• Due to the typhoon in Japan, large-scale blackout have occurred in Narita city where Misumi Shipping center is located, and the recovery is being delayed. (Newspaper article https://the-japan-news.com/news/article/0005997110 source: The Japan News) Because of the above reason, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding.

Refrigerated Air Dryer Standard Temperature Air Inlet IDFB□E Series

Refrigerated Air Dryer Standard Temperature Air Inlet IDFB□E Series

Refrigerated air dryer that protects pneumatic equipment from moisture.
[Features]
· Removes the vapor from the moist compressed air delivered by the compressor and prevents it from causing the pneumatic equipment to fail.
· Improved corrosion resistance with the use of stainless-steel heat exchanger.
· Size: 22E, 37E, 55E, 75E.

(i)Caution

  • ■ SMC Product Line
    Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.

    ■ Products Planned for Online Release
    Air cylinder-related product pages will be released on this site on an ad-hoc basis.
    CQ2/MG types, etc., are already available.
    *Vacuum equipment, FRLs, solenoid valves, etc., will also be released on dedicated pages on this site on an ad-hoc basis.
    *The information above is correct as of December 2018.
  • See catalog for specification details.
  • Product images may be representative images. Refer to the manufacturer's catalog for shape details.

PDF

Part Number

Configured Part Number is shown.

Part Number
IDFB55E-46N-V
IDFB75E-46N
IDFB75E-46N-L
IDFB75E-46N-V
Part NumberVolume DiscountDays to ShipAir Inlet Flow
(l/min)
Standard size Auto drain
14 Day(s) 6,400 / 7,300 / 8,40055EWith a timer-controlled solenoid valve type auto drain
14 Day(s) 8,500 / 10,000 / 11,50075ENone
14 Day(s) 8,500 / 10,000 / 11,50075EWith heavy-duty auto drain
14 Day(s) 8,500 / 10,000 / 11,50075EWith a timer-controlled solenoid valve type auto drain

Loading...

  1. 1

Basic Information

Type Dryer Method Refrigerating type (air-cooling specification) Shape Standard
Air Inlet Flow Rate [Distinction](l/min) More than 5000 Outlet Open Air Pressure Dew-point(℃) 10 / 7.2 / 2.8 Supply Side, Connection Type NPT
Inlet Air Temperature(℃) 37.8 Inlet Air Pressure(MPa) 0.7 Supply Side, Plumbing Thread Nominal 2
Control Side, Connection Type NPT Control Side, Plumbing Thread Nominal 2 Power Supply Voltage Three-phase 460 V AC (60 Hz)
For medium pressure air None Short-circuit Breaker None Operation, Terminal block for abnormal signal takeout None

Additional Products in this Category

Tech Support