(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Compact Cylinder, C Series

KOGANEI

Rich series configuration available from ø 6 to ø 100. Standard non-ion specification.

(i)Caution

[Information About the End of Sales]Part number: KOG1CDAS, KOG1CDAF, KOG1CSAS, KOG1CDAD, KOG1CDADS, KOG1CCDAKS will be discontinued in April 2022.
After deciding the basic format by the "type" of the narrowing condition on the left side, narrow down the products by the narrowing condition.
The product images are representative only. Please refer to the catalog for shape details.

Part Number

Configured Part Number is shown.

Product Specifications
Part Numbers
Catalog

Drawing

Drive device, standard cylinder, jig cylinder, C series: Related images

ø20 (diameter 20 mm), ø25 (diameter 25 mm)

Drive device, standard cylinder, jig cylinder, C series: Related image 2

ø16 (diameter 16 mm)

Drive device, standard cylinder, jig cylinder, C series: Related image 3

ø12 (diameter 12 mm)

Drive device, standard cylinder, jig cylinder, C series: Related image 4

⌀32 to 100 (diameter 32 to 100 mm)

Drive device, standard cylinder, jig cylinder, C series: Related image 5

⌀32 to 100 (diameter 32 to 100 mm)

Product Specifications

Items	Cylinder diameter
Items	12	16	20	25	32	40	50	63	80	100
Acting model	Double acting type
Operating fluid	Air
Operating pressure range MPa	0.1 to 1.0						0.05 to 1.0
Guaranteed pressure resistant MPa	1.5
Operating temperature range °C	0 to 60
Operating speed range mm/s	30 to 500						30 to 300
Cushion	Rubber bumper method (standard equipment)
Lubrication	Not required (When refueling, turbine oil type 1 "ISO VG32" equivalent)
Piping connection port diameter	M5 × 0.8				Rc1/8		Rc1/4		Rc3/8

Internal structure and name of each part

Double acting (CDA) ø12 to 40 (diameter 12 to 40 mm)
Retaining ring, rod cover, rod packing, piston rod, piston packing, head cover, piston, cylinder main body

⌀50 to 100 (diameter 50 to 100 mm)
Tube gasket

Sensor Cylinder
Sensor switch, magnet, support

Material of main parts

Product name	Cylinder diameter mm
Product name	⌀12	⌀16	⌀20	⌀25	⌀32	⌀40	⌀50	⌀63	⌀80	⌀100
Cylinder main body	Aluminum alloy (anodizing)
Piston	Aluminum alloy (special rust prevention treatment)
Piston rod	Stainless steel (with chrome plating)				Hard steel (with chrome plating)
Packing	Synthetic rubber (NBR)
Rod cover	Aluminum alloy (special abrasion resistant treatment)
Head cover	Aluminum alloy (anodizing)
Retaining Ring	Hard steel (phosphate film)
Bumper	Synthetic rubber (NBR, ø12 only urethane)
Magnet	Resin magnet
Support	Aluminum alloy (special rust prevention treatment)

Standard table

Cylinder diameter and stroke

unit: mm

Acting model	Diameter	Standard stroke
Acting model	Diameter	Standard Cylinder	Sensor Cylinder
Double acting type	12	5, 10, 15, 20, 25, 30	5, 10, 15, 20, 25, 30
	16	5, 10, 15, 20, 25, 30	5, 10, 15, 20, 25, 30
	20	5, 10, 15, 20, 25, 30, 35, 40, 45, 50	5, 10, 15, 20, 25, 30, 35, 40, 45, 50
	25	5, 10, 15, 20, 25, 30, 35, 40, 45, 50	5, 10, 15, 20, 25, 30, 35, 40, 45, 50
	32	5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 75, 100	5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 75, 100
	40	5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 75, 100	5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 75, 100
	50	10, 15, 20, 25, 30, 35, 40, 45, 50, 75, 100	10, 15, 20, 25, 30, 35, 40, 45, 50, 75, 100
	63
	80
	100

Behind the scenes

This product was developed through rigorous testing to meet the customers' needs by combining the design expertise and production technology that the manufacturer has cultivated since its founding.

: 30; 45; 60

Part Number
CDA12X5-B
CDA12X10
CDA12X10-B
CDA12X15
CDA12X15-B
CDA12X20
CDA12X25
CDA12X25-B
CDA12X30
CDA12X30-B
CDA16X15
CDA16X20-B
CDA16X25-B
CDA20X5
CDA20X5-B
CDA20X10-B
CDA20X15
CDA20X15-B
CDA20X25-B
CDA20X30-B
CDA20X40
CDA20X40-B
CDAS12X5-B
CDAS12X10-B
CDAS12X20-B
CDAS12X25
CDAS12X30
CDAS16X15
CDAS16X15-B
CDAS16X20-B
CDAS16X25
CDAS16X25-B
CDAS16X30
CDAS20X5
CDAS20X5-B
CDAS20X10
CDAS20X10-B
CDAS20X20
CDAS20X20-B
CDAS20X25
CDAS20X25-B
CDAS20X30
CDAS20X30-B
CDAS20X35
CDAS20X40-B

Minimum order quantity	Days to Ship	Cylinder Operation Method	Rod Operation Method	Cylinder I.D: D (Ø)	Stroke: L (mm)	Additional Function	Environment, Applications	Operating Temperature (°C)	End Locking	Additional Function, Standard Cylinder Specifications	Sensor specifications	Mounting Type	Rod Tip Specification	Sensor Switches	Lead Wire Length	Number of sensor switches	Bumper	Pilot	Max. Operating Pressure (MPa)	Stroke L2 (mm)	End Keep Position
1 Piece(s)	15 Day(s) or more	Double Acting	Single Rods	12	5	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	12	10	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Female Thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	12	10	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	15 Day(s) or more	Double Acting	Single Rods	12	15	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Female Thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	12	15	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	12	20	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Female Thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	12	25	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Female Thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	12	25	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	12	30	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Female Thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	12	30	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	16	15	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Female Thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	16	20	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	16	25	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	20	5	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Female Thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	20	5	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	20	10	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	20	15	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Female Thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	20	15	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	20	25	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	20	30	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	20	40	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Female Thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	20	40	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	12	5	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	12	10	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	12	20	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	12	25	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Female Thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	12	30	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Female Thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	16	15	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Female Thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	16	15	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	16	20	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	16	25	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Female Thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	16	25	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	16	30	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Female Thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	14 Day(s) or more	Double Acting	Single Rods	20	5	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Female Thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	20	5	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	20	10	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Female Thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	20	10	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	20	20	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Female Thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	20	20	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	20	25	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Female Thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	14 Day(s) or more	Double Acting	Single Rods	20	25	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	20	30	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Female Thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	20	30	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	20	35	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Female Thread	-	-	-	-	-	1.0	-	-
1 Piece(s)	16 Day(s) or more	Double Acting	Single Rods	20	40	Standard	Non-use of Copper and fluoropolymer-based Material (Partially Plating)	0～60	No	-	No	Prototype	Male thread	-	-	-	-	-	1.0	-	-

Product TOP

Basic Information

Main Body Shape	Block shape	Valves	No

Configure

45 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Cylinder Operation Method
- Double Acting
- Single Acting (Extension)
  - Single Acting (Commonly Used for Extruded and Instroke)
  - Single Acting (Extruded)
- Single Acting (Instroke)
Clear
Rod Operation Method
- Single Rods
- Double rod
Clear
Cylinder I.D: D(Ø)
6

8

10

12

16

20

25

40

50

63

80

100
Clear
Stroke: L(mm)
5

8

10

15

20

25

30

35

40

45

50

65

75

100

125

150

175

200

225

250

275

300
Clear
Additional Function
- Standard
- With fall prevention function
- With rod detent function
- Cylinder with functions of thrusting and boosting
- Dual stroke
Clear
Environment, Applications
- Standard
- Low Friction (Internal Resistance)
- Heat Resistant
- Non-use of Copper and fluoropolymer-based Material (Partially Plating)
- Clean Room
Clear
End Locking
- No
- Presence
Clear
Additional Function, Standard Cylinder Specifications
- Lateral Load Resistant Cylinder
- Long Stroke Cylinder
Clear
Sensor specifications
- No
- None
- Yes
Clear
Mounting Type
- Basic type
- Clevis type
- Flange type
- Foot type
- Prototype
Clear
Rod Tip Specification
- Female Thread
- Female thread (standard)
- Male thread
Clear
Sensor Switches
ZE101

ZE102

ZE135

ZE155

ZE175

ZE201

ZE202

ZE235

ZE255

ZE275

None
Clear
Lead Wire Length
- 1m
- 3m
- None
Clear
Number of sensor switches
- 1
- 2
- 3
- 4
- 5
- 7
- 8
- 9
- None
Clear
Bumper
- Available
- No (Standard)
Clear
Pilot
- Available
- No (Standard)
Clear
Max. Operating Pressure(MPa)
- 0.7
- 0.9
- 1.0
Clear
Stroke L2(mm)
0

5

10

15

20

25

30

35

40

45

50

55

60

65

70

75

85

90

100

No
Clear
End Keep Position
- Head Side
- No
- Rod Side
Clear
type
- CBDA
- CBDAS
- CCDA
- CCDAK
- CCDAKS
- CCDAS
- CDA
- CDAD
- CDADF
- CDADS
- CDAF
- CDAFT
- CDAFW
- CDAL
- CDALS
- CDAS
- CDAT
- CDATS
- CDAW
- CDAWS
- CDAZ
- CDAZS
- CSA
- CSAD
- CSADF
- CSADS
- CSAF
- CSAS
- CSAT
- CSATS
- CSAW
- CSAWS
- CTA
- CTAF
- CTAS
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

12 Day(s) or Less

14 Day(s) or Less

15 Day(s) or Less

16 Day(s) or Less

17 Day(s) or Less

18 Day(s) or Less

19 Day(s) or Less

20 Day(s) or Less

21 Day(s) or Less

26 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：021-8990-4102 / FAX：021-8990-5803; 8:30am - 5:30pm (Monday - Friday); Technical Inquiry

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Compact Cylinder, C Series

(i)Caution

Drawing

Product Specifications

Internal structure and name of each part

Material of main parts

Standard table

Cylinder diameter and stroke

Behind the scenes

Basic Information

Configure

Specification/Dimensions

Cylinder Operation Method

Rod Operation Method

Cylinder I.D: D(Ø)

Stroke: L(mm)

Additional Function

Environment, Applications

End Locking

Additional Function, Standard Cylinder Specifications

Sensor specifications

Mounting Type

Rod Tip Specification

Sensor Switches

Lead Wire Length

Number of sensor switches

Bumper

Pilot

Max. Operating Pressure(MPa)

Stroke L2(mm)

End Keep Position

type

CAD