Indexing Plungers（Page2）

• 

  Indexing Plunger - Fine Thread Type

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  MiSUMi Economy

  Index Plungers Knob Type, Stainless Steel

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  MiSUMi Economy

  Index Plungers Resin Knob Type

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  MiSUMi Economy

  Index Plungers Knob Less Type, Stainless Steel

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s)

• 

  Indexing Plungers, PBX

  NABEYA BI-TECH

  Indexing plungers integrated with a mounting flange. Suitable for mounting to panel surfaces on equipment/devices, etc.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Indexing Plunger - PBY

  NABEYA BI-TECH

  [Features]
  · An indexing plunger with an integrated mounting flange.
  · Suitable for mounting equipment and devices on walls etc.
  ·Pull out the knob and rotate 90° to lock with the pin in a retracted state.
  ·To unlock, pull the knob out slightly and rotate it 90°.
  · Returns to its original position via the action of the integrated spring.
  · For mounting, please use commercially available hex socket bolts, etc.
  · Using slotted holes allows you to adjust the position after mounting.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Indexing Plunger - PDV

  NABEYA BI-TECH

  [Features]
  · Index plunger to control the coming and going of the pin by turning the lever.
  · Standardized three types of operational variations.
  ■ [PDV-A] [PDV-AK]-Standard Type
  · The pin retracts into the body by turning the lever 90°.
  · Turn the lever slightly and the pin returns to its original position via the action of the integrated spring.
  ■ [PDV-B] [PDV-BK]-Retention Type
  · The pin retracts into the body by turning the lever 120°.
  · The pin will not return, even if the lever is released while in the 120° position.
  · Turn the lever slightly in the opposite direction and the pin will returned to its original position via the action of the integrated spring.
  ■ [PDV-C] [PDV-CK]-Lock Function Type
  · The pin retracts into the body turning the lever 120°.
  · The guide pin then fits into the slot on the main body, locking the unit with the pin retracted.
  · To unlock, pull the lever out slightly and rotate it in the opposite direction.
  · Turn the lever slightly and the pin returns to its original position via the action of the integrated spring.
  ■ [PDV-A] [PDV-B][PDV-C]-Without Lock Nut
  · Use loosening prevention service.
  ■ [PDV-AK] [PDV-BK][PDV-CK]-With Lock Nut for Fixing.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Indexing Plunger - PDX

  NABEYA BI-TECH

  [Features]
  · A new type of indexing plunger.
  · Features a lock mechanism.
  · The PDX-A/AK, with knob, have been standardized.
  · For the PDX-A/AK, pin insertion is controlled via the knob.
  · Turning the knob 90° clockwise after pulling it out allows the guide pin to fit into the slot, locking the unit with the pin retracted.
  · To unlock, pull the knob out slightly and rotate it 90° counterclockwise.
  · Returns to its original position via the action of the integrated spring.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Indexing Plunger PHX

  NABEYA BI-TECH

  [Features]
  - Compact indexing plunger.
  - Metal part unexposed after mounting.
  - Nickel-plated pin.
  - Superior abrasion resistance.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Indexing Plungers, PPLY

  NABEYA BI-TECH

  Precise positioning indexing plungers.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Indexing Plunger PSX

  NABEYA BI-TECH

  Short type that can be mounted directly to a thin frame.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Indexing Plungers, PSY

  NABEYA BI-TECH

  The pin can be locked in its retracted position by pulling and rotating the knob 90 degrees. To unlock, pull the knob slightly and rotate it by 90 degrees. The built-in spring returns the pin to its origin.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Indexing Plunger PCX

  NABEYA BI-TECH

  [Features]
  - A new type of indexing plunger.
  - Pin usually retracted in the main unit.
  - With lock mechanism.
  - The knob-type PCX-A/AK and the key-type PCX-B/BK are standardized.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Indexing Plunger PLX

  NABEYA BI-TECH

  Two types of standardized stroke for each pin diameter. For indexing or positioning.
  
  [Features]
  - Two types of standardized stroke for each pin diameter (except for ⌀10 and ⌀12).
  - For indexing or positioning.
  - Pin is hardened (steel) or nickel-plated (stainless steel). Excellent abrasion resistance.
  - If the threaded part is too long for the mounting surface, use the PXC indexing plunger collar instead.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Indexing Plunger PPX

  NABEYA BI-TECH

  [Features]
  - Indexing plunger that can be mounted on a thin plate.
  - Optimal for positioning and fixing the cases/covers of electronic/communication equipment.
  - Fixing nut can be removed.
  - Mount with a plate clamped with the fixing nut.
  - Two types of pin lengths standardized for each pin diameter.
  - Nickel-plated pin.
  - Superior abrasion resistance.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Indexing Plungers, PPY

  NABEYA BI-TECH

  Indexing plungers for attaching to thin plates. Optimal for positioning and securing casings and covers on electronics and telecommunications equipment.
  
  [Features]
  · Removable retaining nut.
  · Plates are mounted sandwiched between the retaining nuts.
  · The pin can be locked in its retracted position by turning the knob 90 degrees while it is extended.
  · The lock is released by pulling the knob out slightly and turning it 90 degrees.
  · The built-in spring returns the pin to its origin.
  · Two types of pin length are standardized for each pin diameter.
  · The pins are nickel-plated.
  · Superior abrasion-resistant properties.
  · Locking nut: SUM22L, trivalent chromate treated.
  · Pin: nickel plated, polished.
  · Spring: SUS301.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Indexing Plunger PXVS

  NABEYA BI-TECH

  [Features]
  - Stainless steel.
  - Superior corrosion resistance.
  - Turn the lever to control the pin insertion.
  - Retractable into the body with a 180° turn of the lever.
  - Lever can be locked with a notch machined in the main body.
  - Ergonomic lever cap attached to the PXVS-B/BK.
  - Nickel plating for good abrasion resistance.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Indexing Plunger PXZ

  NABEYA BI-TECH

  [Features]
  - All main body threads can be embedded in equipment; only the knob is exposed.
  - Attractive look.
  - Hardened (steel) or nickel-plated (stainless steel).
  - Superior abrasion resistance.
  - New standardization for PXZS-Z and PXZS-SK with stainless steel knob.
  - Use a locking service for fixing indexing plungers.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Index Plunger (Short Nose-Lock Type) (NDXNS-L)

  IMAO CORPORATION

  A nose-lock type for holding the pin in its retracted position. Short threaded section — optimal for attaching to plate materials, etc.
  
  [Features]
  · Hand-operated indexing plungers. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.
  · The nose-lock locks the nose in its retracted position by rotating the knob 90 degrees while it is extended.
  · Thread relief processing has been implemented to the threads.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Index Plunger (Knobless) (NDX-N)

  IMAO CORPORATION

  The operating part can be operated remotely by screw connection. Available in steel and stainless steel.
  
  [Features]
  · Hand-operated spring plungers. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.
  · The operating threads can be connected for remote operation, etc.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Index Plunger (Nose-Lock Type) (NDXN-L)

  IMAO CORPORATION

  A nose-lock type for holding the pin in its retracted position. Available in different nose types: hardened, non-hardened, and stainless steel.
  
  [Features]
  · Hand-operated spring plungers. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.
  · The nose-lock locks the nose in its retracted position by rotating the knob 90 degrees while it is extended.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Index Plunger (Short Type) (NDXNS)

  IMAO CORPORATION

  Short threaded section — optimal for attaching to plate materials, etc.
  
  [Features]
  · Hand-operated indexing plungers. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.
  · Thread relief processing has been implemented to the threads.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Engineering Plastic Index Plunger (EIP)

  IMAO CORPORATION

  Manufactured entirely from plastic—except for the nose. Optimal for use in non-industrial healthcare equipment, welfare devices, and furniture applications.
  
  [Features]
  · Lightweight plastic body.
  · Optimal for rust-intolerant places.
  · Hand-operated spring plungers. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Index Plunger (SDX)

  IMAO CORPORATION

  [Features]
  · No hexagonal part for mounting in confined spaces.
  · Installed using a dedicated wrench (SDX-Z).
  · Full thread type.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Index Plunger (Knobless)

  IMAO CORPORATION

  The operating part can be operated remotely by screw connection. No hexagonal part for mounting in confined spaces. Available in steel and stainless steel.
  
  [Features]
  · Hand-operated spring plungers. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.
  · The operating threads can be connected for remote operation, etc.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Index Plunger (Long Stroke) (NDXNE)

  IMAO CORPORATION

  Long nose for deep insertion. Available in steel and stainless steel.
  
  [Features]
  · Hand-operated spring plungers. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Engineering Plastic Index Plunger (Nose-Lock Type)

  IMAO CORPORATION

  A nose-lock type for holding the pin in its retracted position. Manufactured entirely from plastic—except for the nose. Optimal for use in non-industrial healthcare equipment, welfare devices, and furniture applications.
  
  [Features]
  · Lightweight body made from plastic.
  · Optimal for rust-intolerant places.
  · Hand-operated spring plungers. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.
  · The nose-lock locks the nose in its retracted position by rotating the knob 90 degrees while it is extended.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Index Plunger (WDX)

  IMAO CORPORATION

  Welding and adhesion type.
  
  [Features]
  · Hand-operated spring plungers. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.
  · The nose-lock locks the nose in its retracted position by rotating the knob 90 degrees while it is extended.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Index Plunger (Nose-Lock Type) (NDXN-L-ASUS)

  IMAO CORPORATION

  A nose-lock type for holding the pin in its retracted position. Made entirely from stainless steel, this product is optimal for places requiring rust prevention and clean environments. Available in two nose types: hardened and non-hardened.
  
  [Features]
  · Hand-operated spring plungers. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.
  · The nose-lock locks the nose in its retracted position by rotating the knob 90 degrees while it is extended.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Indexing Plungers Flange Type IPF

  KONISHI

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. An index plunger with a fixed countersunk screw.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Indexing Plunger, Simple Ring Type IPR

  KONISHI

  Indexing plunger with a ring instead of a knob.
  [Features]
  ・ By pulling the ring, the center pin will be retracted, and when you release it, the force of the spring will return the center pin to its original position
  ・ It can be used for indexing and positioning jigs

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Indexing Plungers Simple Type IP

  KONISHI

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Indexing Plungers Simple Lock Type IPL

  KONISHI

  Pull the knob and rotate it 90° to lock the product with the center pin in retracted state. Return the knob to its original position to release the lock; the center pin returns to its original position.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Indexing Plungers Without Hexagonal Collar IPN, IPN-Sus

  KONISHI

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions. All screws are embedded into the device, only leaving the knob on the surface and making it look more attractive.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Indexing Plunger IP-1

  KONISHI

  By pulling the knob, the center pin will be retracted, and when you release your hand, the center pin will return to its original position due to the spring force. It can be used for indexing and positioning jigs.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Indexing Plunger IP-2

  KONISHI

  Pull the knob and rotate it 90° to lock the product with the center pin in retracted state. Return the knob to its original position to release the lock; the center pin returns to its original position.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Indexing Plunger IP-5

  KONISHI

  [Features]
  ・ An Indexing plunger with a grip ball glued to the knob
  [Applications]
  ・ Convenient for jig indexing and positioning

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Indexing Plungers IPW

  KONISHI

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions when welding or fuse mounting.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Indexing Plungers IPWN

  KONISHI

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions when welding or fuse mounting.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Indexing Lever Plungers ILP

  KONISHI

  Rotate the lever 180° to retract the center pin and engage the lock. Use to calculate and adjust the position of jigs.

  CAD ：

  2D

  Days to Ship:	17 Day(s) or more

• 

  Indexing Plunger IP-4

  KONISHI

  This is a knobless type indexing plunger (IP-4). A lock nut is included.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Indexing Plunger Short Type (with Lock Function) IPSL

  KONISHI

  [Features]
  · Pulling the knob and rotating it by 90° locks the product with the center pin in a retracted state.
  · Returning the knob to its original position releases the lock and the center pin returns to its original position.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Indexing Plungers Flange Type (with Lock Function) IPFL

  KONISHI

  Pulling the knob and rotating it 90° locks the product with the center pin in a retracted state. Returning the knob to its original position releases the lock and the center pin returns to its original position. Flat head screw fixed type indexing plungers.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Indexing Plunger (Stainless Steel) IP-1-Sus

  KONISHI

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Indexing Plunger (Stainless Steel) IP-2-Sus

  KONISHI

  Pull the knob and rotate it 90° to lock the product with the center pin in retracted state. Return the knob to its original position to release the lock; the center pin returns to its original position.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

Loading...