(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Resin Oli Free Bushing, High Temperature(PA)【10-50 Pieces Per Package】

Resin Oli Free Bushing, High Temperature(PA)

Click this image to zoom it.

Move the mouse over the image to zoom

Product Overview
・Engineering plastic has such features as excellent self-lubrication, wear resistance, and low friction coefficient. Normal operation is enabled even with poor lubrication.
・ Engineering plastic, a metal replacement used as the material of oil free bushings, have major advantages: lubrication and maintenance free, longer service life, good corrosion resistance performance, high cost effectiveness, etc..
・ Engineering plastic bearings are suitable for clean room and contaminated environments, as well as vacuum and high-humidity environments.

Product PhotoProduct Photo
Product Features
1. Highly chemical resistant and high temperature resistant oil free bushings, suitable for operating under high-speed and high-load conditions.
2. Wide operating temperature range: max. operating temperature +250℃ (short-term +315℃), min. operating temperature -100℃.
3. Operating load up to 150MPa.
4. Outstanding abrasion resistance, lower water absorption, high compressive strength and other features.
Dimensional Drawing
(Unit: mm)

Recommended to be used for pressing in and fixing the bushing.
Material: PEEK
Specification Table
Ordering Example
 
Part NumberTotal Length Ld
(Tolerance after pressing-in)
DFT
TypeNo.
E-MXBZ
(Straight Type)

E-MXFZ

(Shouldered Type)
0203(03)             2+0.006
+0.046
3.5
0304(03) 05*           34.57.50.75
0405 (04)  06*         4+0.010
+0.058
5.59.5
0507  05   (08)       57111
0608    (06) 08 10     6812
0810      (08) (10)     8+0.013
+0.071
10
1012    06* 08*09*(10) 15* (20) 1012181
1214   5.5*   09* 12*15* (20) 12+0.016
+0.086
1420
1416          (15)17*  141622
1517    06*(07)   12*(15)   151723
1618         12* 17*  161824
1820             22*182026
2023            (20) 20+0.020
+0.104
23
2528         (12)    2528
Dimensions L with ( ) is only for the straight type
Dimensions L with * is only for the shouldered type
Usage Method
Example of Use
Usage Method 1
Specifications Overview
Specification Diagram 1

Specification Diagram 2
Example of Use
Clamping & welding device (Slide up and down through clamping & welding parts of the cam bearing mechanism)
Example of Use 1

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
E-MXBZ-0203-03
E-MXBZ-0304-03
E-MXBZ-0304-06
E-MXBZ-0405-04
E-MXBZ-0405-06
E-MXBZ-0405-09
E-MXBZ-0405-10
E-MXBZ-0507-05
E-MXBZ-0507-08
E-MXBZ-0507-10
E-MXBZ-0608-06
E-MXBZ-0608-08
E-MXBZ-0608-10
E-MXBZ-0810-06
E-MXBZ-0810-08
E-MXBZ-0810-10
E-MXBZ-0810-12
E-MXBZ-0810-15
E-MXBZ-1012-06
E-MXBZ-1012-08
E-MXBZ-1012-10
E-MXBZ-1012-20
E-MXBZ-1214-06
E-MXBZ-1214-10
E-MXBZ-1214-12
E-MXBZ-1214-15
E-MXBZ-1214-20
E-MXBZ-1214-25
E-MXBZ-1416-12
E-MXBZ-1416-15
E-MXBZ-1517-07
E-MXBZ-1517-10
E-MXBZ-1517-15
E-MXBZ-1517-20
E-MXBZ-1517-25
E-MXBZ-1618-10
E-MXBZ-1618-12
E-MXBZ-1618-15
E-MXBZ-1618-20
E-MXBZ-1820-15
E-MXBZ-1820-20
E-MXBZ-2023-07
E-MXBZ-2023-10
E-MXBZ-2023-15
E-MXBZ-2023-20
E-MXBZ-2023-25
E-MXBZ-2023-30
E-MXBZ-2225-15
E-MXBZ-2225-20
E-MXBZ-2528-7.7
E-MXBZ-2528-12
E-MXBZ-2528-15
E-MXBZ-2528-20
E-MXBZ-2832-20
E-MXBZ-3034-25
E-MXBZ-3034-30
E-MXBZ-3034-40
E-MXBZ-3539-20
E-MXBZ-4044-40
E-MXBZ-5055-40
Part NumberNumber of pc(s). included in pkg.Minimum order quantityVolume DiscountDays to ShipRoHSType Inner Dia. d
(Ø)
Outer Dia. D
(Ø)
Overall Length L
(mm)

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight23.53

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight34.53

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight34.56

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight45.54

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight45.56

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight45.59

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight45.510

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight575

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight578

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight5710

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight686

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight688

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight6810

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight8106

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight8108

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight81010

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight81012

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight81015

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight10126

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight10128

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight101210

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight101220

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight12146

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight121410

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight121412

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight121415

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight121420

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight121425

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight141612

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight141615

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight15177

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight151710

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight151715

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight151720

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight151725

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight161810

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight161812

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight161815

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight161820

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight182015

50 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight182020

10 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight20237

10 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight202310

10 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight202315

10 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight202320

10 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight202325

10 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight202330

10 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight222515

10 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight222520

10 Pieces Per Package

1 Pack(s)Available 10 Day(s) 10Straight25287.7

10 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight252812

10 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight252815

10 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight252820

10 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight283220

10 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight303425

10 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight303430

10 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight303440

10 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight353920

10 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight404440

10 Pieces Per Package

1 Pack(s)Available 10 Day(s) -Straight505540

Loading...

Dimensional Drawing
(Unit: mm)

Recommended to be used for pressing in and fixing the bushing.
Material: PEEK
Specification Table
Ordering Example
 
Part NumberTotal Length Ld
(Tolerance after pressing-in)
DFT
TypeNo.
E-MXBZ
(Straight Type)

E-MXFZ

(Shouldered Type)
0203(03)             2+0.006
+0.046
3.5
0304(03) 05*           34.57.50.75
0405 (04)  06*         4+0.010
+0.058
5.59.5
0507  05   (08)       57111
0608    (06) 08 10     6812
0810      (08) (10)     8+0.013
+0.071
10
1012    06* 08*09*(10) 15* (20) 1012181
1214   5.5*   09* 12*15* (20) 12+0.016
+0.086
1420
1416          (15)17*  141622
1517    06*(07)   12*(15)   151723
1618         12* 17*  161824
1820             22*182026
2023            (20) 20+0.020
+0.104
23
2528         (12)    2528
Dimensions L with ( ) is only for the straight type
Dimensions L with * is only for the shouldered type

Basic Information

Environment Standard / Heat Resistant / Foreign Object Resistant / Vibration Resistant / In Oil / In Water / In Seawater / In Chemical Resin Type High performance polymer composition Mounting Hole Fits H7
Lubrication Unlubricated

Frequently asked question (FAQ)

Question: What are oil free bushings and what are their features?
Answer: Plain bearings where the body of the bushing is saturated with lubricant and can be used "without oil" or "with a reduced oil supply".
Oil free bushings have the following features:
1. Low maintenance frequency;
2. Suitable for low speed and heavy load situations, compared with ball linear bearings;
3. Can also be used under harsh conditions of high temperature and low temperature;
4. Thinner and space saving, compared with linear bearings;
5. Can be used for both linear and rotational motions.
Question: What are the materials and features of MISUMI oil free bushings?
Answer: MISUMI oil free bushings are available in 5 types, i.e. copper alloy, bronze casting, dry, resin, and casting.
Copper alloy (metal type), excellent resistance to high temperature, chemicals and shock, suitable for heavy duty and low speed operation.
Bronze casting (metal type) with excellent sinter resistance, enabling slight movements, suitable for low load and high speed operation.
Dry type (composite layer type), high temperature resistant, suitable for heavy duty and low speed operation, thin-walled and compact.
Resin (resin type), high temperature and chemical resistant (tetrafluoroethylene resin), complying with food sanitation law, suitable for low load and low speed operation.
Castings (metal type), suitable for medium load and low speed operation.
Question: What are the types of MISUMI oil-free bushings available?
Answer: There are straight type, shouldered type, thrust type, flange integrated type, flange type housing unit (built-in copper alloy bushing), and threaded sleeve type (built-in copper alloy bushing).

Tech Support