(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping
63,000 Stock items for Same Day Shipping
9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama
63,000 Item Stok untuk Pengiriman di Hari yang Sama
021-8984-0008
021-8984-0008
8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)
8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
Order/Quote
?
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Mechanically Jointed Rodless Cylinder, Basic Type, MY1B Series (Part Numbers)
Air slide table made by SMC
[Features]
· Capable of being used in combination with various guides depending on the conditions
· Simple, space-saving design without any guides
· A wide variety is available from ø10 to ø100
(i)Caution
- Refer to the catalog for product specifications.
- Product pictures are representations. CAD data is not supported by some of the model numbers.
Part Number
Configured Part Number is shown.
Details of Mechanical Joint Type Rodless Cylinder, Basic Type MY1B Series
Product image of Mechanical Joint Type Rodless Cylinder, Basic Type MY1B Series
Model Number Notation
Model number examples
Specifications of Mechanical Joint Type Rodless Cylinder, Basic Type MY1B Series
| Tube Internal Diameter (mm) | 10 | 16 | 20 | 50 | 63 | 80 | 100 | |
|---|---|---|---|---|---|---|---|---|
| Fluid | Air | |||||||
| Operation Type | Double-acting type | |||||||
| Operating Pressure Range | 0.2 to 0.8 MPa | 0.15 to 0.8 MPa | 0.1 to 0.8 MPa | |||||
| Proof Pressure | 1.2 MPa | |||||||
| Ambient and fluid temperature | 5 to 60°C | |||||||
| Cushioning | Rubber cushion | Air cushion | ||||||
| Lubrication | Not required | |||||||
| Stroke Length Tolerance | 1,000 or less (0～+1.8) 1,001 to 3,000 (0～+2.8) | 2,700 or less (0～+1.8) 2,701 to 5,000 (0～+2.8) | ||||||
| Piping Connection Port Diameter | Front/side port | M5 × 0.8 | Rc 3/8 | RC 1/2 | ||||
| Bottom port | - | ø4 (Port size 4 mm) | ø10 (Port size 10 mm) | ø18 (Port size 18 mm) | ||||
Piston Speed
| Tube Internal Diameter (mm) | 10 | 16 | 20 | 50 to 100 | |
|---|---|---|---|---|---|
| No stroke adjustment unit | 100 to 500 mm/s | 100 to 1,000 mm/s | |||
| Stroke adjustment unit | A unit | 100 to 200 mm/s | 100 to 1,000 mm/s *1) | - | |
| L unit, H unit | 100 to 1,000 mm/s | - | 100 to 1,500 mm/s *2) | - | |
*1) Be aware that if the stroke adjustment allowance with the adjust bolt leveling mount increases, the air cushion capacity will decrease.
Meanwhile, in ranges exceeding the air cushion stroke, the working piston speed will become 100 to 200 mm/s.
*2) The piston speed used for centralized piping is 100 to 1,000 mm/s.
*3) Use at a speed within the range of the absorption capacity. Please refer to the catalog.
Theoretical Output Table
(Unit: N)
| Tube inner diameter (mm) | Piston Area (mm^2) | Operating Pressure (MPa) | ||||||
|---|---|---|---|---|---|---|---|---|
| 0.2 | 0.3 | 0.4 | 0.5 | 0.6 | 0.7 | 0.8 | ||
| 10 | 78 | 15 | 23 | 31 | 39 | 46 | 54 | 62 |
| 16 | 200 | 40 | 60 | 80 | 100 | 120 | 140 | 160 |
| 20 | 314 | 62 | 94 | 125 | 157 | 188 | 219 | 251 |
| 50 | 1,962 | 392 | 588 | 784 | 981 | 1,177 | 1,373 | 1,569 |
| 63 | 3,115 | 623 | 934 | 1,246 | 1,557 | 1,869 | 2,180 | 2,492 |
| 80 | 5,024 | 1,004 | 1,507 | 2,009 | 2,512 | 3,014 | 3,516 | 4,019 |
| 100 | 7,850 | 1,570 | 2,355 | 3,140 | 3,925 | 4,710 | 5,495 | 6,280 |
*) Theoretical output (N) = pressure (MPa) × pressure receiving area (mm^2).
Weight Table
(Unit: kg)
| Tube inner diameter (mm) | Basic weight | Extra weight per 50 strokes | Weight of Moving Parts | Side support Bracket weight (Per pair) | Stroke adjustment unit weight (Per unit) | ||
|---|---|---|---|---|---|---|---|
| A/B type | A unit weight | L unit weight | H unit weight | ||||
| 10 | 0.15 | 0.04 | 0.03 | 0.003 | 0.01 | - | 0.02 |
| 16 | 0.61 | 0.06 | 0.07 | 0.01 | 0.04 | - | - |
| 20 | 1.06 | 0.10 | 0.14 | 0.02 | 0.05 | 0.05 | 0.10 |
| 50 | 7.78 | 0.44 | 1.40 | 0.04 | - | - | - |
| 63 | 13.10 | 0.70 | 2.20 | 0.08 | - | - | - |
| 80 | 20.70 | 1.18 | 4.80 | 0.17 | - | - | - |
| 100 | 35.70 | 1.97 | 8.20 | 0.17 | - | - | - |
Calculation method/example: MY1B20-300 A
- Basic weight: 1.06 kg
- Cylinder Stroke: 300st
- Extra weight: 0.10/50st
- A unit weight: 1.76 kg
1.06 + 0.10 × 300 ÷ 50 + 0.05 × 2 ≒ 2.17 kg
Structural drawing of centralized piping type / MY1B10G
Structural drawing of centralized piping type / MY1B10G
Component parts table of centralized piping type/ MY1B10G
Image 1 for components parts table of centralized piping type / MY1B10G
Image 2 for components parts table of centralized piping type / MY1B10G
Structural drawing of MY1B16, MY1B20, MY1B50 to MY1B100
Structural drawing of MY1B16, MY1B20, MY1B50 to MY1B100
MY1B16, MY1B20, MY1B50 to MY1B100 components
Image 1 for components parts table of MY1B16, MY1B20, MY1B50 to MY1B100 components parts table
Image 2 of MY1B16, MY1B20, MY1B50 to MY1B100 components
Dimensions example of Mechanical Joint Type Rodless Cylinder, Basic Type MY1B Series
Centralized piping type: ø10 (Cylinder inner diameter: 10 mm)
(Units: mm)
Dimensional drawing of MY1B10G-Stroke
Standard type / centralized piping type ø16 (Cylinder inner diameter: 16 mm), ø20 (Cylinder inner diameter: 20 mm)
(Units: mm)
Dimensional drawing of MY1B16□/MY1B20□-Stroke
(Units: mm)
Image 1 of dimensions table for MY1B16□/MY1B1620□
(Units: mm)
Image 2 of dimensional drawing table for MY1B16□/MY1B20
Dimensional drawing of MY1B16□/MY1B20 piping hole for centralized bottom piping (right: Bottom side piping (Applicable O-ring)
(Units: mm)
Image of piping hole dimension table for centralized bottom piping MY1B16□/MY1B20
* Please process the mounting surface with these dimensions.
Standard type / centralized piping type ø50 (Cylinder inner diameter: 50 mm), ø63 (Cylinder inner diameter: 63 mm)
Dimensional drawing of MY1B50□/MY1B63□-Stroke
(Units: mm)
Dimension table image 1 of MY1B50□/MY1B63□
(Units: mm)
Dimension table image 2 of MY1B50□/MY1B63□
Dimensional drawing of piping hole for centralized bottom piping MY1B50□/MY1B63 (right: Bottom side piping (Applicable O-ring)
(Units: mm)
Image of piping hole dimension table for centralized bottom piping of MY1B50□/MY1B63□
* Please process the mounting surface with these dimensions.
Standard type / centralized piping type ø80 (Cylinder inner diameter: 80 mm), ø100 (Cylinder inner diameter: 100 mm)
(Units: mm)
Dimensional drawing of MY1B80□/MY1B100□-Stroke
(Units: mm)
Dimension table image 1 of MY1B80□/MY1B100□
(Units: mm)
Dimension table image 2 of MY1B80□/MY1B100□
Dimensional drawing of MY1B80□/MY1B100□piping hole for centralized bottom piping (right: Bottom side piping (Applicable O-ring)
(Units: mm)
Image of piping hole dimension table for centralized bottom piping MY1B80□/MY1B100□
* Please process the mounting surface with these dimensions.
Please refer to the table below for details about lead wire / connector specifications.
| Part Number | Minimum order quantity | Volume Discount | Days to Ship | Type | Stroke (mm) | Table Material | Max. Load Mass (Horizontal Mounting) (kg) | Max. Load Mass (kg) | Table Size: Length L (mm) | Cylinder I.D. (Ø) | Rodless Cylinder Joint Type | Environment | Table Surface Treatment | Guide Type | Table Size: Width W (mm) | Table Size: Height H (mm) | Operating Pressure (MPa) | Piping Format | Port Screw Type | Cushion | Specifications | Auto Switches | Lead Wire Length (m) | Lead Wire Connector | The number of the switches | Custom-made Specifications | Custom-made | Stroke adjustment unit symbol | Made-to-order | Spacer for intermediate fixing | Type | Applicable inner diameter of cylinder (ø) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Standard type | Rc | Air cushion | Magnet built-in | Y59B | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Standard type | Rc | Air cushion | Magnet built-in | Y59B | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Standard type | Rc | Air cushion | Magnet built-in | Y69B | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Standard type | Rc | Air cushion | Magnet built-in | Z73 | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Standard type | Rc | Air cushion | Magnet built-in | Z73 | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | Helical coil insert thread specification | - | - | - | ||
| 1 Piece(s) | 20 Day(s) | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Standard type | Rc | Air cushion | Magnet built-in | Z73 | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Standard type | Rc | Air cushion | Magnet built-in | Z73 | 3 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Standard type | Rc | Air cushion | Magnet built-in | Z73 | 0.5 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Standard type | Rc | Air cushion | Magnet built-in | Z73 | 5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Standard type | Rc | Air cushion | Magnet built-in | Z76 | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Standard type | Rc | Air cushion | Magnet built-in | Z76 | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Standard type | Rc | Air cushion | Magnet built-in | Z76 | 3 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Standard type | Rc | Air cushion | Magnet built-in | Z76 | 0.5 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Standard type | Rc | Air cushion | Magnet built-in | Z80 | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Standard type | Rc | Air cushion | Magnet built-in | Z80 | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Standard type | Rc | Air cushion | Magnet built-in | Z80 | 3 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Standard type | Rc | Air cushion | Magnet built-in | Z80 | 0.5 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | 20 Day(s) | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | None | - | - | - | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7BW | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7BW | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7BW | 3 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7BW | 0.5 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7BWV | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7BWV | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7BWV | 3 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7BWV | 0.5 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7NW | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7NW | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7NW | 3 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7NW | 0.5 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7NWV | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7NWV | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7NWV | 3 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7NWV | 0.5 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7PW | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7PW | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7PW | 3 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7PW | 0.5 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7PWV | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7PWV | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7PWV | 3 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y7PWV | 0.5 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Y59B | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z73 | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z73 | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z73 | 3 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z73 | 0.5 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z73 | 5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z76 | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z76 | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z76 | 3 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z76 | 0.5 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z80 | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z80 | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z80 | 3 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z80 | 0.5 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Standard type | G | Air cushion | Magnet built-in | None | - | - | - | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | G | Air cushion | Magnet built-in | None | - | - | - | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 60~80 | 70 | 200 | 50 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 80 | 94 | - | Centralized piping type | NPT | Air cushion | Magnet built-in | None | - | - | - | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | 20 Day(s) | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Standard type | Rc | Air cushion | Magnet built-in | None | - | - | - | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Standard type | Rc | Air cushion | Magnet built-in | M9BV | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Standard type | Rc | Air cushion | Magnet built-in | M9BV | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Standard type | Rc | Air cushion | Magnet built-in | M9BW | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Standard type | Rc | Air cushion | Magnet built-in | M9N | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Standard type | Rc | Air cushion | Magnet built-in | M9PW | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Standard type | Rc | Air cushion | Magnet built-in | None | - | - | - | 0.1 to 0.8 | - | No unit | Dust seal band NBR lining specifications | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Standard type | Rc | Air cushion | Magnet built-in | Z73 | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | 20 Day(s) | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Standard type | Rc | Air cushion | Magnet built-in | Z73 | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Standard type | Rc | Air cushion | Magnet built-in | Z73 | 3 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Standard type | Rc | Air cushion | Magnet built-in | Z73 | 0.5 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Standard type | Rc | Air cushion | Magnet built-in | Z73 | 5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Standard type | Rc | Air cushion | Magnet built-in | Z76 | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Standard type | Rc | Air cushion | Magnet built-in | Z76 | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Standard type | Rc | Air cushion | Magnet built-in | Z76 | 3 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Standard type | Rc | Air cushion | Magnet built-in | Z76 | 0.5 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Standard type | Rc | Air cushion | Magnet built-in | Z80 | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Standard type | Rc | Air cushion | Magnet built-in | Z80 | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Standard type | Rc | Air cushion | Magnet built-in | Z80 | 3 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Standard type | Rc | Air cushion | Magnet built-in | Z80 | 0.5 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | 20 Day(s) | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | None | - | - | - | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z73 | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z73 | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z73 | 3 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z73 | 0.5 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z73 | 5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z76 | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z76 | 3 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z76 | 3 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z76 | 0.5 | - | 1 | 0.1 to 0.8 | - | No unit | None | - | - | - | ||
| 1 Piece(s) | Quote | Rodless Cylinder | 1,100 | [Aluminum] Aluminum Alloy | 80.1~100.1 | 83 | 230 | 63 | Mechanically Jointed | General Purpose | [Anodize] Hard Anodize | [Guideless] Prototype | 96 | 116 | - | Centralized piping type | Rc | Air cushion | Magnet built-in | Z80 | 0.5 | - | 2 | 0.1 to 0.8 | - | No unit | None | - | - | - |
Loading...
Specification/Dimensions
-
Type
- Rodless Cylinder
- Others
-
Table Material
- Aluminum
- Aluminum
-
Max. Load Mass (Horizontal Mounting)(kg)
-
Max. Load Mass(kg)
-
Table Size: Length L(mm)
-
Cylinder I.D.(Ø)
-
Rodless Cylinder Joint Type
- Mechanically Jointed
-
Environment
- General Purpose
-
Table Surface Treatment
- Anodize
- Anodize
-
Guide Type
- Guideless
- Guideless
-
Table Size: Width W(mm)
-
Table Size: Height H(mm)
-
Operating Pressure(MPa)
-
Piping Format
- Centralized piping type
- Standard type
-
Port Screw Type
-
Cushion
-
Specifications
- Magnet built-in
-
Auto Switches
-
Lead Wire Length(m)
- 0.5
- 1
- 3
- 5
-
Lead Wire Connector
- M8 3‑pin plug connector
- M8 4‑pin plug connector
- M12 4‑pin A cord (normal key) plug connector
- None
-
The number of the switches
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 10
- 11
- 12
-
Custom-made Specifications
-
Custom-made
- None
-
Stroke adjustment unit symbol
-
Made-to-order
- Dust seal band NBR lining specifications
- Helical coil insert thread specification
- Long-stroke type
- None
- Shock absorber / soft-type RJ Series mounted cylinder
-
Spacer for intermediate fixing
- No spacer
-
Type
- Cylinder
- Stroke adjustment unit
-
Applicable inner diameter of cylinder(ø)
- 20
-
type
- MY-A
- MY1B
-
Stroke(mm)
- 1,000
- 1,005
- 1,006
- 1,025
- 1,050
- 1,070
- 1,100
- 1,190
- 1,200
- 1,240
- 1,257
- 1,300
- 1,370
- 1,465
- 1,500
- 1,570
- 1,580
- 1,700
- 1,710
- 1,800
- 1,870
- 1,900
- 2,000
- 50
- 51
- 53
- 55
- 60
- 65
- 67
- 70
- 74
- 75
- 77
- 80
- 81
- 85
- 87
- 88
- 89
- 90
- 97
- 99
- 100
- 101
- 102
- 104
- 105
- 106
- 107
- 108
- 110
- 112
- 113
- 114
- 115
- 116
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 140
- 144
- 145
- 146
- 150
- 152
- 153
- 154
- 155
- 158
- 160
- 164
- 165
- 166
- 167
- 168
- 169
- 170
- 173
- 175
- 176
- 180
- 181
- 184
- 185
- 186
- 187
- 190
- 191
- 193
- 195
- 196
- 200
- 201
- 202
- 204
- 205
- 206
- 207
- 210
- 213
- 215
- 216
- 220
- 225
- 228
- 230
- 235
- 237
- 240
- 244
- 245
- 246
- 250
- 252
- 253
- 254
- 255
- 256
- 258
- 260
- 263
- 264
- 265
- 266
- 270
- 271
- 274
- 275
- 279
- 280
- 282
- 284
- 285
- 286
- 290
- 295
- 298
- 300
- 301
- 302
- 305
- 306
- 307
- 310
- 311
- 315
- 317
- 318
- 320
- 325
- 326
- 327
- 330
- 331
- 334
- 335
- 340
- 345
- 346
- 349
- 350
- 351
- 352
- 354
- 355
- 357
- 358
- 360
- 363
- 365
- 370
- 371
- 372
- 373
- 375
- 377
- 380
- 381
- 385
- 386
- 387
- 388
- 390
- 392
- 395
- 400
- 405
- 408
- 410
- 415
- 416
- 418
- 420
- 425
- 426
- 430
- 433
- 435
- 438
- 440
- 441
- 445
- 449
- 450
- 452
- 453
- 454
- 455
- 456
- 458
- 460
- 462
- 463
- 465
- 467
- 470
- 473
- 475
- 480
- 485
- 490
- 495
- 500
- 505
- 506
- 507
- 508
- 510
- 513
- 515
- 520
- 522
- 525
- 528
- 530
- 533
- 534
- 535
- 536
- 538
- 540
- 545
- 550
- 554
- 555
- 560
- 561
- 565
- 570
- 572
- 574
- 575
- 580
- 582
- 584
- 585
- 590
- 591
- 593
- 595
- 597
- 600
- 602
- 604
- 605
- 610
- 615
- 620
- 622
- 625
- 627
- 628
- 630
- 634
- 635
- 640
- 641
- 645
- 650
- 655
- 656
- 660
- 663
- 664
- 665
- 669
- 670
- 675
- 677
- 680
- 682
- 685
- 686
- 687
- 689
- 690
- 691
- 692
- 700
- 705
- 710
- 711
- 715
- 718
- 720
- 725
- 730
- 735
- 740
- 745
- 749
- 750
- 753
- 755
- 758
- 760
- 762
- 765
- 766
- 770
- 775
- 780
- 785
- 790
- 795
- 800
- 805
- 810
- 813
- 815
- 816
- 820
- 822
- 825
- 830
- 832
- 835
- 838
- 840
- 842
- 844
- 845
- 850
- 852
- 855
- 860
- 863
- 865
- 870
- 875
- 880
- 885
- 890
- 900
- 905
- 910
- 915
- 920
- 925
- 930
- 935
- 936
- 940
- 941
- 945
- 946
- 950
- 955
- 960
- 961
- 964
- 965
- 970
- 975
- 977
- 980
- 983
- 985
- 986
- 990
- 1008
- 1010
- 1015
- 1016
- 1020
- 1030
- 1035
- 1040
- 1045
- 1055
- 1060
- 1065
- 1071
- 1075
- 1080
- 1085
- 1090
- 1095
- 1110
- 1114
- 1115
- 1118
- 1120
- 1125
- 1130
- 1133
- 1135
- 1136
- 1137
- 1140
- 1143
- 1150
- 1155
- 1160
- 1170
- 1175
- 1180
- 1210
- 1215
- 1219
- 1220
- 1225
- 1226
- 1230
- 1235
- 1245
- 1250
- 1252
- 1255
- 1260
- 1265
- 1270
- 1275
- 1280
- 1281
- 1283
- 1284
- 1290
- 1291
- 1305
- 1310
- 1315
- 1320
- 1325
- 1330
- 1335
- 1336
- 1340
- 1350
- 1355
- 1360
- 1365
- 1372
- 1375
- 1385
- 1390
- 1398
- 1400
- 1405
- 1410
- 1420
- 1425
- 1430
- 1435
- 1440
- 1450
- 1455
- 1460
- 1470
- 1475
- 1480
- 1490
- 1501
- 1505
- 1510
- 1520
- 1522
- 1524
- 1525
- 1530
- 1536
- 1540
- 1545
- 1550
- 1575
- 1576
- 1585
- 1590
- 1591
- 1600
- 1610
- 1620
- 1625
- 1626
- 1628
- 1630
- 1632
- 1640
- 1646
- 1650
- 1654
- 1660
- 1665
- 1670
- 1675
- 1676
- 1678
- 1680
- 1685
- 1690
- 1702
- 1705
- 1715
- 1720
- 1725
- 1730
- 1740
- 1742
- 1750
- 1753
- 1755
- 1759
- 1760
- 1770
- 1775
- 1778
- 1780
- 1788
- 1805
- 1810
- 1818
- 1820
- 1825
- 1829
- 1830
- 1840
- 1845
- 1850
- 1855
- 1860
- 1865
- 1875
- 1880
- 1885
- 1888
- 1890
- 1898
- 1905
- 1910
- 1920
- 1925
- 1930
- 1935
- 1950
- 1956
- 1959
- 1970
- 1975
- 1977
- 1988
- 1990
- 1998
- 2700
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 20 Day(s) or Less
- 31 Day(s) or Less
- 40 Day(s) or Less
- 43 Day(s) or Less
- 44 Day(s) or Less
- 51 Day(s) or Less
- 57 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy