(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Website MISUMI akan di-upgrade untuk pengalaman pemesanan yang lebih baik. Mohon diperhatikan, kantor MISUMI akan tutup pada 26 September & website MISUMI menjalani maintenance mulai 25 September (17.30) – 28 September (08.30).
MISUMI website will be upgraded for a better ordering experience. Please note that the MISUMI office will be closed on 26 September, and the MISUMI website will undergo maintenance from 25 September (17:30) until 28 September (08:30).

Simple Clamp for L-Shaped Roller Head

Specifications and Features

Purpose/Function: Positioning/Clamp Setup

" Install rollers in an L-shape to clamp in two directions.
When clamping, the upper roller contacts the workpiece first, then the side roller contacts the workpiece's side.
The roller head's inclination is regulated to allow the roller on the workpiece surface to make initial contact before smooth clamping. "

※ This example is for design reference only. Equipment components may differ from the actual shape.

No.	Component	Economy Type Number	Specification	Quantity	Unit Price
①	Toggle Clamp	C-LD-201HB	Clamp bolt size: M5 Material: Steel (body), Steel + rubber pad (bolt) Clamping pressure (N): 400	2	IDR 41,180/Piece
②	Metal Washer	C-WSSA10-6-1	Outer diameter D(mm): 10 Inner diameter V(mm): 6 Material: Steel Surface treatment: Trivalent chromate bright finish	2	IDR 5,122/Piece
③	Cam Follower	C-CFFRUA5-13	Screw part nominal (M)(mm): M5×0.8 Material: Carbon steel Fastening method: With hexagonal hole in head Basic load rating Cr(dynamic)(kN): Allowable rotational speed (rpm): 1500	4	IDR 268,110/Piece
④	Hinge Pin	C-HCDG6-15	Shaft diameter D(mm): 6 L dimension (mm): 15 Material: Steel Surface treatment: Black oxide coating	2	IDR 18,937/Piece