• Due to the typhoon(Hagibis) in Japan, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding

CoroMill Plura HD, Carbide Solid End Mill (Square center-cut, Hardness: 48 HRC or less)

CoroMill Plura HD, Carbide Solid End Mill (Square center-cut, Hardness: 48 HRC or less)

[Features]
· Square, Center Cut
· Twice the cutting depth that was conventionally possible
· Ideal for everything from shoulder cutting to full grooving.
· With reinforced edge lines, assures long product life even with intense machining.

PDF

Part Number

Configured Part Number is shown.

 
Part Number
2P342-0200-PA-1730
2P342-0300-PA-1730
2P342-0400-PA-1730
2P342-0500-PA-1730
2P342-0600-PA-1730
2P342-0800-PA-1730
2P342-1000-PA-1730
2P342-1200-PA-1730
2P342-1400-PA-1730
2P342-1600-PA-1730
2P342-2000-PA-1730
2P342-2500-PA-1730
Part NumberVolume DiscountDays to ShipShank diameter (d)
(mm)
Overall Length (L)
(mm)
Usable length
(mm)
Maximum Cutting
(mm)
Corner Chamfer Corner Chamfer Width Maximum Ramping Angle
(°)
13 Day(s) or more 65755.0045°0.10mm7
13 Day(s) or more 6577.00745°0.10mm7
13 Day(s) or more 6579.009.0045°0.10mm7
17 Day(s) or more 65711.001145°0.10mm7
13 Day(s) or more 65713.001345°0.10mm7
13 Day(s) or more 86318.0018.0045°0.10mm7
17 Day(s) or more 107222.002245°0.15mm7
13 Day(s) or more 128326.002645°0.15mm7
13 Day(s) or more 148330.0030.0045°0.15mm7
13 Day(s) or more 169234.0034.0045°0.25mm7
13 Day(s) or more 2010442.0042.0045°0.25mm7
13 Day(s) or more 2512152.0052.0045°0.25mm7

Loading...

  1. 1

Basic Information

work material general steel / Cast Iron Number of flutes(sheet) 4 Type Square
Torsion Angle (θ) Standard torsion (30-40°) Shank diameter tolerance h6

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)