(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping
63,000 Stock items for Same Day Shipping
9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama
63,000 Item Stok untuk Pengiriman di Hari yang Sama
021-8984-0008
021-8984-0008
8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)
8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
Order/Quote
?
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 30/6/2024 sampai dengan 5:00 pada tanggal 1/7/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 30/6/2024 to 5:00 (WIB) 1/7/2024. We apologize for the inconvenience. - Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Air Slide Table, Compatible With Rechargeable Battery 25A-MXQ Series (Part Numbers)
[Features]
・ In order to reduce product defects in the rechargeable battery manufacturing process, materials containing copper (Cu) and zinc (Zn) as the main components are not used.
* Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
・ Nickel electroplating with copper base and zinc plating are not used.
* Electroless nickel plating is used.
・ Low dew point compatible grease used, it can be used at -70°C. Performance improvement in low dew point environment.
(i)Caution
- Refer to the manufacturer's catalog for specification and material details.
- Product images may be representative images only. Please refer to the manufacturer's catalog for shape details.
Japanese Only
Please refer to the table below for details about lead wire / connector specifications.
| Part Number | Minimum order quantity | Volume Discount | Days to Ship | Cylinder I.D. (Ø) | Type | Stroke (mm) | Table Size: Length L (mm) | Max. Load Mass (Horizontal Mounting) (kg) | Table Material | Table Size: Width W (mm) | Guide Type | Environment | Table Size: Height H (mm) | Max. Load Mass (kg) | Table Surface Treatment | Operating Pressure (MPa) | Table Parallelism (µm) | Piping Format | Port Screw Type | Adjuster Option | Function Option | Specifications | Auto Switches | Lead Wire Length (m) | Lead Wire Connector | The number of the switches | Made-to-order | Type | Applicable inner diameter of cylinder (ø) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Dual-end adjuster | Standard | - | M9NW | 0.5 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Forward-end adjuster | Standard | - | Without auto switch (built-in magnet) | None | None | None | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Forward-end adjuster | Standard | - | M9B | 0.5 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Forward-end adjuster | Standard | - | M9B | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Forward-end adjuster | Standard | - | M9BV | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Forward-end adjuster | Standard | - | M9N | 0.5 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Forward-end adjuster | Standard | - | M9N | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Forward-end adjuster | Standard | - | M9NW | 0.5 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Forward-end adjuster + reverse-end absorber | Standard | - | Without auto switch (built-in magnet) | None | None | None | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Forward-end adjuster + reverse-end absorber | Standard | - | M9BW | 0.5 | M12 4‑pin | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Reverse-end adjuster | Standard | - | Without auto switch (built-in magnet) | None | None | None | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Reverse-end adjuster | Standard | - | M9BW | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Reverse-end adjuster | Standard | - | M9N | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Reverse-end adjuster | Standard | - | M9NWV | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Dual-end absorber | Standard | - | Without auto switch (built-in magnet) | None | None | None | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Dual-end absorber | Standard | - | M9B | 0.5 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Dual-end absorber | Standard | - | M9N | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Dual-end absorber | Standard | - | M9NW | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Forward-end absorber | Standard | - | Without auto switch (built-in magnet) | None | None | None | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Forward-end absorber | Standard | - | M9N | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Forward-end absorber + reverse-end adjuster | Standard | - | M9B | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Forward-end absorber + reverse-end adjuster | Standard | - | M9N | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Reverse-end absorber | Standard | - | Without auto switch (built-in magnet) | None | None | None | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Reverse-end absorber | Standard | - | M9B | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Dual-end metal stoppers | Standard | - | M9B | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Dual-end metal stoppers | Standard | - | M9N | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Dual-end metal stoppers | Standard | - | M9PV | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Forward-end metal stopper | Standard | - | Without auto switch (built-in magnet) | None | None | None | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Forward-end metal stopper | Standard | - | A90 | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Forward-end metal stopper | Standard | - | M9B | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Forward-end metal stopper | Standard | - | M9N | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Forward-end metal stopper | Standard | - | M9P | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Extension end metal stopper + retraction end adjuster | Standard | - | M9BW | 0.5 | M12 4‑pin | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Extension end metal stopper + retraction end absorber | Standard | - | Without auto switch (built-in magnet) | None | None | None | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Extension end metal stopper + retraction end absorber | Standard | - | M9BW | 0.5 | M12 4‑pin | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Retraction end metal stopper | Standard | - | Without auto switch (built-in magnet) | None | None | None | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 30 | 85 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 35 | Standard type | M screw | Retraction end metal stopper | Standard | - | A90 | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | No adjuster | Standard | - | Without auto switch (built-in magnet) | None | None | None | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | No adjuster | Standard | - | M9B | 0.5 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | No adjuster | Standard | - | M9B | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | No adjuster | Standard | - | M9B | 3 | None | 1 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | No adjuster | Standard | - | M9BW | 0.5 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | No adjuster | Standard | - | M9BW | 0.5 | M12 4‑pin | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | No adjuster | Standard | - | M9BWV | 0.5 | M12 4‑pin | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | No adjuster | Standard | - | M9N | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | No adjuster | Standard | - | M9NWV | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Dual-end adjuster | Standard | - | Without auto switch (built-in magnet) | None | None | None | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Dual-end adjuster | Standard | - | M9B | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Dual-end adjuster | Standard | - | M9N | 0.5 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Dual-end adjuster | Standard | - | M9N | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Forward-end adjuster | Standard | - | Without auto switch (built-in magnet) | None | None | None | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Forward-end adjuster | Standard | - | M9B | 0.5 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Forward-end adjuster | Standard | - | M9B | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Forward-end adjuster | Standard | - | M9BW | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Forward-end adjuster | Standard | - | M9N | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Forward-end adjuster | Standard | - | M9N | 1 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Reverse-end adjuster | Standard | - | Without auto switch (built-in magnet) | None | None | None | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Reverse-end adjuster | Standard | - | M9B | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Dual-end absorber | Standard | - | M9N | 0.5 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Dual-end absorber | Standard | - | M9N | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Dual-end absorber | Standard | - | M9NW | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Forward-end absorber | Standard | - | Without auto switch (built-in magnet) | None | None | None | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Forward-end absorber | Standard | - | M9B | 0.5 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Forward-end absorber | Standard | - | M9N | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Dual-end metal stoppers | Standard | - | Without auto switch (built-in magnet) | None | None | None | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Dual-end metal stoppers | Standard | - | M9B | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Forward-end metal stopper | Standard | - | Without auto switch (built-in magnet) | None | None | None | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Forward-end metal stopper | Standard | - | M9B | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 40 | 102 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 40 | Standard type | M screw | Extension end metal stopper + retraction end adjuster | Standard | - | M9NWV | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | No adjuster | Standard | - | Without auto switch (built-in magnet) | None | None | None | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | No adjuster | Standard | - | M9B | 0.5 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | No adjuster | Standard | - | M9B | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | No adjuster | Standard | - | M9B | 1 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | No adjuster | Standard | - | M9BV | 0.5 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | No adjuster | Standard | - | M9BW | 0.5 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | No adjuster | Standard | - | M9N | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | No adjuster | Standard | - | M9N | 1 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | No adjuster | Standard | - | M9NW | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | Dual-end adjuster | Standard | - | M9B | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | Dual-end adjuster | Standard | - | M9N | 0.5 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | Dual-end adjuster | Standard | - | M9N | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | Dual-end adjuster | Standard | - | M9NW | 0.5 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | Forward-end adjuster | Standard | - | Without auto switch (built-in magnet) | None | None | None | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | Forward-end adjuster | Standard | - | M9B | 0.5 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | Forward-end adjuster | Standard | - | M9B | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | Forward-end adjuster | Standard | - | M9N | 3 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | Forward-end adjuster | Standard | - | M9NW | 0.5 | None | 2 pcs. | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | Reverse-end adjuster | Standard | - | Without auto switch (built-in magnet) | None | None | None | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | Dual-end absorber | Standard | - | Without auto switch (built-in magnet) | None | None | None | None | Cylinder | - | ||
| 1 Piece(s) | 15 Day(s) | 12 | L-Shaped Table Type | 50 | 112 | 1~4.9 | [Aluminum] Aluminum | 46 | [Rolling Guide] Linear guide type | General Purpose | 30 | 2 | Electroless Nickel Plating | 0.15 to 0.7 | 45 | Standard type | M screw | Dual-end absorber | Standard | - | A90 | 3 | None | 2 pcs. | None | Cylinder | - |
Loading...
Specification/Dimensions
-
Cylinder I.D.(Ø)
-
Type
- L-Shaped Table Type
- Others
-
Stroke(mm)
-
Table Size: Length L(mm)
-
Max. Load Mass (Horizontal Mounting)(kg)
-
Table Material
- Aluminum
- Aluminum
-
Table Size: Width W(mm)
-
Guide Type
- Rolling Guide
- Rolling Guide
-
Environment
- General Purpose
-
Table Size: Height H(mm)
-
Max. Load Mass(kg)
-
Table Surface Treatment
- Electroless Nickel Plating
-
Operating Pressure(MPa)
-
Table Parallelism(µm)
-
Piping Format
- Standard type
- Symmetrical type
-
Port Screw Type
-
Adjuster Option
- Dual-end absorber
- Dual-end adjuster
- Dual-end metal stoppers
- Extension end absorber + retraction end metal stopper
- Extension end adjuster + retraction end metal stopper
- Extension end metal stopper + retraction end absorber
- Extension end metal stopper + retraction end adjuster
- Extension end shock absorber
- Forward-end absorber
- Forward-end absorber + reverse-end adjuster
- Forward-end adjuster
- Forward-end adjuster + reverse-end absorber
- Forward-end metal stopper
- Forward-end rubber stopper
- No adjuster
- Retraction end metal stopper
- Retraction end shock absorber
- Reverse-end absorber
- Reverse-end adjuster
- Reverse-end rubber stopper
-
Function Option
- Standard
-
Specifications
- Standard type
- Symmetrical type
-
Auto Switches
-
Lead Wire Length(m)
- 0.5
- 1
- 3
- 5
- None
-
Lead Wire Connector
- M12 4‑pin
- None
-
The number of the switches
- 1 pcs.
- 2 pcs.
- 3 pcs.
- None
-
Made-to-order
- Air Slide Table with improved corrosion resistance
- None
-
Type
- Cylinder
- Stroke Adjuster
-
Applicable inner diameter of cylinder(ø)
- 6
- 8
- 12
- 16
- 20
- 25
-
type
- 25A-MXQ
- 25A-MXQ12
- 25A-MXQ16
- 25A-MXQ20
- 25A-MXQ25
- 25A-MXQ6
- 25A-MXQ8
Days to Ship
-
- All
- 15 Day(s) or Less
- 20 Day(s) or Less
- 31 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy