(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
This translation is a Google translation Terjemahan ini adalah terjemahan Google
Days to Ship |
|
---|
(Economy series) XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model
MISUMI
The Misumi's original fine intermediate flute length is available at a reasonable price
Special Price | |
Days to Ship: | Same day or more |
(Economy series) XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model
MISUMI
Popular sizes that support deeper side milling are available in XAL Series
Special Price | |
Days to Ship: | Same day or more |
Epoch Deep Square (PN Coating), EPDSE2□□□-□□.□-PN
MITSUBISHI HITACHI TOOL
[Notice] Improvements of the cutting edge and neck shape suppress sagging and have achieved high-precision machining. The use of PN coating enables even longer lifespan of machining.
Days to Ship: | 12 Day(s) or more |
---|
Endmill with 3 Carbide Flutes for Aluminum Alloys ALE-3DLC
KYOWA SEIKO
[Specifications]
· Shape: Square End Mill (carbide)
· Coating: DLC
· Work Materials: Aluminum [◎], Copper [◎]
[Applications] Flat Surfaces / Side Surfaces / Grooves / Plunging (Z feed) / Countersinking
Days to Ship: | 16 Day(s) or more |
---|
(Economy series) XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model
MISUMI
Stub flute length items that are ideal for grooving are available at incredibly low prices
Days to Ship: | 16 Day(s) or more |
---|
Epoch TH Power Mill (Square) EPPM4□□□TH [Alteration Supported Product]
MITSUBISHI HITACHI TOOL
[Notice] Alteration can be specified. Please select from "standard/alteration classification" of the narrowing conditions.
Carbide square end mill capable of grooving and side machining with 4 flutes.
[Features]
· The product has a long lifespan even in sharp corners since the product uses ultra-fine-grained cemented carbide with both abrasion-resistance and toughness.
Days to Ship: | 12 Day(s) or more |
---|
Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill
MISUMI
[Features]
·Alteration end mill that can specify corner chamfer size of carbide end mill in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Days to Ship: | 12 Day(s) or more |
---|
Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE
OSG
[Features]
· 2-flute end mill coated with WXL hard lubricating film coating.
Proven cutting performance on not only steel but also copper alloys.
Recommended for both wet-type and dry-type milling.
Days to Ship: | 2 Day(s) or more |
---|
AL3D-2DLC Aluminum-Only End Mill (DLC Coating)
NS TOOL
Capable of stable high efficiency machining under all conditions. Adopts a uniquely adhesive high DLC coating suited to long periods of machining
Days to Ship: | 16 Day(s) or more |
---|
Epoch TH Hard Regular Length CEPR□□□□-TH [Alteration Supported Product]
MITSUBISHI HITACHI TOOL
[Notice] Alteration can be specified. Please select from "standard / alteration category" of the narrowing conditions.
Carbide square end mill for high-speed processing of high-hardness materials.
[Features]
· Coating with a super-aluminum rich Ai-Ti-Cr-based laminate.
· "GS hard coat" improves oxidation-resistance at 1,100°C more than 3 times that of conventional products
Days to Ship: | 12 Day(s) |
---|
Carbide 3-Flute Variable Split Variable Lead End Mill 38°/41° E130HX
7 LEADERS
[Features]
· 3-flute variable split and unequal lead reduce chatter, enabling high-efficiency cutting.
· The multilayer coating uses nanoparticles
· Excellent lubricity and heat resistance.
· Suitable for a wide range of work materials from general steel to high hardness steel.
· Enables grooving (ap 0.5D to 1.0D) as is after machining in the Z axis direction (ap 0.5D to 1.0D).
Days to Ship: | 12 Day(s) or more |
---|
Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model
MISUMI
3-flute structure that's excellent in discharging chips
Days to Ship: | 16 Day(s) or more |
---|
NS TOOL
The blade length is 2x the blade diameter and the torsion angle is 30°. Capable of universal cutting from roughing to finishing
Days to Ship: | 10 Day(s) or more |
---|
Days to Ship: | 16 Day(s) or more |
---|
Epoch TH, Hard Long Flute Length CEPL□□□□-TH [Alteration Supported Product]
MITSUBISHI HITACHI TOOL
[Notice] Alteration can be specified. Please select from "standard/alteration classification" of the narrowing conditions.
Ideal for rough and medium finishing from steel to stainless steel. Cutting-resistance is low, and high efficiency machining is possible even with BT30 machines.
Days to Ship: | 12 Day(s) |
---|
MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD 25 End Mill MXH225P
NS TOOL
Supports heat-resistant alloys such as stainless steel, titanium, etc. The blade length is the same as the blade diameter and the torsion angle is 25°
Days to Ship: | 12 Day(s) or more |
---|
Epoch Panacea Square, 4-Flute HGOS4□□□-PN
MITSUBISHI HITACHI TOOL
[Features]
· PN coating with phenomenal adhesion resistance and abrasion resistance.
· Enables machining of a wide range of work materials.
Days to Ship: | 12 Day(s) |
---|
Carbide 4-Flute Variable Split Variable Lead End Mill 38°/41° E141-3.0HX
7 LEADERS
[Features]
· 3.0D blade length type.
· 4-flute variable split and unequal lead reduce chatter, enabling high-efficiency cutting.
· The multilayer coating uses nanoparticles.
· Excellent lubricity and heat resistance.
· Suitable for a wide range of work materials from general steel to high hardness steel.
· Enables groove cutting (ap 0.5D to 1.0D) as is after machining in the Z axis direction (ap 0.5D to 1.0D).
Days to Ship: | 12 Day(s) or more |
---|
Anti-Vibration Short Carbide End Mill_AE-VMS
OSG
[Features]
· DUARISE coating
· Offers excellent lubrication, wear resistance and high-temperature oxidation resistance. The composite multilayer structure helps prevent thermal cracking.
Smoothing of the coating surface improves machining surface precision.
The positive-angle flute has excellent sharpness and helps reduce cutting resistance.
A flute form that achieves both high tool rigidity and a good chip discharge performance, enabling stable machining and a reduction in burring.
Use of a variable-lead geometry and unequal divisions enables stable, high-efficiency machining.
Days to Ship: | 2 Day(s) or more |
---|
(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model
MISUMI
The Misumi's unique lineup of fine flute length is available at attractive low prices
Special Price | |
Days to Ship: | Same day or more |
XAC series carbide square end mill, 4-flute / short model
MISUMI
[Specification]
·Standard TiAlN coating
Special Price | |
Days to Ship: | Same day or more |
Carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
Excellent in general versatility, it is a 2D flute length type that can be used in a wide range of applications
Days to Ship: | 12 Day(s) or more |
---|
Carbide square end mill, 4-flute / 2D Flute Length (short) model
MISUMI
The 2D flute length type with high versatility achieves high-precision processing including grooving
Days to Ship: | 16 Day(s) or more |
---|
TSC Series Carbide Roughing End Mill for Stainless Steel Machining
MISUMI
Ideal for the medium-finishing of difficult-to-cut SUS, etc.
Days to Ship: | 16 Day(s) or more |
---|
Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model
MISUMI
A multi-functional type that's capable of everything from thrusting to continuous high-efficiency machining of aluminum
Days to Ship: | 16 Day(s) or more |
---|
(Economy series) XAL Series Carbide Square End Mill, 4-Flute / 2.5D Flute Length Model
MISUMI
The Misumi's original fine intermediate flute length is available at a reasonable price
Days to Ship: | Same day or more |
---|
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS
OSG
General purpose type 2-flute end mill with FX coating for excellent heat resistance. Can be used for a wide range of machining.
Days to Ship: | 10 Day(s) or more |
---|
Regular Grain Carbide End Mills 2 Flutes Short for Copper & Aluminum Alloys_CA-RG-EDS
OSG
For copper and aluminum alloys. Good sharpness, and a special blade shape for preventing chatter and vibrations that allows a good finished surface to be achieved.
Days to Ship: | 1 Day(s) or more |
---|
OSG
Can be used for a variety of cutter paths from high-precision, high-efficiency machining of the standing wall to helical machining, contouring machining and ramping machining. The amount of protrusion can be freely adjusted thanks to the fine-handle shank design.
Days to Ship: | 12 Day(s) or more |
---|
MX440 MUGEN-COATING 4-Flute LEAD 40 End Mill
NS TOOL
Deep processing is smooth, and deflection of machining surface has been minimized while employing a long blade
Days to Ship: | 16 Day(s) or more |
---|
MX445 MUGEN-COATING 4-Flute LEAD 45 End Mill
NS TOOL
Capable of high-precision and high-performance machining due to the unique, highly rigid design
Days to Ship: | 16 Day(s) or more |
---|
Epoch, Power Mill Regular Flute Length EPP4□□□ [Alteration Supported Product]
MITSUBISHI HITACHI TOOL
[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.
Features unequal division and irregular lead, which prevents chattering during high-speed high-efficiency processing.
Days to Ship: | 12 Day(s) |
---|
Epoch SUS Multi Under Head 5Dc EPSM4□□□-□□□.□-PN
MITSUBISHI HITACHI TOOL
Compatible with from rough processing to finishing processing of stainless steel, carbon steel, alloy steel, etc.
Days to Ship: | 12 Day(s) or more |
---|
DLGCAL2T DL-Coating 2-Flute Carbide for Aluminum
SANKO MFG
DLC coating provides excellent abrasion resistance and surface lubricity, preventing weld adhesion. Ideal for machining aluminum.
Days to Ship: | 16 Day(s) or more |
---|
ASAHI TOOLS
ø3 to ø7 are carbide tipped specifications.
Ideal for spot facing and hole bending repair.
·Machining applications (machining shape): flat surface / counterboring tool
·Materials: Carbide
·Work material: cast iron / aluminum / copper / resin
・ Coating: Uncoated
·Number of edges (Pcs.): 2
·Helix angle: no helix angle
Days to Ship: | 16 Day(s) or more |
---|
CoroMill Plura Carbide Square End Mill 2P
SANDVIK
High quality carbide end mill tools for a highly productive, efficient and reliable milling solution
Days to Ship: | 16 Day(s) or more |
---|
Carbide 4-Flute Variable Split Variable Lead End Mill with Neck 38°/41° F617HX
7 LEADERS
[Features]
· The neck of the end mill is made in a relief shape to prevent interference with the workpiece.
· 4-flute variable split / unequal lead and short blade length reduce chatter, enabling high-efficiency cutting.
· The multilayer coating uses nanoparticles.
· Excellent lubricity and abrasion resistance.
· Suitable for a wide range of work materials from general steel to high hardness steel.
Days to Ship: | 10 Day(s) or more |
---|
WNC Square End Mill 2 Flute WNC72/2
TOYO DRILL
[Features]
· The special-blend ultra-fine particle carbide alloy and unique blade shape provide excellent toughness and wear resistance as well as stable cutting and a long tool life.
Days to Ship: | 11 Day(s) or more |
---|
(Economy series) XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
The price of the low-cost classic XAL Series has been further reduced!
Special Price | |
Days to Ship: | Same day or more |
(Economy series) XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model
MISUMI
Popular XAL Series with the 4-flute structure that's ideal for side milling has been further reduced in price!
Days to Ship: | 16 Day(s) or more |
---|
XAC series carbide square end mill, 2-flute / short model
MISUMI
[Specification]
·Standard TiAlN coating
Days to Ship: | 16 Day(s) or more |
---|
XAC series carbide square end mill, 4-flute / long model
MISUMI
User friendly TiAlN coated series with long flute length
Days to Ship: | 16 Day(s) or more |
---|
TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Tool rigidity is emphasized by shortening the flute length and overall length for shrink fit
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Days to Ship: | 16 Day(s) or more |
---|
TSC series carbide square end mill, 2-flute / 1.5D Flute Length (stub) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Suitable for high-speed machining with stub flute length that is 1.5 times the cutting diameter
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Days to Ship: | 16 Day(s) or more |
---|
TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·General-purpose 2-flute end mill for a wide range of applications
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Days to Ship: | 16 Day(s) or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Specifications |
Blade diameter (D)(φ) |
Blade length (ℓ)(mm) |
Underneck length (ℓ1)(mm) |
Shank diameter (d)(mm) |
Number of flutes(sheet) |
Overall Length (L)(mm) |
work material |
Torsion Angle (θ) |
Machining Application |
Coating |
Blade tip shape |
Type |
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||
Brand | MISUMI | MISUMI | MITSUBISHI HITACHI TOOL | KYOWA SEIKO | MISUMI | MITSUBISHI HITACHI TOOL | MISUMI | OSG | NS TOOL | MITSUBISHI HITACHI TOOL | 7 LEADERS | MISUMI | NS TOOL | NS TOOL | MITSUBISHI HITACHI TOOL | NS TOOL | MITSUBISHI HITACHI TOOL | 7 LEADERS | OSG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | NS TOOL | NS TOOL | MITSUBISHI HITACHI TOOL | MITSUBISHI HITACHI TOOL | SANKO MFG | ASAHI TOOLS | SANDVIK | 7 LEADERS | TOYO DRILL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
Product Series | (Economy series) XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model | (Economy series) XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model | (Economy series) XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model | Epoch TH Power Mill (Square) EPPM4□□□TH [Alteration Supported Product] | Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill | Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE | Epoch TH Hard Regular Length CEPR□□□□-TH [Alteration Supported Product] | Carbide 3-Flute Variable Split Variable Lead End Mill 38°/41° E130HX | Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model | Epoch TH, Hard Long Flute Length CEPL□□□□-TH [Alteration Supported Product] | MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD 25 End Mill MXH225P | Carbide 4-Flute Variable Split Variable Lead End Mill 38°/41° E141-3.0HX | (Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model | Carbide square end mill, 2-flute / 2D Flute Length (short) model | Carbide square end mill, 4-flute / 2D Flute Length (short) model | TSC Series Carbide Roughing End Mill for Stainless Steel Machining | Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model | (Economy series) XAL Series Carbide Square End Mill, 4-Flute / 2.5D Flute Length Model | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS | Regular Grain Carbide End Mills 2 Flutes Short for Copper & Aluminum Alloys_CA-RG-EDS | Epoch, Power Mill Regular Flute Length EPP4□□□ [Alteration Supported Product] | Carbide 4-Flute Variable Split Variable Lead End Mill with Neck 38°/41° F617HX | (Economy series) XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model | (Economy series) XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model | TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model | TSC series carbide square end mill, 2-flute / 1.5D Flute Length (stub) model | TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model | ||||||||||||||||||
Days to Ship | Same day or more | Same day or more | 12 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 2 Day(s) or more | 16 Day(s) or more | 12 Day(s) | 12 Day(s) or more | 16 Day(s) or more | 10 Day(s) or more | 16 Day(s) or more | 12 Day(s) | 12 Day(s) or more | 12 Day(s) | 12 Day(s) or more | 2 Day(s) or more | Same day or more | Same day or more | 12 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | Same day or more | 10 Day(s) or more | 1 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 12 Day(s) | 12 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 10 Day(s) or more | 11 Day(s) or more | Same day or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||
Blade diameter (D)(φ) | 1 ~ 20 | 1 ~ 12 | 0.1 ~ 6 | 3 ~ 16 | 0.5 ~ 20 | 3 ~ 20 | 2 ~ 20 | 0.1 ~ 30 | 1 ~ 12 | 1 ~ 32 | 1 ~ 20 | 1 ~ 12 | 0.5 ~ 12 | 1 ~ 12 | 3 ~ 25 | 0.1 ~ 6 | 1 ~ 20 | 1 ~ 20 | 3 ~ 16 | 0.1 ~ 20 | 2 ~ 20 | 0.2 ~ 12 | 1 ~ 20 | 6 ~ 20 | 1 ~ 12 | 1.5 ~ 16 | 0.2 ~ 30 | 1 ~ 20 | 8 ~ 22 | 1 ~ 12 | 1 ~ 12 | 3 ~ 20 | 1 ~ 20 | 1 ~ 20 | 3 ~ 50 | 2 ~ 20 | 3 ~ 20 | 0.32 ~ 11.08 | 0.1 ~ 20 | 1 ~ 20 | 1 ~ 20 | 3 ~ 12 | 0.5 ~ 12 | 0.5 ~ 20 | 0.1 ~ 20 |
Blade length (ℓ)(mm) | 3 ~ 60 | 4 ~ 48 | 0.15 ~ 9 | 9 ~ 48 | 0.75 ~ 30 | 8 ~ 38 | 3 ~ 60 | 0.2 ~ 60 | 3 ~ 36 | 3.5 ~ 70 | 3 ~ 38 | 2 ~ 24 | 1 ~ 24 | 2 ~ 24 | 15 ~ 90 | 0.1 ~ 6 | 2.5 ~ 40 | 3 ~ 60 | 8 ~ 32 | 0.3 ~ 60 | 6 ~ 38 | 0.4 ~ 24 | 2 ~ 40 | 15 ~ 50 | 1.5 ~ 18 | 3.75 ~ 40 | 0.4 ~ 45 | 2.5 ~ 38 | 12 ~ 33 | 4 ~ 48 | 5 ~ 60 | 8 ~ 38 | 1.5 ~ 30 | 3 ~ 38 | 8 ~ 35 | - | 4 ~ 21 | 0.8 ~ 25 | 0.2 ~ 40 | 2 ~ 40 | 2.5 ~ 38 | 12 ~ 30 | 0.5 ~ 12 | 0.75 ~ 30 | 0.2 ~ 40 |
Underneck length (ℓ1)(mm) | - | - | 0.3 ~ 50 | - | - | - | - | - | - | - | - | 17 ~ 50 | - | - | - | - | 3 ~ 16 | - | - | - | - | 17 ~ 45 | 17 ~ 73 | - | 3 ~ 36 | - | - | - | - | - | - | - | 5 ~ 100 | - | 15 ~ 80 | - | 18 ~ 79 | - | - | - | - | - | - | - | 17 ~ 73 |
Shank diameter (d)(mm) | 4 ~ 20 | 4 ~ 12 | 4 ~ 6 | 6 ~ 16 | 4 ~ 20 | 6 ~ 20 | 4 ~ 20 | 4 ~ 32 | 4 ~ 12 | 6 ~ 32 | 4 ~ 20 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 6 ~ 25 | 4 ~ 6 | 4 ~ 20 | 4 ~ 20 | 6 ~ 16 | 3 ~ 20 | 4 ~ 20 | 3 ~ 12 | 4 ~ 20 | 6 ~ 20 | 4 ~ 12 | 4 ~ 16 | 3 ~ 32 | 4 ~ 20 | 6 ~ 20 | 4 ~ 12 | 4 ~ 12 | 6 ~ 20 | 6 ~ 20 | 4 ~ 20 | 10 ~ 32 | 2.9 ~ 20 | 6 ~ 20 | 3 ~ 12 | 3 ~ 20 | 4 ~ 20 | 4 ~ 20 | 6 ~ 12 | 4 ~ 12 | 4 ~ 20 | 3 ~ 20 |
Number of flutes(sheet) | 4 | 4 | 2 | 3 | 2 | 4 | 2 ~ 4 | 2 | 2 | 4 ~ 8 | 3 | 3 | 2 | 4 | 4 ~ 8 | 2 | 4 | 4 | 4 | 2 | 4 | 2 | 4 | 3 | 3 | 4 | 2 | 2 | 3 | 4 | 4 | 4 | 4 | 2 | 2 | 2 | 4 | 2 | 2 | 4 | 2 | 4 | 2 | 2 | 2 |
Overall Length (L)(mm) | 45 ~ 130 | 45 ~ 100 | 45 ~ 100 | 60 ~ 110 | 40 ~ 110 | 60 ~ 125 | 40 ~ 130 | 45 ~ 140 | 45 ~ 90 | 60 ~ 175 | 50 ~ 100 | 40 ~ 80 | 40 ~ 75 | 45 ~ 80 | 60 ~ 180 | 45 ~ 50 | 40 ~ 125 | 50 ~ 120 | 60 ~ 100 | 40 ~ 110 | 40 ~ 105 | 35 ~ 75 | 40 ~ 110 | 60 ~ 130 | 40 ~ 80 | 45 ~ 105 | 40 ~ 125 | 40 ~ 105 | 110 ~ 200 | 45 ~ 105 | 45 ~ 105 | 60 ~ 125 | 68 ~ 155 | 40 ~ 100 | 55 ~ 180 | 38 ~ 150 | 70 ~ 130 | 40 ~ 75 | 40 ~ 110 | 40 ~ 110 | 40 ~ 105 | 50 ~ 90 | 40 ~ 65 | 40 ~ 105 | 35 ~ 110 |
work material | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[◎] | Aluminum[○] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[○] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] |
Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Variable lead | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | No torsion | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
Machining Application | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Side / Groove | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Side | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Side | Plane / Side / Groove | Plane / Side / Plunging (Z feed) / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Countersinking | Plane / Side | Plane / Side / Groove / Inclined Cuts / Countersinking | - | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts |
Coating | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | DLC | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) / Non-Coated | For General Steels (AlCrN, etc.) | DLC | For High Hardness (Silicon Group) | - | Non-Coated | Non-Coated | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | - | - | For General Steels (AlCrN, etc.) | TiAlN | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | Non-Coated | For General Steels (AlCrN, etc.) | TiAlN | Non-Coated | Non-Coated | TiAlN | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | DLC | Non-Coated | - | - | Non-Coated | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) |
Blade tip shape | Sharp Edge / With Lead | Sharp Edge / With Lead | With Lead | - | Sharp Edge / With Lead | With Lead | With Lead | Sharp Edge | Sharp Edge | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge | Sharp Edge | With Lead | - | Sharp Edge / With Lead | Sharp Edge | Sharp Edge / With Lead | Sharp Edge / With Lead | C plane | With Lead | Sharp Edge / With Lead | Sharp Edge | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge | - | - | With Lead | - | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge | Sharp Edge | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead |
Type | Square | Square | Square | Square | Square | High Helical | Square | Square | Square | High Helical | Square | Square | Square | Square | High Helical | Square | Square | Square | Square | Square | Square | Square | Square | Roughing | Square | Square | Square | Square | Square | Square | Square | High Helical | Square | High Helical | Square | Square | Long-Neck Square | Square | Square | Square | Square | Square | Square | Square | Square |
Loading...
[4-60/1mm Unit(s)]
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy