(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Website MISUMI akan di-upgrade untuk pengalaman pemesanan yang lebih baik. Mohon diperhatikan, kantor MISUMI akan tutup pada 26 September & website MISUMI menjalani maintenance mulai 25 September (17.30) – 28 September (08.30).
MISUMI website will be upgraded for a better ordering experience. Please note that the MISUMI office will be closed on 26 September, and the MISUMI website will undergo maintenance from 25 September (17:30) until 28 September (08:30).

Swing Clamp

Specifications and Features

Purpose/Function: Positioning/Clamp Drive/Actuation Processing

Rotate to clamp the workpiece.
Rotate the workpiece, clean dust from its surface, place it on the turntable, then rotate and lower the arm to clamp the workpiece.
Ensure the clamp arm swivels 45° to avoid interference when setting the workpiece.

※ This example is for design reference only. Equipment components may differ from the actual shape.

No.	Component	Economy Type Number	Specification	Quantity	Unit Price
①	Deep Groove Ball Bearing	C-E6206ZZ	Precision (JIS): Grade 0 Shield material/shape: Double-sealed type Inner/outer ring Material: Steel Basic dynamic load rating (N): 13650 Allowable rotational speed (RPM): 8000	2	IDR 36,485/Piece
②	Rod End Bearing	E-GYN10A	Main body material: Steel Connection screw M: M10×1.25 Connection screw direction: Right-hand thread	1	IDR 37,379/Piece
③	Cam Follower	C-CFUA6-16	Screw part nominal (M)(mm): M6×1.0 Material: Carbon steel Fastening method: With hexagonal hole in head Basic load rating Cr(dynamic)(kN): 3.3 Allowable rotational speed (rpm): 14000	2	IDR 78,875/Piece