CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Regular Model

CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Regular Model
  • Volume Discount

The CrN coating with excellent lubricity exhibits power in copper electrode processing

  • CrN
  • Copper
  • 2 Flutes
  • R (Regular)

CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Regular Model:Related Image

Part Number
CRN-CUEM0.5
CRN-CUEM0.8
CRN-CUEM1
CRN-CUEM1.5
CRN-CUEM2
CRN-CUEM2.5
CRN-CUEM3
CRN-CUEM4
CRN-CUEM5
CRN-CUEM6
CRN-CUEM8
CRN-CUEM10
CRN-CUEM12
Part NumberVolume DiscountDays to ShipOuter Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Tolerance of OD
(mm)
Figure ● Inventory Product □ Manufacturer Product
Available 11 Day(s) or more 0.51.54500 ~ -0.021
Available 11 Day(s) or more 0.82.44500 ~ -0.021
Available 11 Day(s) or more 134500 ~ -0.021
Available 11 Day(s) or more 1.54.54500 ~ -0.021
Available 11 Day(s) or more 264500 ~ -0.021
Available 11 Day(s) or more 2.57.54500 ~ -0.021
Available 11 Day(s) or more 396600 ~ -0.021
Available 11 Day(s) or more 4126600 ~ -0.021
Available 11 Day(s) or more 5156700 ~ -0.021
Available 11 Day(s) or more 6186700 ~ -0.022
Available 11 Day(s) or more 8248800 ~ -0.022
Available 11 Day(s) or more 103010900 ~ -0.022
Available 11 Day(s) or more 123612900 ~ -0.022

Loading...

  1. 1

Specifications

CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Regular Model:Related Image

Model Number   Flute Length
Overall Length
L
Shank Diameter
d
Figure
Outer Diameter
D
CRN-CUEM 0.5 1.5 50 4 1
0.8 2.4 50 4 1
1 3 50 4 1
1.5 4.5 50 4 1
2 6 50 4 1
2.5 7.5 50 4 1
3 9 60 6 1
4 12 60 6 1
5 15 70 6 1
6 18 70 6 2
8 24 80 8 2
10 30 90 10 2
12 36 90 12 2


For Cutting Conditions, Refer to >>Click here.

More Information


The blade tip has a sharp edge allowing corner edges to also be machined.

Basic Information

Work Material Aluminum Alloy / Copper Alloy / Resin Number of Flutes(sheet) 2 Model Square
Coating CrN Processing Applications Flat Surface / Side Surface / Groove / Inclined Cutting Geometry Sharp Corner
Torsion Angle (θ) Weak Helix (15 to 25°) Additional Classification Stocked Product

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)