(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Double Stepped Shoulder Punches Quill type

Double Stepped Shoulder Punches Quill type

Click this image to zoom it.

Move the mouse over the image to zoom

A punch with a guide section separate from the cutting edge. Please use this when the diameter of the cutting edge is small and it is difficult to secure the necessary cutting edge length for the guide.

  • FLANGE
  • SKH51
  • POWDER HSS

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
A-PHTWA1.6-[20,​25,​30,​35,​40,​50,​60]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
A-PHTWA1.6-LC[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
A-PHTWA1.6-LCT[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
A-PHTWA1.6-LMT[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
A-PHTWA2.0-[20,​25,​30,​35,​40,​50,​60]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
A-PHTWA2.0-LC[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
A-PHTWA2.0-LCT[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
A-PHTWA2.0-LMT[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
A-PHTWA2.5-[20,​25,​30,​35,​40,​50,​60]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
A-PHTWA2.5-LC[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
A-PHTWA2.5-LCT[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
A-PHTWA2.5-LMT[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
A-SHTWA1.6-[20,​25,​30,​35,​40,​50,​60]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
A-SHTWA1.6-LC[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
A-SHTWA1.6-LCT[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
A-SHTWA1.6-LMT[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
A-SHTWA2.0-[20,​25,​30,​35,​40,​50,​60]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
A-SHTWA2.0-LC[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
A-SHTWA2.0-LCT[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
A-SHTWA2.0-LMT[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
A-SHTWA2.5-[20,​25,​30,​35,​40,​50,​60]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
A-SHTWA2.5-LC[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
A-SHTWA2.5-LCT[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
A-SHTWA2.5-LMT[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
PHTWA1.6-[20,​25,​30,​35,​40,​50,​60]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
PHTWA1.6-LC[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
PHTWA1.6-LCT[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
PHTWA1.6-LMT[20-49.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
PHTWA2.0-[20,​25,​30,​35,​40,​50,​60]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
PHTWA2.0-LC[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
PHTWA2.0-LCT[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
PHTWA2.0-LMT[20-49.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
PHTWA2.5-[20,​25,​30,​35,​40,​50,​60]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
PHTWA2.5-LC[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
PHTWA2.5-LCT[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
PHTWA2.5-LMT[20-49.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
SHTWA1.6-[20,​25,​30,​35,​40,​50,​60]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
SHTWA1.6-LC[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
SHTWA1.6-LCT[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
SHTWA1.6-LMT[20-49.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
SHTWA2.0-[20,​25,​30,​35,​40,​50,​60]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
SHTWA2.0-LC[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
SHTWA2.0-LCT[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
SHTWA2.0-LMT[20-49.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
SHTWA2.5-[20,​25,​30,​35,​40,​50,​60]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
SHTWA2.5-LC[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
SHTWA2.5-LCT[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
SHTWA2.5-LMT[20-49.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSMaterial Shank diameter D tolerance D (Shank diameter)
(mm)
P (Tip dimension)
(mm)
L (L dimension)
(mm)
B (Tip length)
(mm)
F (Length from tip end to second step R)
(mm)
LC (Full length alteration)
(mm)
LCT (Head thickness tolerance change + Total length alteration)
(mm)
LMT (Head thickness tolerance change + Total length alteration)
(mm)
V (Second step tip diameter)
(mm)
1 Piece(s) 8 Day(s) 10Powdered high-speed steel+0.005/01.60.3 ~ 1.5620 ~ 601 ~ 102 ~ 20---0.31 ~ 1.59
1 Piece(s) 8 Day(s) 10Powdered high-speed steel+0.005/01.60.3 ~ 1.56-1 ~ 102 ~ 2020 ~ 59.9--0.31 ~ 1.59
1 Piece(s) 8 Day(s) 10Powdered high-speed steel+0.005/01.60.3 ~ 1.56-1 ~ 102 ~ 20-20 ~ 59.9-0.31 ~ 1.59
1 Piece(s) 8 Day(s) 10Powdered high-speed steel+0.005/01.60.3 ~ 1.56-1 ~ 102 ~ 20--20 ~ 59.90.31 ~ 1.59
1 Piece(s) 8 Day(s) 10Powdered high-speed steel+0.005/02.00.5 ~ 1.9620 ~ 601 ~ 102 ~ 20---0.51 ~ 1.99
1 Piece(s) 8 Day(s) 10Powdered high-speed steel+0.005/02.00.5 ~ 1.96-1 ~ 102 ~ 2020 ~ 59.9--0.51 ~ 1.99
1 Piece(s) 8 Day(s) 10Powdered high-speed steel+0.005/02.00.5 ~ 1.96-1 ~ 102 ~ 20-20 ~ 59.9-0.51 ~ 1.99
1 Piece(s) 8 Day(s) 10Powdered high-speed steel+0.005/02.00.5 ~ 1.96-1 ~ 102 ~ 20--20 ~ 59.90.51 ~ 1.99
1 Piece(s) 8 Day(s) 10Powdered high-speed steel+0.005/02.50.8 ~ 2.4620 ~ 601 ~ 102 ~ 35---0.51 ~ 2.99
1 Piece(s) 8 Day(s) 10Powdered high-speed steel+0.005/02.50.8 ~ 2.46-1 ~ 102 ~ 3520 ~ 59.9--0.51 ~ 2.99
1 Piece(s) 8 Day(s) 10Powdered high-speed steel+0.005/02.50.8 ~ 2.46-1 ~ 102 ~ 35-20 ~ 59.9-0.51 ~ 2.99
1 Piece(s) 8 Day(s) 10Powdered high-speed steel+0.005/02.50.8 ~ 2.46-1 ~ 102 ~ 35--20 ~ 59.90.51 ~ 2.99
1 Piece(s) 8 Day(s) 10SKH51 Equivalent+0.005/01.60.3 ~ 1.5620 ~ 601 ~ 102 ~ 20---0.31 ~ 1.59
1 Piece(s) 8 Day(s) 10SKH51 Equivalent+0.005/01.60.3 ~ 1.56-1 ~ 102 ~ 2020 ~ 59.9--0.31 ~ 1.59
1 Piece(s) 8 Day(s) 10SKH51 Equivalent+0.005/01.60.3 ~ 1.56-1 ~ 102 ~ 20-20 ~ 59.9-0.31 ~ 1.59
1 Piece(s) 8 Day(s) 10SKH51 Equivalent+0.005/01.60.3 ~ 1.56-1 ~ 102 ~ 20--20 ~ 59.90.31 ~ 1.59
1 Piece(s) 8 Day(s) 10SKH51 Equivalent+0.005/02.00.5 ~ 1.9620 ~ 601 ~ 102 ~ 20---0.51 ~ 1.99
1 Piece(s) 8 Day(s) 10SKH51 Equivalent+0.005/02.00.5 ~ 1.96-1 ~ 102 ~ 2020 ~ 59.9--0.51 ~ 1.99
1 Piece(s) 8 Day(s) 10SKH51 Equivalent+0.005/02.00.5 ~ 1.96-1 ~ 102 ~ 20-20 ~ 59.9-0.51 ~ 1.99
1 Piece(s) 8 Day(s) 10SKH51 Equivalent+0.005/02.00.5 ~ 1.96-1 ~ 102 ~ 20--20 ~ 59.90.51 ~ 1.99
1 Piece(s) 8 Day(s) 10SKH51 Equivalent+0.005/02.50.8 ~ 2.4620 ~ 601 ~ 102 ~ 35---0.51 ~ 2.99
1 Piece(s) 8 Day(s) 10SKH51 Equivalent+0.005/02.50.8 ~ 2.46-1 ~ 102 ~ 3520 ~ 59.9--0.51 ~ 2.99
1 Piece(s) 8 Day(s) 10SKH51 Equivalent+0.005/02.50.8 ~ 2.46-1 ~ 102 ~ 35-20 ~ 59.9-0.51 ~ 2.99
1 Piece(s) 8 Day(s) 10SKH51 Equivalent+0.005/02.50.8 ~ 2.46-1 ~ 102 ~ 35--20 ~ 59.90.51 ~ 2.99
1 Piece(s) 8 Day(s) 10Powdered high-speed steelm51.60.3 ~ 1.5620 ~ 601 ~ 102 ~ 20---0.31 ~ 1.59
1 Piece(s) 8 Day(s) 10Powdered high-speed steelm51.60.3 ~ 1.56-1 ~ 102 ~ 2020 ~ 59.9--0.31 ~ 1.59
1 Piece(s) 8 Day(s) 10Powdered high-speed steelm51.60.3 ~ 1.56-1 ~ 102 ~ 20-20 ~ 59.9-0.31 ~ 1.59
1 Piece(s) 8 Day(s) 10Powdered high-speed steelm51.60.3 ~ 1.56-1 ~ 102 ~ 20--20 ~ 49.90.31 ~ 1.59
1 Piece(s) 8 Day(s) 10Powdered high-speed steelm52.00.5 ~ 1.9620 ~ 601 ~ 102 ~ 20---0.51 ~ 1.99
1 Piece(s) 8 Day(s) 10Powdered high-speed steelm52.00.5 ~ 1.96-1 ~ 102 ~ 2020 ~ 59.9--0.51 ~ 1.99
1 Piece(s) 8 Day(s) 10Powdered high-speed steelm52.00.5 ~ 1.96-1 ~ 102 ~ 20-20 ~ 59.9-0.51 ~ 1.99
1 Piece(s) 8 Day(s) 10Powdered high-speed steelm52.00.5 ~ 1.96-1 ~ 102 ~ 20--20 ~ 49.90.51 ~ 1.99
1 Piece(s) 8 Day(s) 10Powdered high-speed steelm52.50.8 ~ 2.4620 ~ 601 ~ 102 ~ 35---0.51 ~ 2.99
1 Piece(s) 8 Day(s) 10Powdered high-speed steelm52.50.8 ~ 2.46-1 ~ 102 ~ 3520 ~ 59.9--0.51 ~ 2.99
1 Piece(s) 8 Day(s) 10Powdered high-speed steelm52.50.8 ~ 2.46-1 ~ 102 ~ 35-20 ~ 59.9-0.51 ~ 2.99
1 Piece(s) 8 Day(s) 10Powdered high-speed steelm52.50.8 ~ 2.46-1 ~ 102 ~ 35--20 ~ 49.90.51 ~ 2.99
1 Piece(s) 8 Day(s) 10SKH51 Equivalentm51.60.3 ~ 1.5620 ~ 601 ~ 102 ~ 20---0.31 ~ 1.59
1 Piece(s) 8 Day(s) 10SKH51 Equivalentm51.60.3 ~ 1.56-1 ~ 102 ~ 2020 ~ 59.9--0.31 ~ 1.59
1 Piece(s) 8 Day(s) 10SKH51 Equivalentm51.60.3 ~ 1.56-1 ~ 102 ~ 20-20 ~ 59.9-0.31 ~ 1.59
1 Piece(s) 8 Day(s) 10SKH51 Equivalentm51.60.3 ~ 1.56-1 ~ 102 ~ 20--20 ~ 49.90.31 ~ 1.59
1 Piece(s) 8 Day(s) 10SKH51 Equivalentm52.00.5 ~ 1.9620 ~ 601 ~ 102 ~ 20---0.51 ~ 1.99
1 Piece(s) 8 Day(s) 10SKH51 Equivalentm52.00.5 ~ 1.96-1 ~ 102 ~ 2020 ~ 59.9--0.51 ~ 1.99
1 Piece(s) 8 Day(s) 10SKH51 Equivalentm52.00.5 ~ 1.96-1 ~ 102 ~ 20-20 ~ 59.9-0.51 ~ 1.99
1 Piece(s) 8 Day(s) 10SKH51 Equivalentm52.00.5 ~ 1.96-1 ~ 102 ~ 20--20 ~ 49.90.51 ~ 1.99
1 Piece(s) 8 Day(s) 10SKH51 Equivalentm52.50.8 ~ 2.4620 ~ 601 ~ 102 ~ 35---0.51 ~ 2.99
1 Piece(s) 8 Day(s) 10SKH51 Equivalentm52.50.8 ~ 2.46-1 ~ 102 ~ 3520 ~ 59.9--0.51 ~ 2.99
1 Piece(s) 8 Day(s) 10SKH51 Equivalentm52.50.8 ~ 2.46-1 ~ 102 ~ 35-20 ~ 59.9-0.51 ~ 2.99
1 Piece(s) 8 Day(s) 10SKH51 Equivalentm52.50.8 ~ 2.46-1 ~ 102 ~ 35--20 ~ 49.90.51 ~ 2.99

Loading...

  1. 1
 

Basic Information

Heavy-load punches No Shank type Double-stepped Jector None
Tip shape A Surface treatment None Shank (mounting part) shape Standard
T (Head thickness/plate thickness)(mm) 3

Tech Support

Press
Tel:021-8990-5801 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)