• Due to the typhoon in Japan, large-scale blackout have occurred in Narita city where Misumi Shipping center is located, and the recovery is being delayed. (Newspaper article https://the-japan-news.com/news/article/0005997110 source: The Japan News) Because of the above reason, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding.

Carbide Pilot Hole Correction Boring Bit

Carbide Pilot Hole Correction Boring Bit

In case the hole pitch has an intersection or the inclination tolerance of the hole is demanding.
By using it before finishing the reamer, the bend of the hole can be modified.


Carbide Pilot Hole Correction Boring Bit:Related Image
Part Number
Part NumberVolume DiscountDays to ShipTool Diameter
No. Shank Diameter d
Overall Length L
Runout Length (ℓ)
Tool Material Type
13 Day(s) or more 1.8 ~ 233406 ~ 10Carbide
13 Day(s) or more 1.8 ~ 3.544506 ~ 15Carbide
13 Day(s) or more 2.5 ~ 5666010 ~ 20Carbide


  1. 1


Carbide Pilot Hole Correction Boring Bit:Related Image

Model Number Flute Diameter
0.1 mm Increment Designation
Recess Length

1 mm Increment Designation
Overall Length
Shank Diameter
BRB31.8 ~ 2.06 ~ 10403
41.8 ~ 2.46 ~ 10504
2.5 ~ 3.510 ~ 15
62.5 ~ 3.010 ~ 15606
3.1 ~ 5.010 ~ 20

More Information

When there is tolerance on the hole pitch, or when the allowable margin of error in the hole inclination is very limited, the use of this product before finishing with a reamer allows the hole skew to be corrected.

■Reference examples of machining process
(when positional accuracy, diameter precision, or surface roughness are required)
Finished DiameterDiameter of Pilot Hole
(drill diameter)
Diameter of Pilot Hole
(bit diameter)
Pentagonal, Hexagonal
Ø 2.0Ø 1.7Ø 1.8Ø 1.98Ø 2.00
Ø 2.5Ø 2.2Ø 2.3Ø 2.48Ø 2.50
Ø 3.0Ø 2.7Ø 2.8Ø 2.98Ø 3.00
Ø 3.5Ø 3.2Ø 3.3Ø 3.48Ø 3.50
Ø 4.0Ø 3.7Ø 3.8Ø 3.98Ø 4.00
Ø 4.5Ø 4.2Ø 4.3Ø 4.48Ø 4.50
Ø 5.0Ø 4.7Ø 4.8Ø 4.98Ø 5.00
[ ! ]Machine the finished diameter with a spiral reamer, after drilling pilot holes, if only positional accuracy is required. (a pentagonal or hexagonal reamer is not required)

■ Cutting Conditions
Bit DiameterFeed Rate
F (mm/min)
Revolution Speed
Ø 1.8223,700
Ø 2.3253,400
Ø 2.8273,100
Ø 3.3282,900
Ø 3.8302,700
Ø 4.3312,500
Ø 4.8322,300

Basic Information

Shank type End Mill Shank Work Material General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum / Copper Coating Presence None
Groove Shape Straight Base-Blade Availability None Diameter Tolerance(mm) -0.02 ~ 0

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)