Safety Valves, Control Valves（Max. Applicable Pressure：0.11 to 1）

• 

  Pressure Reducing Valves (Steam), GD-6N Series

  YOSHITAKE

  Small, and lightweight, with constant secondary pressure accuracy even at small capacities. · The valve body and valve seat have superior durability thanks to the use of stainless steel.
  
  [Features]
  Constant secondary pressure accuracy does not change even at small capacities.
  · Compact and lightweight.
  · The valve body and valve seat have superior durability thanks to the use of stainless steel.
  · A screen (60 mesh) is built in to protect the valve body and seat from foreign material, pipe scales, and pipe chips.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  RP-6 Type Pressure Reducing Valve (for Steam) Benten

  VENN

  Pilot operated general-purpose products (high-capacity) such as construction equipment, factory equipment, etc.
  
  [Features]
  · The VENN-TEN is a pilot-operated pressure reducing valve used in main pipes and large flow-rate lines of construction equipment, industrial steam circuits, various production equipment, system industries, etc.
  ・­ This pressure-reducing valve is designed with operability as the number 1 priority in this design. It has stable performance under various conditions, and it is easy to install and use because it is small and light.
  · The adoption of the piston guide structure and special seal ring make control stable.
  · Can be used for a wide range of pressures and flow rates.
  ▪ As for RP-6 type, it is easy to adjust the pressure by manual handle operation with automatic lock mechanism (nominal diameter 15 to 80).
  · Compact design.

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves for Hot and Cold Water / Oil/Air, GD-6 Series

  YOSHITAKE

  Small, and lightweight, with constant secondary pressure accuracy even at small capacities.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve (For Steam / Low Pressure) GP-1000 Series

  YOSHITAKE

  [Features]
  ▪ SHASE-S106 conforms to standards of pressure reducing valve (Air Conditioning and Health Engineering Society).
  · The spherical shape of the main valve has excellent sealing properties to reduce valve seat leakage significantly (corresponding to the ANSI class IV) .
  · Compared with conventional pressure reducing valves, workability and durability are significantly enhanced.

  Days to Ship:	16 Day(s) or more

• 

  FM Valve Type 1

  FMVALVE

  A valve that can be used in combination with electromagnetic valves and mechanical control valves.
  
  [Features]
  · This valve can be electrically controlled by combined use with electromagnetic valves. Therefore, it enables simple timed water rationing, and varying of supply start-stop intervals. In addition, it facilitates construction of effective water supply systems by combined use with sensors, etc., to match the usage conditions.
  · This valve has simple structure. Therefore, it is easy to install and maintain.
  · This valve has no flow adjustment mechanism. Therefore, the flow rate cannot be adjusted.

  Days to Ship:	16 Day(s) or more

• 

  Safety Valve, Relief Valve AL-140 Series

  YOSHITAKE

  [Features]
  ・ It is made entirely of stainless steel, SCS14A (equivalent to SUS316) with excellent corrosion resistance is used for the main part
  ・ The sealed structure prevents fluid from leaking to the outside

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150T Series

  YOSHITAKE

  [Features]
  · Soft seats are utilized in the main parts for a superior valve seat airtight performance. Optimal for applications in which valve seat leaks are unacceptable.
  · The main parts: valve body, seat. and adjustment springs are made from stainless steel. Anti-corrosive SCS14A is used for the main parts.
  · The sealed construction prevents liquid from leaking outside.

  Days to Ship:	12 Day(s) or more

• 

  Safety Valve, Relief Valve AL-150 Series

  YOSHITAKE

  [Features]
  ・ It is a versatile type that supports fluids such as steam, air, water, and oil
  ・ The pressure division was subdivided, and ultra-precise finishing by advanced technology was realized to pursue the best performance
  ・ Main parts (valve body, valve seat) and adjustment spring are made of stainless steel, and SCS14A (equivalent to SUS316) with excellent corrosion resistance is used for main parts
  ・ The sealed structure prevents fluid from leaking to the outside

  Days to Ship:	11 Day(s) or more

• 

  Pressure Reducing Valve (For Cold and Hot Water) GD-24GS/GD-24GS-N Series

  YOSHITAKE

  A hanging metal type. A pressure reducing valve without sliding parts. Requires maintenance of consumable parts only.

  Days to Ship:	12 Day(s) or more

• 

  Air Vent Valve, TA-3/TA-6 Series

  YOSHITAKE

  Operates at a wide range of pressures, allowing use from low to high pressures. The valve seat uses a synthetic rubber disk, preventing leakage from the valve, but as a precautionary measure a screw has been added to mount the copper tube fitting onto the top part of the valve seat.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  FM Valve Type 3L

  FMVALVE

  [Features]
  ·The auxiliary valve (ball tap) piping can be connected directly to the main unit, so repairs can be performed without removing the auxiliary valve piping.
  ·When used in conjunction with a solenoid valve, it can be electrically controlled, so it is easy to change the timed water supply, water supply stop, and water supply start intervals.
  ·A unique buffer mechanism prevents water hammer.
  ·Equipped with a flow rate adjustment mechanism, it is possible to adjust the amount of water flow.
  ·If the pump for the water tank is a pressurized water supply system, use an electrical control system.

  Days to Ship:	16 Day(s) or more

• 

  Air Vent Valve, TA-16 CVS Series

  YOSHITAKE

  [Features]
  ・ All materials other than valve discs, gaskets, check valves, check valve fitting are made of stainless steel
  ・ Wide operating pressure (0.01 to 1.0 MPa) gives stable displacement
  ・ Compact size allows installation in a small space
  ・ Excellent sealing performance because synthetic rubber is used for the valve disc
  ・ TA-16CVS makes it easy to connect any exhaust pipe by installing optional pipe connection parts
  ・ Since it has a check valve, it does not suck air even when the inlet side is under negative pressure
  [Applications]
  ・ building equipment, factory equipment, housing complex

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  RD-14 Model Series - Pressure Reducing Valve (for Cold Water/Warm Water/Air/Oil)

  VENN

  Direct acting pressure reducing valve for air, liquids, and water has a low pressure fluctuating range and can be used at low as well as high flow rates.
  
  [Features]
  · At the construction facilities, the product can be used to control the pressure of water supplied from elevated water tanks in mid-rise and high-rise buildings, or in water supply directly connected to pumps instead of elevated water tanks, as well as in boiler water supply. Industrial use of the product includes pressure control for fuel oil, lubricating oil, and air.
  · Has a pressure balance structure, so changes to set pressures are minimal.
  · Maintenance is easy as the upper side can be taken apart unidirectionally allowing for internal inspection.
  · RD-14CN models come with nylon coating to protect from red water.

  Days to Ship:	12 Day(s) or more

• 

  LP-8AN Level-Regulating Valve (for Water, Angled)

  VENN

  [Features]
  · Angle level-regulating valve which prevents red water by using bronze for the main body. The general flow rate adjustment mechanism makes it possible to adjust the water expulsion volume using an adjustment screw and the valve closing time using a needle valve.
  ·When used in cold weather, residual water is minimized during drainage, and water is supplied steadily during rewatering.
  · The body is made of bronze, so it does not rust.
  · Two model series, one general-purpose with an adjustment mechanism and one for cold climates, are offered, so the user can choose a model according to the target application.
  · Antifreezing FV jacket is provided (except for the LP-8ARN model).

  Days to Ship:	12 Day(s) or more

• 

  RP-6A, Pressure-Reducing Valve (for Air/Gas), Benten

  VENN

  Pilot style general-purpose products (high-capacity) for factory facilities and by various types of equipment
  
  [Features]
  · A pilot-operated pressure reducing valve for air and gases which serves as a supporting model to the BENTEN RP-6.
  · The adoption of the piston guide structure makes control stable.
  · Can be used for a wide range of pressures and flow rates.
  · Manual handle control with auto locking mechanism (nominal diameter 15 to 80) makes pressure adjustment easy.
  · Compact design.

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve for Steam, Gas and Liquid, RD-3H Series

  VENN

  [Features]
  · Pilot type direct-acting, pressure-reducing valve that is used in non-controllable, small flow-rate locations. It has good pressure-control with excellent wide pressure range adjustment characteristics. The main parts are made from SUS (for steam).
  · Note: These valves differ for use with stream, air, vapor, and liquid.

  Days to Ship:	12 Day(s) or more

• 

  Bimetallic Disc Temperature Control Trap TB7N Type

  MIYAWAKI

  [Features]
  ・ Adopts SCCV mechanism and QC mechanism
  ・ The SCCV (self-controlled seated valve) mechanism has an excellent sealing performance because the valve is free in the holder and is softly drawn to the center axis of the valve seat when the valve is closed
  ・ Achieve faster start-up
  ・ Quickly discharges low-temperature condensate and air at the beginning of ventilation
  ・ Also functions as an air vent
  [Applications]
  ・ Steam transport pipe, trace line, etc.

  Days to Ship:	22 Day(s) or more

• 

  Safety Relief Valve AL-300T/AL-301 T Series

  YOSHITAKE

  [Features]
  ・ Fluoropolymer disc is used for the valve, so it has excellent seat airtightness
  ・ The main part (valve body / valve seat) of AL-301T is stainless steel, which has excellent corrosion resistance and durability

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-31/AL-31H Series

  YOSHITAKE

  [Features]
  ・ As it is made of entirely stainless steel, it has excellent corrosion resistance and durability particularly
  ・ AL-31H can handle set pressure up to MAX 2.0 MPa

  Days to Ship:	12 Day(s) or more

• 

  VD-1H Type Vacuum Adjustment Valve

  VENN

  [Features]
  ▪ It prevents the suction of the air in a valve when it opens due to the decrease in set pressure and it also prevents the creation of vacuums in pipes and equipment.
  ▪ Using a silencer when the vapor pipe is attached prevents suction of water into the pipe when vapor stops generating.

  Days to Ship:	22 Day(s) or more

• 

  AF-4 Series Air Vent Valve

  VENN

  The equipment is used in building facilities and factory facilities, etc. It is an air vent valve for fluids. It automatically discharges the air that accumulates in the pipes and the air inside an airtight tank and makes the fluid flow smoothly.
  
  [Features]
  ▪ Due to the improved airtightness, it has adopted the swing valve body.
  ▪ The amount of air discharged from the equipment is comparatively large.
  ▪ It has a simple structure that allows easy handling.
  · AF-4CN is a rust-resistant nylon-coated product.

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150T-N Series

  YOSHITAKE

  With soft sheeting used in main parts, this valve is optimal for applications that do not permit leakage from the valve seat. The valve/valve seat and adjustment spring are made of stainless steel, with anti-corrosive SCS14A being used in the main section.

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150TR Series

  YOSHITAKE

  A handle-operated valve for changing the pressure easily. Usable as a relief valve.
  
  [Features]
  · The AL-150 is a handle-operated valve for changing the pressure easily. Therefore, this valve can be used as a relief valve.
  · Soft seats are utilized in the main parts for a superior valve seat airtight performance.
  · Optimal for applications in which valve seat leaks are unacceptable.
  · The main parts (valve body and seat) and adjustment springs are manufactured from SCS14 stainless steel (SUS316 EQUIV) with excellent anti-corrosive properties.
  · The sealed construction prevents fluid from leaking outside.

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-4T Series

  YOSHITAKE

  [Features]
  · Mainly used as a safety relief valve downstream of a pressure reducing valve, safety valve for various pressure vessels and instrumentation equipment, and relief valve for pumps.
  · Fluororesin disks are used in AL-4T valve parts for superior valve seat sealing.

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves (Hot and Cold Water), GD-27S/GD-27S-NE Series

  YOSHITAKE

  Stainless steel used for wetted parts, preventing rust. Use of pressure-balanced valve structure means that secondary side pressure is maintained at a certain level without affecting primary side pressure.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve for Door-to-Door Water Supply for Condominiums, for Use in Residential Complexes, GD-25GJ Series

  YOSHITAKE

  [Features]
  ・ It is a product that realizes low noise water supply as a pressure reducing valve for house-to-house water supply for housing complexes, etc.
  ・ The secondary pressure can be maintained extremely stable against pressure fluctuations on the water supply side, and a strainer is built in, and it is designed to be compact and lightweight, so piping can be handled easily
  ・ Since the noise of the pressure reducing valve itself has been eliminated, it is relieved to supply water even at midnight
  ・ The water supply pressure has already been adjusted to the standard set pressure, so there is no need for on-site pressure regulation
  ・ Since the valve structure uses a pressure balance structure, the secondary pressure is always kept constant without being affected by the primary pressure
  ・ Since it has a built-in strainer, it collects dust, sand, etc., if they are mixed in, and prevents it from getting caught in the valve or flowing out to the secondary side
  ・ The strainer cap can be removed without the use of tools. In addition, since the strainer and strainer cap are integrated, there is no strainer left in the valve box, making maintenance easy
  ・ The closed structure prevents fluid from flowing out even if the diaphragm is damaged
  ・ Since it has a pressure gauge fitting, the pressure gauge can be installed while water is flowing and the set pressure can be easily confirmed

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  RP-6P Type Pressure-Reducing Valve (for Steam), Benten

  VENN

  Pilot-operated general-purpose products (high-capacity) for construction equipment, factory equipment, etc.
  
  [Features]
  - The VENN-TEN is a pilot-operated pressure reducing valve used in main pipes and large flow-rate lines within construction equipment, industrial steam circuits, production equipment, system industries, etc.
  ­ Designed with operation as its highest priority, it has stable performance under many conditions, and its small size and light weight makes it easy to install and use.
  - Piston guide structure and special seal ring for stable control.
  - The RP-6 type is widely used in pressure range/flow rate applications. Its auto locking mechanism (nominal diameter from 15 to 80) makes pressure adjustment easy with manual handle control.
  - Compact design.

  Days to Ship:	12 Day(s) or more

• 

  RP-6BD Trap, Built-in Pressure Reducing Valve (for Vapor), VENN-TEN

  VENN

  Pilot operated general-purpose products (high-capacity) such as construction equipment, factory equipment, etc.
  
  [Features]
  · Pilot-operated pressure reducing valve with built-in steam trap on the inside of the pilot-operated pressure reduction valve; a sister model of Benten RP-6 type.
  · Optimal as a pressure reducing valve positioned in locations where drainage water accumulates easily such as down pipes, and locations at which flow-out of drainage water beyond the pressure reducing valve needs to be prevented.
  · The position of the drain discharge holes can be changed at 90 degree intervals, enabling piping according to installation location.
  · Adoption of piston guide structure and special seal ring makes control stable.
  · Can be used for a wide range of pressures and flow rates.
  · Manual handle control with auto locking mechanism makes pressure adjustment easy.
  · Compact design.

  Days to Ship:	12 Day(s) or more

• 

  LP-8HN Level-Regulating Valve (for Water, for General Use with Adjustment Mechanisms)

  VENN

  [Features]
  · Standard constant water level valve with adjusting mechanism.
  · In order to prevent rust, threading can be bronze and embedded in the pipe end core.
  · A flow-rate adjustment mechanism and a valve closing time adjustment needle are provided.
  · Solution for rusty water: Screw-in = Bronze body + Pipe end core assembly is possible.
  · Because a bypass flow path is used for the passage to the pilot piping, intermittent water supply effects due to surges are eliminated, providing a silent and steady water supply.
  · Antifreeze FV jacket is provided.

  Days to Ship:	12 Day(s) or more

• 

  Relief Valve, AL-250 Series

  YOSHITAKE

  [Features]
  ・ Since it is entirely made of stainless steel, it has excellent corrosion resistance and durability
  ・ By adopting a dashpot structure, it has a great effect on lines with large pulsations and pressure fluctuations. Chattering and hunting are reduced
  ・ It has stable operation against back pressure changes during continuous blowing

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-140T Series

  YOSHITAKE

  [Features]
  ・ Since it is entirely made of stainless steel, it has excellent corrosion resistance and durability
  ・ A soft seat is used for the main part, and it has excellent airtightness in the valve seat
  ・ It is ideal for applications where valve seat leakage cannot be tolerated
  ・ The sealed structure prevents fluid from leaking to the outside

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves (Steam), GP-1002/GP-1002S Series

  YOSHITAKE

  [Features]
  · Conforms to SHASE-S106 pressure reducing valve (The Society of Heating, Air Conditioning and Sanitary Engineers of Japan) standards.
  · The spherical shape of the main valve provides excellent sealing properties to significantly reduce valve seat leakage (corresponding to the ANSI class IV) .
  · When compared with conventional pressure reducing valves, workability and durability are significantly enhanced.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves for Hot and Cold Water, GD-26-NE Series

  YOSHITAKE

  Corrosion-resistant materials are used in the liquid-contacting parts. Superior chlorine resistance and reliability for running cold and hot water. The valve utilizes pressure-balanced structure. Therefore, secondary side pressure is maintained at a fixed level without affecting the primary side pressure.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves (Hot and Cold water), GD-27-NE Series

  YOSHITAKE

  [Features]
  Corrosion-resistant materials are used for liquid-exposed parts, providing superior chlorine resistance against tap or hot water while minimizing rust.
  · A pressure-balancing valve structure ensures that pressure on the secondary side is kept constant without being affected by pressure on primary side.
  · The product includes a sealed structure so there is no external outflow even if the diaphragm is damaged.
  · Because internal inspection can be performed by disassembling from one direction on the upper side, maintenance and inspection are easy.
  · Pipe mounting direction is unrestricted: horizontal or vertical (however, 125 A and higher can only be mounted horizontally).

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  RD-44N Pressure-Reducing Valve for Door-to-Door Water Supply (for Cold/Hot Water), Benkei

  VENN

  Direct acting type general purpose product (low-noise type and pipe-end core support) suitable for housing complexes, hotels, and offices. RD-44N type valves are equipped with only the pressure reducing function, which is fundamental for the water supply pressure composite valve series, and enables increase in construction and test efficiency.
  
  [Features]
  · Water supply pressure reducing valve per room unit results in: 1) Reduces flow noise. 2) Installation of valve in each room unit eliminates water supply variation due to level differences. 3) No water splashes due to application of appropriate pressure. Reduces water hammering. 4) During maintenance, impact of water outage does not affect other areas. 5. Stable mixing temperature resulting in improved habitability.
  · Uses chlorine water-resistant EPDM.
  · Sanitary design avoids pooling of liquids.
  · Works reliably from low differential pressures to high differential pressure.
  · Safe and secure construction is made possible due to intact pressure-reducing valves.
  · You can conduct a hydraulic test even after construction while the pressure reducing valve is installed.
  · Easy, simple new test gag method.

  Days to Ship:	12 Day(s) or more

• 

  RD-25SN, 50SN Series Pressure-Reducing Valve for Water Service

  VENN

  A pressure reducing valve for supplying water to small boilers and electric water heaters. Can be freely mounted horizontally or vertically.
  
  [Features]
  - Chlorine water-resistant EPDM for improved durability (RD-50SN series).
  - Low-noise type (RD-50SN series).
  - Mounting position can be changed to any orientation (except with strainer cap upwards).

  Days to Ship:	12 Day(s) or more

• 

  SL-35N/35HN Type, Relief Valve for Hot Water Equipment

  VENN

  Diaphragm type relief valve for small hot water boilers and electric water heaters. Used as a relief valve for pressure caused by thermal expansion and on the secondary side of pressure reducing valve.

  Days to Ship:	13 Day(s) or more

• 

  MD-14 Type Series, Primary Pressure Regulating Valve (for Liquid/Air)

  VENN

  Pump relief, pressure tanks, piping etc.
  
  [Features]
  · Used as a pump relief valve.
  • Structure that takes Hunting vibration, etc. into account and provides stable operation.
  • Can be used as a relief valve for pressure tanks, piping etc.
  • Uses a piston type balance structure so changes in outlet pressure due to backpressure fluctuations are small.
  • Unidirectional disassembly the top facilitates internal inspection, simplifying maintenance.
  • MD-14CN features a rust-resistant nylon-coating.

  Days to Ship:	12 Day(s) or more

• 

  LP-8RN, Level-Regulating Valve (for Water, for Cold Areas)

  VENN

  By using a bypass flow path for the path to pilot piping, intermittent water supply effects due to surges are eliminated, providing a silent and steady water supply.
  
  [Features]
  · Constant water level valve for cold climates equipped with a drainage mechanism and a flow rate adjustment mechanism.
  · To prevent rusty water, the screw model can incorporate a pipe end core built into a bronze body.
  · Level-regulating valve suitable for use in cold regions.
  · Includes water drain mechanism and flow rate adjustment mechanism.
  · Rusty water countermeasures: a bypass flow path is used for the passage to pilot piping where the screw type can = body made of bronze + built-in pipe end core, enabling a quiet and steady water supply with no ball tap intermittent water supply effects due to surges

  Days to Ship:	12 Day(s) or more

• 

  TD-2 Type Series, Temperature Control Valve

  VENN

  Heating, cooling, and low temperature models are available.
  
  [Features]
  · General purpose flange type temperature adjustment valve, available for heating applications such as hot water tanks, heat exchangers, and heavy oil heaters, for cooling applications using water or a refrigerant, and low temperature applications where the set temperature is below the ambient temperature or where the set temperature is 40°C or below.

  Days to Ship:	12 Day(s) or more

• 

  AF-6N Air Vent Valve

  VENN

  [Features]
  · Small air vent valve to be used in a pipe, hot water boiler, fan coil, small or medium pressure tank, solar system, or others.
  · Operations are stable due to the BBC (bubble dispersion) method, so water discharge does not occur.
  · The air exhaust is tube-shaped.
  · Compact and capable of up to 1.0MPa.
  · Equipped with manual shut-down mechanism.

  Days to Ship:	16 Day(s) or more

• 

  FM Valve Type S-3F

  FMVALVE

  [Features]
  ·Equipped with a flow rate adjustment mechanism, the amount of water discharged can be adjusted.
  ·The strainer can be removed while the body is attached to the pipe.
  ·Since it can be controlled by electricity when used in combination with a solenoid valve, it is easy to change the interval between timed water supply, water supply stop, and water supply start.
  ·For 65 mm or more, the plug can be removed and the intake valve can be installed
  ·If the pump for the water tank is a pressurized water supply system, use an electric control system.

  Days to Ship:	15 Day(s) or more

• 

  Bimetallic Disc Temperature Control Trap TB9N Type

  MIYAWAKI

  [Features]
  ・ SCCV (Self Closing and Centering Valve) mechanism (): The valve is spherical and is not fixed to the shaft, but is designed to be held with some play left, right, front and back. Since the design structure holds the valve with play, even if the shaft slightly tilts due to the effect, etc., of condensed water when the valve is closed, the valve itself can flexibly close toward the center of the valve hole
  ・ QC (Quick-Close mechanism) mechanism (): When condensate flows from the inside of the trap body to the valve hole, the valve pushed down by the expansion force of the bimetal plate gradually closes the flow passage hole provided in the guide that shuts off the inside of the body and the valve hole. The valve gradually closes the flow passage hole, weakening the flow rate of the condensate passing through the valve opening, heats the bimetal more quickly, and promotes valve closing
  ・ Also available with convenient blow valve: There is also a type with a blow valve that removes scale and pipe dust that flows into and accumulates in the trap to the outside without disassembling the trap
  ・ If you would like to have a blow valve, please specify TB9BN-C or TB9BN-R
  ・ TB9BN-C can be used up to 0.98 MPa, and cock operation is easy
  ・ TB9BN-R can be used up to 1.6 MPa
  [Applications]
  ・ Ideal for steam tracing, steam transport pipes, tank heating, heating, etc.

  Days to Ship:	22 Day(s) or more

• 

  Nylon Coated Air Release Valve, TA-2C Series

  YOSHITAKE

  Equipped with a rapid exhaust mechanism to rapidly expel from air inside the pipe at the time of initial water throughput, thus easing water throughput.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Nylon Coated Air Release Valve, TA-3C Series

  YOSHITAKE

  Operates at a wide range of pressures, allowing use from low to high pressures. The valve seat uses a synthetic rubber disk, preventing leakage from the valve, but as a precautionary measure a screw has been added to mount the copper tube fitting onto the top part of the valve seat.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

Loading...