that the product is lightweight and will not crack.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Branch Bus Bar Support Base (for Low Voltage)

  SHINOHARA ELECTRIC

  Use to support bus lines
  
  [Features]
  · No need to manually treat insulation like before.
  · Made of lightweight, non-breakable plastic.
  · Excellent insulation (for low voltages)

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Mounting Bracket for Indoor Supporting Insulator

  SHINOHARA ELECTRIC

  Can be used as a mounting bracket for indoor support insulators used in bus bars and wires.
  
  [Features]
  - A wide array of different sizes designed to match various mounting hole pitches used for indoor support insulators are available.
  - Different models can be selected based on the intended application, such as a clamp for round wires (high pressure covered wires) or a clamp for bus bar use (vertical support/horizontal support).

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  EP Holders【80-100 Pieces Per Package】

  SHINOHARA ELECTRIC

  Use the emergency power holders for retaining the insulated wires on the inside of high-voltage equipment. This type of holder is secured by bolts on both sides.
  
  [Features]
  · This product has been manufactured based on the criteria that have been established in the guidelines for certification of electrical equipment receiving cubicle-type, dedicated, emergency power supply, enacted by the Japan Electric Association.
  · By using the adapters, wires of 5.5–250 ksi can be fully secured.
  · Excellent insulating properties (creepage plugs-circuit voltage of 22 kV or more), is lightweight, and will not crack.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  EI Supporters

  SHINOHARA ELECTRIC

  Use the EI supporters to support the conductors on the inside of low-voltage equipment. The supporters are manufactured from epoxy resin.
  
  [Features]
  · The load-bearing capacity is superior to that of conventional supporters. Therefore, the scope of application has been expanded further.
  · Has excellent insulating properties, is lightweight, and won’t crack.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  P.P. Holder (High-Voltage In-Apparatus Insulation Cable Supporter)【100 Pieces Per Package】

  SHINOHARA ELECTRIC

  Use the PP holders for retaining insulated wires on the inside of high-voltage equipment.
  
  [Features]
  · The PP holders can fully secure wires by tightening a single screw due to their hinged opening and closing type clamp covers.
  · By using the adapters, wires of various sizes can be fully protected and supported.
  · Has excellent insulating properties (creepage plugs-circuit voltage of 22 kV or more), is lightweight, and won’t crack.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  WS Wire Supporter

  SHINOHARA ELECTRIC

  Use as a wire support base
  
  [Features]
  · Three types, from WS-1 to WS-3. Combine WS-1 with WS-2 to support a wide variety of electrical lines

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Free Cleat Mount

  SHINOHARA ELECTRIC

  Use the free cleat mount for damping wire vibrations.
  
  [Features]
  · Holes have been drilled into the extruded resin material at 20 mm intervals.
  · Cables can be simply supported at intermediate locations by using zip ties.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  20Stage support mount【25 Pieces Per Package】

  SHINOHARA ELECTRIC

  Please use as an ELB ground support mount.
  
  [Features]
  ・By arranging copper bus bars on 2 vertical levels, particularly when ELB and general purpose ground bars need to be distinguished, this product can be used in the ELB vicinity within a small space so as to install 2 ground bars.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Bus Bar Supporters【20 Pieces Per Package】

  SHINOHARA ELECTRIC

  Use the polycarbonate bus bar supporters as supports for bus bars.
  
  [Features]
  · Copper strips can be supported by simply sandwiching the tops and bottoms of the strips.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

Loading...