YOSHITAKE Safety Valves, Control Valves（Max. Applicable Pressure：0.11 to 1）

• 

  Pressure Reducing Valve (For Steam / Low Pressure) GP-1000 Series

  YOSHITAKE

  [Features]
  ▪ SHASE-S106 conforms to standards of pressure reducing valve (Air Conditioning and Health Engineering Society).
  · The spherical shape of the main valve has excellent sealing properties to reduce valve seat leakage significantly (corresponding to the ANSI class IV) .
  · Compared with conventional pressure reducing valves, workability and durability are significantly enhanced.

  Days to Ship:	10 Day(s) or more

• 

  Safety Valve, Relief Valve AL-140 Series

  YOSHITAKE

  [Features]
  ・ It is made entirely of stainless steel, SCS14A (equivalent to SUS316) with excellent corrosion resistance is used for the main part
  ・ The sealed structure prevents fluid from leaking to the outside

  Days to Ship:	12 Day(s) or more

• 

  Air Vent Valve, TA-3/TA-6 Series

  YOSHITAKE

  Operates at a wide range of pressures, allowing use from low to high pressures. The valve seat uses a synthetic rubber disk, preventing leakage from the valve, but as a precautionary measure a screw has been added to mount the copper tube fitting onto the top part of the valve seat.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Lift Type Safety Valve AL-24/AL-24F Series

  YOSHITAKE

  [Features]
  ・ It uses a bronze valve box with a stainless steel valve seat so there is no risk of rust
  ・ Since it is a diaphragm type and has no sliding parts, it operates reliably
  ・ The set pressure range is as wide as 0.1 to 0.7 MPa with 1 spring, the adjusting thread is a handle type, and a butterfly nut is used for the lock nut, so the pressure can be easily changed
  ・ Smooth opening and closing even in continuous operation, it operates accurately with respect to the set pressure and discharges liquid
  ・ Stable operation can be obtained from small flow rate to large flow rate
  ・ According to the specifications, you can choose the material of the diaphragm and valve body from 2 types, NBR and FKM (fluoroelastomer)
  ・ It can be installed vertically, horizontally, top, or bottom

  Days to Ship:	12 Day(s) or more

• 

  Safety Valve, Relief Valve AL-150 Series

  YOSHITAKE

  [Features]
  ・ It is a versatile type that supports fluids such as steam, air, water, and oil
  ・ The pressure division was subdivided, and ultra-precise finishing by advanced technology was realized to pursue the best performance
  ・ Main parts (valve body, valve seat) and adjustment spring are made of stainless steel, and SCS14A (equivalent to SUS316) with excellent corrosion resistance is used for main parts
  ・ The sealed structure prevents fluid from leaking to the outside

  Days to Ship:	10 Day(s) or more

• 

  Air Vent Valve TA-16 Series

  YOSHITAKE

  Provides a stable displacement across a wide range of operating pressures (0.01–1.0 MPa). Its compact size enables mounting in a narrow space.
  
  [Features]
  • All parts are made of stainless steel, except for the valve body disk, gasket, and L-hose fitting (TA-16L), which ensures excellent corrosion resistance and durability.
  • The valve body disk is made of fluororubber, which ensures excellent sealing performance.
  • The TA-16 can easily be connected to an exhaust pipe by mounting the optional pipe connectors.

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Safety Relief Valve, AL-140T Series

  YOSHITAKE

  [Features]
  ・ Since it is entirely made of stainless steel, it has excellent corrosion resistance and durability
  ・ A soft seat is used for the main part, and it has excellent airtightness in the valve seat
  ・ It is ideal for applications where valve seat leakage cannot be tolerated
  ・ The sealed structure prevents fluid from leaking to the outside

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve AL-300/AL-301 Series

  YOSHITAKE

  [Features]
  ▪Mainly used in safety relief values after pressure reducing valves and in safety valves such as small boilers and various pressure containers and instruments.
  · The AL-301 has stainless steel main components (valves and valve seats), so it offers superior corrosion resistance and durability.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Air Vent Valve, TA-16 CVS Series

  YOSHITAKE

  [Features]
  ・ All materials other than valve discs, gaskets, check valves, check valve fitting are made of stainless steel
  ・ Wide operating pressure (0.01 to 1.0 MPa) gives stable displacement
  ・ Compact size allows installation in a small space
  ・ Excellent sealing performance because synthetic rubber is used for the valve disc
  ・ TA-16CVS makes it easy to connect any exhaust pipe by installing optional pipe connection parts
  ・ Since it has a check valve, it does not suck air even when the inlet side is under negative pressure
  [Applications]
  ・ building equipment, factory equipment, housing complex

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Air Vent Valve TA-16L Series

  YOSHITAKE

  [Features]
  ・ All materials other than valve discs, gaskets and L-shaped hose fittings (TA-16L) are made of stainless steel
  ・ Wide operating pressure (0.01 to 1.0 MPa) gives stable displacement
  ・ Compact size allows installation in a small space
  ・ Excellent sealing performance because synthetic rubber is used for the valve disc
  [Applications]
  ・ building equipment, factory equipment, housing complex

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve (Steam), GP-1000S Series

  YOSHITAKE

  [Features]
  ・ It complies with SHASE-S106 pressure reducing valve (The Society of Heating, Air-Conditioning and Sanitary Engineers of Japan) standards
  ・ Since the main valve has a spherical shape, it has excellent sealing performance and the amount of valve seat leakage is significantly reduced (Compliant with ANSI Class IV)
  ・ When compared with conventional pressure reducing valves, workability and durability are significantly enhanced

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves for Steam, GP-1200/GP-1200S Series

  YOSHITAKE

  The spherical shape of the main valve has excellent sealing properties. Valve seat leakage is significantly reduced.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve (For Cold and Hot Water) GD-24GS/GD-24GS-N Series

  YOSHITAKE

  A hanging metal type. A pressure reducing valve without sliding parts. Requires maintenance of consumable parts only.

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves for Hot and Cold Water, GD-26-NE Series

  YOSHITAKE

  Corrosion-resistant materials are used in the liquid-contacting parts. Superior chlorine resistance and reliability for running cold and hot water. The valve utilizes pressure-balanced structure. Therefore, secondary side pressure is maintained at a fixed level without affecting the primary side pressure.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves (Hot and Cold Water), GD-27S/GD-27S-NE Series

  YOSHITAKE

  Stainless steel used for wetted parts, preventing rust. Use of pressure-balanced valve structure means that secondary side pressure is maintained at a certain level without affecting primary side pressure.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve for Water Supply, GD-56-80 Series

  YOSHITAKE

  It's used for the purpose of water supply of hot water for the heat exchanger, and then used maintaining a predetermined water supply pressure. In addition to the pressure reducing function, a backflow prevention function, a negative-pressure operation function, a pressure balancing function, and a strainer are built in.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Nylon Coated Air Release Valve, TA-2C Series

  YOSHITAKE

  Equipped with a rapid exhaust mechanism to rapidly expel from air inside the pipe at the time of initial water throughput, thus easing water throughput.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Nylon Coated Air Release Valve, TA-3C Series

  YOSHITAKE

  Operates at a wide range of pressures, allowing use from low to high pressures. The valve seat uses a synthetic rubber disk, preventing leakage from the valve, but as a precautionary measure a screw has been added to mount the copper tube fitting onto the top part of the valve seat.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Relief Valve, AL-250 Series

  YOSHITAKE

  [Features]
  ・ Since it is entirely made of stainless steel, it has excellent corrosion resistance and durability
  ・ By adopting a dashpot structure, it has a great effect on lines with large pulsations and pressure fluctuations. Chattering and hunting are reduced
  ・ It has stable operation against back pressure changes during continuous blowing

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Relief Valve, AL-260 Series

  YOSHITAKE

  [Features]
  ・ Main parts are made of stainless steel, and all wetted parts are made of corrosion resistant material
  ・ By adopting a dashpot structure, it has a great effect on lines with large pulsations and pressure fluctuations
  ・ Chattering and hunting are reduced
  ・ It has stable operation against back pressure changes during continuous blowing

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150L Series

  YOSHITAKE

  [Features]
  · The main parts (valve body and seat) and adjustment springs are made of stainless steel; in particular, the main parts use SCS14A (equivalent to SUS316) which has excellent corrosion resistance.
  · With lift valve lever types, discharge inspections can be performed manually at a pressure that is 75% or more of the discharge pressure.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150TML Series

  YOSHITAKE

  Uses a lift valve lever mechanism for manually performing blowout inspections. The valve body/valve seat and adjustment spring are made from stainless steel. Anti-corrosive SCS14A is used in the main parts.

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150T-N Series

  YOSHITAKE

  With soft sheeting used in main parts, this valve is optimal for applications that do not permit leakage from the valve seat. The valve/valve seat and adjustment spring are made of stainless steel, with anti-corrosive SCS14A being used in the main section.

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150TR Series

  YOSHITAKE

  A handle-operated valve for changing the pressure easily. Usable as a relief valve.
  
  [Features]
  · The AL-150 is a handle-operated valve for changing the pressure easily. Therefore, this valve can be used as a relief valve.
  · Soft seats are utilized in the main parts for a superior valve seat airtight performance.
  · Optimal for applications in which valve seat leaks are unacceptable.
  · The main parts (valve body and seat) and adjustment springs are manufactured from SCS14 stainless steel (SUS316 EQUIV) with excellent anti-corrosive properties.
  · The sealed construction prevents fluid from leaking outside.

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150T Series

  YOSHITAKE

  [Features]
  · Soft seats are utilized in the main parts for a superior valve seat airtight performance. Optimal for applications in which valve seat leaks are unacceptable.
  · The main parts: valve body, seat. and adjustment springs are made from stainless steel. Anti-corrosive SCS14A is used for the main parts.
  · The sealed construction prevents liquid from leaking outside.

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve AL-300T/AL-301 T Series

  YOSHITAKE

  [Features]
  ・ Fluoropolymer disc is used for the valve, so it has excellent seat airtightness
  ・ The main part (valve body / valve seat) of AL-301T is stainless steel, which has excellent corrosion resistance and durability

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-31/AL-31H Series

  YOSHITAKE

  [Features]
  ・ As it is made of entirely stainless steel, it has excellent corrosion resistance and durability particularly
  ・ AL-31H can handle set pressure up to MAX 2.0 MPa

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-4T Series

  YOSHITAKE

  [Features]
  · Mainly used as a safety relief valve downstream of a pressure reducing valve, safety valve for various pressure vessels and instrumentation equipment, and relief valve for pumps.
  · Fluororesin disks are used in AL-4T valve parts for superior valve seat sealing.

  Days to Ship:	12 Day(s) or more

• 

  Intake Valve - Automatic Intake Valve - VB-10 Series

  YOSHITAKE

  [Features]
  • This valve increases atmospheric pressure by applying air to the pipe from which it is difficult to drain the water. Consequently, water is easily drained during water drainage operations.
  • As a 60-mesh strainer is built into the valve, there are no blockages due to scale.
  • In addition, even if water leaks due to blockage, water can be stopped by tightening the cap.
  • As the highest temperature is 95°C, warm water is also supported.
  • Can be mounted in both vertical and horizontal directions (Downward facing not possible).

  Days to Ship:	16 Day(s) or more

• 

  Intake and Exhaust Valves, TAV-2 Series

  YOSHITAKE

  Quickly prevents air from being sucked back when negative pressure occurs. Automatically works in response to air intake and exhaust requirements.

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  Air Vent Valve TA-16CVA, Series

  YOSHITAKE

  Provides a stable displacement across a wide range of operating pressures (0.01–1.0 MPa). Compact design permits installation in small space. Included check valve prevents air being sucked in on inlet side, even at negative pressure.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Ventilation Valve, TA-2 / TA-5 / TA-5F Series

  YOSHITAKE

  [Features]
  · Includes a rapid air discharge mechanism so during initial water flow, air inside the pipe is rapidly discharged, simplifying water passage.
  · Operates at a wide range of pressures compared to conventional air purge valves, from low to high pressures.
  · In the event of damage to the float valve body or valve seat surface after prolonged use, parts can be replaced from outside, simplifying maintenance and inspections.
  · TA-5 5F includes a main body made of bronze so production of rusty water is not a concern.
  · Negative pressure in the piping or tank automatically produces rapid suction of air, protecting against damage to piping due to vacuum.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves (Steam), GD-6N Series

  YOSHITAKE

  Small, and lightweight, with constant secondary pressure accuracy even at small capacities. · The valve body and valve seat have superior durability thanks to the use of stainless steel.
  
  [Features]
  Constant secondary pressure accuracy does not change even at small capacities.
  · Compact and lightweight.
  · The valve body and valve seat have superior durability thanks to the use of stainless steel.
  · A screen (60 mesh) is built in to protect the valve body and seat from foreign material, pipe scales, and pipe chips.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve (for Steam), GP-1001 Series

  YOSHITAKE

  [Features]
  ・ It complies with SHASE-S106 pressure reducing valve (The Society of Heating, Air-Conditioning and Sanitary Engineers of Japan) standards
  ・ Since the main valve has a spherical shape, it has excellent sealing performance and the amount of valve seat leakage is significantly reduced (Compliant with ANSI Class IV)
  ・ When compared with conventional pressure reducing valves, workability and durability are significantly enhanced

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves (Steam), GP-1002/GP-1002S Series

  YOSHITAKE

  [Features]
  · Conforms to SHASE-S106 pressure reducing valve (The Society of Heating, Air Conditioning and Sanitary Engineers of Japan) standards.
  · The spherical shape of the main valve provides excellent sealing properties to significantly reduce valve seat leakage (corresponding to the ANSI class IV) .
  · When compared with conventional pressure reducing valves, workability and durability are significantly enhanced.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves (Hot and Cold Water, Oil, Air), GD-200/GD-200H Series

  YOSHITAKE

  A high-capacity type that can also handle high pressures. Optimal for use as industrial equipment.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves for Hot and Cold Water / Oil/Air, GD-6 Series

  YOSHITAKE

  Small, and lightweight, with constant secondary pressure accuracy even at small capacities.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves (Hot and Cold water), GD-27-NE Series

  YOSHITAKE

  [Features]
  Corrosion-resistant materials are used for liquid-exposed parts, providing superior chlorine resistance against tap or hot water while minimizing rust.
  · A pressure-balancing valve structure ensures that pressure on the secondary side is kept constant without being affected by pressure on primary side.
  · The product includes a sealed structure so there is no external outflow even if the diaphragm is damaged.
  · Because internal inspection can be performed by disassembling from one direction on the upper side, maintenance and inspection are easy.
  · Pipe mounting direction is unrestricted: horizontal or vertical (however, 125 A and higher can only be mounted horizontally).

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Door-to-Door Water Supply Pressure Reducing Valve and Directional Control Valve, CV-36UP/CV-36UV Series

  YOSHITAKE

  It is a fitting with built-in check that is compatible with the pressure reducing valve GD-46/38 Series for the house-to-house water supply for housing complexes with bypass.

  Days to Ship:	12 Day(s) or more

• 

  Door-to-Door Water Supply Pressure Reducing Valve Fitting, JO-36UP/JO-36UV Series

  YOSHITAKE

  Standard fitting for the GD-46 / 38 series of pressure reducing valves with bypass for door-to-door water supply in housing complexes.

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve for Door-to-Door Water Supply for Condominiums, for Use in Residential Complexes, GD-15 / GD-15C Series

  YOSHITAKE

  This product enables a quiet water supply, so it can be used as a pressure reducing valve for individual water supply in apartment buildings, etc. Can hold a very stable secondary side pressure on the water supply side pressure fluctuation. Small and light with a built in strainer.
  
  [Features]
  • Because the noise of the pressure reduction valve itself has been eliminated, water can be supplied even late at night without issue.
  • Because the supplied water pressure has already been adjusted to a standard set pressure, there is no need for on-site pressure adjustment.
  • The pressure-balancing valve structure ensures that the pressure on the secondary side is kept constant without being affected by the pressure on primary side.
  • Thanks to a built-in strainer, any intermixed trash, sand, etc. is removed, preventing it from getting stuck in the valve area or flowing out to the secondary side.
  • The strainer cap can be removed without using tools. Also, because the strainer and the strainer cap are combined into a single unit, it is easy to perform maintenance inspections inside the valve box without leaving the strainer in.
  • Thanks to its tightly closed structure, no fluids will escape to the exterior even if the diaphragm is damaged.
  • Piping can be mounted in whatever direction you like (horizontally or vertically).

  Days to Ship:	10 Day(s) or more

• 

  Pressure Reducing Valve for Door-to-Door Water Supply for Condominiums, for Use in Residential Complexes, GD-25GJ Series

  YOSHITAKE

  [Features]
  ・ It is a product that realizes low noise water supply as a pressure reducing valve for house-to-house water supply for housing complexes, etc.
  ・ The secondary pressure can be maintained extremely stable against pressure fluctuations on the water supply side, and a strainer is built in, and it is designed to be compact and lightweight, so piping can be handled easily
  ・ Since the noise of the pressure reducing valve itself has been eliminated, it is relieved to supply water even at midnight
  ・ The water supply pressure has already been adjusted to the standard set pressure, so there is no need for on-site pressure regulation
  ・ Since the valve structure uses a pressure balance structure, the secondary pressure is always kept constant without being affected by the primary pressure
  ・ Since it has a built-in strainer, it collects dust, sand, etc., if they are mixed in, and prevents it from getting caught in the valve or flowing out to the secondary side
  ・ The strainer cap can be removed without the use of tools. In addition, since the strainer and strainer cap are integrated, there is no strainer left in the valve box, making maintenance easy
  ・ The closed structure prevents fluid from flowing out even if the diaphragm is damaged
  ・ Since it has a pressure gauge fitting, the pressure gauge can be installed while water is flowing and the set pressure can be easily confirmed

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Air Vent TV-2 Series for Vapor

  YOSHITAKE

  [Features]
  ▪ It prevents air from entering the Weber system. Under any type of pressure from light vacuum state to maximum operating pressure, the air is evacuated automatically under a slightly lower temperature than saturated vapor temperature.
  ▪ Due to the adoption of a hemispherical stainless steel valve, it is protected by using a seal with high protective properties.
  ▪ Due to its compact shape and light weight, it is easy to install.
  ▪ It has been proven to work reliably under a temperature that is slightly lower than the saturated vapor temperature of the operating pressure range.

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve for Water Supply, GD-56R-80 Series

  YOSHITAKE

  Built-in backflow prevention function, negative pressure operation function, pressure balance function, automatic return water drain stopper and strainer; used mainly in hot water heat exchangers.
  
  [Features]
  · The pressure-balancing valve mechanism ensures that the pressure on the secondary side is kept constant without being affected by pressure on primary side.
  · Maintenance and inspection are easy as the strainer, check valve, and strainer cap can be removed without using tools.
  · The piping installation direction (vertical horizontal) is unrestricted.
  · Since the drainage plug is a push operated type, it automatically returns to its original position without having to be returned manually.
  · The GD-91R type pressure reduction valve uses parallel threads for connection, and thus piping can be performed easily using cap nuts.
  · Valve body and the diaphragm have excellent resistance to chlorinated water.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Pressure Reducing Valve for Water Supply, GD-91R-80 Series

  YOSHITAKE

  Equipped with a built backflow prevention function, negative pressure operated function, pressure balance function, automatic return water drain stopper, and strainer, used mainly in hot water heat exchangers.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

Loading...