(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Compact Direct Operated 2/3 Port Solenoid Valve For Chemical Liquids LVM10/100 Series
· A series of valves with a maximum change in volume of just 0.01 μL when opened or closed.
[Features]
· A compact direct operated 2/3 port solenoid valve for chemical liquids.
· Body ported types and base mounted types.
· Optional power-saving circuit.
· Space saving.
[Applications]
· Ideal for various types of analytic and testing devices.
(i)Caution
- Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
- Refer to the manufacturer's catalog for specification and material details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.
Compact Direct Operated 2/3 Port Solenoid Valve For Chemical Liquids LVM10/100 Series Specifications
Body ported type external appearance
Body ported type (tubing type) external appearance
Base Mounted Type (Without Sub-Plate) external appearance
Base Mounted Type (With Sub-Plate) external appearance
| Model | Body Ported Type | Body Ported Type (Tubing Type) | Base Mounted Type | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| LVM11 | LVM10R1 | LVM10R2 | LVM102R | LVM10R3 | LVM10R4 | LVM10R6 | LVM105R | |||
| Valve Structure | Diaphragm type direct acting poppet | Diaphragm type direct acting poppet (rocker type) | ||||||||
| Valve Type | N.C. | N.C. | N.O. | Universal | N.C. | N.O. | N.C. | Universal | ||
| Number of Ports | 2 | 2 | 3 | 2 | 3 | |||||
| Fluids*1 | Air, water, deionized water (pure water), diluent, detergent | |||||||||
| Operating Pressure Range | 0 to 0.25 MPa | -75 kPa to 0.25 MPa | ||||||||
| Orifice Diameter | 1.5 mm | 1.4 mm | ||||||||
| Response Time*8 | 10 ms or less (with pneumatic pressure) | |||||||||
| Leakage Rate | Zero for both internal and external parts (with hydraulic pressure) | |||||||||
| Proof Pressure*2 | 0.38 MPa | |||||||||
| Ambient Operating Temperature*9 | 0 to 50°C | |||||||||
| Operating Fluid Temperature*9 | 0°C to 50°C (no freezing) | |||||||||
| Volume of Valve Chamber*3 | 11 μL | 20 μL | ||||||||
| Mounting Orientation*4 | Free | |||||||||
| Enclosure | IP40 equivalent | |||||||||
| Weight | 30 g | 34 g (without sub-plate), 42 g (with sub-plate) | ||||||||
| Rated Voltage | 12, 24 V DC | |||||||||
| Allowable Voltage Fluctuation*5 | ±10% of rated voltage | |||||||||
| Coil Insulation Type | Class B | |||||||||
| Power Consumption Current (at 24‑V rated voltage) | Standard Type | - | 1.5 W (0.06 A) | |||||||
| With power-saving circuit | Inrush | 2.5 W (0.1 A) | ||||||||
| Holding | 1 W | |||||||||
| Coil Switching Noise*6 | 50 dB | |||||||||
*1: Select an appropriate material for the wetted parts according to the type of fluid to be used. Be sure to check the chemical resistance beforehand.
*2: Indicates pressures which do not cause breakage or cracks after a 1 minute airtight test.
*3: Indicates the volume of the clearance inside the volume chamber after the volume of the diaphragm has been subtracted.
*4: As the body (orifice shape) is designed to eliminate residual liquid, mounting in a vertical orientation with the coil facing upward is recommended. If liquid pooling is not an issue, it may be installed in any orientation.
*5: If response speed is considered critical, take adequate regulations to prevent voltage fluctuations on the negative side.
*6: This value is depending on the measurement conditions and the sound level may change depending on the measurement conditions.
*7: See the SMC catalog if the valve is to be energized continuously for extended periods of time.
*8: According to JIS B8419:2010
{Value at an ambient and fluid temperature of 25°C, at rated voltage, at the maximum operating pressure (air) and when the N.C. (IN) port is pressurized}
The response time may vary depending on the supply pressure, fluid quality, piping conditions, ambient temperature, etc.
*9: Note that when the diaphragm material is Kalrez, the valve changeover time becomes significantly longer at ambient and fluid temperatures of 15°C or less in comparison to at room temperature (roughly 25°C).
- *Kalrez is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.
Flow Rate Characteristics
| Valve Structure | Water | Air | ||
|---|---|---|---|---|
| Kv | Cv | C | b | |
| Direct acting poppet type | 0.034 | 0.04 | 0.13 | 0.22 |
| Rocker type | 0.025 | 0.03 | 0.1 | 0.2 |
*Kv, Cv values conform to JIS B 2005:1995. C and b values conform to JIB B8390:2000.
Diagram / Body Ported Type
LVM10R1 diagram
LVM10R2 diagram
LVM102R diagram
Component Parts: LVM10R1, 10R2, 102R
| Number | Part Name | Material |
|---|---|---|
| 1 | Plate | PEEK |
| 2 | Diaphragm Assembly | EPDM, FKM, Kalrez |
| 3 | Body | PBT |
| 4 | Slide Bushing Assembly | PPS, SUS |
| 5 | Armature Assembly | SUS/PBT |
| 6 | Coil Assembly | - |
| 7 | Sleeve | SUY |
| 8 | Spacer | PBT |
| 9 | Return Spring | SUS |
| 10 | Board assembly | - |
| 11 | Casing | PBT |
| 12 | Plug | NBR |
| 13 | O-Ring | NBR |
Drawing
(Units: mm)
Body Ported Type LVM11-□□-□ (N.C.)
LVM11-□□-□ (N.C.) dimensional drawing
Body Ported Type LVM10R1-□□-□ (N.C.) / LVM10R2-□□-□ (N.O.) / LVM102R-□□-□ (Universal)
LVM10R1-□□-□ (N.C.) / LVM10R2-□□-□ (N.O.) / LVM102R-□□-□ (universal) dimensional drawing
*Dotted line indicates with bracket.
Base Mounted Type LVM10R3-□□-□ (N.C.) / LVM10R4-□□-□ (N.O.) / LVM10R6-□□-□ (N.C.) / LVM105R-□□-□ (Universal)
LVM10R3-□□-□ (N.C.) / LVM10R4-□□-□ (N.O.) / LVM10R6-□□-□ (N.C.) / LVM105R-□□-□ (universal) dimensions / image recommended interface dimensions
- *Dimensions inside angle brackets indicate dimensions when plate material is PFA (wetted parts material "E, F, G"). When parts material is PFA (wetted parts material "E, F, G") there is no ø1.6‑mm positioning hole.
- *Surface roughness for LVM10R3, LVM10R6 and LVM105R is Rz3.2 or less / surface roughness for LVM10R4 is Rz3.2 or less
Precautions
- *See the SMC catalog for information other than that detailed above.
- *Pictures are of representational models.
| Part Number | Minimum order quantity | Volume Discount | Days to Ship | Switching Type | Connection Type | Plumbing Thread Nominal | Tube Dia. | Orifice Dia. (Ø) | Pipe opening type (details) | Voltage | Option | Power consumption (W) | Lead wire length (mm) | Liquid-contacting parts material | Functions | Subplate specifications | Valve type | CE compliant | Number of ports |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 Piece(s) | 31 Day(s) | Normally Closed | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 24 V DC | None | 1.5 | 300 | Plate: PEEK / Diaphragm: EPDM | Standard Type | None | OUT side indicator symbol: 2 | None | - | ||
| 1 Piece(s) | 31 Day(s) | Normally Closed | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 24 V DC | Bracket | 1.5 | 300 | Plate: PEEK / Diaphragm: EPDM | Standard Type | None | OUT side indicator symbol: 2 | None | - | ||
| 1 Piece(s) | 31 Day(s) | Normally Closed | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 24 V DC | Bracket | 1.5 | 600 | Plate: PEEK / Diaphragm: EPDM | Standard Type | None | OUT side indicator symbol: 2 | None | - | ||
| 1 Piece(s) | 31 Day(s) | Normally Closed | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 24 V DC | Bracket, manual | 1.5 | 300 | Plate: PEEK / Diaphragm: EPDM | Standard Type | None | OUT side indicator symbol: 2 | None | - | ||
| 1 Piece(s) | 31 Day(s) | Normally Closed | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 24 V DC | Bracket | 1.5 | 300 | Plate: PEEK / Diaphragm: Kalrez | Standard Type | None | OUT side indicator symbol: 2 | None | - | ||
| 1 Piece(s) | 31 Day(s) | Normally Closed | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 12 V DC | Bracket | 1.5 | 600 | Plate: PEEK, Diaphragm: EPDM | Standard Type | None | OUT side display symbol: 2 | CE-compliant product | 2 | ||
| 1 Piece(s) | 15 Day(s) | Normally Closed | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 12 V DC | Bracket, manual | 1.5 | 600 | Plate: PEEK, Diaphragm: EPDM | Standard Type | None | OUT side display symbol: 2 | CE-compliant product | 2 | ||
| 1 Piece(s) | 15 Day(s) | Normally Closed | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 12 V DC | Bracket | 1.5 | 1,000 | Plate: PEEK, Diaphragm: FKM | Standard Type | None | OUT side display symbol: 2 | Not compliant with CE | 2 | ||
| 1 Piece(s) | 31 Day(s) | Normally Closed | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 24 V DC | Bracket | Inrush: 2.5 / Holding: 1 | 600 | Plate: PEEK / Diaphragm: EPDM | With power-saving circuit | None | OUT side indicator symbol: 2 | None | - | ||
| 1 Piece(s) | 15 Day(s) | Normally Closed | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | - | None | Inrush: 2.5, Holding: 1 | 1,000 | Plate: PEEK, Diaphragm: Kalrez (R) | With power-saving circuit | None | OUT side display symbol: 2 | CE-compliant product | 2 | ||
| 1 Piece(s) | 15 Day(s) | Normally Closed | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 12 V DC | Bracket | Inrush: 2.5, Holding: 1 | 600 | Plate: PEEK, Diaphragm: Kalrez (R) | With power-saving circuit | None | OUT side display symbol: 2 | CE-compliant product | 2 | ||
| 1 Piece(s) | Quote | Normally Open | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 24 V DC | None | 1.5 | 300 | Plate: PEEK / Diaphragm: EPDM | Standard Type | None | OUT side indicator symbol: 2 | None | - | ||
| 1 Piece(s) | 31 Day(s) | Normally Open | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 24 V DC | Bracket | 1.5 | 300 | Plate: PEEK / Diaphragm: EPDM | Standard Type | None | OUT side indicator symbol: 2 | None | - | ||
| 1 Piece(s) | 31 Day(s) | Normally Open | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 24 V DC | Bracket, manual | 1.5 | 300 | Plate: PEEK / Diaphragm: EPDM | Standard Type | None | OUT side indicator symbol: 2 | CE compliant | - | ||
| 1 Piece(s) | 15 Day(s) | Normally Open | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | - | None | 1.5 | 600 | Plate: PEEK, Diaphragm: Kalrez (R) | Standard Type | None | OUT side display symbol: 2 | CE-compliant product | 2 | ||
| 1 Piece(s) | 15 Day(s) | Normally Open | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | - | None | Inrush: 2.5, Holding: 1 | 300 | Plate: PEEK, Diaphragm: FKM | With power-saving circuit | None | OUT side display symbol: 2 | Not compliant with CE | 2 | ||
| 1 Piece(s) | 31 Day(s) | Universal | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 24 V DC | None | 1.5 | 300 | Plate: PEEK / Diaphragm: EPDM | Standard Type | None | - | None | - | ||
| 1 Piece(s) | 31 Day(s) | Universal | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 24 V DC | Bracket | 1.5 | 300 | Plate: PEEK / Diaphragm: EPDM | Standard Type | None | - | None | - | ||
| 1 Piece(s) | 15 Day(s) | Universal | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | - | Manual | 1.5 | 600 | Plate: PEEK, Diaphragm: EPDM | Standard Type | None | - | CE-compliant product | 3 | ||
| 1 Piece(s) | 31 Day(s) | Universal | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 24 V DC | Manual | 1.5 | 300 | Plate: PEEK / Diaphragm: EPDM | Standard Type | None | - | CE compliant | - | ||
| 1 Piece(s) | 31 Day(s) | Universal | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 24 V DC | Bracket, manual | 1.5 | 300 | Plate: PEEK / Diaphragm: EPDM | Standard Type | None | - | None | - | ||
| 1 Piece(s) | 31 Day(s) | Universal | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 24 V DC | None | 1.5 | 300 | Plate: PEEK / Diaphragm: EPDM | Standard Type | None | - | CE compliant | - | ||
| 1 Piece(s) | 20 Day(s) | Universal | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 24 V DC | None | 1.5 | 300 | Plate: PEEK / Diaphragm: FKM | Standard Type | None | - | None | - | ||
| 1 Piece(s) | 31 Day(s) | Universal | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 12 V DC | None | 1.5 | 300 | Plate: PEEK / Diaphragm: EPDM | Standard Type | None | - | None | - | ||
| 1 Piece(s) | 15 Day(s) | Universal | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 12 V DC | Bracket, manual | 1.5 | 600 | Plate: PEEK, Diaphragm: EPDM | Standard Type | None | - | CE-compliant product | 3 | ||
| 1 Piece(s) | 15 Day(s) | Universal | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 12 V DC | Bracket | 1.5 | 1,000 | Plate: PEEK, Diaphragm: FKM | Standard Type | None | - | Not compliant with CE | 3 | ||
| 1 Piece(s) | 31 Day(s) | Universal | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 12 V DC | Manual | 1.5 | 300 | Plate: PEEK / Diaphragm: FKM | Standard Type | None | - | None | - | ||
| 1 Piece(s) | 15 Day(s) | Universal | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 12 V DC | None | 1.5 | 600 | Plate: PEEK, Diaphragm: FKM | Standard Type | None | - | Not compliant with CE | 3 | ||
| 1 Piece(s) | 15 Day(s) | Universal | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | - | Bracket | Inrush: 2.5, Holding: 1 | 600 | Plate: PEEK, Diaphragm: EPDM | With power-saving circuit | None | - | Not compliant with CE | 3 | ||
| 1 Piece(s) | 15 Day(s) | Universal | Tube Connection | - | ø2.8 | 1.4 | Body Ported Type | 12 V DC | None | Inrush: 2.5, Holding: 1 | 300 | Plate: PEEK, Diaphragm: Kalrez (R) | With power-saving circuit | None | - | Not compliant with CE | 3 |
Loading...
Basic Information
| Type | Electromagnetic Type | Applicable Fluid | Air / Water / Chemical | Operating Environment | Standard |
|---|---|---|---|---|---|
| Driving Type | Linear Motion Type | Operating Temperature Range(°C) | 0::50 | Body Material | Resin |
| Insulation Class | B |
Specification/Dimensions
-
Switching Type
- Normally Closed
- Normally Open
- Universal
-
Plumbing Thread Nominal
-
Tube Dia.
- ø2.8
-
Orifice Dia.(Ø)
-
Pipe opening type (details)
- Base Mounted Type
- Body Ported Type
-
Voltage
- 12 V DC
- 24 V DC
-
Option
- Bracket
- Bracket, manual
- Manual
- None
-
Power consumption(W)
- 1.5
- Inrush: 2.5 / Holding: 1
- Inrush: 2.5, Holding: 1
-
Lead wire length(mm)
- 1,000
- 300
- 600
-
Liquid-contacting parts material
- Plate: PEEK / Diaphragm: EPDM
- Plate: PEEK / Diaphragm: FKM
- Plate: PEEK / Diaphragm: Kalrez
- Plate: PEEK, Diaphragm: EPDM
- Plate: PEEK, Diaphragm: FKM
- Plate: PEEK, Diaphragm: Kalrez (R)
- Plate: PFA / Diaphragm: EPDM
- Plate: PFA / Diaphragm: FKM
- Plate: PFA / Diaphragm: Kalrez
- Plate: PFA, Diaphragm: Kalrez (R)
-
Functions
-
Subplate specifications
-
Valve type
-
CE compliant
- CE-compliant product
- CE compliant
- None
- Not compliant with CE
-
Number of ports
- 2
- 3
-
type
- LVM102R
- LVM105R
- LVM10R1
- LVM10R2
- LVM10R3
- LVM10R4
- LVM10R6
- LVM11
-
Connection Type
- M
- Tube Connection
- Others
Days to Ship
-
- All
- 15 Day(s) or Less
- 20 Day(s) or Less
- 31 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy