Loctite UV (Ultraviolet) Fiber Irradiation Device
Part Number: HM-0110

[Features]
• A UV fiber device designed to make UV and visible light curing type adhesives cure perfectly.
• Lamp replacement during maintenance is very easy.
• Can be used for both the built-in automatic machine type and the manual type.
・ Light intensity can be adjusted freely from 0 to 100%.
• Can be used freely with any type of power source worldwide.
• Has a program to deal with momentary power failure.
[Application]
• For curing UV / VIS (ultraviolet ray / visible light curing) adhesives.

Specifications of HM-0110

• Color

  [Other] Other

• Details Type

  Light Guide

• Power Consumption(VA)

  -

• Overall Length(mm)

  1000

• Emission diameter(mm)

  5.0

• Length(mm)

  -

• Width(mm)

  -

• Height(mm)

  -

• Number of Branches

  1

• Trusco Code

  464-0233

• Mass(g)

  2500

• Features

  UV fiber device set to optimally cure UV and visible light curing type adhesive. Lamp replacement during maintenance is very easy. Can be integrated into automatic machine or used in manual operation. Light intensity can be freely adjusted from 0 to 100%. Can be charged freely worldwide. Equipped with program for sudden power shortages.

• Application

  For hardening of UV/VIS (ultraviolet ray/visible ray hardening) adhesive.

• Specifications, light guide connection port

  Surface of operation panel

• Specifications, lamp replacement port

  Back

• Specifications, radiation wavelength

  (250 nm Belt Reinforcing Type) 240-400 nm

• Specifications, input voltage (AC)

  100-240 V, Single Phase 47-63 Hz

Please check the type/dimensions/specifications of the part HM-0110 in the Loctite UV (Ultraviolet) Fiber Irradiation Device series.