(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Website MISUMI akan di-upgrade untuk pengalaman pemesanan yang lebih baik. Mohon diperhatikan, kantor MISUMI akan tutup pada 26 September & website MISUMI menjalani maintenance mulai 25 September (17.30) – 28 September (08.30).
MISUMI website will be upgraded for a better ordering experience. Please note that the MISUMI office will be closed on 26 September, and the MISUMI website will undergo maintenance from 25 September (17:30) until 28 September (08:30).

Work Clamp Mechanism

Specifications and Features

Purpose/Function: Transport/Movement Positioning/Clamp Drive/Actuation

Space-saving mechanism that clamps and unclamps the workpiece by pressing the cam follower from the horizontal side.
Use a plate spring to clamp the workpiece and a link mechanism to insert and remove the support block on the turntable.
Unclamp by applying the cam follower mounted on the turntable.
Float using a cam follower in the unclamp mechanism.

※ This example is for design reference only. Equipment components may differ from the actual shape.

No.	Component	Economy Type Number	Specification	Quantity	Unit Price
①	Cam Follower	C-CFUA3-10	Screw part nominal (M)(mm): M3×0.5 Material: Carbon steel Fastening method: With hexagonal hole in head Basic load rating Cr(dynamic)(kN): 0.94 Allowable rotational speed (rpm): 26320	4	IDR 66,260/Piece
②	Oilless Bushing	C-MUBZ6-10	Inner diameter d(φ): 6 Total length L(mm): 10 Material: Brass Operating temperature range (°C): -40 to 150	2	IDR 26,188/Piece
③	Rod End Bearing	E-GYN6	Main body material: Steel Connection screw M: M6×1.0 Connection screw direction: Female thread	1	IDR 25,629/Piece