(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Compact Vacuum Regulator ITV0090/0091 Series
Vacuum regulator with built-in one-touch tube fittings.
[Features]
· Stepless control of air pressure proportional to an electrical signal.
· ITV1000, 2000 and 3000 Series are compatible with various input specifications including serial communications.
· Compact and lightweight (integrated communications).
· Straight and right angle types available.
· With error indication LED.
· Flat bracket and L-bracket types available.
(i)Caution
- Refer to the manufacturer's catalog for specifications and material details.
- The product images may be representative images only. Refer to the manufacturer's catalog for shape details.
Part Number
Configured Part Number is shown.
Compact Vacuum Regulator ITV009□ Series Specifications
Compact Vacuum Regulator ITV009□ Series external appearance
Specifications
| Model | ITV009□ | ||
|---|---|---|---|
| Minimum Supply Pressure | Set pressure -1 kPa | ||
| Maximum Supply Pressure | -101 kPa | ||
| Set Pressure Range | -1 to -100 kPa | ||
| Power Supply | Voltage | 24 V DC ±10%, 12 to 15 V DC | |
| Current Consumption | Power supply voltage 24 V DC type: 0.12 A or less Power supply voltage 12 to 15 V DC type: 0.18 A or less | ||
| Input Signal | Voltage Type | 0 to 5 V DC, 0 to 10 V DC | |
| Current Type | 4 to 20 mA DC, 0 to 20 mA DC (sink type) | ||
| Input Impedance | Voltage Type | Approx. 10 k Ω | |
| Current Type | Approx. 250 Ω | ||
| Output Signal Note 4: | Analog Output | 1 to 5 V DC (output impedance: approx. 1 kΩ) Output accuracy ±6% F.S. or less | |
| Linearity | ±1% F.S. or less | ||
| Hysteresis | 0.5% F.S. or less | ||
| Repeatability | ±0.5% F.S. or less | ||
| Sensitivity | 0.2% F.S. or less | ||
| Temperature Characteristics | ±0.12% F.S. / °C or less | ||
| Operating Temperature Range | 0 to 50°C (no condensation) | ||
| Enclosure | IP65 equivalent * | ||
| Connection Type | Built-in one-touch fittings | ||
| Connection Size | For Single Unit | Metric Size | [1], [2], [3]: ø4 mm |
| Inch Size | [1], [2], [3]: ø5/32" | ||
| Manifold | Metric Size | [1], [3]: ø6 mm, [2]: ø4 mm | |
| Inch Size | [1], [3]: ø1/4", [2]: ø5/32" | ||
| Weight Note 1: | 100 g or less (without options) | ||
Note 1: Indicates the weight of a single unit.
For IITV00-n,
Total weight (g) ≤ number of stations (n) × 100 + 130 (weight of end block A and B assemblies) + DIN rail weight (g).
Note 2: When there is a downstream flow consumption, the pressure may become unstable depending on the tubing conditions.
Note 3: While the power is on, the solenoid valve may make noise when operating. This noise is normal and does not indicate a fault.
Note 4: When measuring ITV analog output from 1 to 5 V DC, if the load impedance is less than 100 kΩ, the analog monitor output accuracy of ±6% F.S. or less may not be achievable. If an accuracy within ±6% is required, contact the manufacturer for further assistance. Output pressure remains unaffected.
*When using under conditions equivalent to IP65, connect the fitting or tube to the breathing hole prior to use.
(Refer to the manufacturer's catalog for details.)
Operating Principles
When the input signal rises, the vacuum pressure solenoid valve (1) turns ON. Due to this, part of the vacuum pressure (VAC.) supply passes through the vacuum pressure solenoid valve (1) and becomes vacuum pressure. This vacuum pressure feeds back to the control circuit (4) via the pressure sensor (3). Here, pressure corrections continue through alternate operation of the vacuum pressure solenoid valve and atmospheric pressure solenoid valve until the vacuum pressure becomes proportional to the input signal, thus supplying vacuum pressure that is consistently proportional to the input signal.
Operating principle drawing
Block diagram
Drawing
(Unit: mm)
Single unit dimensional drawing 1
Single unit dimensional drawing 2
Single unit dimensional drawing 3
Single unit dimensional drawing 4
Port Positions
| No. | [1] | [2] | [3] |
|---|---|---|---|
| ITV009□ | VAC | OUT | ATM |
Note: When using under conditions equivalent to IP65, connect the fitting or tube to the breathing hole prior to use. (Refer to the manufacturer's catalog for details.)
Single unit for manifold dimensional drawing
- When using under conditions equivalent to IP65, connect the fitting or tube to the breathing hole prior to use. (Refer to the manufacturer's catalog for details.)
- *Refer to the manufacturer's catalog for cable connector dimensions.
Linearity, Hysteresis
Linearity and hysteresis graph
Repeatability
Repeatability graph (at 50% of signal input)
Notes
- *Refer to the manufacturer's catalog for product information not detailed above.
- *Product images are representative images only.
| Part Number | Minimum order quantity | Volume Discount | Days to Ship | Supply Side, Connecting Tube Diameter | Control Side, Connecting Tube Diameter | Input Signal | Piping specifications | Cable connector | Bracket | Power supply voltage |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 4-20mA | For Single Unit | Right angle type 2 m | Flat-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 4-20mA | For Single Unit | Without cable connector | Flat-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 4-20mA | For Single Unit | Straight type 3 m | Flat-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 4-20mA | For Single Unit | Straight type 3 m | L-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 4-20mA | For Single Unit | Right angle type 2 m | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø6 | DC 4-20mA | For manifolds | Right angle type 2 m | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø6 | DC 4-20mA | For manifolds | Without cable connector | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 4-20mA | For Single Unit | Without cable connector | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 4-20mA | For Single Unit | Straight type 3 m | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | ___ | ___ | DC 4-20mA | For Single Unit | Straight type 3 m | Flat-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | ___ | ___ | DC 4-20mA | For Single Unit | Straight type 3 m | L-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | ___ | _ | DC 4-20mA | For manifolds | Right angle type 2 m | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | ___ | ___ | DC 4-20mA | For Single Unit | Without cable connector | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-20mA | For Single Unit | Right angle type 2 m | Flat-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-20mA | For Single Unit | Right angle type 2 m | L-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-20mA | For Single Unit | Without cable connector | L-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-20mA | For Single Unit | Straight type 3 m | L-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-20mA | For Single Unit | Right angle type 2 m | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-5V | For Single Unit | Right angle type 2 m | Flat-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-5V | For Single Unit | Straight type 3 m | Flat-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-5V | For Single Unit | Right angle type 2 m | L-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-5V | For Single Unit | Straight type 3 m | L-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-5V | For Single Unit | Right angle type 2 m | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø6 | DC 0-5V | For manifolds | Right angle type 2 m | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø6 | DC 0-5V | For manifolds | Straight type 3 m | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-5V | For Single Unit | Without cable connector | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-5V | For Single Unit | Straight type 3 m | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | ___ | ___ | DC 0-5V | For Single Unit | Right angle type 2 m | Flat-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | ___ | ___ | DC 0-5V | For Single Unit | Right angle type 2 m | L-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | ___ | ___ | DC 0-5V | For Single Unit | Right angle type 2 m | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | ___ | ___ | DC 0-5V | For Single Unit | Without cable connector | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | ___ | ___ | DC 0-5V | For Single Unit | Straight type 3 m | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-10V | For Single Unit | Right angle type 2 m | Flat-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-10V | For Single Unit | Without cable connector | Flat-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-10V | For Single Unit | Straight type 3 m | Flat-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-10V | For Single Unit | Right angle type 2 m | L-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-10V | For Single Unit | Without cable connector | L-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-10V | For Single Unit | Straight type 3 m | L-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-10V | For Single Unit | Right angle type 2 m | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø6 | DC 0-10V | For manifolds | Right angle type 2 m | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø6 | DC 0-10V | For manifolds | Straight type 3 m | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-10V | For Single Unit | Without cable connector | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-10V | For Single Unit | Straight type 3 m | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | ___ | ___ | DC 0-10V | For Single Unit | Right angle type 2 m | Flat-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | ___ | ___ | DC 0-10V | For Single Unit | Without cable connector | Flat-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | ___ | ___ | DC 0-10V | For Single Unit | Right angle type 2 m | L-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | ___ | ___ | DC 0-10V | For Single Unit | Straight type 3 m | L-bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | ___ | _ | DC 0-10V | For manifolds | Right angle type 2 m | Without bracket | 24 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 4-20mA | For Single Unit | Right angle type 2 m | Without bracket | 12 to 15 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-5V | For Single Unit | Right angle type 2 m | Flat-bracket | 12 to 15 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-5V | For Single Unit | Without cable connector | Flat-bracket | 12 to 15 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-5V | For Single Unit | Straight type 3 m | Flat-bracket | 12 to 15 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-5V | For Single Unit | Right angle type 2 m | L-bracket | 12 to 15 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-5V | For Single Unit | Straight type 3 m | L-bracket | 12 to 15 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-5V | For Single Unit | Right angle type 2 m | Without bracket | 12 to 15 V DC | ||
| 1 Piece(s) | 31 Day(s) | ___ | ___ | DC 0-5V | For Single Unit | Right angle type 2 m | Flat-bracket | 12 to 15 V DC | ||
| 1 Piece(s) | 31 Day(s) | ___ | ___ | DC 0-5V | For Single Unit | Straight type 3 m | Flat-bracket | 12 to 15 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-10V | For Single Unit | Right angle type 2 m | Flat-bracket | 12 to 15 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-10V | For Single Unit | Straight type 3 m | Flat-bracket | 12 to 15 V DC | ||
| 1 Piece(s) | 31 Day(s) | Ø4 | Ø4 | DC 0-10V | For Single Unit | Right angle type 2 m | L-bracket | 12 to 15 V DC |
Loading...
Basic Information
| Type | Electronic Electropneumatic Regulator | Control Method | Internal Pilot | Shape | Standard |
|---|---|---|---|---|---|
| Supply Side, Connection Type | One-Touch Plumbing | Control Side, Connection Type | One-Touch Plumbing | Set Pressure Range(kPa) | -1::-100 |
Specification/Dimensions
-
Supply Side, Connecting Tube Diameter
- Ø4
- ___
-
Control Side, Connecting Tube Diameter
- Ø4
- Ø6
- _
- ___
-
Input Signal
- DC 0-5V
- DC 0-10V
- DC 0-20mA
- DC 4-20mA
-
Piping specifications
- For Single Unit
- For manifolds
-
Cable connector
- Right angle type 2 m
- Straight type 3 m
- Without cable connector
-
Bracket
- Flat-bracket
- L-bracket
- Without bracket
-
Power supply voltage
- 12 to 15 V DC
- 24 V DC
-
type
- ITV0090
- ITV0091
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 31 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy