VENN Electromagnetic Valves

• 

  PS-22 Type, Solenoid Valve (for Steam, Liquid, Air) MOMOTARO II

  VENN

  Production equipment, construction equipment etc. piston type employing SSS & AAS
  
  [Features]
  · Service durability one million cycles cleared: Nominal diameter 25 or less.
  · Applied for steam, water, air, and oil.
  · Applicable under pressure ranging from 0 to 0MPa.
  · Can be mounted flat or upright (nominal diameter 50 or less).
  · A thermo-setting resin highly resistant to heat is used on the coil exterior (nominal diameter 25 or less)

  Days to Ship:	13 Day(s) or more

• 

  PS-25 Type Solenoid Valve (for Steam, Liquids and Air) Stainless Steel Momotaro II

  VENN

  [Features]
  · The stainless steel, threaded PS-25 type series and flange type PF-25 type series, solenoid valves Momotaro II has all the favorable features and same face to face dimensions as the earlier PS-15, and PF-15 type series for ease of replacement during repair, with the added benefit of greater durability.

  Days to Ship:	12 Day(s) or more

• 

  PSE-18 Type Pressure-Resistant Explosion Proof Type Solenoid Valve

  VENN

  [Features]
  · Applicable in explosive and hazardous areas.
  · Equipped with a manual override for ease in testing or actuation during power failure.
  · The direction of conduit tube threads can be changed to make installation or wiring easy.
  · Tube end core can be installed in straight type for preventing rust occurrence.
  · Used where there is danger of explosion from explosive gas.
  · Pilot operated piston system used for a variety of fluids including oil with superior durability.

  Days to Ship:	12 Day(s) or more

• 

  Fixed Water Level Valve (FV Valve) Related Product DS-11N/11LN Type (Valve Opens When Energized)

  VENN

  ·Product compatible with performance standards of Waterworks Law. ·2 types are available: General-purpose product and Pipe end core attachable type.

  Days to Ship:	12 Day(s) or more

• 

  WS-22/22N Type Solenoid Valve (for Liquid and Gas) Momotaro II

  VENN

  Production equipment construction equipment etc. Diaphragm system employing SSS & AAS
  
  [Features]
  · Thermo-setting resin highly resistant to heat is used on the coil exterior (nominal diameter 50 or less).
  · Can be mounted horizontal or vertically (nominal diameter 50 or less).
  · Equipped with a water hammer sensitive mechanism.
  · Applicable in wide range of pressure from 0 to 1.0MPa.
  · Suitable for liquids and gases.
  · Triple the durability compared to conventional products (nominal diameter less than 50).
  · The threaded type WS-22 type series solenoid valve Momotaro II combines all the favorable features and same face to face dimensions of the earlier WS-12 series for replacement ease during repair while offering the added benefit of greater durability.

  Days to Ship:	10 Day(s) or more

• 

  WF-22/22N Type Solenoid Valve (for Liquid and Gas) Momotaro II

  VENN

  Production equipment, construction equipment, diaphragm type employing SSS & AAS
  
  [Features]
  · The flange type WF-22 type series solenoid valve Momotaro II, has all the favorable features and same face to face dimensions as the earlier WF-12 type series allowing ease of replacement during repair, with the added benefit of greater durability.
  · Suitable for liquids and gases.
  · Applicable in wide range of pressure from 0 to 1.0MPa.
  · Equipped with a water hammer sensitive mechanism.
  · Can be mounted horizontal or vertically (nominal diameter 50 or less).
  · A thermo-setting resin highly resistant to heat is used on the coil exterior (nominal diameter 50 or less)

  Days to Ship:	10 Day(s) or more

• 

  WF-25 Type Solenoid Valve (for Liquid and Gas) Stainless Steel Momotaro II

  VENN

  [Features]
  · Stainless steel threaded type WS-25 type series, flange type WF-25 type series solenoid valve Momotaro has the same features and face to face dimensions as the earlier WS-15 type series achieving ease of replacement during repair, with the added benefit of improved durability than the WF-15 type series.
  · Applicable in wide range of pressure from 0 to 1.0MPa.
  · Equipped with a water hammer sensitive mechanism.
  · Can be mounted horizontally or vertically.
  · Thermo-setting resin highly resistant to heat is used on the coil exterior

  Days to Ship:	12 Day(s) or more

• 

  WS-25 Type Solenoid Valve (for Liquid and Gas) Stainless Steel Momotaro II

  VENN

  [Features]
  · Stainless steel threaded type WS-25 type series, flange type WF-25 type series solenoid valve Momotaro has the same features and face to face dimensions as the earlier WS-15 type series achieving ease of replacement during repair, with the added benefit of improved durability than the WF-15 type series.
  · Applicable in wide range of pressure from 0 to 1.0MPa.
  · Equipped with a water hammer sensitive mechanism.
  · Can be mounted horizontally or vertically.
  · Thermo-setting resin highly resistant to heat is used on the coil exterior

  Days to Ship:	10 Day(s) or more

• 

  PS-22C Type Solenoid Valve (for Steam, Liquid, and Air) with Strainer Momotaro II

  VENN

  Production equipment construction equipment etc. Piston system employing SSS & AAS

  Days to Ship:	10 Day(s) or more

• 

  PF-22C Type Solenoid Valve (for Steam, Liquid, and Air) with Strainer Momotaro II

  VENN

  Production equipment, construction equipment etc. piston type employing SSS & AAS
  
  [Features]
  · The flange type PF-22 type series solenoid valve Momotaro II, has the same features and face to face dimensions as the earlier PF-12 type series allowing ease of replacement during repair, while offering the added benefit of greater durability.
  · It is three times more durable compared to the earlier models of our company (nominal diameter 50 or less).
  · Applicable in wide range of pressure from 0 to 1.0MPa.
  · Can be mounted horizontal or vertically (nominal diameter 50 or less).
  · Thermo-setting resin well resistant to heat is used on the coil exterior (nominal diameter 25 or less0.

  Days to Ship:	12 Day(s) or more

• 

  PF-22 Type Solenoid Valve (for Steam, Liquid, and Air) with Strainer Momotaro II

  VENN

  Production equipment, construction equipment etc. piston type employing SSS & AAS
  
  [Features]
  · The flange type PF-22 type series solenoid valve Momotaro, has the same features and face to face dimensions as the earlier PF-12 type series allowing ease of replacement during repair, while offering the added benefit of greater durability.

  Days to Ship:	10 Day(s) or more

• 

  PF-25 Type Solenoid Valve (for Steam, Liquids and Air) Stainless Steel Momotaro II

  VENN

  [Features]
  · 3 times more durable than the conventional stainless steel, threaded PS-25 type model.
  · Applicable in wide range of pressure from 0 to 1.0MPa.
  · Can be mounted horizontally or vertically.
  · Thermo-setting resin highly resistant to heat is used on the coil exterior (nominal diameter 25 or less).
  · The flange type PF-25 type series solenoid valve Momotaro II combines all the favorable features and same face to face dimensions of the earlier PS-15 type series for replacement ease during repair, while PF-15 offering the added benefit of greater durability.

  Days to Ship:	12 Day(s) or more

• 

  PS-16 PF-16 Type Solenoid Valve (for Water) Stainless Steel Momotaro

  VENN

  [Features]
  · Applied with high pressure fluids.
  · Uses stainless steel for high pressure water and steam.

  Days to Ship:	12 Day(s) or more

• 

  PS-17, PF-17 Type Solenoid Valve (for Steam) Stainless Steel Momotaro

  VENN

  [Features]
  · Applied with high pressure fluids.
  · Uses stainless steel for high pressure water and steam.

  Days to Ship:	12 Day(s) or more

• 

  WS-18 Type Rust Proof Solenoid Valve

  VENN

  Equipped with a water hammer sensitive mechanism, the diaphragm type valve structure is suitable in water lines.
  
  [Features]
  · With a built-in straight type tube end core, the steel lined tube end face thread is cut off from fluid.
  · Incrustation and pipe threaded neck fall off is prevented (breaking from corrosion).
  · Equipped with a water hammer sensitive mechanism.
  · Applicable under pressure ranging from 0.02 to 0MPa.
  · Compact and lightweight pilot type solenoid valve

  Days to Ship:	12 Day(s) or more

• 

  PS-18 Type Rust Proof Solenoid Valve

  VENN

  The built-in tube end core in this solenoid valve prevent rusty water (straight type only).
  This piston system has a pilot operated valve, used for a variety of fluids including oil and exhibiting high durability.
  
  [Features]
  · With a built-in straight type tube end core, the steel lined tube end face thread is cut off from fluid.
  · Incrustation and pipe threaded neck fall off is prevented (breaking from corrosion).
  · A highly reliable and durable special piston ring is employed in the valve.
  · Applicable with pressure ranging from 0.02 to 1.0MPa.
  · Compact and lightweight pilot type solenoid valve.

  Days to Ship:	12 Day(s) or more

• 

  WF-35 Type Energy Saving Type Solenoid Valve

  VENN

  Power and energy saving solenoid valve with the integration of a "Self maintenance function" for remaining open with a permanent magnet and a built-in power supply unit.
  
  [Features]
  · Saves energy as it can be used with a general solenoid valve control circuit.
  · Extensive operating voltage range of AC100 to 240V, can operate with free power.
  · As the self maintenance function also operates while the valve is open, coil does not heat up.
  · Equipped with a water hammer sensitive mechanism

  Days to Ship:	12 Day(s) or more

• 

  WS-35 Type Energy Saving Type Solenoid Valve

  VENN

  Power and energy saving solenoid valve with the integration of a "Self maintenance function" for remaining open with a permanent magnet and a built-in power supply unit.
  
  [Features]
  · Compared to the conventional general-purpose models, this series is designed to reduce CO2 emission by 92% and operate at 1/10 to 1/15 less power.
  · Saves energy as it can be used with a general solenoid valve control circuit.
  · Extensive operating voltage range of AC100 to 240V, can operate with free power.
  · As the self maintenance function also operates while the valve is open, coil does not heat up.
  · Equipped with a water hammer sensitive mechanism.

  Days to Ship:	12 Day(s) or more

• 

  DS-10/10H Type Solenoid Valve

  VENN

  Simple structure, compact, direct operated, low capacity solenoid valve, with the model and orifice structure designed for different applications.

  Days to Ship:	12 Day(s) or more

• 

  DS-13/13H Type Solenoid Valve

  VENN

  Simple structure, compact, direct operated, low capacity solenoid valve, with the model and orifice structure designed for different applications.
  
  [Features]
  · DS-10 10H, 12 types of this solenoid valve have a stainless steel body.
  · Note that the applicable pressure and flow rate is different for this series than general solenoid valves.
  · As it is made of stainless steel, it is optimal for various applications and clean media.
  · Compact and lightweight.
  · Simple mechanism and maintenance ease.
  · Ample variations are available.

  Days to Ship:	17 Day(s) or more

• 

  WSE-18 Type Pressure-Resistant Explosion Proof Type Solenoid Valve

  VENN

  Equipped with a water hammer sensitive mechanism, the diaphragm type valve structure is suitable in water and gas lines.
  
  [Features]
  · Applicable in explosive and hazardous areas.
  · Equipped with a manual override for ease in testing or actuation during power failure.
  · The direction of conduit tube threads can be changed to make installation or wiring easy.
  · Tube end core can be installed in straight type for preventing rust occurrence

  Days to Ship:	12 Day(s) or more

Loading...