(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Square End Mills (Carbide)（Coating：Non-Coated）

158 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 3 Day(s) or Less 8 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 15 Day(s) or Less

1
2
3
4
Next >>

Carbide square end mill, 2-flute / 2D Flute Length (short) model

MISUMI

Excellent in general versatility, it is a 2D flute length type that can be used in a wide range of applications

Volume Discount

Non-Coated

General Steel

2 Flutes

S (Short)
Days to Ship: 12 Day(s) or more
Carbide square end mill, 2-flute / 3D Flute Length (regular) model

MISUMI

The 3D flute length type that produces high-quality finish supports a wide range of machining areas

Volume Discount

Non-Coated

General Steel

2 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
2-flute short type MG-EDS [Alterations Available]

OSG

[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.

It's a pinkado.

Days to Ship: 16 Day(s) or more
Regular Grain Carbide End Mills 2 Flutes Short for Copper & Aluminum Alloys_CA-RG-EDS

OSG

For copper and aluminum alloys. Good sharpness, and a special blade shape for preventing chatter and vibrations that allows a good finished surface to be achieved.

Days to Ship: 1 Day(s) or more
Carbide square end mill, 4-flute / 4D Flute Length (long) model

MISUMI

Achieves both high levels of machining precision and reduction of processing time in side milling

Volume Discount

Non-Coated

General Steel

4 Flutes

L (Long)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model

MISUMI

Achieves high-efficiency machining with the 3-geometry that's emphasized the rigidity!

Volume Discount

Non-Coated

Aluminum

3 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill

MISUMI

[Features]
·Alteration end mill that can specify corner chamfer size of carbide end mill in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Non-Coated

General Steel
Days to Ship: 12 Day(s) or more
Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model

MISUMI

The blade diameter of 0.01 mm increments can be selected from the extensive variations of flute length

Volume Discount

Non-Coated

General Steel

2 Flutes
Days to Ship: 11 Day(s) or more
ALZ345 High-Efficiency Heavy Cutting End Mill for Aluminum

NS TOOL

Capable of stable high efficiency machining under all conditions. High-efficiency heavy cutting type with enhanced chip discharge performance

Days to Ship: 16 Day(s) or more
NX-35 Lead 35 End Mill

NS TOOL

The blade length is 3x the blade diameter and the torsion angle is 35°. Features a slightly larger torsion angle than standard torsion and enables high efficiency machining

Days to Ship: 10 Day(s) or more
PCD square end mill PCDSE

NS TOOL

A highly stable cutting surface has been realized for cutting cemented carbide. Nano-level surface roughness required for high-precision machining can be achieved

Days to Ship: 16 Day(s) or more
Solid Spiral End Mill SSM2000 Type

SUMITOMO ELECTRIC HARDMETAL

Standard type of SSM type.
Work Material: General Steel/Cast Iron/Aluminum
Coating: Uncoated
Standard/Alteration Category: Manufacturer's standard product, Number of flutes (pcs.) 2
corner shape: sharp corner
Helix angle: Standard helix (30 to 44°)

Days to Ship: 16 Day(s) or more
SLE2 Long Shank Slotting End Mill G2

ASAHI TOOLS

φ3 to φ7 are tip brazing types. Uses a long shank to increase the versatility of the protruding length.

Days to Ship: 16 Day(s) or more
SED2 Square End Mill, 2-Flute, Non-Coated

OKAZAKI SEIKO

An end mill with an abundant range of blade diameters which can be used for machining non-ferrous materials through to steel.

Days to Ship: 10 Day(s) or more
Spiral Cut End Mill SPC type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Days to Ship: 16 Day(s) or more
Carbide Miniature End Mill KMSE‐2

KYOWA SEIKO

[Applications]It can be used for flat surface, side, groove, plunge (Z feed), inclined cutting, and counterbore machining. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

Days to Ship: 12 Day(s) or more
Router for CFRP (2-Flute / Herringbone Type)

OSG

[Features]
· CFRP Router Series
[Applications]
· Work materials: Composite materials.
[Material]
· Cemented Carbide

Days to Ship: 16 Day(s) or more
Carbide square end mill, 4-flute / 2D Flute Length (short) model

MISUMI

The 2D flute length type with high versatility achieves high-precision processing including grooving

Volume Discount

Non-Coated

General Steel

4 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
Carbide square end mill, 4-flute / 3D Flute Length (regular) model

MISUMI

The 3D flute length type that's capable of sophisticated grooving is also known for the producing the high-quality finish

Volume Discount

Non-Coated

General Steel

4 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model

MISUMI

A multi-functional type that's capable of everything from thrusting to continuous high-efficiency machining of aluminum

Volume Discount

Non-Coated

Aluminum

3 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining/2-Flute/45° Spiral/Flute Length 2D (Short) Type

MISUMI

A non-coated type that does not impair the sharpness of the blade

Volume Discount

Non-Coated

Aluminum

2 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining / 2-Flute / 45° Spiral / 3D Blade Length (Regular) Type

MISUMI

Affordable, non-coated type of the Aluminum Processing Series

Volume Discount

Non-Coated

Aluminum

2 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model

MISUMI

The large rake angle prevents the built-up edge that's unique to aluminum

Volume Discount

Non-Coated

Aluminum

2 Flutes

L (Long)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining, 2-Flute / Extra Long Model

MISUMI

Achieves the standing-wall machining of aluminum in the first shot! flute length of 5 Times the Blade Diameter

Volume Discount

Non-Coated

Aluminum

2 Flutes

EXL (Extra Long)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model

MISUMI

3-flute structure that's excellent in discharging chips

Volume Discount

Non-Coated

Aluminum

3 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular Model

MISUMI

[Features]
·Uses a sharp cutting edge to suppress the built-up edge unique to aluminum
·The unique chip pocket shape enables grooving with a depth of cut equivalent to that of a 2-flute cutting tool.
·Can be re-polished. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

Volume Discount

Non-Coated

Aluminum

4 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

MISUMI

2 types that are recommended in the standing-wall machining of aluminum

Volume Discount

Non-Coated

Aluminum

3 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Slim Shank Model

MISUMI

2 types that are recommended in the standing-wall machining of aluminum

Volume Discount

Non-Coated

Aluminum

3 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Regular Model

MISUMI

A non-coated type that has achieved both the cost reduction and processing performance

Volume Discount

Non-Coated

Copper

2 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Graphite Machining, 2-Flute / Non-Coated, Long Model

MISUMI

[Features]
·Uncoated product with excellent cost-effectiveness
·Deep digging is possible due to long flute length
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated

Graphite

2 Flutes

L (Long)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Graphite Machining, 4-Flute / Non-Coated, Long Model

MISUMI

[Features]
·Uncoated product with excellent cost-effectiveness
·Deep digging is possible due to long flute length
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated

Graphite

4 Flutes

L (Long)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Resin Machining, 2-Flute / Regular Model

MISUMI

The cutting edge with an emphasis on sharpness is ideal for resin machining

Volume Discount

Non-Coated

Resin

2 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Resin Machining, 2-Flute / Extra Long Model

MISUMI

Extra long type for resin that's capable of deep processing in the first shot

Volume Discount

Non-Coated

Resin

2 Flutes

EXL (Extra Long)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Resin Machining, 2-Flute / Regular, Long Shank Model

MISUMI

Available in 10 sizes including the long shank type

Volume Discount

Non-Coated

Resin

2 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
Carbide Blade Neck Relief End Mill, 2-Flute / Short Model

MISUMI

A blade relief type that's not affected by the interference of tools

General Steel

2 Flutes

S (Short)
Days to Ship: 18 Day(s) or more
Carbide Blade Neck Relief End Mill, 2-Flute / Regular Model

MISUMI

A blade relief type that's not affected by the interference of tools

General Steel

2 Flutes

R (Regular)
Days to Ship: 18 Day(s) or more
Carbide Blade Neck Relief End Mill, 4-Flute / Short Model

MISUMI

Blade relief type with a 4-flute structure

General Steel

4 Flutes

S (Short)
Days to Ship: 18 Day(s) or more
Carbide Blade Neck Relief End Mill, 4-Flute / Regular Model

MISUMI

Blade relief type with a 4-flute structure

General Steel

4 Flutes

R (Regular)
Days to Ship: 18 Day(s) or more
Carbide Square End Mill for Aluminum Machining/2-Flute/55° Spiral/Flute Length 2D (Short) Type

MISUMI

Aluminum processing end mills that have pursued the machined surface accuracy are available at ultra-low prices

Volume Discount

Non-Coated

Aluminum

2 Flutes
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining / 2-Flute / 55° Spiral / 3D Blade Length (Regular) Type

MISUMI

Achieves standing-wall machining with high surface accuracy in a single shot! The flute length of 3 times the outer diameter is available at an ultra low price

Volume Discount

Non-Coated

Aluminum

2 Flutes
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining, 2-Flute / 5D Flute Length (Extra Long) Model

MISUMI

Achieves standing-wall machining with high surface accuracy in a single shot! The flute length of 5 times the outer diameter is available at an ultra low price

Volume Discount

Non-Coated

Aluminum

2 Flutes
Days to Ship: 16 Day(s) or more
Micro Grain Carbide End Mills 2 Flutes Extra Long_MG-EXDL

OSG

Non-coated, 2-flute, and extra-long.

Days to Ship: 16 Day(s) or more
2-Flute Keyway (OH1) MG-EKD [Alterations Available]

OSG

[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.

for keyway (OH1)

Days to Ship: 12 Day(s) or more
2-Flute Keyway (OL1) MG-EKD [Alterations Available]

OSG

[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.

for keyway (OL1)

Days to Ship: 16 Day(s) or more
Micro Grain Carbide End Mills 2 Flutes Medium_MG-EDN

OSG

[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.

It's a pinkado.

Days to Ship: 16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	1 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	18 Day(s) or more

Days to Ship:	18 Day(s) or more

Days to Ship:	18 Day(s) or more

Days to Ship:	18 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more


Brand
Product Series
CAD
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type


Brand	MISUMI	MISUMI	OSG	OSG	MISUMI	MISUMI	MISUMI	MISUMI	NS TOOL	NS TOOL	NS TOOL	SUMITOMO ELECTRIC HARDMETAL	ASAHI TOOLS	OKAZAKI SEIKO	DIJET	KYOWA SEIKO	OSG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG
Product Series	Carbide square end mill, 2-flute / 2D Flute Length (short) model	Carbide square end mill, 2-flute / 3D Flute Length (regular) model	2-flute short type MG-EDS [Alterations Available]	Regular Grain Carbide End Mills 2 Flutes Short for Copper & Aluminum Alloys_CA-RG-EDS	Carbide square end mill, 4-flute / 4D Flute Length (long) model	Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model	Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill	Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model	ALZ345 High-Efficiency Heavy Cutting End Mill for Aluminum	NX-35 Lead 35 End Mill	PCD square end mill PCDSE	Solid Spiral End Mill SSM2000 Type	SLE2 Long Shank Slotting End Mill G2	SED2 Square End Mill, 2-Flute, Non-Coated	Spiral Cut End Mill SPC type	Carbide Miniature End Mill KMSE‐2	Router for CFRP (2-Flute / Herringbone Type)	Carbide square end mill, 4-flute / 2D Flute Length (short) model	Carbide square end mill, 4-flute / 3D Flute Length (regular) model	Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model	Carbide Square End Mill for Aluminum Machining/2-Flute/45° Spiral/Flute Length 2D (Short) Type	Carbide Square End Mill for Aluminum Machining / 2-Flute / 45° Spiral / 3D Blade Length (Regular) Type	Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model	Carbide Square End Mill for Aluminum Machining, 2-Flute / Extra Long Model	Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model	Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular Model	Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model	Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Slim Shank Model	Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Regular Model	Carbide Square End Mill for Graphite Machining, 2-Flute / Non-Coated, Long Model	Carbide Square End Mill for Graphite Machining, 4-Flute / Non-Coated, Long Model	Carbide Square End Mill for Resin Machining, 2-Flute / Regular Model	Carbide Square End Mill for Resin Machining, 2-Flute / Extra Long Model	Carbide Square End Mill for Resin Machining, 2-Flute / Regular, Long Shank Model	Carbide Blade Neck Relief End Mill, 2-Flute / Short Model	Carbide Blade Neck Relief End Mill, 2-Flute / Regular Model	Carbide Blade Neck Relief End Mill, 4-Flute / Short Model	Carbide Blade Neck Relief End Mill, 4-Flute / Regular Model	Carbide Square End Mill for Aluminum Machining/2-Flute/55° Spiral/Flute Length 2D (Short) Type	Carbide Square End Mill for Aluminum Machining / 2-Flute / 55° Spiral / 3D Blade Length (Regular) Type	Carbide Square End Mill for Aluminum Machining, 2-Flute / 5D Flute Length (Extra Long) Model	Micro Grain Carbide End Mills 2 Flutes Extra Long_MG-EXDL	2-Flute Keyway (OH1) MG-EKD [Alterations Available]	2-Flute Keyway (OL1) MG-EKD [Alterations Available]	Micro Grain Carbide End Mills 2 Flutes Medium_MG-EDN
CAD
Days to Ship	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	1 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	11 Day(s) or more	16 Day(s) or more	10 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	10 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	18 Day(s) or more	18 Day(s) or more	18 Day(s) or more	18 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more
Specifications	Non-Coated General Steel 2 Flutes S (Short)	Non-Coated General Steel 2 Flutes R (Regular)			Non-Coated General Steel 4 Flutes L (Long)	Non-Coated Aluminum 3 Flutes R (Regular)	Non-Coated General Steel	Non-Coated General Steel 2 Flutes										Non-Coated General Steel 4 Flutes S (Short)	Non-Coated General Steel 4 Flutes R (Regular)	Non-Coated Aluminum 3 Flutes B (Stub)	Non-Coated Aluminum 2 Flutes S (Short)	Non-Coated Aluminum 2 Flutes R (Regular)	Non-Coated Aluminum 2 Flutes L (Long)	Non-Coated Aluminum 2 Flutes EXL (Extra Long)	Non-Coated Aluminum 3 Flutes S (Short)	Non-Coated Aluminum 4 Flutes R (Regular)	Non-Coated Aluminum 3 Flutes B (Stub)	Non-Coated Aluminum 3 Flutes B (Stub)	Non-Coated Copper 2 Flutes R (Regular)	Non-Coated Graphite 2 Flutes L (Long)	Non-Coated Graphite 4 Flutes L (Long)	Non-Coated Resin 2 Flutes R (Regular)	Non-Coated Resin 2 Flutes EXL (Extra Long)	Non-Coated Resin 2 Flutes R (Regular)	General Steel 2 Flutes S (Short)	General Steel 2 Flutes R (Regular)	General Steel 4 Flutes S (Short)	General Steel 4 Flutes R (Regular)	Non-Coated Aluminum 2 Flutes	Non-Coated Aluminum 2 Flutes	Non-Coated Aluminum 2 Flutes
Blade diameter (D)(φ)	0.2 ～ 12	0.2 ～ 12	1 ～ 25	1 ～ 20	1 ～ 12	0.5 ～ 20	2 ～ 20	3.15 ～ 19.99	1 ～ 12	0.5 ～ 12	0.1 ～ 1	2	3 ～ 30	0.4 ～ 32	15 ～ 38	0.1 ～ 3	6 ～ 12	1 ～ 20	2 ～ 20	1 ～ 12	0.5 ～ 20	0.5 ～ 20	3 ～ 12	3 ～ 12	1 ～ 12	0.5 ～ 12	5 ～ 22	6.2 ～ 16.2	0.5 ～ 20	1 ～ 12	2 ～ 12	0.3 ～ 16	0.3 ～ 12	1 ～ 10	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12	0.5 ～ 20	0.5 ～ 20	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12
Blade length (ℓ)(mm)	0.4 ～ 24	0.6 ～ 36	2.5 ～ 45	2.5 ～ 38	4 ～ 48	1.5 ～ 60	4 ～ 60	3.5 ～ 48	1.5 ～ 18	1.5 ～ 36	0.02 ～ 0.2	6	8 ～ 21	1 ～ 55	26 ～ 55	0.2 ～ 8	18 ～ 36	2 ～ 40	5 ～ 60	1.5 ～ 18	1 ～ 40	1.5 ～ 60	5 ～ 48	15 ～ 60	2 ～ 24	1.5 ～ 28	9 ～ 33	9 ～ 24	1.5 ～ 60	5 ～ 60	10 ～ 60	0.9 ～ 48	1.5 ～ 48	3 ～ 20	-	-	-	-	1 ～ 40	1.5 ～ 60	15 ～ 60	20 ～ 90	5 ～ 16	5 ～ 16	10 ～ 34
Underneck length (ℓ1)(mm)	17 ～ 45	23 ～ 55	-	-	29 ～ 70	23 ～ 92	-	-	3 ～ 36	-	0.1 ～ 1	-	15 ～ 41	-	-	-	-	17 ～ 73	23 ～ 92	3 ～ 36	17 ～ 73	23 ～ 92	29 ～ 70	-	17 ～ 50	22 ～ 50	-	-	-	10 ～ 85	20 ～ 85	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Shank diameter (d)(mm)	3 ～ 12	3 ～ 12	4 ～ 25	4 ～ 20	4 ～ 12	4 ～ 20	4 ～ 20	6 ～ 20	4 ～ 12	4 ～ 12	4	4	10 ～ 32	4 ～ 32	16 ～ 32	3	6 ～ 12	4 ～ 20	4 ～ 20	4 ～ 12	4 ～ 20	4 ～ 20	6 ～ 12	6 ～ 12	4 ～ 12	4 ～ 12	4 ～ 20	6 ～ 16	4 ～ 20	4 ～ 12	4 ～ 12	3 ～ 16	3 ～ 12	1 ～ 10	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12	4 ～ 20	4 ～ 20	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12
Number of flutes(sheet)	2	2	2	2	4	3	2 ～ 4	2	3	2	2 ～ 6	2	2	2	4 ～ 6	2	2	4	4	3	2	2	2	2	3	4	3	3	2	2	4	2	2	2	2	2	4	4	2	2	2	2	2	2	2
Overall Length (L)(mm)	35 ～ 75	40 ～ 85	40 ～ 120	40 ～ 105	45 ～ 100	40 ～ 130	40 ～ 130	40 ～ 105	45 ～ 80	40 ～ 85	48	40	100 ～ 220	45 ～ 130	84 ～ 123	40	68 ～ 86	40 ～ 110	45 ～ 130	40 ～ 80	40 ～ 110	40 ～ 130	60 ～ 100	60 ～ 130	40 ～ 80	40 ～ 80	80 ～ 200	80 ～ 180	50 ～ 130	75 ～ 200	75 ～ 200	45 ～ 110	40 ～ 110	65 ～ 180	45 ～ 75	60 ～ 85	45 ～ 75	60 ～ 85	40 ～ 110	40 ～ 130	60 ～ 130	60 ～ 150	45 ～ 75	45 ～ 75	50 ～ 90
work material	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	-	general steel[◎] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	No torsion	Standard torsion (30-40°)	No torsion	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Machining Application	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Groove	Plane / Countersinking	Plane / Side / Groove	Groove / Plunging (Z feed)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	-	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove	Plane / Side	Plane / Side	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts
Coating	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated
Blade tip shape	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge / With Lead	With Lead	With Lead	With Lead	Sharp Edge	-	Sharp Edge	C plane	Sharp Edge	-	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	With Lead	Sharp Edge	Micro R	Micro R	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	-	Sharp Edge	With Lead	With Lead	With Lead	With Lead	-	-	-	With Lead	With Lead	With Lead	Sharp Edge
Type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square

1
2
3
4
Next >>

Configure

Specification/Dimensions

Blade diameter (D)(φ)
- 0.01～0.99
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.09
  - 0.1
  - 0.11
  - 0.12
  - 0.13
  - 0.14
  - 0.15
  - 0.16
  - 0.17
  - 0.18
  - 0.19
  - 0.2
  - 0.21
  - 0.22
  - 0.23
  - 0.24
  - 0.25
  - 0.26
  - 0.27
  - 0.28
  - 0.29
  - 0.3
  - 0.31
  - 0.32
  - 0.33
  - 0.34
  - 0.35
  - 0.36
  - 0.37
  - 0.38
  - 0.39
  - 0.4
  - 0.41
  - 0.42
  - 0.43
  - 0.44
  - 0.45
  - 0.46
  - 0.47
  - 0.48
  - 0.49
  - 0.5
  - 0.51
  - 0.52
  - 0.53
  - 0.54
  - 0.55
  - 0.56
  - 0.57
  - 0.58
  - 0.59
  - 0.6
  - 0.61
  - 0.62
  - 0.63
  - 0.64
  - 0.65
  - 0.66
  - 0.67
  - 0.68
  - 0.69
  - 0.7
  - 0.71
  - 0.72
  - 0.73
  - 0.74
  - 0.75
  - 0.76
  - 0.77
  - 0.78
  - 0.79
  - 0.8
  - 0.81
  - 0.82
  - 0.83
  - 0.84
  - 0.85
  - 0.86
  - 0.87
  - 0.88
  - 0.89
  - 0.9
  - 0.91
  - 0.92
  - 0.93
  - 0.94
  - 0.95
  - 0.96
  - 0.97
  - 0.98
  - 0.99
- 1～1.99
  - 1
  - 1.01
  - 1.02
  - 1.03
  - 1.04
  - 1.05
  - 1.06
  - 1.07
  - 1.08
  - 1.09
  - 1.1
  - 1.11
  - 1.12
  - 1.13
  - 1.14
  - 1.15
  - 1.16
  - 1.17
  - 1.18
  - 1.19
  - 1.2
  - 1.21
  - 1.22
  - 1.23
  - 1.24
  - 1.25
  - 1.26
  - 1.27
  - 1.28
  - 1.29
  - 1.3
  - 1.31
  - 1.32
  - 1.33
  - 1.34
  - 1.35
  - 1.36
  - 1.37
  - 1.38
  - 1.39
  - 1.4
  - 1.41
  - 1.42
  - 1.43
  - 1.44
  - 1.45
  - 1.46
  - 1.47
  - 1.48
  - 1.49
  - 1.5
  - 1.51
  - 1.52
  - 1.53
  - 1.54
  - 1.55
  - 1.56
  - 1.57
  - 1.58
  - 1.59
  - 1.6
  - 1.61
  - 1.62
  - 1.63
  - 1.64
  - 1.65
  - 1.66
  - 1.67
  - 1.68
  - 1.69
  - 1.7
  - 1.71
  - 1.72
  - 1.73
  - 1.74
  - 1.75
  - 1.76
  - 1.77
  - 1.78
  - 1.79
  - 1.8
  - 1.81
  - 1.82
  - 1.83
  - 1.84
  - 1.85
  - 1.86
  - 1.87
  - 1.88
  - 1.89
  - 1.9
  - 1.91
  - 1.92
  - 1.93
  - 1.94
  - 1.95
  - 1.96
  - 1.97
  - 1.98
  - 1.99
- 2～2.99
  - 2
  - 2.01
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.39
  - 2.4
  - 2.41
  - 2.42
  - 2.43
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.49
  - 2.5
  - 2.51
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.62
  - 2.63
  - 2.64
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.71
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.92
  - 2.93
  - 2.94
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.84
  - 4.85
  - 4.86
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.56
  - 5.57
  - 5.58
  - 5.59
  - 5.6
  - 5.61
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.9
  - 6
  - 6.01
  - 6.05
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.57
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.99
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.1
  - 7.11
  - 7.12
  - 7.13
  - 7.14
  - 7.15
  - 7.16
  - 7.17
  - 7.18
  - 7.19
  - 7.2
  - 7.21
  - 7.22
  - 7.23
  - 7.24
  - 7.25
  - 7.26
  - 7.27
  - 7.28
  - 7.29
  - 7.3
  - 7.31
  - 7.32
  - 7.33
  - 7.34
  - 7.35
  - 7.36
  - 7.37
  - 7.38
  - 7.39
  - 7.4
  - 7.41
  - 7.42
  - 7.43
  - 7.44
  - 7.45
  - 7.46
  - 7.47
  - 7.48
  - 7.49
  - 7.5
  - 7.51
  - 7.52
  - 7.53
  - 7.54
  - 7.55
  - 7.56
  - 7.57
  - 7.58
  - 7.59
  - 7.6
  - 7.61
  - 7.62
  - 7.63
  - 7.64
  - 7.65
  - 7.66
  - 7.67
  - 7.68
  - 7.69
  - 7.7
  - 7.71
  - 7.72
  - 7.73
  - 7.74
  - 7.75
  - 7.76
  - 7.77
  - 7.78
  - 7.79
  - 7.8
  - 7.81
  - 7.82
  - 7.83
  - 7.84
  - 7.85
  - 7.86
  - 7.87
  - 7.88
  - 7.89
  - 7.9
  - 7.91
  - 7.92
  - 7.93
  - 7.94
  - 7.95
  - 7.96
  - 7.97
  - 7.98
  - 7.99
- 8～8.9
  - 8
  - 8.01
  - 8.02
  - 8.1
  - 8.15
  - 8.2
  - 8.21
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.75
  - 8.8
  - 8.9
- 9～9.99
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.1
  - 9.11
  - 9.12
  - 9.13
  - 9.14
  - 9.15
  - 9.16
  - 9.17
  - 9.18
  - 9.19
  - 9.2
  - 9.21
  - 9.22
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.27
  - 9.28
  - 9.29
  - 9.3
  - 9.31
  - 9.32
  - 9.33
  - 9.34
  - 9.35
  - 9.36
  - 9.37
  - 9.38
  - 9.39
  - 9.4
  - 9.41
  - 9.42
  - 9.43
  - 9.44
  - 9.45
  - 9.46
  - 9.47
  - 9.48
  - 9.49
  - 9.5
  - 9.51
  - 9.52
  - 9.53
  - 9.54
  - 9.55
  - 9.56
  - 9.57
  - 9.58
  - 9.59
  - 9.6
  - 9.61
  - 9.62
  - 9.63
  - 9.64
  - 9.65
  - 9.66
  - 9.67
  - 9.68
  - 9.69
  - 9.7
  - 9.71
  - 9.72
  - 9.73
  - 9.74
  - 9.75
  - 9.76
  - 9.77
  - 9.78
  - 9.79
  - 9.8
  - 9.81
  - 9.82
  - 9.83
  - 9.84
  - 9.85
  - 9.86
  - 9.87
  - 9.88
  - 9.89
  - 9.9
  - 9.91
  - 9.92
  - 9.93
  - 9.94
  - 9.95
  - 9.96
  - 9.97
  - 9.98
  - 9.99
- 10～10.9
  - 10
  - 10.1
  - 10.15
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.99
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.12
  - 11.13
  - 11.14
  - 11.15
  - 11.16
  - 11.17
  - 11.18
  - 11.19
  - 11.2
  - 11.21
  - 11.22
  - 11.23
  - 11.24
  - 11.25
  - 11.26
  - 11.27
  - 11.28
  - 11.29
  - 11.3
  - 11.31
  - 11.32
  - 11.33
  - 11.34
  - 11.35
  - 11.36
  - 11.37
  - 11.38
  - 11.39
  - 11.4
  - 11.41
  - 11.42
  - 11.43
  - 11.44
  - 11.45
  - 11.46
  - 11.47
  - 11.48
  - 11.49
  - 11.5
  - 11.51
  - 11.52
  - 11.53
  - 11.54
  - 11.55
  - 11.56
  - 11.57
  - 11.58
  - 11.59
  - 11.6
  - 11.61
  - 11.62
  - 11.63
  - 11.64
  - 11.65
  - 11.66
  - 11.67
  - 11.68
  - 11.69
  - 11.7
  - 11.71
  - 11.72
  - 11.73
  - 11.74
  - 11.75
  - 11.76
  - 11.77
  - 11.78
  - 11.79
  - 11.8
  - 11.81
  - 11.82
  - 11.83
  - 11.84
  - 11.85
  - 11.86
  - 11.87
  - 11.88
  - 11.89
  - 11.9
  - 11.91
  - 11.92
  - 11.93
  - 11.94
  - 11.95
  - 11.96
  - 11.97
  - 11.98
  - 11.99
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.99
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.51
  - 15.52
  - 15.53
  - 15.54
  - 15.55
  - 15.56
  - 15.57
  - 15.58
  - 15.59
  - 15.6
  - 15.61
  - 15.62
  - 15.63
  - 15.64
  - 15.65
  - 15.66
  - 15.67
  - 15.68
  - 15.69
  - 15.7
  - 15.71
  - 15.72
  - 15.73
  - 15.74
  - 15.75
  - 15.76
  - 15.77
  - 15.78
  - 15.79
  - 15.8
  - 15.81
  - 15.82
  - 15.83
  - 15.84
  - 15.85
  - 15.86
  - 15.87
  - 15.88
  - 15.89
  - 15.9
  - 15.91
  - 15.92
  - 15.93
  - 15.94
  - 15.95
  - 15.96
  - 15.97
  - 15.98
  - 15.99
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.99
  - 19
  - 19..5
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.51
  - 19.52
  - 19.53
  - 19.54
  - 19.55
  - 19.56
  - 19.57
  - 19.58
  - 19.59
  - 19.6
  - 19.61
  - 19.62
  - 19.63
  - 19.64
  - 19.65
  - 19.66
  - 19.67
  - 19.68
  - 19.69
  - 19.7
  - 19.71
  - 19.72
  - 19.73
  - 19.74
  - 19.75
  - 19.76
  - 19.77
  - 19.78
  - 19.79
  - 19.8
  - 19.81
  - 19.82
  - 19.83
  - 19.84
  - 19.85
  - 19.86
  - 19.87
  - 19.88
  - 19.89
  - 19.9
  - 19.91
  - 19.92
  - 19.93
  - 19.94
  - 19.95
  - 19.96
  - 19.97
  - 19.98
  - 19.99
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5
  - 24
  - 24.5
- 25～25.5
  - 25
  - 25.5
- 26～26.5
  - 26
  - 26.5
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
Drawing

Clear

Blade length (ℓ)(mm)
- 0.01～0.9
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.045
  - 0.05
  - 0.06
  - 0.07
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.105
  - 0.12
  - 0.135
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.25
  - 0.3
  - 0.32
  - 0.4
  - 0.45
  - 0.5
  - 0.6
  - 0.7
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.25
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.8
  - 12.9
- 13～13.8
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.8
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.6
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
- 18～18.8
  - 18
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.8
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.6
  - 19.8
- 20～20.8
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.7
  - 20.8
- 21～21.9
  - 21
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.8
  - 21.9
- 22～22.8
  - 22
  - 22.2
  - 22.4
  - 22.5
  - 22.6
  - 22.8
- 23～23.8
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.8
- 24～24.9
  - 24
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.8
  - 24.9
- 25～25.8
  - 25
  - 25.2
  - 25.4
  - 25.5
  - 25.6
  - 25.8
- 26～26.8
  - 26
  - 26.2
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
- 27～27.9
  - 27
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.8
  - 27.9
- 28～28.8
  - 28
  - 28.2
  - 28.4
  - 28.5
  - 28.8
- 29～29.7
  - 29
  - 29.1
  - 29.2
  - 29.5
  - 29.6
  - 29.7
- 30～30.9
  - 30
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.8
  - 30.9
- 31～31.8
  - 31
  - 31.2
  - 31.5
  - 31.6
  - 31.8
- 32～32.8
  - 32
  - 32.1
  - 32.4
  - 32.5
  - 32.7
  - 32.8
- 33～33.9
  - 33
  - 33.2
  - 33.3
  - 33.6
  - 33.9
- 34～34.8
  - 34
  - 34.2
  - 34.4
  - 34.5
  - 34.8
- 35～35.7
  - 35
  - 35.1
  - 35.2
  - 35.4
  - 35.5
  - 35.6
  - 35.7
- 36～36.8
  - 36
  - 36.4
  - 36.5
  - 36.8
- 37～37.6
  - 37
  - 37.2
  - 37.5
  - 37.6
- 38～38.8
  - 38
  - 38.4
  - 38.5
  - 38.8
- 39～39.6
  - 39
  - 39.2
  - 39.5
  - 39.6
- 40～40.8
  - 40
  - 40.4
  - 40.5
  - 40.8
- 41～41.6
  - 41
  - 41.2
  - 41.5
  - 41.6
- 42～42.8
  - 42
  - 42.4
  - 42.5
  - 42.8
- 43～43.6
  - 43
  - 43.2
  - 43.5
  - 43.6
- 44～44.8
  - 44
  - 44.4
  - 44.5
  - 44.8
- 45～45.5
  - 45
  - 45.2
  - 45.5
- 46～46.8
  - 46
  - 46.4
  - 46.5
  - 46.8
- 47～47.6
  - 47
  - 47.2
  - 47.5
  - 47.6
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.5
  - 50
  - 50.5
- 51～51.5
  - 51
  - 51.5
- 52
- 53～53.5
  - 53
  - 53.5
- 54～54.5
  - 54
  - 54.5
- 55～55.5
  - 55
  - 55.5
- 56
- 57.5
- 58～58.5
  - 58
  - 58.5
- 59～59.5
  - 59
  - 59.5
- 60
- 63
- 64
- 65
- 67
- 70
- 75
- 80
- 83
- 85
- 90
- 95
- 100
- 103
- 106
- 110
- 112
- 120
- 130
- 150
- 200
[5-60/1mm Unit(s)]

Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.1～0.9
  - 0.1
  - 0.2
  - 0.3
  - 0.4
  - 0.5
  - 0.6
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.5
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.5
  - 2
  - 2.1
  - 2.4
  - 2.5
- 3～3.8
  - 3
  - 3.2
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.5
- 5
- 6
- 7～7.5
  - 7
  - 7.5
- 8
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14
- 15
- 16～16.5
  - 16
  - 16.5
- 17～17.5
  - 17
  - 17.5
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 60
- 62
- 64
- 65
- 66
- 70
- 74
- 76
- 79
- 80
- 82
- 85
- 94
- 100
- 120
- 125
- 130
- 150
- 200
[17-92/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
1

1.5

2

2.90

3

3.175

3.80

4

4.80

5

5.8

6

6.35

6.8

7

7.8

8

8.8

9

9.70

9.8

10

11

11.70

12

13

14

15

15.70

16

17

18

19.70

20

25

30

32

42
Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6

8

10

12

14
Clear

Overall Length (L)(mm)
11

13

15

16

18

20

22

25

28

32

35

36

37

38

38.1

39

40

42

43

45

48

49

50

51

52

53

54

55

56

57

58

60

62

63

63.5

65

66

67

68

70

72

73

74

75

76

78

79

80

82

83

84

85

86

87

88

89

90

92

93

94

95

97

99

100

104

105

107

108

109

110

111

113

114

115

117

118

120

121

123

125

126

130

135

140

145

150

155

160

165

170

175

180

190

200

210

220

225

230

240

250

260

270

280

300

310

320

350
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear