Flexible Hoses（Applicable Fluid：Water）

• 

  Flexible Hoses/High Pressure

  MISUMI

  [Features]·A high-pressure type flexible hose with high heat and pressure resistance.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Flexible Hose/Low Pressure/Non-welded

  MISUMI

  [Features]·A low-pressure (non-welded) flexible hose suitable for vibration absorption.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Flexible Hoses/Medium Pressure

  MISUMI

  A flexible hose that is lighter than high pressure types and has improved usable pressure.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  NK-1400 Pipe‑End Type Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  [Features]
  · Add slits to the specified pipe when using for butt welding, on-site welding of fittings, refrigerant piping of air-conditioning equipment, or with mufflers, to allow connect via an insert band clamp.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  NK-1500 Male Nipple Type Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  Standard flexible hose with tapered male threads at both ends.
  
  [Features]
  · Structured with male nipples (R) welded to the tube.
  · Applicable tubing: STD / SA (flexible) / CLT (ultra-flexible).
  · Select the tube according to use.
  · Length: 250 mm to 10M.
  · Note: Please contact MISUMI-VONA for more information.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  NK-1000 Standard Union Type Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  A standard flexible hose with unions at both ends.
  
  [Features]
  · Structured with a union collar welded to the tube and a union fitting attached.
  · Applicable tubing: STD.
  · Opening diameter: 8A to 65A, or 80A or above for NK-1200.
  · Length: 2200 mm to 10M. Note: Please contact MISUMI-VONA for more information.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Flexible Hoses/Fluoro Resin

  MISUMI

  [Features]·A flexible fluoropolymer hose high heat and chemical resistance.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  NK-1800 Sanitary Flange (Ferrule) Type Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  For adjusting piping errors, absorbing displacement, and dampening vibration. The flanges for the STD type are welded on to the tube. The SNT type is a flexible, lightweight and high performance structure in which there is no gap between it and the inner surface and few steps between the flange and tube.

  Days to Ship:	11 Day(s) or more

• 

  Flexible Metal Hose, Flange Type, 10K, Non-Welded, TF-23000 Series

  TOFLE

  [Features]
  ● A Ministry of Land, Infrastructure, Transport and Tourism specification.
  ● Weld-free joints. The long effective length of the tube makes it useful for tubing suffering from vibrations and repetitive displacement.
  ● The parts that come into contact with water are manufactured from stainless steel, helping prevent rusting and giving durability.
  
  [Applications]
  ● Absorbing piping misalignments and vibration.

  Days to Ship:	8 Day(s) or more

• 

  NK-5500・5600, flange type (ring stopper) flexible hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  For adjusting piping errors, absorbing displacement, dampening vibration and for responding to motion. The flange is mounted by welding the lap joint and pipe on to the tube. A wire braid structure with adequate pressure resistance functionality. Suitable for uses with long lengths.

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  NK-6300 Flange Type (Non-welded) Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  For adjusting piping errors, absorbing displacement, and dampening vibration. Features non-welded flanges. The tube is sealed at both ends. Conforms to Ministry of Land, Infrastructure, Transport and Tourism specifications.
  
  [Features]
  · Features non-welded flanges. The tube is sealed at both ends.
  · Conforms to Ministry of Land, Infrastructure, Transport and Tourism specifications.
  · Applicable tubing: SA, opening diameter: 25A to 300A, length: 150 mm to 3 m.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Faucet and related products flexible tube flange ring type free tube stainless steel nut

  MIYAKO

  High-quality flexible tubing components by Miyako Inc., a dedicated manufacturer of piping and engineering plastics that are able to stand up to use in water circulating systems.

  Days to Ship:	12 Day(s) or more

• 

  Braided Hose with Non-welding Union Type Made of Stainless Steel, Z-10000NW

  ZENSHIN

  A non-weld all-stainless steel union type flexible hose.
  
  [Features]
  · Features a union fitting for absorbing displacement.

  Days to Ship:	16 Day(s) or more

• 

  Flexible Metal Hose, Flange Type, 10K, Non-Welded, TF-48000 Series

  TOFLE

  [Features]
  ● A Ministry of Land, Infrastructure, Transport and Tourism specification.
  ● Features reliable large surface pressure seals.
  ● Completely weld-free assembly. No material degradation due to welding and no rusting.
  
  [Applications]
  ● Absorbing piping misalignments and vibration.

  Days to Ship:	12 Day(s) or more

• 

  Tubes/Flexible Tube/Bellow Shape Type

  MISUMI

  [Features]·A flexible tube for water and hot water. [Material]·SUS304.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Flexible Hoses/Fluoro Resin/High Flex

  MISUMI

  [Features]·A flexible fluoropolymer hose with high flex resistance.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Low Pressure Type/Non-welded

  MISUMI

  [Features]·A low-pressure (non-welded) flexible hose suitable for vibration absorption.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Flexible Tube (T Type)

  ASOH

  A flexible tube with a single-ridged structure. Use for fixed piping which is used for hot water or regular water supplies.

  Days to Ship:	11 Day(s) or more

• 

  Flexible Tube (H Type)

  ASOH

  A flexible tube with a single-ridged structure. Use for fixed piping which is used for hot water or regular water supplies. A flexible tube which, in comparison to the T type, features a standard internal diameter and a thick outer diameter.

  Days to Ship:	11 Day(s) or more

• 

  Wound Flexible Hose

  ONDASEISAKUSYO

  ONDA MFG., flexible hose, winding flexible hose, FCP Series.

  Days to Ship:	16 Day(s) or more

• 

  NK-1100 Fit Union Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  For adjusting piping errors, absorbing displacement, and dampening vibration.
  
  [Features]
  · A structure featuring a union fitting assembled by the manufacturer's own proprietary swaging method.
  · Applicable tubing: Dedicated-fit tubing.
  · Opening diameter: 10A to 50A.
  · Length: 200 mm to 8 m. Note: Please contact MISUMI-VONA for more information.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  NK-1300 Female Socket Type Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  For adjusting piping errors, absorbing displacement, dampening vibration and for responding to motion. Structured with the female socket (Rc) welded to the tube.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  NK-2500 and 2600 General Purpose Flange Type Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  For adjusting piping errors, absorbing displacement, dampening vibration and for responding to motion. The flange is mounted by welding the lap joint and pipe on to the tube.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  NK-4000/4100 Flange model (ribbon parade) flexible hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  For adjusting piping errors and absorbing displacement. The flange is mounted by welding the lap joint and pipe on to the tube.
  
  [Features]
  · The flange is mounted by welding the lap joint and pipe on to the tube.
  · The characteristic feature of the ribbon braid is its minimal elongation.
  · Applicable tubing: STD/SA, opening diameter: 80A to 350A, length: 200 mm to 3M. Note: Please contact MISUMI-VONA for more information.

  Days to Ship:	15 Day(s) or more

• 

  NK-FJ-A Nipple Type Fluoro Resin Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  For adjusting piping errors, absorbing displacement, and for chemical liquids. The flexible parts are made of fluororesin. Features fixed male threads at both ends.·

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  NK-FJ-F Flange Type Fluorine Resin Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  For adjusting piping errors, absorbing displacement, and for chemical liquids. Loose flanges at both ends. The parts that come into contact with liquids are made of fluororesin.
  
  [Features]
  · Loose flanges at both ends. The parts that come into contact with liquids are made of fluororesin.
  · Applicable fluids: Air, water, and chemicals. Note: Limited to fluids that will not permeate fluororesin.
  · Standards: JIS/JPI/ANSI/DIN.
  · Other special flanges.
  · Length: 250 mm to 6 m.
  · Opening diameter: 15A to 100AM
  · Operating temperature: -50°C to 180°C, operating pressure: 0.1 to 1.0MPa

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Braided Hose with Non-weld General-purpose Union Type Z-9000NW

  ZENSHIN

  Non-weld general-purpose union type braided flexible hose.
  
  [Features]
  · General purpose: Features a union fitting for absorbing displacement.

  Days to Ship:	16 Day(s) or more

• 

  Soflex AQ Flexible Pipe Male Screw Adapter

  HITACHI KINZOKU

  Flexible tubes with enough rigidity to support themselves. Tubing for connecting to equipment with which it is difficult to match sizes. Enables tubing in confined spaces without elbow fittings as it can bend.

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  Soflex AQ Flexible Pipe Female Screw Adapter

  HITACHI KINZOKU

  Flexible tubes with enough rigidity to support themselves. Tubing for connecting to equipment with which it is difficult to match sizes. Enables tubing in confined spaces without elbow fittings as it can bend.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Soflex AQ flexible pipe Zlok adapter

  HITACHI KINZOKU

  [Features]
  · Flexible tubes with enough rigidity to support themselves.
  · Tubing for connecting to equipment with which it is difficult to match sizes. Enables tubing in confined spaces without elbow fittings as it can bend.
  · Easy to set up with flexible cutters, coating cutters, and other conventional tools such as spanners and monkey wrenches.
  · The flexible tube is made using highly durable and corrosion-resistant stainless steel (SUS316L) and has been given a soft PVC coating.
  · Its double-seal structure provides excellent sealing performance.
  · Furthermore, heat and chemical resistant fluoro rubber is used in the O-ring material.
  · The nuts feature loosening-prevention mechanisms.
  · The flexible tubes are available in three coat colors: blue, orange, and ivory.
  · Use according to the application.

  Days to Ship:	18 Day(s) or more

• 

  Tapered Male Threaded Flexible Hose Cut Joint, FCJ1 Type

  ONDASEISAKUSYO

  [Features]
  ・ Long stainless steel flexible pipe fitting that does not require a dedicated flanging Tool
  ・ A long stainless steel flexible pipe and fitting that can be bent easily and can be cut freely to the required length.
  ・ Just tightening the nut with a wrench makes the reliable flanging be completed at the same time as tightening.
  ・ It can be tighten until the end surface of the nut touches the body.
  ・ No torque management required
  ・ The double seal structure with flat seal and O-ring shows stable sealing performance.
  ・ Since the hexagonal split ring is fixed inside the main body, the pipe will not rotate when tightening the nut.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  NK-1100C Core Union Type Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  [Features]
  · A union with integrated core is connected to the stainless steel tube, giving excellent protection against corrosion.
  · Applicable temperature: <40°C for water supplies, <85°C for hot water supply.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  NK-1900 Union/Nipple Type Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  Standard flexible hose with union and tapered male threads.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  NK-2000 Slim Union Type (Metal Touch) Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  Standard flexible hose with selectable end fittings.
  
  [Features]
  · Structured with the slim union (female touch type) welded to the tube.
  · Applicable tubing: STD / SA (flexible) / CLT (ultra-flexible).
  · Length: 200 mm to 10M.

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  NK-2300PT Pipe‑End Type Vacuum Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  For adjusting piping errors, absorbing displacement, dampening vibration and for responding to motion. Pipe end fittings on both ends. Can be welded to flareless fittings.
  
  [Features]
  · Pipe end fittings on both ends. Can be welded to flareless fittings.
  · Applicable tube: CLT (ultra-flexible).
  · Opening diameter: 3.15 to 12.7 mm.
  · Length: 100 mm to 3 m
  · Applicable fluids: Gases, water, and air. Note: Limited to fluids that do not corrode stainless steel.
  · Specification temperature: -196°C to 300°C

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  NK-3100 Standard Flange Type Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  For adjusting piping errors and absorbing displacement. The flange is mounted by welding the dedicated collar on to the tube. Supports Ministry of Land, Infrastructure, Transport and Tourism specifications.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  NK-3300 Flange Type (Non-welded) Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  For adjusting piping errors, absorbing displacement, and dampening vibration. Flanges are swaged and connected using the manufacturer's proprietary technology.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  NK-3400 Light Union Type (non-welding) Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  For adjusting piping errors, absorbing displacement, dampening vibration and for responding to motion. A structure featuring dedicated lightweight unions swaged and mounted on to the tube.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  NK-3500 Lever Coupling type Flexible Hoses

  NANGOKU FLEXIBLE HOSE INDUSTRY

  For adjusting piping errors, absorbing displacement, dampening vibration and for responding to motion. Features lever couplings at both ends. Suitable for filling moving type tanks from storage tanks etc.

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  NK-3600 One Touch Coupler Model Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  For adjusting piping errors, absorbing displacement, and dampening vibration. Single-action couplers (with valve mechanism) are attached to both ends. Ideal piping that is frequently connected and disconnected.

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  NK-5000·5100 flange type (band stopper) flexible hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  For adjusting piping errors and absorbing displacement. The flange is mounted by welding the lap joint and pipe on to the tube. The ribbon braid is clamped using bands. Suitable for large opening diameters with little elongation.
  
  [Features]
  · The flange is mounted by welding the lap joint and pipe on to the tube.
  · The ribbon braid is clamped using bands. Suitable for large opening diameters with little elongation.
  · Applicable tubing: STD/SA.
  · Opening diameter: 80A to 600A, length: 300 mm to 3 m.
  · Note: Please contact MISUMI-VONA for more information.

  Days to Ship:	15 Day(s) or more

• 

  NK-9500 Fire and Disaster Management Agency Notice Article 31 (for fire extinguishing piping) Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  Conforms to "FESC standards B103-09/B104-09" as prescribed by the Fire Equipment and Safety Center of Japan (association).

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  NK-FJ-B Male Union Fluorine Resin Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  For adjusting piping errors, absorbing displacement, and for chemical liquids. The flexible parts are made of fluororesin. Features male threaded unions at both ends.

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  NK-FJ-C Female Union Type Fluororesin Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  [Features]
  · For adjusting piping errors, absorbing displacement, and for chemical liquids. The flexible parts are made of fluororesin. Features female threaded unions at both ends.
  · Applicable fluids: Air, water, and chemicals. Note: Limited to fluids that will not permeate fluororesin.
  · Standards: JIS/ANSI/DIN.
  · Length: 250 mm to 10M.
  · Operating temperature: -50°C to 180°C.
  · Operating pressure: 0.1 to 1.0MPa.

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  NK-FJ-S Sanitary Flange Fluorine Resin Flexible Hose

  NANGOKU FLEXIBLE HOSE INDUSTRY

  For adjusting piping errors, absorbing displacement, and for chemical liquids. The flexible parts are made of fluororesin. Features sanitary flanges (ferrules) at both ends.

  CAD ：

  2D

  Days to Ship:	20 Day(s) or more

Loading...