(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 30/6/2024 sampai dengan 5:00 pada tanggal 1/7/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 30/6/2024 to 5:00 (WIB) 1/7/2024. We apologize for the inconvenience.
Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Flange Stopper Pilot Punches Normal, TiCN Coating, HW Coating, DLC Coating

MISUMI

This is a pilot punch designed to hold the punch with the brim and prevent it from falling out with a key plate, etc. The tip is coated with various types of TiCN and DLC coatings. HW/NW coating improves the durability of the coating by using WPC® treatment.

FLANGE
POWDER HSS
TiCN
HW
DLC

Part Number

Configured Part Number is shown.

Drawing
3D Preview
Part Numbers
Catalog

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
HW-PATHAL4-[42,52]-P[1-2/0.01]-A[10-30/5]-T[13,16,20,25]-B[2-6/1]
HW-PATHAL4-[42,52]-P[1-2/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-6/1]
HW-PATHAL4-LC[40.1-51.9/0.1]-P[1-2/0.01]-A[10-30/5]-T[13,16,20,25]-B[2-6/1]
HW-PATHAL4-LC[40.1-51.9/0.1]-P[1-2/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-6/1]
HW-PATHAL4-LCT[40-51.9/0.1]-P[1-2/0.01]-A[10-30/5]-T[13,16,20,25]-B[2-6/1]
HW-PATHAL4-LCT[40-51.9/0.1]-P[1-2/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-6/1]
HW-PATHAL5-[42,52]-P[1-3/0.01]-A[10-30/5]-T[13,16,20,25]-B[2-8/1]
HW-PATHAL5-[42,52]-P[1-3/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-8/1]
HW-PATHAL5-LC[40.1-51.9/0.1]-P[1-3/0.01]-A[10-30/5]-T[13,16,20,25]-B[2-8/1]
HW-PATHAL5-LC[40.1-51.9/0.1]-P[1-3/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-8/1]
HW-PATHAL5-LCT[40-51.9/0.1]-P[1-3/0.01]-A[10-30/5]-T[13,16,20,25]-B[2-8/1]
HW-PATHAL5-LCT[40-51.9/0.1]-P[1-3/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-8/1]
HW-PATHAL6-[42,52,62]-P[1.5-4/0.01]-A[10-30/5]-T[13,16,20,25]-B[2-13/1]
HW-PATHAL6-[42,52,62]-P[1.5-4/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-13/1]
HW-PATHAL6-LC[40.1-61.9/0.1]-P[1.5-4/0.01]-A[10-30/5]-T[13,16,20,25]-B[2-13/1]
HW-PATHAL6-LC[40.1-61.9/0.1]-P[1.5-4/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-13/1]
HW-PATHAL6-LCT[40-61.9/0.1]-P[1.5-4/0.01]-A[10-30/5]-T[13,16,20,25]-B[2-13/1]
HW-PATHAL6-LCT[40-61.9/0.1]-P[1.5-4/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-13/1]
HW-PATHAL8-[42,52,62]-P[2-6/0.01]-A[10-30/5]-T[13,16,20,25]-B[2-13/1]
HW-PATHAL8-[42,52,62]-P[2-6/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-13/1]
HW-PATHAL8-LC[40.1-61.9/0.1]-P[2-6/0.01]-A[10-30/5]-T[13,16,20,25]-B[2-13/1]
HW-PATHAL8-LC[40.1-61.9/0.1]-P[2-6/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-13/1]
HW-PATHAL8-LCT[40-61.9/0.1]-P[2-6/0.01]-A[10-30/5]-T[13,16,20,25]-B[2-13/1]
HW-PATHAL8-LCT[40-61.9/0.1]-P[2-6/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-13/1]
HW-PSTHAL4-[42,52]-P[1-2/0.01]-T[13,16,20,25]-B[2-6/1]
HW-PSTHAL4-[42,52]-P[1-2/0.01]-TC[13.1-24.9/0.1]-B[2-6/1]
HW-PSTHAL4-LC[40.1-51.9/0.1]-P[1-2/0.01]-T[13,16,20,25]-B[2-6/1]
HW-PSTHAL4-LC[40.1-51.9/0.1]-P[1-2/0.01]-TC[13.1-24.9/0.1]-B[2-6/1]
HW-PSTHAL4-LCT[40-51.9/0.1]-P[1-2/0.01]-T[13,16,20,25]-B[2-6/1]
HW-PSTHAL4-LCT[40-51.9/0.1]-P[1-2/0.01]-TC[13.1-24.9/0.1]-B[2-6/1]
HW-PSTHAL5-[42,52,62]-P[1-3/0.01]-T[13,16,20,25]-B[2-8/1]
HW-PSTHAL5-[42,52,62]-P[1-3/0.01]-TC[13.1-24.9/0.1]-B[2-8/1]
HW-PSTHAL5-LC[40.1-61.9/0.1]-P[1-3/0.01]-T[13,16,20,25]-B[2-8/1]
HW-PSTHAL5-LC[40.1-61.9/0.1]-P[1-3/0.01]-TC[13.1-24.9/0.1]-B[2-8/1]
HW-PSTHAL5-LCT[40-61.9/0.1]-P[1-3/0.01]-T[13,16,20,25]-B[2-8/1]
HW-PSTHAL5-LCT[40-61.9/0.1]-P[1-3/0.01]-TC[13.1-24.9/0.1]-B[2-8/1]
HW-PSTHAL6-[42,52,62,72]-P[1.5-4/0.01]-T[13,16,20,25]-B[2-13/1]
HW-PSTHAL6-[42,52,62,72]-P[1.5-4/0.01]-TC[13.1-24.9/0.1]-B[2-13/1]
HW-PSTHAL6-LC[40.1-71.9/0.1]-P[1.5-4/0.01]-T[13,16,20,25]-B[2-13/1]
HW-PSTHAL6-LC[40.1-71.9/0.1]-P[1.5-4/0.01]-TC[13.1-24.9/0.1]-B[2-13/1]
HW-PSTHAL6-LCT[40-71.9/0.1]-P[1.5-4/0.01]-T[13,16,20,25]-B[2-13/1]
HW-PSTHAL6-LCT[40-71.9/0.1]-P[1.5-4/0.01]-TC[13.1-24.9/0.1]-B[2-13/1]
HW-PSTHAL8-[42,52,62,72]-P[2-6/0.01]-T[13,16,20,25]-B[2-13/1]
HW-PSTHAL8-[42,52,62,72]-P[2-6/0.01]-TC[13.1-24.9/0.1]-B[2-13/1]
HW-PSTHAL8-LC[40.1-71.9/0.1]-P[2-6/0.01]-T[13,16,20,25]-B[2-13/1]
HW-PSTHAL8-LC[40.1-71.9/0.1]-P[2-6/0.01]-TC[13.1-24.9/0.1]-B[2-13/1]
HW-PSTHAL8-LCT[40-71.9/0.1]-P[2-6/0.01]-T[13,16,20,25]-B[2-13/1]
HW-PSTHAL8-LCT[40-71.9/0.1]-P[2-6/0.01]-TC[13.1-24.9/0.1]-B[2-13/1]
HW-PTPHAL4-[42,52]-P[1-2/0.01]-T[13,16,20,25]-B[2-6/1]
HW-PTPHAL4-[42,52]-P[1-2/0.01]-TC[13.1-24.9/0.1]-B[2-6/1]
HW-PTPHAL4-LC[40.1-51.9/0.1]-P[1-2/0.01]-T[13,16,20,25]-B[2-6/1]
HW-PTPHAL4-LC[40.1-51.9/0.1]-P[1-2/0.01]-TC[13.1-24.9/0.1]-B[2-6/1]
HW-PTPHAL4-LCT[40-51.9/0.1]-P[1-2/0.01]-T[13,16,20,25]-B[2-6/1]
HW-PTPHAL4-LCT[40-51.9/0.1]-P[1-2/0.01]-TC[13.1-24.9/0.1]-B[2-6/1]
HW-PTPHAL5-[42,52,62]-P[1-3/0.01]-T[13,16,20,25]-B[2-8/1]
HW-PTPHAL5-[42,52,62]-P[1-3/0.01]-TC[13.1-24.9/0.1]-B[2-8/1]
HW-PTPHAL5-LC[40.1-61.9/0.1]-P[1-3/0.01]-T[13,16,20,25]-B[2-8/1]
HW-PTPHAL5-LC[40.1-61.9/0.1]-P[1-3/0.01]-TC[13.1-24.9/0.1]-B[2-8/1]
HW-PTPHAL5-LCT[40-61.9/0.1]-P[1-3/0.01]-T[13,16,20,25]-B[2-8/1]
HW-PTPHAL5-LCT[40-61.9/0.1]-P[1-3/0.01]-TC[13.1-24.9/0.1]-B[2-8/1]

Minimum order quantity	Days to Ship	RoHS	Tip shape	Surface treatment	Shank diameter D tolerance	D (Shank diameter) (mm)	L (L dimension) (mm)	A (Taper angle) (°)	B (Tip length) (mm)	LC (Full length alteration) (mm)	LCT (Head thickness tolerance change + Total length alteration) (mm)	P (Tip dimension) (mm)	T (Head length) (mm)	TC (T dimension alteration) (mm)
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	4	42 ～ 52	10 ～ 30	2 ～ 6	-	-	1 ～ 2	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	4	42 ～ 52	10 ～ 30	2 ～ 6	-	-	1 ～ 2	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	4	-	10 ～ 30	2 ～ 6	40.1 ～ 51.9	-	1 ～ 2	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	4	-	10 ～ 30	2 ～ 6	40.1 ～ 51.9	-	1 ～ 2	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	4	-	10 ～ 30	2 ～ 6	-	40 ～ 51.9	1 ～ 2	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	4	-	10 ～ 30	2 ～ 6	-	40 ～ 51.9	1 ～ 2	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	5	42 ～ 52	10 ～ 30	2 ～ 8	-	-	1 ～ 3	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	5	42 ～ 52	10 ～ 30	2 ～ 8	-	-	1 ～ 3	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	5	-	10 ～ 30	2 ～ 8	40.1 ～ 51.9	-	1 ～ 3	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	5	-	10 ～ 30	2 ～ 8	40.1 ～ 51.9	-	1 ～ 3	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	5	-	10 ～ 30	2 ～ 8	-	40 ～ 51.9	1 ～ 3	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	5	-	10 ～ 30	2 ～ 8	-	40 ～ 51.9	1 ～ 3	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	6	42 ～ 62	10 ～ 30	2 ～ 13	-	-	1.5 ～ 4	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	6	42 ～ 62	10 ～ 30	2 ～ 13	-	-	1.5 ～ 4	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	6	-	10 ～ 30	2 ～ 13	40.1 ～ 61.9	-	1.5 ～ 4	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	6	-	10 ～ 30	2 ～ 13	40.1 ～ 61.9	-	1.5 ～ 4	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	6	-	10 ～ 30	2 ～ 13	-	40 ～ 61.9	1.5 ～ 4	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	6	-	10 ～ 30	2 ～ 13	-	40 ～ 61.9	1.5 ～ 4	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	8	42 ～ 62	10 ～ 30	2 ～ 13	-	-	2 ～ 6	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	8	42 ～ 62	10 ～ 30	2 ～ 13	-	-	2 ～ 6	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	8	-	10 ～ 30	2 ～ 13	40.1 ～ 61.9	-	2 ～ 6	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	8	-	10 ～ 30	2 ～ 13	40.1 ～ 61.9	-	2 ～ 6	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	8	-	10 ～ 30	2 ～ 13	-	40 ～ 61.9	2 ～ 6	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Sharp tip angle	HW coating	+0.005/0	8	-	10 ～ 30	2 ～ 13	-	40 ～ 61.9	2 ～ 6	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	4	42 ～ 52	-	2 ～ 6	-	-	1 ～ 2	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	4	42 ～ 52	-	2 ～ 6	-	-	1 ～ 2	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	4	-	-	2 ～ 6	40.1 ～ 51.9	-	1 ～ 2	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	4	-	-	2 ～ 6	40.1 ～ 51.9	-	1 ～ 2	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	4	-	-	2 ～ 6	-	40 ～ 51.9	1 ～ 2	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	4	-	-	2 ～ 6	-	40 ～ 51.9	1 ～ 2	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	5	42 ～ 62	-	2 ～ 8	-	-	1 ～ 3	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	5	42 ～ 62	-	2 ～ 8	-	-	1 ～ 3	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	5	-	-	2 ～ 8	40.1 ～ 61.9	-	1 ～ 3	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	5	-	-	2 ～ 8	40.1 ～ 61.9	-	1 ～ 3	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	5	-	-	2 ～ 8	-	40 ～ 61.9	1 ～ 3	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	5	-	-	2 ～ 8	-	40 ～ 61.9	1 ～ 3	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	6	42 ～ 72	-	2 ～ 13	-	-	1.5 ～ 4	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	6	42 ～ 72	-	2 ～ 13	-	-	1.5 ～ 4	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	6	-	-	2 ～ 13	40.1 ～ 71.9	-	1.5 ～ 4	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	6	-	-	2 ～ 13	40.1 ～ 71.9	-	1.5 ～ 4	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	6	-	-	2 ～ 13	-	40 ～ 71.9	1.5 ～ 4	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	6	-	-	2 ～ 13	-	40 ～ 71.9	1.5 ～ 4	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	8	42 ～ 72	-	2 ～ 13	-	-	2 ～ 6	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	8	42 ～ 72	-	2 ～ 13	-	-	2 ～ 6	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	8	-	-	2 ～ 13	40.1 ～ 71.9	-	2 ～ 6	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	8	-	-	2 ～ 13	40.1 ～ 71.9	-	2 ～ 6	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	8	-	-	2 ～ 13	-	40 ～ 71.9	2 ～ 6	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Tip R	HW coating	+0.005/0	8	-	-	2 ～ 13	-	40 ～ 71.9	2 ～ 6	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Tapered tip	HW coating	+0.005/0	4	42 ～ 52	-	2 ～ 6	-	-	1 ～ 2	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Tapered tip	HW coating	+0.005/0	4	42 ～ 52	-	2 ～ 6	-	-	1 ～ 2	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Tapered tip	HW coating	+0.005/0	4	-	-	2 ～ 6	40.1 ～ 51.9	-	1 ～ 2	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Tapered tip	HW coating	+0.005/0	4	-	-	2 ～ 6	40.1 ～ 51.9	-	1 ～ 2	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Tapered tip	HW coating	+0.005/0	4	-	-	2 ～ 6	-	40 ～ 51.9	1 ～ 2	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Tapered tip	HW coating	+0.005/0	4	-	-	2 ～ 6	-	40 ～ 51.9	1 ～ 2	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Tapered tip	HW coating	+0.005/0	5	42 ～ 62	-	2 ～ 8	-	-	1 ～ 3	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Tapered tip	HW coating	+0.005/0	5	42 ～ 62	-	2 ～ 8	-	-	1 ～ 3	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Tapered tip	HW coating	+0.005/0	5	-	-	2 ～ 8	40.1 ～ 61.9	-	1 ～ 3	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Tapered tip	HW coating	+0.005/0	5	-	-	2 ～ 8	40.1 ～ 61.9	-	1 ～ 3	-	13.1 ～ 24.9
1 Piece(s)	18 Day(s) or more	10	Tapered tip	HW coating	+0.005/0	5	-	-	2 ～ 8	-	40 ～ 61.9	1 ～ 3	13 ～ 25	-
1 Piece(s)	18 Day(s) or more	10	Tapered tip	HW coating	+0.005/0	5	-	-	2 ～ 8	-	40 ～ 61.9	1 ～ 3	-	13.1 ～ 24.9

Product TOP

Basic Information

Shank type	Standard	Material	Powdered high-speed steel	Mounting plate	Punch plate
Shank (mounting part) shape	Flange stopper

Configure

72 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Tip shape
- Tip R
- Tapered tip
- Sharp tip angle
Clear
Shank diameter D tolerance
- +0.005/0
Clear
D (Shank diameter)(mm)
- 4
- 5
- 6
- 8
Clear
L (L dimension)(mm)
42

52

62

72
Clear
A (Taper angle)(°)
[10-30/5° Unit(s)]
Clear
B (Tip length)(mm)
[2-13/1mm Unit(s)]
Clear
LC (Full length alteration)(mm)
[40.1-71.9/0.1mm Unit(s)]
Clear
LCT (Head thickness tolerance change + Total length alteration)(mm)
[40-71.9/0.1mm Unit(s)]
Clear
P (Tip dimension)(mm)
[1-6/0.01mm Unit(s)]
Clear
T (Head length)(mm)
13

16

20

25
Clear
TC (T dimension alteration)(mm)
[13.1-24.9/0.1mm Unit(s)]
Clear
type
- H-PATHAL
- H-PSTHAL
- H-PTPHAL
- HW-PATHAL
- HW-PSTHAL
- HW-PTPHAL
- N-PATHAL
- N-PSTHAL
- N-PTPHAL
- NW-PATHAL
- NW-PSTHAL
- NW-PTPHAL
- PATHAL
- PSTHAL
- PTPHAL
Clear
Surface treatment
- None
- TiCN
- HW coating
- DLC foundation WPC
- Without DLC foundation
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

15 Day(s) or Less

18 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

: Technical Inquiry

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Flange Stopper Pilot Punches Normal, TiCN Coating, HW Coating, DLC Coating

Part Number

Basic Information

Configure

Specification/Dimensions

Tip shape

Shank diameter D tolerance

D (Shank diameter)(mm)

L (L dimension)(mm)

A (Taper angle)(°)

B (Tip length)(mm)

LC (Full length alteration)(mm)

LCT (Head thickness tolerance change + Total length alteration)(mm)

P (Tip dimension)(mm)

T (Head length)(mm)

TC (T dimension alteration)(mm)

type

Surface treatment

CAD

Days to Ship

Specify Alterations

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Flange Stopper Pilot Punches Normal, TiCN Coating, HW Coating, DLC Coating

Part Number

Basic Information

Configure

Specification/Dimensions

Tip shape

Shank diameter D tolerance

D (Shank diameter)(mm)

L (L dimension)(mm)

A (Taper angle)(°)

B (Tip length)(mm)

LC (Full length alteration)(mm)

LCT (Head thickness tolerance change + Total length alteration)(mm)

P (Tip dimension)(mm)

T (Head length)(mm)

TC (T dimension alteration)(mm)

type

Surface treatment

CAD

Days to Ship

Specify Alterations

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB