Work Benches（Assembly / Completion：Finished product）

• 

  Small MAWARU

  OSAKA TAIYU

  Beautifully plated, this small turntable can be used in factories, stores, offices, etc.
  [Features]
  ·309 mm outer diameter for 300 kg and 450 mm outer diameter for 500 kg
  ·MR-30 and MR-45P are covered with a top plate in the center, and can handle small and heavy objects.
  [Applications]
  ·Convenient for viewing the back of the product by rotating it during assembly and inspection processes.
  ·It is also convenient when pulling out the size cut by placing the electric wire drum on it.

  Days to Ship:	12 Day(s) or more

• 

  Movable Heavy Work Bench with Front Panel White Board Average Load (kg) 3000

  TRUSCO NAKAYAMA

  [Features]
  · The left side is the punching panel and the right side is the whiteboard.
  · Tools, etc. can be hung from the punching panel using hooks, etc.

  Days to Ship:	Quote

• 

  Work Bench with Handle for Height Adjustment Melamine Resin Countertop Uniform Load 300 kg

  TRUSCO NAKAYAMA

  Lightweight elevator-style workbench with height which can be set between 700 to 900 mm.
  [Features]
  · Workbench developed to make lifting easy.
  · Lifting devices built into all 4 legs allow it to be set at a desired height (700-900 mm).
  · The position of the lower horizontal crossbar can be changed in 3 ways depending on how it is used.
  · The handle knob is a folding type, so it does not interfere with the work.
  · Lighter than hydraulic type, no need for concern about oil leakage.
  [Applications]
  · For workplaces with a lot of assembly work for large or small items.
  · Ideal for work in research and experimental laboratories, schools, and offices.

  Days to Ship:	Quote

• 

  Stainless Steel Workbench, Drainboard Type, SUS430, Height 800 mm HT/KT

  AZUMA

  A stainless steel work bench that comes with a drainboard usable for storage.
  [Features]
  · A bolt fixed type that enables leg cut and drainboard shelf position upward and downward adjustment according to the installation location.
  · Bottom shelf: Drainboard shelf (mounting position can be changed up or down), Top board: Flat board.
  · Nylon resin adjuster (+30 mm), practical load resistance is 80 kg.
  [Applications]
  · Factories and laboratories. As a work desk, gas range table or table. Fully assembled at shipment.

  Days to Ship:	Quote

• 

  Stainless Steel Workbench, H-Type Frame, with Casters, SUS430 Uniform Load (kg) 120

  AZUMA

  Because an H-type frame is used, a chair can fit in front.
  Can also be used as a meeting table.

  Days to Ship:	Quote

• 

  Movable Heavy Work Bench with 3 Cabinets Average Load (kg) 3000

  TRUSCO NAKAYAMA

  [Features]
  · Comes with a 3-step cabinet with the same depth.
  · Cabinet can be mounted in your desired position.
  · The body is made of structural steel pipe and rolled steel, and all connection parts have been welded.
  · Just use the pedal to lift and move workbenches.
  · The load while moving is 300 kg due to the restriction of the caster load resistance.

  Days to Ship:	Quote

• 

  Stainless Steel Workbench, 3-Way Frame Type, SUS430 Uniform Load 240 kg

  AZUMA

  A stainless steel work bench that comes with a 3-way frame.
  [Features]
  · The front foot area is open for spacious use. A chair can also be used in this space.
  · Adjuster adjustment: +30 mm.
  · Frame type: 3-way frame (mounting position can be changed up or down).
  · Top board: Flat board.
  [Applications]
  · Factories and laboratories. Fully assembled at shipment.

  Days to Ship:	Quote

• 

  Stainless Steel Work Table, H-Type Frame, Punching Panel Type, Top Plate, SUS304 Uniform Load (kg) 200

  CANYON

  [Features]
  · Uses a punching panel that maintains smooth airflow in a clean room.
  [Applications]
  · Clean rooms, bio laboratories, semiconductor factories and pharmaceutical factories.

  Days to Ship:	Quote

• 

  Heavy Duty Workbench, Basic Type, Uniform Load 3,000 kg

  TRUSCO NAKAYAMA

  Workbench with the highest load capacity.
  [Features]
  · The body is made of structural steel pipe and rolled steel, and all connection parts have been welded for excellent durability.
  · Unused tools can be stored in the lower shelf, which holds up to about 100 kg of tools.
  · Three types, consisting of easy-to-slip DAP decorative tabletop, non-slip linoleum tabletop and shock-resistant steel tabletop.
  [Applications]
  · It can be installed with many options to be used in a wide range of fields.
  · Can also be used in plants manufacturing heavy items, etc. as its uniform stationary load is 3,000 kg.

  Days to Ship:	Quote

• 

  Heavy Work Bench with Front Panel / White Board Average Load (kg) 3000

  TRUSCO NAKAYAMA

  [Features]
  · The left side is the punching panel and the right side is the whiteboard.
  · Tools, etc. can be hung from the punching panel using hooks, etc.

  Days to Ship:	Quote

• 

  Instruction Desk Average Load (kg) 100

  OSAKA SEIKAN

  [Features]
  · The top plate can be tilted at 0°, 3°, 6°, 9° and 12°.
  · Top plate has a spill stopper. (Front only)
  · Locker features see-through transparent acrylic window (W248 x H273 mm). Two metal fittings are included for use with keys and file partitions.
  · One hanger board includes 5 board hooks.
  · Ideal for improving work site operation efficiency.
  · Includes a lock (lower locker).
  · Height adjustment is possible (100 mm).

  Days to Ship:	Quote

• 

  Heavy Work Bench with 3-Shelf / 4-Shelf Cabinet Average Load (kg) 3000

  TRUSCO NAKAYAMA

  [Features]
  · Uses drawers of different depths for more efficient storage in each cabinet.
  · The body is made of structural steel pipe and rolled steel, and all connection parts have been welded for excellent durability.
  · Drawers can be installed in the desired position.

  Days to Ship:	Quote

• 

  Heavy Work Bench with 3 Face Panel Average Load (kg) 3000

  TRUSCO NAKAYAMA

  [Features]
  · Curtain plates are attached on three sides, preventing objects placed under the tabletop from falling off.

  Days to Ship:	Quote

• 

  Heavy Work Bench with 3 Face Panel / 3-Shelf / 4-Shelf Cabinet Average Load (kg) 3000

  TRUSCO NAKAYAMA

  [Features]
  · Equipped with 3-way curtain plates, 1 partition and 4 dividers are attached to each drawer of the cabinet D-3Z and D-4Z.
  · The body is made of structural steel pipe and rolled steel, and all connection parts have been welded for excellent durability.
  · Drawers can be installed in the desired position.

  Days to Ship:	Quote

• 

  Movable Heavy Work Bench Basic Type Average Load (kg) 3000

  TRUSCO NAKAYAMA

  With a simple stepping motion, the workbench can be lifted and moved.
  Uniform load (kg): 3000
  Movement load (kg): 300
  Product compliant with the Law on Promoting Green Purchasing
  Material 1 / Main body: Steel
  Material 2 / Wheel: Urethane
  Specifications: 100 mm / 2 Fixed Wheels and 2 swivel Wheels

  Days to Ship:	Quote

• 

  Movable Heavy Work Bench with 1 Drawer Average Load (kg) 3000

  TRUSCO NAKAYAMA

  [Features]
  · Has a relatively deep drawer that gives plenty of space to store and manage items.
  · Drawers can be installed in a convenient position.

  Days to Ship:	Quote

• 

  Work Desk Average Load (kg) 200

  TRUSCO NAKAYAMA

  [Features]
  · Widely used as an on-site desk.
  · Desk surface is inclined so it is easy to work while standing.
  · It has a latch mechanism that locks when closing the door.

  Days to Ship:	Quote

• 

  Aluminum Workbench Even Load (kg) 150

  TRUSCO NAKAYAMA

  [Features]
  · The foldable legs and its compact design allow it to be stored in a light van when folded.
  [Applications]
  · Work bench for worksite use.

  Days to Ship:	16 Day(s) or more

• 

  Mini Table Uniform Load 20 kg

  TRUSCO NAKAYAMA

  A lifting type mobile workbench with a stopper function that can be used for a wide range of applications.
  [Features]
  · A side table intended to be used for a wide range of tasks.
  · Can be stored in spaces as narrow as 10 cm (tools not required) as it becomes a compact size when the tabletop and legs are folded.
  · Has a stopper function that makes it possible to freely put in and remove items while the top plate is inclined without documents falling down.
  · The top plate surface material is a scratch-resistant melamine decorative board that is resistant to water and chemicals.
  [Applications]
  · As an auxiliary table for office desks, parts and tool bench when working in factories, or as a bedside table.
  · Convenient as an auxiliary desk when desk alone cannot provide enough space, such as copying work, etc.
  · As a stand for placing documents, drafts, etc. when running meetings.

  Days to Ship:	Quote

• 

  All Stainless Steel Perforated Workbench, H-Frame Type, Perforated Panel Top Plate, SUS304 Equal Load (kg) 250

  TRUSCO NAKAYAMA

  [Features]
  · The top plate has a rounded surface on which dust is unlikely to accumulate and a structure that is easy on operator stomachs.
  [Applications]
  · For research facilities, cleanrooms, etc.

  Days to Ship:	Quote

• 

  Stainless Steel Workbench, 2-Stage Drainboard Type, SUS430 Uniform Load 240 kg

  AZUMA

  A stainless steel work bench that comes with 2 storage shelves.
  [Features]
  · A bolt fixed type that enables leg cut and drainboard shelf position upward and downward adjustment according to the installation location.
  · The mid-level shelf can be moved up or down.
  [Applications]
  · As a work desk, gas range table or table, and fully assembled at shipment.

  Days to Ship:	Quote

• 

  Stainless Steel Workbench, Drainboard Type, with Drawers, SUS430 Uniform Load (kg) 240

  AZUMA

  SUS430 workbench with a slatted shelf on the bottom and 3 drawers.
  The drawer handles are made of ABS resin that is gentle on the hands.

  Days to Ship:	Quote

• 

  Stainless Steel Workbench, H-Type Frame, with Casters, SUS304 Uniform Load (kg) 150

  HONJO CHUBO

  [Features]
  · A small and lightweight work bench with stainless steel alloy casters equipped as standard on the legs.
  · Fully welded and assembled at shipment, eliminating any later concerns about loose screws, etc.

  Days to Ship:	Quote

• 

  Optional Cabinet for Heavy Weight Work Bench

  SAKAE

  Ball slide rails are used for the drawers.
  
  [Features]
  · Each drawer includes a single partition and two dividers.

  Days to Ship:	12 Day(s) or more

• 

  Ultra Heavy Work Bench KWC Type Raising and Lowering Handle Movable Type Average Load (kg) 1200

  SAKAE

  It can easily elevate with 600 kg loaded on the top plate.

  Days to Ship:	22 Day(s) or more

• 

  Mobile Working Vehicle, Uniform Load 300 kg

  SAKAE

  Large wagon with uniform load of 300 kg, which can store large tools.
  [Features]
  · Lightweight work bench with top plate, which can be easily transported. No assembly required, it is shipped out as a finished product.
  · Select from a wide range of variations for storing small tools, organizing work space, or improving work efficiency.
  · An optional pole-type frame can also be mounted. 2 casters with stoppers.
  · Internal partition plates are not included with the drawers, but they can be purchased separately in individual units (horizontal/vertical).
  [Applications]
  · Includes drawers and shelving with space for stowing objects. The shelving also includes keys for handy storage of tools.
  · Used as a machine tool auxiliary table or a competition table for companies taking part in the Technical Skills Olympics.

  Days to Ship:	12 Day(s) or more

• 

  Stainless Steel Workbench, H-Type Frame, SUS430 Uniform Load 240 kg

  AZUMA

  A stainless steel work bench constructed from an H-type frame that enables a chair to fit in front. ​
  [Features]
  · Can also be used as a meeting table.
  · The level can be adjusted (+30 mm).
  [Applications]
  · Factories and laboratories.

  Days to Ship:	Quote

• 

  Heavy Work Bench with 3 Face Panel / 3-Shelf Cabinet Average Load (kg) 3000

  TRUSCO NAKAYAMA

  With a 3-way curtain plate. 1 vertical partition board and 4 horizontal partition boards are attached per drawer stage of the cabinet D-3Z.

  Days to Ship:	Quote

• 

  Heavy Work Bench with 3 Face Panel / 4-Shelf Cabinet Average Load (kg) 3000

  TRUSCO NAKAYAMA

  With a 3-way curtain plate. 1 vertical partition board and 4 horizontal partition boards are attached per drawer stage of the cabinet D-4Z.

  Days to Ship:	Quote

• 

  Working Desk

  MECHANICS

  [Features]
  · Enables drawings to be fully opened for display in a worksite meeting at a factory, etc. and the included magnets can also be used to bring attention to points for work, etc.
  · The movable board can be changed between 3 levels according to the application.
  · The uppermost of the two drawers has a lock, which makes it very convenient for the temporary storage of important data such as CD-ROMs.

  Days to Ship:	Quote

• 

  Handle Elevator Type Lightweight Workbench with Caster, Equal Load (kg) 150, Width (mm) 900

  TRUSCO NAKAYAMA

  Easily movable in accordance with the work.

  Days to Ship:	Quote

• 

  Work Table, Folding Type Uniform Load (kg) 200

  YAMAKIN

  Even though this is a folding type, the uniform load resistance is amply strong at 200 kg
  [Features]
  · Can be folded up without using a tool.
  · Because there are no obstructions in the foot area, a wheelchair can fit in the space.

  Days to Ship:	14 Day(s) or more

• 

  Heavy Work Bench with Front Panel / White Board Linoleum Tabletop Average Load (kg) 3000

  TRUSCO NAKAYAMA

  [Features]
  · The left side is the punching panel and the right side is the whiteboard.
  · Tools, etc. can be hung from the punching panel using hooks, etc.

  Days to Ship:	Quote

• 

  Heavy Work Bench with Front Panel / White Board Steel Tabletop Average Load (kg) 3000

  TRUSCO NAKAYAMA

  [Features]
  · The left side is the punching panel and the right side is the whiteboard.
  · Tools, etc. can be hung from the punching panel using hooks, etc.

  Days to Ship:	Quote

• 

  Movable Heavy Work Bench with 1 Drawer Linoleum Tabletop Average Load (kg) 3000

  TRUSCO NAKAYAMA

  [Features]
  · Has a relatively deep drawer that gives plenty of space to store and manage items.
  · The body is made of structural steel pipe and rolled steel, and all connection parts have been welded.
  · Just use the pedal to lift and move workbenches.
  · The load while moving is 300 kg due to the restriction of the caster load resistance.
  · Drawers can be installed in the desired position.
  · Only installed if the optional drawers, cabinet, and vise are ordered at the same time. Cannot be retrofitted.

  Days to Ship:	Quote

• 

  Light Work Bench TFAE Type Average Load (kg) Width 300 (mm) 1200

  TRUSCO NAKAYAMA

  [Features]
  · The surface is a smooth, soft and glossy plastic decorated top board.

  Days to Ship:	Quote

• 

  Light Work Bench TFAE Type with Casters Average Load (kg) Width 150 (mm) 900/1200

  TRUSCO NAKAYAMA

  [Features]
  · Easily movable in accordance with the work.

  Days to Ship:	Quote

• 

  Light Work Bench TFAE Type with Adjustable Height Function Average Load (kg) 150

  TRUSCO NAKAYAMA

  [Features]
  · Adjustments can be made for the ideal height, between 650 and 950 mm for sitting work or standing work.

  Days to Ship:	Quote

Loading...