(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model

Click this image to zoom it.

Move the mouse over the image to zoom

On Sale Till 31/03/2025
Volume Discount

MISUMI

The Misumi's unique lineup of fine flute length is available at attractive low prices

XAL
General Steel
2 Flutes

Part Number

Configured Part Number is shown.

Drawing
Part Numbers
Specification and price
Features and Example
Catalog

XAL series carbide square end mill, 2-flute / 3D Flute Length model:Related Image

: 30; 45; 60

Part Number
XAL-PEM2R0.1
XAL-PEM2R0.2
XAL-PEM2R0.3
XAL-PEM2R0.4
XAL-PEM2R0.6
XAL-PEM2R0.7
XAL-PEM2R0.8
XAL-PEM2R1.1
XAL-PEM2R1.3
XAL-PEM2R1.4
XAL-PEM2R1.6
XAL-PEM2R1.7
XAL-PEM2R1.9
XAL-PEM2R2.1
XAL-PEM2R2.2
XAL-PEM2R2.3
XAL-PEM2R2.4
XAL-PEM2R2.6
XAL-PEM2R2.7
XAL-PEM2R2.8
XAL-PEM2R2.9
XAL-PEM2R3.1
XAL-PEM2R3.2
XAL-PEM2R3.3
XAL-PEM2R3.4
XAL-PEM2R3.6
XAL-PEM2R3.7
XAL-PEM2R3.8
XAL-PEM2R3.9
XAL-PEM2R4.1
XAL-PEM2R4.2
XAL-PEM2R4.3
XAL-PEM2R4.4
XAL-PEM2R4.6
XAL-PEM2R4.7
XAL-PEM2R4.8
XAL-PEM2R4.9
XAL-PEM2R5.1
XAL-PEM2R5.2
XAL-PEM2R5.3
XAL-PEM2R5.4
XAL-PEM2R5.6
XAL-PEM2R5.7
XAL-PEM2R5.8
XAL-PEM2R5.9
XAL-PEM2R6.5
XAL-PEM2R7.5
XAL-PEM2R8.5
XAL-PEM2R9.5
XAL-PEM2R18

Minimum order quantity	Volume Discount	Days to Ship	Outer Diameter (D) (φ)	Work Material	Flute Length (ℓ) (mm)	Shank Diameter (d) (mm)	Overall Length (L) (mm)	Processing Applications	Geometry	Figure
1 Piece(s)	Available	16 Day(s) or more	0.1	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	0.3	3	40	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	0.2	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	0.6	3	40	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	0.3	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	0.9	3	40	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	0.4	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	1.2	3	40	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	0.6	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	1.8	3	40	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	0.7	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	2.1	3	40	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	0.8	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	2.4	3	40	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	1.1	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	3.3	4	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	1.3	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	3.9	4	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	1.4	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	4.2	4	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	1.6	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	4.8	4	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	1.7	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	5.1	4	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	1.9	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	5.7	4	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	2.1	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	6.3	4	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	2.2	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	6.6	4	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	2.3	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	6.9	4	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	2.4	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	7.2	4	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	2.6	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	7.8	4	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	2.7	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	8.1	4	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	2.8	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	8.4	4	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	2.9	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	8.7	4	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	3.1	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	9.3	6	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	3.2	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	9.6	6	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	3.3	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	9.9	6	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	3.4	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	10.2	6	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	3.6	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	10.8	6	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	3.7	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	11.1	6	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	3.8	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	11.4	6	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	3.9	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	11.7	6	45	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	4.1	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	12.3	6	50	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	4.2	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	12.6	6	50	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	4.3	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	12.9	6	50	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	4.4	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	13.2	6	50	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	4.6	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	13.8	6	55	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	4.7	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	14.1	6	55	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	4.8	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	14.4	6	55	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	4.9	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	14.7	6	55	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	5.1	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	15.3	6	55	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	5.2	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	15.6	6	55	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	5.3	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	15.9	6	55	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	5.4	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	16.2	6	55	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	5.6	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	16.8	6	60	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	5.7	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	17.1	6	60	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	5.8	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	17.4	6	60	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	5.9	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	17.7	6	60	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	6.5	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	19.5	8	60	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	7.5	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	22.5	8	70	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	8.5	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	25.5	10	70	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	9.5	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	28.5	10	75	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1
1 Piece(s)	Available	16 Day(s) or more	18	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○]	54	16	110	Flat Surface / Side Surface / Inclined Cutting	Sharp Corner	1

Specifications

XAL series carbide square end mill, 2-flute / 3D Flute Length model:Related Image

Model Number			Shank Diameter d	Flute Length ℓ	Overall Length L	Figure	Standards Y/N
	Outer Diameter D	Shank Diameter d					Standards Y/N
	Outer Diameter D	Shank Diameter d					Standard	Sharp Edge
XAL-EM2R (Standard) XAL-PEM2R (Sharp Edge)	0.1	—	3	0.3	40	1	No Standards	●
	0.2	—	3	0.6	40	1	No Standards	●
	0.3	—	3	0.9	40	1	●	●
	0.4	—	3	1.2	40	1	No Standards	●
	0.5	—	3	1.5	40	1	●	●
	0.6	—	3	1.8	40	1	●	●
	0.7	—	3	2.1	40	1	No Standards	●
	0.8	—	3	2.4	40	1	●	●
	0.9	—	4	2.7	45	1	No Standards	●
	1	—	4	3	45	1	●	●
	1.1	—	4	3.3	45	1	No Standards	●
	1.2	—	4	3.6	45	1	No Standards	●
	1.3	—	4	3.9	45	1	No Standards	●
	1.4	—	4	4.2	45	1	No Standards	●
	1.5	—	4	4.5	45	1	●	●
	1.6	—	4	4.8	45	1	No Standards	●
	1.7	—	4	5.1	45	1	No Standards	●
	1.8	—	4	5.4	45	1	No Standards	●
	1.9	—	4	5.7	45	1	No Standards	●
	2	—	4	6	45	1	●	●
	2.1	—	4	6.3	45	1	No Standards	●
	2.2	—	4	6.6	45	1	No Standards	●
	2.3	—	4	6.9	45	1	No Standards	●
	2.4	—	4	7.2	45	1	No Standards	●
	2.5	—	4	7.5	45	1	No Standards	●
	2.6	—	4	7.8	45	1	No Standards	●
	2.7	—	4	8.1	45	1	No Standards	●
	2.8	—	4	8.4	45	1	No Standards	●
	2.9	—	4	8.7	45	1	No Standards	●
	3	4	4	9	45	1	No Standards	●
	3	—	6	9	45	1	●	●
	3.1	—	6	9.3	45	1	No Standards	●
	3.2	—	6	9.6	45	1	No Standards	●
	3.3	—	6	9.9	45	1	No Standards	●

[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).

Model Number			Shank Diameter d	Flute Length ℓ	Overall Length L	Figure	Standards Y/N
	Outer Diameter D	Shank Diameter d					Standards Y/N
	Outer Diameter D	Shank Diameter d					Standard	Sharp Edge
XAL-EM2R (Standard) XAL-PEM2R (Sharp Edge)	3.4	—	6	10.2	45	1	No Standards	●
	3.5	—	6	10.5	45	1	●	●
	3.6	—	6	10.8	45	1	No Standards	●
	3.7	—	6	11.1	45	1	No Standards	●
	3.8	—	6	11.4	45	1	No Standards	●
	3.9	—	6	11.7	45	1	No Standards	●
	4	4	4	12	50	2	No Standards	●
	4	—	6	12	50	1	●	●
	4.1	—	6	12.3	50	1	No Standards	●
	4.2	—	6	12.6	50	1	No Standards	●
	4.3	—	6	12.9	50	1	No Standards	●
	4.4	—	6	13.2	50	1	No Standards	●
	4.5	—	6	13.5	50	1	No Standards	●
	4.6	—	6	13.8	55	1	No Standards	●
	4.7	—	6	14.1	55	1	No Standards	●
	4.8	—	6	14.4	55	1	No Standards	●
	4.9	—	6	14.7	55	1	No Standards	●
	5	—	6	15	55	1	●	●
	5.1	—	6	15.3	55	1	No Standards	●
	5.2	—	6	15.6	55	1	No Standards	●
	5.3	—	6	15.9	55	1	No Standards	●
	5.4	—	6	16.2	55	1	No Standards	●
	5.5	—	6	16.5	55	1	No Standards	●
	5.6	—	6	16.8	60	1	No Standards	●
	5.7	—	6	17.1	60	1	No Standards	●
	5.8	—	6	17.4	60	1	No Standards	●
	5.9	—	6	17.7	60	1	No Standards	●
	6	—	6	18	60	2	●	●
	6.5	—	8	19.5	60	1	No Standards	●
	7	—	8	21	60	1	●	●
	7.5	—	8	22.5	70	1	No Standards	●
	8	—	8	24	70	2	●	●
	8.5	—	10	25.5	70	1	No Standards	●
	9	—	10	27	70	1	No Standards	●
	9.5	—	10	28.5	75	1	No Standards	●
	10	—	10	30	80	2	●	●
	11	—	12	33	85	1	No Standards	●
	12	—	12	36	85	2	●	●
	14	—	12	42	80	3	●	No Standards
	16	—	16	48	110	2	●	●
	18	—	16	54	110	3	No Standards	●
	20	—	20	60	110	2	●	●

[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).

More Information

● An affordable set price that moves according to quantity from 3 pieces and up.
● The XAL coating with excellent lubricity delivers stable wear-resistant performance, especially when milling raw materials, giving improved shape accuracy to the machined objects.
● 2-flute end mill with a wide operating range. Use for a variety of applications.
[ ! ]The XAL coating does not have conductive properties. Cannot be used with conduction model tool setters.

Product TOP

Basic Information

Number of Flutes(sheet)	2	Model	Square	Coating	For General Steel (AlCrN etc.)
Torsion Angle (θ)	Standard Helix (30 to 40°)	Additional Classification	Stocked Product	Tolerance of OD(mm)	0 ~ -0.02
● Inventory Product □ Manufacturer Product	●

Configure

50 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Outer Diameter (D)(φ)
0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1

1.1

1.2

1.3

1.4

1.5

1.6

1.7

1.8

1.9

2

2.1

2.2

2.3

2.4

2.5

2.6

2.7

2.8

2.9

3

3.1

3.2

3.3

3.4

3.5

3.6

3.7

3.8

3.9

4

4.1

4.2

4.3

4.4

4.5

4.6

4.7

4.8

4.9

5

5.1

5.2

5.3

5.4

5.5

5.6

5.7

5.8

5.9

6

6.5

7

7.5

8

8.5

9

9.5

10

11

12

14

16

18

20
Clear
Flute Length (ℓ)(mm)
0.3

0.6

0.9

1.2

1.5

1.8

2.1

2.4

2.7

3

3.3

3.6

3.9

4.2

4.5

4.8

5.1

5.4

5.7

6

6.3

6.6

6.9

7.2

7.5

7.8

8.1

8.4

8.7

9

9.3

9.6

9.9

10.2

10.5

10.8

11.1

11.4

11.7

12

12.3

12.6

12.9

13.2

13.5

13.8

14.1

14.4

14.7

15

15.3

15.6

15.9

16.2

16.5

16.8

17.1

17.4

17.7

18

19.5

21

22.5

24

25.5

27

28.5

30

33

36

42

48

54

60
Clear
Shank Diameter (d)(mm)
3

4

6

8

10

12

16

20
Clear
Overall Length (L)(mm)
40

45

50

55

60

70

75

80

85

110
Clear
Processing Applications
- Flat Surface
- Side Surface
- Groove
- Inclined Cutting
Clear
Geometry
- Sharp Corner
- With Lead
Clear
type
- XAL-EM2R
- XAL-PEM2R
Clear
Work Material
- General Steel
- Heat-Treated Steel
- Stainless Steel
- Cast Iron
- Aluminum Alloy
- Copper Alloy
- Resin
Clear

Days to Ship

All

Same day

12 Day(s) or Less

16 Day(s) or Less

18 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

Cutting Tool/Industrial Processing Part: Tel：021-8990-4102 / FAX：021-8990-5803; 8:30am - 5:30pm (Monday - Friday); Technical Inquiry

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model

Specifications

More Information

Basic Information

Configure

Specification/Dimensions

Outer Diameter (D)(φ)

Flute Length (ℓ)(mm)

Shank Diameter (d)(mm)

Overall Length (L)(mm)

Processing Applications

Geometry

type

Work Material

Days to Ship

Specify Alterations

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model

Specifications

More Information

Basic Information

Configure

Specification/Dimensions

Outer Diameter (D)(φ)

Flute Length (ℓ)(mm)

Shank Diameter (d)(mm)

Overall Length (L)(mm)

Processing Applications

Geometry

type

Work Material

Days to Ship

Specify Alterations

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB