(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Website MISUMI akan di-upgrade untuk pengalaman pemesanan yang lebih baik. Mohon diperhatikan, kantor MISUMI akan tutup pada 26 September & website MISUMI menjalani maintenance mulai 25 September (17.30) – 28 September (08.30).
MISUMI website will be upgraded for a better ordering experience. Please note that the MISUMI office will be closed on 26 September, and the MISUMI website will undergo maintenance from 25 September (17:30) until 28 September (08:30).

Tape Winding Jig

Specifications and Features

Purpose/Function: Transport/Movement Positioning/Clamp Setup

A device for winding the release paper while separating the tape portion and release paper portion of double-sided tape.
The tape body is wound around the lower pulley, and the release paper is wound around the upper pulley by pulling the tape.
The lower and upper pulleys are connected by a circular belt, and the difference in rotation is absorbed by the 'slip part' of the belt.
A manual mechanism where the pulley on the main body rotates by pulling the tape of the double-sided tape, and the pulley on the release paper side rotates through a round belt.

※ This example is for design reference only. Equipment components may differ from the actual shape.

No.	Component	Economy Type Number	Specification	Quantity	Unit Price
①	Deep Groove Ball Bearing	C-SE6900ZZ	Precision (JIS): Grade 0 Shield material/shape: Double-sealed type Inner/outer ring material: Stainless steel Basic dynamic load rating (N): 1360 Allowable rotational speed (RPM): 8000	1	IDR 17,124 /Piece