Air Blow Guns, Nozzles for Air Blow Guns,（Page2）

• 

  Can Be Used With Air Blow Gun / Suspended Air Blow Gun, Adjustable Nozzle

  KURITA

  Although compact, it has air flow approximately 4 times a normal nozzle
  
  [Features]
  · Freely bends a large amount

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Air Gun/Tree Gun Usable Screw Part G1/8 Volume Increase Nozzle

  KURITA

  A nozzle that sucks in air from a side hole and sprays it in a conical shape.

  Days to Ship:	9 Day(s) or more

• 

  Air Tool Series, Coiled Hose, CH Series

  KURITA

  Equipped with cap nuts (G1/4) on both ends.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Air Tools Series-"TSURU-RING" SG Series

  KURITA

  Hose-hanging spring Tsururing SG Series.

  Days to Ship:	Same day or more

• 

  for Air Tool Series Extension Nozzle Adapter Spout Gun SP Series SP100 and 200

  KURITA

  Can also be used with air guns.
  
  [Features]
  · Can also be used with air guns.
  · Using the long nozzle adapter lets you feed water over long distances.

  Days to Ship:	16 Day(s) or more

• 

  Air Tool Series Spout Gun SP Series SP200

  KURITA

  It is a drill-shaped type. [Body Material]Die-cast aluminum ADC12 equivalent

  Days to Ship:	16 Day(s) or more

• 

  Air Tool Series Engine Cleaner EC Series EC100

  KURITA

  Liquid measure adjustable type.
  
  [Features]
  ▪ Mist type.
  · Adjustment of the cleaning liquid is possible

  Days to Ship:	10 Day(s) or more

• 

  Air Tool Series Engine Cleaner EC100S/L

  KURITA

  Adjustment of the cleaning liquid is possible.
  
  [Features]
  · Adjustment of the cleaning liquid is possible

  Days to Ship:	16 Day(s) or more

• 

  Air Tool Series Engine Cleaner EC Series EC200

  KURITA

  Combination type.
  
  [Features]
  ▪ Liquid measure adjustable type.
  ▪ One-touch toggle switch for cleaning and drying

  Days to Ship:	10 Day(s) or more

• 

  Air Coiled Hose, with Fittings

  WTB

  Hose and fittings are connected by pushing the fittings onto the hose for a simple attachment.

  Days to Ship:	1 Day(s)

• 

  Engine Cleaner

  WTB

  [Features]
  · Compared to the conventional engine cleaners, durability is improved with use of a brass suction pipe.
  · With a nozzle of 2 mm in diameter, injection output is outstandingly strong, and the suction hose is a standard set of silicone tubes.
  · The hose does not harden after usage.

  Days to Ship:	12 Day(s)

• 

  Ultra Lightweight Magnesium Series WT91D

  WTB

  Built-in air flow rate control function. Powder metallic coating applied.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Air Duster DS-3

  MEIJIKIKAI

  The noise level is approx. 10 dB lower than the conventional one. The amount ejected from the nozzle is 3 times the amount of air consumed.
  [Features]
  ・ DS-3: button type
  ・ DS-3K: button type, quick joint type

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Air Duster DS-3T

  MEIJIKIKAI

  The noise level is approx. 10 dB lower than the conventional one. The amount ejected from the nozzle is 3 times the amount of air consumed.
  [Features]
  ・ The noise level is approx. 10 dB lower than the conventional product.
  ・ Approx. 3 times as much air consumed is ejected from the nozzle tip
  ・ It reduced air consumption by 14% compared to conventional products
  ・ Collision efficiency increased by 7% compared to conventional products (At 0.5 MPa)
  ・ The same power can be output with less air consumption, which has the effect of reducing compressor power consumption.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Air Duster DS-3TF

  MEIJIKIKAI

  The noise level is approx. 10 dB lower than the conventional one. The amount ejected from the nozzle is 3 times the amount of air consumed.
  [Features]
  ・ The noise level is approx. 10 dB lower than the conventional product.
  ・ Approx. 3 times as much air consumed is ejected from the nozzle tip
  ・ It reduced air consumption by 14% compared to conventional products
  ・ Collision efficiency increased by 7% compared to conventional products (At 0.5 MPa)
  ・ The same power can be output with less air consumption, which has the effect of reducing compressor power consumption.

  Days to Ship:	13 Day(s) or more

• 

  Air Duster DS-3TK-J

  MEIJIKIKAI

  Noise reduced by 10dB compared with conventional models. The ejection amount from the nozzle is three times greater than air consumption.
  
  [Features]
  · Noise level decreased by approximately 10 dB compared to the conventional part.
  · Air jet amount approximately triple the air consumption that comes out from the nozzle tip.
  · When compared with conventional products, 14% of air consumption is saved.
  · When compared with conventional products, collision efficiency is increased by +7% (at 0.5MPa).
  ･ Effectively Reduces the Power Consumption of Compressors by Exerting the Same Power with Less Air Consumption.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Air Duster DS-3TK-JX

  MEIJIKIKAI

  Long nozzle with tip angles ranging from 0° and 45°.
  
  [Features]
  · Trigger type, quick joint type, jet nozzle, long handle type and two-bending angles, 0° and 45°.

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Air Duster DS-3TX

  MEIJIKIKAI

  The noise level is approx. 10 dB lower than the conventional one. The amount ejected from the nozzle is 3 times the amount of air consumed.
  [Features]
  ・ The noise level is approx. 10 dB lower than the conventional product.
  ・ Approx. 3 times as much air consumed is ejected from the nozzle tip
  ・ It reduced air consumption by 14% compared to conventional products
  ・ Collision efficiency increased by 7% compared to conventional products (At 0.5 MPa)
  ・ The same power can be output with less air consumption, which has the effect of reducing compressor power consumption.

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Spring Duster Set SPD

  MEIJIKIKAI

  Please contact us to discuss shorter delivery times.
  Noise reduced by 10dB compared with conventional models. The ejection volume from the nozzle is three times greater than the amount of air consumed.
  
  [Features]
  · A large amount of secondary air is sucked in with a small amount of compressed air so a strong suction force can be obtained.
  · Produces blowing and suction action when the ball valve is closed and opened, respectively.
  · Because compressed air is used as the power source and there are no rotating parts, failures are minimized and the design is explosion-proof and safe.
  · The pass circuit has no irregularities and there is risk that the inside will clog.
  · VCM-DF-1 has an air pipe that freely bends by hand, and therefore can be used at an angle of your choice.

  Days to Ship:	13 Day(s) or more

• 

  Vaculeaner VCM-DF With Duster

  MEIJIKIKAI

  [Features]
  ・ A large amount of secondary air is sucked in with a small amount of compressed air, and a large suction force is obtained
  ・ When the ball valve is closed, it blows away, and when it is opened, it sucks
  ・ Since compressed air is the power source and there are no rotating parts, there are few failures, and it is an explosion-proof type and safe
  ・ The passage circuit is cylindrical and has no roughness, so there is no worry of clogging inside
  ・ VCM-DF-1 can be used at any angle as the air pipe can be bent freely by hand.
  [Applications]
  ・ Cleaning: Sucking and blowing off metal cutting chips, polishing powder, sand, sawdust, sewing thread waste, etc.
  ・ Collecting: Collecting barrel sand, sandblast sand, small parts, etc.
  ・ Cooling: Cooling molds, castings, forgings, welds, etc., and removing foreign objects by suction

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Foot Valve

  MEIJIKIKAI

  Please contact us to discuss shorter delivery times.
  
  [Features]
  • Foot valve with maximum operating pressure of 0.69 MPa.

  Days to Ship:	16 Day(s) or more

• 

  Air Duster M305-FA

  MEIJIKIKAI

  Noise reduced by 10dB compared with conventional models. The ejection volume from the nozzle is three times greater than the air consumption volume.
  
  [Features]
  · Maximum operating pressure of 1.57 MPa.
  · A rubber tip nozzle (RC-20) and a transparent shield nozzle (SN-22) are provided as options only for M305.

  Days to Ship:	13 Day(s) or more

• 

  Excel Jun Blow Gun

  MAEDA SHELL SERVICE

  Removes 99% of 0.01 μm microparticles. An air blower which meets the highest quality standards.

  Days to Ship:	1 Day(s)

• 

  Cartridge (Hollow Fiber Membrane Filter)【3 Pieces Per Package】

  MAEDA SHELL SERVICE

  A replacement filter for MAEDA SHELL SERVICE Excel Jun Air Blow Gun.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Air Duster, AG-6

  ANESTIWATA

  [Applications]·Dust removal from machines and tools, blowing off cutting chips. [Main Body Material]aluminum

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Air Duster, AG-61

  ANESTIWATA

  Convenient for dispersing dust before and after work. Use to blow off dust and cutting chips from machinery and equipment.

  Days to Ship:	1 Day(s)

• 

  Blow Gun, AG-4B

  ANESTIWATA

  [Applications]·Dust removal from machines and tools, blowing off cutting chips. [Connection Thread Diameter]G3/8 (PF3/8)

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Blow Gun, AG-41B

  ANESTIWATA

  A blow gun used to blow off dust and cutting chips from machinery and equipment.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Standard Type Duster Gun

  KINKI SEISAKUSYO

  A trigger type standard duster blow gun that can be used for a long time giving less strain to the hand.

  Days to Ship:	1 Day(s) or more

• 

  Specialist Nozzle APN

  KINKI SEISAKUSYO

  The 16 auxiliary holes taken in air and double the injection output from the 16 direct holes.

  Days to Ship:	16 Day(s) or more

• 

  Dedicated Nozzle GMN

  KINKI SEISAKUSYO

  The high-speed air jet from the opening on the circumference delivers a powerful impact.

  Days to Ship:	16 Day(s) or more

• 

  High Power Ultra-Quiet, Power Duster Gun 601AXE

  KINKI SEISAKUSYO

  Quiet, features a large flow rate, and includes a flexible plug.

  • STOCK

  Days to Ship:	16 Day(s) or more

• 

  Soft Air Blow Gun

  KINKI SEISAKUSYO

  Explosion-proof with low levels of spatter and vibration.

  Days to Ship:	16 Day(s) or more

• 

  Screw Air Hose, Air Duster Gun Set

  KINKI SEISAKUSYO

  The gun and hose are a set that can be used as is.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Hyper Blow Gun

  KINKI SEISAKUSYO

  It is an energy-saving type that blows off much dust quietly. [Features]quiet / flow rate control

  Days to Ship:	16 Day(s) or more

• 

  Air Duster JOPLASTAR Ⅱ EJ Series

  JOPLAX

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Stainless Nozzle for Air Duster

  TRUSCO NAKAYAMA

  Features
  Stands up to rust and can be used as a measure against pollutants thanks to the stainless steel structure.
  • Stronger than conventional nozzles with low possibility of friction or bending in the nozzle tip.
  • SUS304 Stainless steel nozzle.

  Days to Ship:	12 Day(s)

• 

  Long Nozzle with Handle for Air Duster

  TRUSCO NAKAYAMA

  Features
  · This long nozzle includes a grip that fits comfortably in the hand, making it easy to operate.
  · The inclusion of a handle makes it possible to reliably perform air blowing of distant areas.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Ultra-Lightweight Magnesium Nozzle for Air Duster

  TRUSCO NAKAYAMA

  Features
  · Weight is 1/3 that of conventional products, reducing air blowing workload.
  ·, The center of gravity is near the user, making it easier to hold and manipulate the nozzle.
  · Aluminum and magnesium alloy construction provides a 70% reduction in weight compared to conventional products.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Air-amplifying Nozzle for Air Duster

  TRUSCO NAKAYAMA

  Features
  • Manage work locations by nozzle color in plant or factory.
  Sucks air from the atmosphere; obtains approximately 4 times as much air amount.
  Stands up to rust due to the anodized aluminum finish.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Mag Skimmer Duster Gun

  WTB

  [Features]
  • The nozzle can be inserted into small places and blind holes; enables workers to work efficiently while holding down rebounding of chips or cutting fluid.
  
  [Application]
  • For dusty work at general manufacturing plants and food factories.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Mag Twin Duster Gun (Built-in Air Flow Adjustment)

  WTB

  [Features]
  • Double nozzle allows for efficient air blow.
  
  [Application]
  • For dusty work at general manufacturing plants and food factories.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Black Plug Duster Gun (Built-in Air Flow Regulation)

  WTB

  [Features]
  • Produces strong air for blowing away metal chips.
  • Replaceable nozzle.
  
  [Application]
  • For dusty work at general manufacturing plants and food factories.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Coiled Air Duster Gun Set

  WTB

  [Features]
  • Universal rotation of the metal fittings at both ends of the hose.
  • This is fitting type is easy to remove; improves work efficiency.
  
  [Application]
  • For dusty work at general manufacturing plants and food factories.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Pulse Blow Air Gun PAG Series

  KOGANEI

  Compressed air isn't free.
  [Features]
  Reduces compressed air usage by 50%.
  Improves dust removal efficiency.
  World's first. Built-in pulse air generation unit that doesn't require electricity.
  Includes trimmer, and can be adjusted using a pulse frequency adjustment screwdriver.
  Helps reduce use of factory air.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

Loading...